How do I set the "First Play" Target?

I'm very new to DVD Studio Pro and after building a menu and adding a track when I simulate it I get the warning, +"The 'First Play' target has not been set. The simulator will start in a stopped state."+
When I burned the disc it just started the video without any menu.
Any help would be greatly appreciated.

Go to the "Graphical window" Click over the icon which you want to be "First Play" pushing "Ctrl" in your keyboard, you will get a list of options, there you have the answer.
Hugo

Similar Messages

How do I set the first day of the week as Monday in the iPad calendar?

I must be missing something - simply want Monday to show up first in week view in the iPad calendars. I've seen suggestions of changing from US to UK region settings but I don't want to change formats for numbers, etc globally.
Any ideas?
Thanks!

At the moment I don't think that it's possible apart from via the Region Format which you don't want to change. You can try leaving feedback and maybe it'll get changed in a future release of iOS : http://www.apple.com/feedback/ipad.html

First play target in DVDSP

Hi there,
I was about to preview with "simulate" of DVDSP the content of a DVD that I am preparing with that same application.
I get the following message:
The "first play" target has not been set
The simulator will start in a stopped state
My choice is to click "OK" and have the simulator quits, or to click "cancel"
Could someone please explain what I should do or what I did wrong ?
I haven't found an answer in the DVDSP help
Thanks in advance
Ivan

Hi Gary
When I do so - right click on the tracks in viewer, it is indeed starting the simulator, but if later on, I try again, directly from the Simulate tab, it is not reading and I get the same error message again....
Is it because I did something wrong when I created the DVD project ?
Many thanks
Ivan

How do I set the number of Plays?

01Jul2011
I need to change the number of plays of some mp3 files in itunes. How do I change files that were played, but not counted as plays to played?
I have audio lectures, in order in a playlist that I don't want to hear again. My playlist is set only to list unplayed (plays <1) audio files. Sometimes the ipod I use to listen to the files locks up and does count the completed files as played (Plays = 1). How can I set the Plays from 0 to 1?
Thank you for your help with this.
Regards,
chhenden

Start the file playing in iTunes then click on the right end of the play progress bar. Playback will end. The play count will increment and the next track will begin to play.

How do I set the wallpaper for the the first page only

how do I set the wallpaper for the the first page only.I have my ICE #'s as wallpaper but I only want it on the first page

When you set a wallaper you are asked where you want to set it. Either Lock Screen or Home Screen or Both.
If you choose Lock screen it will only appear when you wake up your phone.
If you set it to Home screen, then it wil be set behind the app icons on all your home screens.
If you choose both, then it will be on both.
Not sure what you mean by the " have a photo of my ICE in contacts that I am trying to use????"
The Photo should be in the Photos App. how is it in contacts? is it assigned to a contact?

How to set the first row as selected in single selection of table

when the page renders how do we make the first row as selected for single selection in a table.
Thansk a lot for your help

set the selection Attribute's value to 'Y' for the first row. Thats enough.
eg;
Row row=vo.first();
row.setAttribute("SelectionAttribute", "Y");
--Prasanna

HT5295 How can I stop the auto play feature automatically playing/streaming the next podcast?

How can I stop the auto play feature automatically playing/streaming the next podcast?

Hi there.
I listened to podcast there were two things I found that helped me out. Both we're in the podcast app itself.
Firstly change the default sorting order. When looking at the list off episodes a available on your ios device tap on the description part at the top, this will bring up the settings for that podcast (subscribe mark as played etc) scroll to the Bottom and select oldest first. This will mean that if you are listening to the latest download it will stop at the end as there will be no more to play.
Secondly, and useful if listening to older podcasts in the list, you can use the timer to stop once the current episode has ended. To do this when you are in the podcast playback screen slide the "album artwork" up, revealing the playback options and nifty tape playing animation this is where you adjust playback speed and set a timer. The timer has a number of options to set playback to stop after set amount of time. However one of these options is to stop once the current episode you are listening to ends. This can also be current chapter if the podcast you are listening to supports chapters.
Hope this helps, if not clear let me know

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

How do I set the audience when I'm using Siri on my iPhone 5 to post to Facebook

How do I set the audience privacy for when I’m using Siri on my iPhone 5 to post to Facebook?
When I ask Siri to post a message to my Facebook Siri tells me what I have said and then asks tot post it, I then checked on my computer and the post is visible to "ME ONLY" I can change this on the computer and on my phone via the App but I do not want to be doing that all the time.
If I post to Facebook via Siri on my iPhone 5 I want it at the default setting of friends only.
So How do I change this?
I posted the first one 2 minutes ago then went into Facebook via the App and changed it but did a second one hoping that the default privacy had changed but it was again to me only. As you can see via the padlock. Please help. Thanks

What if you do need help or emergency situation while Posting FB via Siri is the fastest way to show you or someone is in danger, and he/she is dying because the post is Only visible to Me !?!?!?!???
Anyone who uses FaceBook to get immediate help for life threatening emergency is mercifully removing themselves from the gene pool.

How do I set the frame size

I am Making a program for purchasing games, with the basic layout alsot done, except on problem. When the purchase button is pressed, a dialog shows up but nothing is seen until i resize it. How would i set the frame size so that i do not need to resize it each time? below is the code for the files. Many thanks in advance.
CreditDialog
import java.awt.*;
import java.awt.event.*;
class CreditDialog extends Dialog implements ActionListener { // Begin Class
     private Label creditLabel = new Label("Message space here",Label.RIGHT);
     private String creditMessage;
     private TextField remove = new TextField(20);
     private Button okButton = new Button("OK");
     public CreditDialog(Frame frameIn, String message) { // Begin Public
          super(frameIn); // call the constructor of dialog
          creditLabel.setText(message);
          add("North",creditLabel);
          add("Center",remove);
          add("South",okButton);
          okButton.addActionListener(this);
          setLocation(150,150); // set the location of the dialog box
          setVisible(true); // make the dialog box visible
     } // End Public
     public void actionPerformed(ActionEvent e) { // Begin actionPerformed
//          dispose(); // close dialog box
     } // End actionPerformed
} // End Class
MobileGame
import java.awt.*;
import java.awt.event.*;
class MobileGame extends Panel implements ActionListener { // Begin Class
     The Buttons, Labels, TextFields, TextArea
     and Panels will be created first.
     private int noOfGames;
//     private GameList list;
     private Panel topPanel = new Panel();
     private Panel middlePanel = new Panel();
     private Panel bottomPanel = new Panel();
     private Label saleLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea saleArea = new TextArea(7, 25);
     private Button addButton = new Button("Add to Basket");
     private TextField add = new TextField(3);
     private Label currentLabel = new Label ("Java Games For Sale",Label.RIGHT);
     private TextArea currentArea = new TextArea(3, 25);
     private Button removeButton = new Button("Remove from Basket");
     private TextField remove = new TextField(3);
     private Button purchaseButton = new Button("Purchase");
     private ObjectList gameList = new ObjectList(20);
     Frame parentFrame; //needed to associate with dialog
     All the above will be added to the interface
     so that they are visible to the user.
     public MobileGame (Frame frameIn) { // Begin Constructor
          parentFrame = frameIn;
          topPanel.add(saleLabel);
          topPanel.add(saleArea);
          topPanel.add(addButton);
          topPanel.add(add);
          middlePanel.add(currentLabel);
          middlePanel.add(currentArea);
          bottomPanel.add(removeButton);
          bottomPanel.add(remove);
          bottomPanel.add(purchaseButton);
          this.add("North", topPanel);
          this.add("Center", middlePanel);
          this.add("South", bottomPanel);
          addButton.addActionListener(this);
          removeButton.addActionListener(this);
          purchaseButton.addActionListener(this);
          The following line of code below is
          needed inorder for the games to be
          loaded into the SaleArea
     } // End Constructor
     All the operations which will be performed are
     going to be written below. This includes the
     Add, Remove and Purchase.
     public void actionPerformed (ActionEvent e) { // Begin actionPerformed
     If the Add to Basket Button is pressed, a
     suitable message will appear to say if the game
     was successfully added or not. If not, an
     ErrorDialog box will appear stateing the error.
          if(e.getSource() == addButton) { // Begin Add to Basket
//          GameFileHandler.readRecords(list);
               try { // Begin Try
                    String gameEntered = add.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 0
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Add to Basket
     If the Remove From Basket Button is pressed, a
     a suitable message will appear to say if the
     removal was successful or not. If not, an
     ErrorDialog box will appear stateing the error.
     if(e.getSource() == removeButton) { // Begin Remove from Basket
          try { // Begin Try
                    String gameEntered = remove.getText();
                    if (gameEntered.length() == 0 ) {
                         new ErrorDialog (parentFrame,"Feild Blank");
                    } else if (Integer.parseInt(gameEntered)< 1
                              || Integer.parseInt(gameEntered)>noOfGames) { // Begin Else If
                         new ErrorDialog (parentFrame,"Invalid Game Number");
                    } else { // Begin Else If
                         //ADD GAME CODE
                    } // End Else
               } catch (NumberFormatException num) { // Begin Catch
                    new ErrorDialog(parentFrame,"Please enter an Integer only");
               } // End Catch
          } // End Remove from Basket
     If the purchase button is pressed, the
     following is executed. NOTE: nothing is done
     when the ok button is pressed, the window
     just closes.
          if(e.getSource() == purchaseButton) { // Begin Purchase
               String gameEntered = currentArea.getText();
               if (gameEntered.length() == 0 ) {
                    new ErrorDialog (parentFrame,"Nothing to Purchase");
               } else { // Begin Else If
                    new CreditDialog(parentFrame,"Cost � 00.00. Please enter Credit Card Number");
               } // End Else
          } // End Purchase
     } // End actionPerformed
} // End Class
RunMobileGame
import java.awt.*;
public class RunMobileGame { // Begin Class
     public static void main (String[] args) { // Begin Main
          EasyFrame frame = new EasyFrame();
          frame.setTitle("Game Purchase for 3G Mobile Phone");
          MobileGame purchase = new MobileGame(frame); //need frame for dialog
          frame.setSize(500,300); // sets frame size
          frame.setBackground(Color.lightGray); // sets frame colour
          frame.add(purchase); // adds frame
          frame.setVisible(true); // makes the frame visible
     } // End Main
} // End Class
EasyFrame
import java.awt.*;
import java.awt.event.*;
public class EasyFrame extends Frame implements WindowListener {
public EasyFrame()
addWindowListener(this);
public EasyFrame(String msg)
super(msg);
addWindowListener(this);
public void windowClosing(WindowEvent e)
dispose();
public void windowDeactivated(WindowEvent e)
public void windowActivated(WindowEvent e)
public void windowDeiconified(WindowEvent e)
public void windowIconified(WindowEvent e)
public void windowClosed(WindowEvent e)
System.exit(0);
public void windowOpened(WindowEvent e)
} // end EasyFrame class
ObjectList
class ObjectList
private Object[] object ;
private int total ;
public ObjectList(int sizeIn)
object = new Object[sizeIn];
total = 0;
public boolean add(Object objectIn)
if(!isFull())
object[total] = objectIn;
total++;
return true;
else
return false;
public boolean isEmpty()
if(total==0)
return true;
else
return false;
public boolean isFull()
if(total==object.length)
return true;
else
return false;
public Object getObject(int i)
return object[i-1];
public int getTotal()
return total;
public boolean remove(int numberIn)
// check that a valid index has been supplied
if(numberIn >= 1 && numberIn <= total)
{   // overwrite object by shifting following objects along
for(int i = numberIn-1; i <= total-2; i++)
object[i] = object[i+1];
total--; // Decrement total number of objects
return true;
else // remove was unsuccessful
return false;
ErrorDialog
import java.awt.*;
import java.awt.event.*;
class ErrorDialog extends Dialog implements ActionListener {
private Label errorLabel = new Label("Message space here",Label.CENTER);
private String errorMessage;
private Button okButton = new Button("OK");
public ErrorDialog(Frame frameIn, String message) {
/* call the constructor of Dialog with the associated
frame as a parameter */
super(frameIn);
// add the components to the Dialog
          errorLabel.setText(message);
          add("North",errorLabel);
add("South",okButton);
// add the ActionListener
okButton.addActionListener(this);
/* set the location of the dialogue window, relative to the top
left-hand corner of the frame */
setLocation(100,100);
// use the pack method to automatically size the dialogue window
pack();
// make the dialogue visible
setVisible(true);
/* the actionPerformed method determines what happens
when the okButton is pressed */
public void actionPerformed(ActionEvent e) {
dispose(); // no other possible action!
} // end class
I Know there are alot of files. Any help will be much appreciated. Once again, Many thanks in advance

setSize (600, 200);orpack ();Kind regards,
  Levi
PS:
    int i;
parses to
int i;
, but
[code]    int i;[code[i]]
parses to
    int i;

How do I set the placementID of portlet at runtime?

Hi,
I want to know the position of portlets on the page.
Below is my requirement,
I have 2 column layout on my page and each column has 3 different portlets. So when the first time it loads page load the page user see some portlets on each column, when user revisit that page I have to change the position of portlets in short I can say I have to shuffle the portlets at run time.
Approach which I have decided and in which I require more help is like,
Whenever user visit the page Backing file which run and it is store positions of portlets I am able to get position of portlet using following code,
portletbc = deskbc.getPortletBackingContextRecursive("PORTLET_INSTANCE");
String placeID = portletbc.getPlacementId();
This I store in DB so whenever user revisit or refresh the page from the backing file I read the DB and if placementID of the portlet is same then I shuffle placementID. So here comes the problem or I require help...
How do I set the placementID as I am not able to find out way to do it. So, can you please let me know how to set portlets placementID.
Thanks in advance.
HJ

Check out the movePortlet method on PortalCustomizationManager:
[http://download.oracle.com/docs/cd/E13155_01/wlp/docs103/javadoc/com/bea/netuix/application/manager/persistence/PortalCustomizationManager.html]

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

How do I set the default size of a new folder?

I have finder sized the way I want for existing folders and if I do Finder > New Finder Window. These preferrences, however, do not seem to apply to new folders. Everytime I create a new folder on my desktop, and open that folder for the first time, the window size is really small and the sidebar is narrow. This is incredibally annoying. How do I set the default size for all new folders? Is there a plist file I can edit to fix this? Or an AppleScript I can run automatically in the background that fixes this? I am running Mavericks 10.9.1.

If you use the Finder's New Finder Window command (command N) to create a new window, resize it, place it where you want, and set it for icon view or however you want it. Then close it. Closing it is what sets these as the default. That should become the default for every new Finder window you create using the new window command. But if you have lots of windows open at once and then close them, the last window you close will set a new default.
There are lots of utilities that control Windows - their size and placement. I use one called Moom but there are many more.

¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

¿How do I set the calendar to start week on Monday and not Sunday in my iphone?

The jewish calendar does not have names for the days of the week. The week ends with the holy Sabbath (Saturday) and therefore the Sunday is the first days after Sabbath (Yom Rishon), the Monday the second day after Sabbath (Yom Sheini), etc.
The Christians believe that Christ was raised on the first days of the week (Mathew 28:1, et al) AFTER the Sabbath was over. So their holy day is the Sunday and the working week starts on a Monday.
The business days in the western world are numbered starting with the Monday as day number 1 (Timetables of Airlines, Calendars, even Microsoft Windows...).
Unfortunately in the United States religious freedom extends to a level which is not understood easily by the rest of the world. Since the MAC OS X allows to change the first day from a Sunday to a Monday, one might wonder why Apple decided to give the iPhone a jewish touch.
It could be supposed that this is the way of the least resistance. Only few complain about this issue, but if it were the other way around a lot of people would complain...
PS: I agree with the others here: It is very, very annoying and more than once I entered an appointment into the wrong day...;-)

In EIC, how can we set the SLA of a subcategory to none SLA-related.

Hi Experts,
This is our current setup in EIC...
Category 0501 has an SLA of 8 hours. Subcategory 050101 has to be none SLA relevant. But if we put zero or blank to the SLA Target Value field, it will automatically have a due date defaulted to today. If we will not indicate 050101 on the configuration, it will have the 0501 SLA of 8 hours.
How can we set the 050101 SLA off?
The path: IMG --> Personnel Management --> Employee Interaction Center (EIC) --> Interaction Center Web-Client --> Application Functions --> Activity --> Service Level Agreement (SLA) --> Define SLV Properties
Thanks in advance.

Hi Harish and Jarret.
@Harish, I already tried unchecking the checkbox of the Display field but the problem with this is, it will also apply for the rest of the categories. It should only be for this specific subcategory.
@Jarret, apology, but can you explain to me further about your instruction/advise? I get the feeling that we're on to something with your advise but I didn't quite get it on how to exactly.
1. You should build the SLA from the lowest level up...
-I'm not really sure how, actually.
2. If you have 8 subcats... will put the 8 entries in the table...
-where do I put the 1 subcat? This is because if I don't put that "No SLA" subcat in the table, the due date of that specific subcat will automatically appear todayu2019s date.
Thanks for both of you. I really appreciate your help.

How do I set the "First Play" Target?

Similar Messages

Maybe you are looking for