How do I set the default library with "Save As" ?

I use FIrefox. When I want to "Save As" a PDF file, the default library always resets instead of going to the last location where I saved something. How can I set the "Save As" default location to be a specific place?

Are you using the Save As command of Firefox or of Reader? If the former then it's a question more suited for a FF forum. If the latter I'm afraid the answer is you can't change it.

Similar Messages

How do I set the iPhoto library as the Aperture default library?

I missed the opportunity on first opening Aperture to set the iPhoto library as the one that Aperture uses as the default, and now cannot find out how to do that after that point (it was getting late by the time I had found, installed and updated a copy of Aperture for my Mavericks based system).
How can I set the iPhoto library as the default, I don't want to have to select the iPhoto library every time I open aperture, but even knowing how to do that would be an improvement on my current knowledge!
TIA

That's what I read, but aren't they the minimum specs? Do you know what the upper specs are for using them together? Eg 3.4.5 won't work with iPhoto x.x etc?
I bought a Retail copy of Aperture 3.0.2 then downloaded the latest Maverick copy of Aperture I could as an upgrade (3.4.5) from the Apple Support site. But there was a newer version 3.5.1 which will also run on Mavericks, but is not currently available either as a retail copy or as an electronic download as Apple will only sell 3.6 now as Yosemite came out a few weeks ago. I really don't want to get Yosemite as then I won't be able to run Filemaker 11 at home for the office. And I can only upgrade Filemaker by getting a whole new set of licences for all the other computers in the office, costing about €2,000 altogether. Then I will have to buy two new Apple Mac minis costing another €1,000. And there are potential issues with other software that I will have to "up"grade to including iWork's watered down products. Wherever I look, Apple is making my life difficult.

How can I set the default line height?

Greetings,
I have a report that displays observed behavior in a list format like the one below:
Behavior Observed:
    Withdrawn
    Happy
    Sad
    angry
There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
So the output would look like this:
Behavior Observed:
    Withdrawn            (mild)
    Happy
    Sad                      (moderate)
    angry
The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field. I tried to set the details to be uniform by selecting "Arrange Lines", however when I do this, the data is displayed too close horizontally. So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
Does this make sense?
Thank you,
Kevin

I'm confused... How are you associating line height with horizontal field spacing???
If you have this...
Behavior Observed:     Severity:
Withdrawn          (mild)
Happy
Sad               (moderate)
angry
But want it to look like this...
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
all you have to do is create a concatenation formula. Something like this...
{TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
Sorry if I've misunderstood what you are trying to do.
Jason

How do I set the default print margins for ALL printers in mozilla.cfg

How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
If you can figure out how to add the printer name, this can be used to lock the margins.

How can I set the default saving setting in Acrobat 9 to Acrobat 1.4 Compatibility

How can I set the default saving in Acrobat 9 to Acrobat 1.4 Compatibility...
My imposition program requires 1.4 compatibility - it handles files from acrobat 8 perfectly - however to use from 9 i have to re-postscript and redistill.
Ive tried saving as optimised but it doesnt always work.
I cant seem to find anything in the settings to change it....
Can anyone enlighten me please??
Paul

fatdouglas wrote:
Ive tried saving as optimised but it doesnt always work.
I cant seem to find anything in the settings to change it....
Can anyone enlighten me please??
Paul
In your Optimize settings if you set it to "Make Compatible with Acrobat 5.0 or Later" it will bring it down to PDF 1.4

How do I set the default to adobe 9.3?

How do I set the default to Adobe 9.3? I have Acrobat 6.0 that tries to open. However, I want the Adobe Reader 9.3 to open. How do I make this change?

I had the exact same problem.....iinstalled on a Windows XP machine
You probably had 9.3 already installed, then you pulled out your 6.0 Acrobat Professional disk and installed that.
What you need to do is "remove" your Adobe 9.3.
Re-start your machine. Then reload Adobe ...try Adobe 8.
Now it won't use Acrobat 6.0. At this point, select an existing PDF file, RIGHT click, select "Open With...". You won't probably see Acrobat 6.0 so you have to "BROWSE" ... find Adobe, then find "6.0". Select.
At this point Adobe 8 will be your default, but, you can always select 6.0 by "right clicking" the PDF first, when you want to.

On a mac computer, how do i set the default brower to open up links in emails to Safari, and not Mozilla

On a mac computer, how do i set the default brower to open up links in emails to Safari, and not Mozilla
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; GTB6.5; .NET CLR 1.1.4322)

Thanks for the suggestion.
A few weeks ago I downloaded some free software from the "tucows.com" website, it appears to have permanently hijacked my web browsers (both firefox and IE) so all searches go to their "searchqu" site, and new tabs open at that site. I was unable to repair this with the addins you suggested or by editing my user preferences files, and ended up having to reinstall firefox. Hopefully I won't run into the tucows rootkit ;)
But thanks anyway.
-DPT

How do I set the default keystore password?

The following code is currently failing with the exception below.
private X509Certificate getX509Certificate(String alias)
               throws CertificateException {
          // NOTE The default keystore password is "**********", as specified in the Sun KeyStore documentation
          // NOTE For more information, read the Sun documentation at http://java.sun.com
          X509Certificate cert = null;
          String keystore      = "keystore";
          try {
               cert = getX509Certificate(alias, keystore, "**********");
          catch(KeyStoreException exception) {
               // A keystore exception occurred in the call to getX509Certificate, which could be indicative of a
               // bad installation
               throw new CertificateException("A keystore exception occurred accessing the default keystore."
                        + " Check your keystore installation, ensuring that the default keystore password"
                        + " is the standard Java keystore password\r\n"
                        + exception.getMessage());
          }+[04/12/07 15:02:57:827 GMT] 0000001f SystemErr R java.security.cert.CertificateException: A keystore exception occurred accessing the default keystore. Check your keystore installation, ensuring that the default keystore password is the standard Java keystore password+
A keystore exception occurred accessing the default keystore. Check your keystore installation, ensuring that the default keystore password is the standard Java keystore password
The provider 'SUN' has not been configured
no such provider: SUN
So it looks like my default keystore password is not the same as that in the code above (I've replaced it with ******). How do I set the default keystore to be the same as in the code above? Please note the exact same code works for another application - and so I would like to use the same class file rather than having to change the code above.

You define the password for a keystore when you create it.
There is no default.
There is a default on the 'cacerts' truststore provided for JSSE: see
http://java.sun.com/j2se/1.5.0/docs/guide/security/jsse/JSSERefGuide.html

When importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

when importing images in Pages, how do I set the default object placement to "stay on page" and "no text wrap"?

Then use a Layout template.
I am a designer and I use Word Processing templates with layout breaks and all the other tools available because Layout templates are just WP templates with a lot of options removed.
Pages is not Indesign, but then Indesign is not Pages, …and Pages 5 is not Pages '09.
Unless your flyers are for the Web, why are you using Pages at all?
I am curious, what does your post have to do with the O.P.'s question? …and why are you posting it here?
Peter

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

How do I set the default text in a bound textbox?

How do I set the default value of a bound textbox when the AddNewItem button on the MenuStrip is clicked?
I have the following code (see below), but for some reason it does work when I put the code in the
AddNewItem_Click event; however, it does work if I put it in the
Form's Load Event. The statement in question is Me.txtBusUsagePct.Text = 100.
What am I doing wrong? Why can't I set the default text in the AddNewItem_Click
event?
Private Sub BindingNavigatorAddNewItem_Click(sender As Object, e As EventArgs) Handles BindingNavigatorAddNewItem.Click
Me.txtBusUsagePct.Text = "100"
End Sub
BobV365

Hello,
Here I am using mocked up data but the important thing is after loading the data. Requires on the form a BindingNavigator and two text boxes.
Public Class Form1
WithEvents bsData As New BindingSource
Private Sub Form1_Load(
ByVal sender As System.Object,
ByVal e As System.EventArgs) Handles MyBase.Load
Using MockedData As New DataTable()
MockedData.Columns.AddRange(New DataColumn() _
New DataColumn("PartName", GetType(String)),
New DataColumn("partqty", GetType(Int32))
MockedData.Rows.Add(New Object() {"Part A", 100})
MockedData.Rows.Add(New Object() {"Part 99", 34})
MockedData.Rows.Add(New Object() {"Part B", 4})
bsData.DataSource = MockedData
End Using
CType(bsData.DataSource, DataTable).AcceptChanges()
BindingNavigator1.BindingSource = bsData
TextBox1.DataBindings.Add("Text", bsData, "Partname")
TextBox2.DataBindings.Add("Text", bsData, "partqty")
End Sub
Private Sub bsData_AddingNew(
ByVal sender As Object,
ByVal e As System.ComponentModel.AddingNewEventArgs) _
Handles bsData.AddingNew
Dim dv As DataView = TryCast(bsData.List, DataView)
Dim rv As DataRowView = dv.AddNew()
rv("PartName") = "(new)"
rv("partqty") = 0
e.NewObject = rv
bsData.MoveLast()
End Sub
End Class
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. Contact via my webpage under my profile
but do not reply to forum questions.

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

How do I share the iTunes library with all/some of the other users on the same iMac?

How do I share the iTunes library with all/some of the other users on the same iMac?

Check out these articles it may help...
http://support.apple.com/kb/HT3819
http://www.apple.com/itunes/how-to/#playlists-shareplaylists
hope this helps.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do I set the default folder for file - open file... ?

When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.

Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani

How do I set the default library with "Save As" ?

Similar Messages

Maybe you are looking for