How do I set the image size in PS touch to print to my Epson printer w ithout losing any of the picture. PS Touch appears to be showing pixels and not inches, how can I covert it toshow inches?

I am using PS Touch from my tablet . I am importinga photo from an SD card . When all editing is completed I then send it wireless from the tablet via Epson I print to the printer. It all works great except that part of the photo at each end is cut off and does not print. I am printing on 8.5 x11 paper.
How do I convert the image size in PSTouch frm pixels to inches?

Epson's iPrint has always been an oddball. It will always "zoom in" on an image to print even if you have the proper dimensions and resolution set for actual print size. I think other users have reported this, at least on Android.
You can't have PS Touch show inches instead of pixels at this time but you can use an online website to find out what you need to fit within a particular resolution. (Google "pixels to inches calculator".)

Similar Messages

How to get Yahoo Mail to allow pictures/graphics to appear within a received email and not just as an attachment?

When I receive emails that contain graphics and pictures within the body of the email they will be displayed only as attachments that have to be 'downloaded' and opened separately. I contacted Yahoo Mail and they said that it must be caused by my browser(Firefox). I have now difficulty with the graphic when I use Explorer. What setting, if any, do I have to change in Firefox to correct this?

Your signature says you have the latest operating system, Mavericks (10.9) but you've asked your question in the forum for Snow Leopard (10.6) which is a much older and somewhat different system. You are much more likely to get an answer in the forum applicable to your system, so I've asked the Hosts to move your question there (it may be a few hours before this happens). I put the note there so no-one else who looks at this need bother to make the request.

How can I fix the image size in a "Picture Library Slideshow Web Part"

When I upload images to be used in the Slideshow Web Part they become skewed because they are different sizes. Is there a way to fix this besides uploading images that are all the same size?
Thanks,
Kathleen

http://webcache.googleusercontent.com/search?q=cache:bfUcFkD_bxgJ:spcodes.blogspot.com/2012/08/display-slide-show-images-within-fixed.html+&cd=4&hl=en&ct=clnk&gl=in
Display Slide Show Images within fixed size
The Picture Library Slide Show Web Part show the images stored in a picture library with slide show effect.
This slide show web part displays the images with it's original size. Due to this the web part changes its size according to the image size. If we want the slide show to run within the specific size on the page then we need to control the size of the images
to the fixed length during runtime.
To achieve this we need to add the CEWP above the picture Library Slide Show web part & insert the following script in that web part.
<style type="text/css">
.ms-WPBody TD {
 PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: auto !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
.ms-WPBody TD DIV {
 PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 100% !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
.ms-WPBody TD IMG {
 PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 260px !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
190px !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px; align: center
.s4-wpcell-plain {
 PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 100% !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
.ms-PartSpacingVertical {
 MARGIN-"color:#783f04;font-family:'Courier New',Courier,monospace;" />}
.style1 {
 COLOR: #808080
}</style>
We can fix the height & width of the image in the .ms-WPBody TD IMG css.
http://sharepoint.stackexchange.com/questions/66028/picture-slideshow-web-part-image-size-too-small
How to display original images in SlideShow web part
Step 1. Save below JavaScript code to file, for example in SlideshowObjectInitializer.txt and upload it to SiteAssets Library
<script type="text/javascript">
function SlideshowObjectInitializer() {
ShowPic = (function(ShowPicOrig) {
return function() {
var ssObj = arguments[0]; //SlideShow object
var curPicIdx=ssObj.index; //current picture index
ShowPicOrig.apply(this, arguments); //call original ShowPic
//apply some changes to display original picture in SlideShow control
ssObj.image.src = ssObj.linkArray[curPicIdx]; //display original image instead of web image
//change picture & container size to auto instead of fixed (by default web image size is used)
ssObj.image.setAttribute('height','100%');
ssObj.image.setAttribute('width','100%');
var cell = ssObj.cell;
cell.style.width = 'auto';
cell.style.height = 'auto';
cell.style.display = '';
var pcell = ssObj.cell.parentNode;
pcell.style.width = 'auto';
pcell.style.height = 'auto';
})(ShowPic);
ExecuteOrDelayUntilScriptLoaded(SlideshowObjectInitializer, 'imglib.js');
</script>
Step 2. Add CEWP on page where Slideshow web part is located and in the Content Editor tool pane, under Content Link, type
/SiteAssets/SlideshowObjectInitializer.txt.
If this helped you resolve your issue, please mark it Answered

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

How can I control the image size when I export form iphoto, the choice is too limited, I need to send a photo under 3 MB but if I choose high quaulity it is only 1.1 and i need to keep the best quaulity I can. Thanks for help.

Any image can only be as large as the Original. With a program like Photoshop you can UpRes an image and get it to a bigger size, larger files size as well, but the actual quality of the image will be degraded, depending on the UpRes system and the original quality of the image.
iPhoto is not the program to be doing that in and I don't think it even has that option.
So I suspect the image you are trying to send isn't much bigger than what you are getting. You can also try Exporting it from iPhoto to yopur desktop and see what size you end up with. If it is still that 209KB +/- file size then that is the size of the original image.

In A2500, how to change the Image Size?

I have an A2500 camera. The images are great, but they're huge (1.5mb each) and fill up my memory card way too quickly. How can I use the camera's menu settings so images are stored in a smaller size?

Hi TravelMark!
Thanks for posting!
To change the image size, please press the <FUNC/SET> button. select the [L], then change that to [M1] or [M2].
This didn't answer your question or issue? Find more help at Contact Us.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

How to know the image size and coding of our j2me project

Hi,
I have developed a game and i did the obfuscation. My jar size is now 170KB. How can differentiate the coding size and the image size from the total jar size.
If i asked any thing wrongly, please forgive me and clarify my doubt.
I am looking forward to meet ur queries if any.
Thanks and Regards,
Hithayath.

<?xml version="1.0" encoding="UTF-8"?>

<project xmlns:projdeps2="http://www.netbeans.org/ns/ant-project-references/2" basedir=".." default="jar" name="-impl">
<target name="pre-init"/>
<target depends="pre-init" name="pre-load-properties">
<property file="nbproject/private/private.properties"/>
<property value="0.0.1" name="deployment.number"/>
<property value="000002" name="deployment.counter"/>
<property location="${netbeans.user}/build.properties" name="user.properties.file"/>
<available file="${user.properties.file}" property="user.properties.file.exists"/>
</target>
<target unless="config.active" depends="pre-load-properties" name="exists.config.active">
<echo message="Active configuration (config.active property) is not set - using default." level="warning"/>
<property name="config.active" value=""/>
</target>
<target unless="netbeans.user" depends="pre-load-properties" name="exists.netbeans.user">
<echo message="NetBeans IDE user directory (netbeans.user property) is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: ant-ext library home, ...). You could also open this project in the NetBeans IDE - in this case this property would be set automatically." level="warning"/>
</target>
<target unless="user.properties.file.exists" depends="pre-load-properties" name="exists.user.properties.file">
<echo message="User properties file (user.properties.file) property is not set. By specifying this property many properties required by the project will be automatically evaluated (e.g.: libraries, platforms, ...)." level="warning"/>
</target>
<target depends="pre-load-properties,exists.config.active,exists.netbeans.user,exists.user.properties.file" name="load-properties">
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
<containsregex pattern="^platform.active=|^deployment.method="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="${user.properties.file}">
<filterchain>
<replaceregex replace="platform." pattern="^platforms\.${platform.active}\."/>
<replaceregex replace="deployment.scriptfile=" pattern="^deployment\.${deployment.method}\.scriptfile="/>
</filterchain>
</loadproperties>
<loadproperties srcfile="nbproject/project.properties">
<filterchain>
<containsregex replace="\1" pattern="^configs\.${config.active}\.(.*)"/>
<concatfilter prepend="nbproject/project.properties"/>
</filterchain>
</loadproperties>
</target>
<target unless="platform.active" depends="load-properties" name="exists.platform.active">
<echo message="Active platform (platform.active property) in not set. If you set this and user.properties.file property, many properties required by the project will be automatically evaluated (e.g.: platform home, platform classpath, ...)." level="warning"/>
</target>
<target depends="load-properties" unless="platform.configuration" name="exists.platform.configuration">
<echo message="Platform configuration (platform.configuration) is not set. Using default (CLDC-1.0) configuration." level="warning"/>
<property value="CLDC-1.0" name="platform.configuration"/>
</target>
<target depends="load-properties" unless="platform.profile" name="exists.platform.profile">
<echo message="Platform profile (platform.profile) is not set. Using default (MIDP-1.0) profile." level="warning"/>
<property value="MIDP-1.0" name="platform.profile"/>
</target>
<target depends="pre-init,load-properties,exists.platform.active,exists.platform.configuration,exists.platform.profile" name="init">
<fail unless="libs.j2me_ant_ext.classpath">Classpath to J2ME Ant extension library (libs.j2me_ant_ext.classpath property) is not set. For example: location of mobility/modules/org-netbeans-modules-kjava-antext.jar file in the IDE installation directory.</fail>
<fail unless="platform.home">Platform home (platform.home property) is not set. Value of this property should be ${platform.active.description} emulator home directory location.</fail>
<fail unless="platform.bootclasspath">Platform boot classpath (platform.bootclasspath property) is not set. Value of this property should be ${platform.active.description} emulator boot classpath containing all J2ME classes provided by emulator.</fail>
<fail unless="src.dir">Must set src.dir</fail>
<fail unless="build.dir">Must set build.dir</fail>
<fail unless="build.classes.dir">Must set build.classes.dir</fail>
<fail unless="preprocessed.dir">Must set preprocessed.dir</fail>
<fail unless="preverify.classes.dir">Must set preverify.classes.dir</fail>
<fail unless="obfuscated.classes.dir">Must set obfuscated.classes.dir</fail>
<fail unless="dist.dir">Must set dist.dir</fail>
<fail unless="dist.jar">Must set dist.jar</fail>
<fail unless="dist.jad">Must set dist.jad</fail>
<fail unless="obfuscator.srcjar">Must set obfuscator.srcjar</fail>
<fail unless="obfuscator.destjar">Must set obfuscator.destjar</fail>
<fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
<property value="" name="abilities"/>
<property value="" name="obfuscator.classpath"/>
<property value="" name="kjava.configuration"/>
<property value="UEI-1.0" name="platform.type"/>
<property value="" name="platform.device"/>
<property value="0" name="obfuscation.level"/>
<property value="false" name="sign.enabled"/>
<property value="file://" name="dist.jad.url"/>
<property value="1.3" name="javac.source"/>
<property value="1.1" name="javac.target"/>
<property value="${file.encoding}" name="javac.encoding"/>
<condition property="no.deps">
<istrue value="${no.dependencies}"/>
</condition>
<condition property="no.javadoc.preview">
<isfalse value="${javadoc.preview}"/>
</condition>
<condition value="${filter.excludes},**/*Test.java,**/test,**/test/**" property="filter.excludes.evaluated">
<istrue value="${filter.exclude.tests}"/>
</condition>
<property value="${filter.excludes}" name="filter.excludes.evaluated"/>
<condition value="" property="evaluated.run.security.domain">
<isfalse value="${run.use.security.domain}"/>
</condition>
<condition value="" property="deployment.do.override.jarurl">
<istrue value="${deployment.override.jarurl}"/>
</condition>
<property value="${run.security.domain}" name="evaluated.run.security.domain"/>
<taskdef resource="org/netbeans/modules/kjava/antext/defs.properties">
<classpath>
<pathelement path="${libs.j2me_ant_ext.classpath}"/>
</classpath>
</taskdef>
<uptodate targetfile="${preprocessed.dir}/.timestamp" property="no.clean.before.build">
<srcfiles dir="nbproject">
<include name="project.properties"/>
<include name="build-impl.xml"/>
</srcfiles>
</uptodate>
<condition property="skip.deployment">
<equals trim="true" casesensitive="false" arg2="NONE" arg1="${deployment.method}"/>
</condition>
<condition property="skip-sign-keystore-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.keystore.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore.password}"/>
</not>
</and>
</or>
</condition>
<condition property="skip-sign-alias-password-input">
<or>
<isfalse value="${sign.enabled}"/>
<and>
<isset property="sign.keystore"/>
<isset property="sign.alias"/>
<isset property="sign.alias.password"/>
<not>
<equals trim="true" arg2="" arg1="${sign.keystore}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias}"/>
</not>
<not>
<equals trim="true" arg2="" arg1="${sign.alias.password}"/>
</not>
</and>
</or>
</condition>
<antcall inheritrefs="true" inheritall="true" target="post-init"/>
</target>
<target name="post-init"/>
<target name="deps-jar" depends="init" unless="no.deps"/>
<target description="Clean project in case its meta information has changed." unless="no.clean.before.build" depends="init" name="conditional-clean">
<antcall target="do-clean" inheritall="true" inheritrefs="true"/>
</target>
<target name="pre-preprocess"/>
<target description="Preprocess project sources." depends="init,pre-preprocess,deps-jar,conditional-clean" name="preprocess">
<mkdir dir="${preprocessed.dir}"/>
<echo file="${preprocessed.dir}/.timestamp" message="ignore me"/>
<nb-prep encoding="${javac.encoding}" preprocessfor="${config.active},${abilities}" destdir="${preprocessed.dir}">
<fileset excludes="${filter.excludes.evaluated}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</nb-prep>
<antcall inheritrefs="true" inheritall="true" target="post-preprocess"/>
</target>
<target name="post-preprocess"/>
<target description="Extracts all bundled libraries." depends="init,deps-jar,conditional-clean" name="extract-libs">
<mkdir dir="${build.classes.dir}"/>
<nb-extract excludeManifest="true" dir="${build.classes.dir}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</nb-extract>
</target>
<target name="pre-compile"/>
<target description="Compile project classes." depends="init,preprocess,extract-libs,pre-compile" name="compile">
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" bootclasspath="${platform.bootclasspath}" srcdir="${preprocessed.dir}" destdir="${build.classes.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<copy todir="${build.classes.dir}">
<fileset excludes="${filter.excludes.evaluated},${build.classes.excludes}" defaultexcludes="${filter.use.standard}" dir="${src.dir}"/>
</copy>
<antcall inheritrefs="true" inheritall="true" target="post-compile"/>
</target>
<target name="post-compile"/>
<target name="pre-compile-single"/>
<target description="Compile selected project classes." depends="init,preprocess,extract-libs,pre-compile-single" name="compile-single">
<fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
<mkdir dir="${build.classes.dir}"/>
<javac encoding="${javac.encoding}" includes="${javac.includes}" bootclasspath="${platform.bootclasspath}" destdir="${build.classes.dir}" srcdir="${preprocessed.dir}" debug="${javac.debug}" optimize="${javac.optimize}" deprecation="${javac.deprecation}" target="${javac.target}" source="${javac.source}" includeantruntime="false">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
</javac>
<antcall inheritrefs="true" inheritall="true" target="post-compile-single"/>
</target>
<target name="post-compile-single"/>
<target depends="init" name="create-jad">
<mkdir dir="${build.dir}"/>
<dirname property="dist.jad.dir" file="${dist.dir}/${dist.jad}"/>
<mkdir dir="${dist.jad.dir}"/>
<condition value="${manifest.apipermissions}" property="evaluated.manifest.apipermissions">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition value="${manifest.pushregistry}" property="evaluated.manifest.pushregistry">
<not>
<equals arg2="MIDP-1.0" arg1="${platform.profile}"/>
</not>
</condition>
<condition property="contains.manifest.configuration">
<contains string="${manifest.others}" substring="MicroEdition-Configuration: "/>
</condition>
<condition property="contains.manifest.profile">
<contains string="${manifest.others}" substring="MicroEdition-Profile: "/>
</condition>
<property name="evaluated.manifest.apipermissions" value=""/>
<property name="evaluated.manifest.pushregistry" value=""/>
<property value="" name="manifest.jad"/>
<property value="" name="manifest.manifest"/>
<echo file="${dist.dir}/${dist.jad}">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.jad}</echo>
<echo file="${build.dir}/manifest.mf">${manifest.midlets}${evaluated.manifest.apipermissions}${evaluated.manifest.pushregistry}${manifest.others}${manifest.manifest}</echo>
<antcall inheritrefs="true" inheritall="true" target="add-configuration"/>
<antcall inheritrefs="true" inheritall="true" target="add-profile"/>
</target>
<target unless="contains.manifest.configuration" name="add-configuration">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Configuration: ${platform.configuration}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Configuration: ${platform.configuration}
</echo>
</target>
<target unless="contains.manifest.profile" name="add-profile">
<echo append="true" file="${dist.dir}/${dist.jad}">MicroEdition-Profile: ${platform.profile}
</echo>
<echo append="true" file="${build.dir}/manifest.mf">MicroEdition-Profile: ${platform.profile}
</echo>
</target>
<target name="pre-obfuscate"/>
<target description="Up-to-date check before obfuscation." depends="init,compile" name="obfuscate-check">
<uptodate targetfile="${obfuscator.destjar}" property="no.obfusc">
<srcfiles dir="${build.classes.dir}"/>
</uptodate>
</target>
<target unless="no.obfusc" description="Obfuscate project classes." depends="init,compile,obfuscate-check,pre-obfuscate" name="obfuscate">
<dirname property="obfuscator.srcjar.dir" file="${obfuscator.srcjar}"/>
<dirname property="obfuscator.destjar.dir" file="${obfuscator.destjar}"/>
<mkdir dir="${obfuscator.srcjar.dir}"/>
<mkdir dir="${obfuscator.destjar.dir}"/>
<jar basedir="${build.classes.dir}" jarfile="${obfuscator.srcjar}"/>
<property value="" name="obfuscation.custom"/>
<nb-obfuscate extraScript="${obfuscation.custom}" obfuscationLevel="${obfuscation.level}" classpath="${platform.bootclasspath}" obfuscatorclasspath="${obfuscator.classpath}" destjar="${obfuscator.destjar}" srcjar="${obfuscator.srcjar}"/>
<mkdir dir="${obfuscated.classes.dir}"/>
<unjar dest="${obfuscated.classes.dir}" src="${obfuscator.destjar}"/>
<antcall inheritrefs="true" inheritall="true" target="post-obfuscate"/>
</target>
<target name="post-obfuscate"/>
<target name="pre-preverify"/>
<target description="Preverify project classes." depends="init,compile,obfuscate,pre-preverify" name="preverify">
<mkdir dir="${preverify.classes.dir}"/>
<nb-preverify commandline="${platform.preverifycommandline}" platformtype="${platform.type}" platformhome="${platform.home}" configuration="${platform.configuration}" classpath="${platform.bootclasspath}" destdir="${preverify.classes.dir}" srcdir="${obfuscated.classes.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-preverify"/>
</target>
<target name="post-preverify"/>
<target unless="skip-sign-keystore-password-input" if="netbeans.home" depends="init" name="set-keystore-password">
<nb-enter-password passwordproperty="sign.keystore.password" keystore="${sign.keystore}"/>
</target>
<target unless="skip-sign-alias-password-input" if="netbeans.home" depends="init" name="set-alias-password">
<nb-enter-password passwordproperty="sign.alias.password" keyalias="${sign.alias}" keystore="${sign.keystore}"/>
</target>
<target name="pre-jar"/>
<target description="Build jar and application descriptor." depends="init,preverify,create-jad,set-keystore-password,set-alias-password,pre-jar" name="jar">
<dirname property="dist.jar.dir" file="${dist.dir}/${dist.jar}"/>
<mkdir dir="${dist.jar.dir}"/>
<jar manifest="${build.dir}/manifest.mf" jarfile="${dist.dir}/${dist.jar}" compress="${jar.compress}">
<fileset dir="${preverify.classes.dir}"/>
<fileset dir="${obfuscated.classes.dir}">
<exclude name="**/*.class"/>
</fileset>
</jar>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${dist.jar}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
<antcall inheritrefs="true" inheritall="true" target="post-jar"/>
</target>
<target name="post-jar"/>
<target description="Rebuild the application." depends="init,clean,jar" name="rebuild"/>
<target description="Run MIDlet suite." depends="init,jar" name="run">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target description="Quick Run already built MIDlet suite." depends="init" name="run-no-build">
<nb-run commandline="${platform.runcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" platformtype="${platform.type}" platformhome="${platform.home}" device="${platform.device}" jadurl="${dist.jad.url}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target depends="init,clean,jar" description="Debug project." name="debug">
<delete file="${preprocessed.dir}/.timestamp"/>
<parallel>
<nb-run commandline="${platform.debugcommandline}" securitydomain="${evaluated.run.security.domain}" execmethod="${run.method}" jadfile="${dist.dir}/${dist.jad}" device="${platform.device}" platformhome="${platform.home}" platformtype="${platform.type}" debuggeraddressproperty="jpda.port" debugserver="true" debugsuspend="true" debug="true"/>
<sequential>
<sleep seconds="5"/>
<antcall target="nbdebug"/>
</sequential>
</parallel>
</target>
<target if="netbeans.home" description="Start NetBeans debugger" name="nbdebug">
<nb-kjava-debug period="2000" timeout="30000" name="${app.codename}" address="${jpda.port}">
<bootclasspath>
<path path="${platform.bootclasspath}"/>
</bootclasspath>
<classpath>
<path path="${dist.dir}/${dist.jar}"/>
</classpath>
<sourcepath>
<path path="${src.dir}"/>
<path path="${libs.src.path}"/>
</sourcepath>
</nb-kjava-debug>
</target>
<target depends="init,preprocess" name="javadoc">
<mkdir dir="${dist.javadoc.dir}"/>
<javadoc private="${javadoc.private}" windowtitle="${javadoc.windowtitle}" version="${javadoc.version}" author="${javadoc.author}" splitindex="${javadoc.splitindex}" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" use="${javadoc.use}" notree="${javadoc.notree}" bootclasspath="${platform.bootclasspath}" destdir="${dist.javadoc.dir}" source="${javac.source}">
<classpath>
<path path="${libs.classpath}"/>
</classpath>
<sourcepath>
<pathelement location="${preprocessed.dir}"/>
</sourcepath>
<fileset dir="${preprocessed.dir}"/>
</javadoc>
<antcall target="browse-javadoc"/>
</target>
<target unless="no.javadoc.preview" if="netbeans.home" name="browse-javadoc">
<nbbrowse file="${dist.javadoc.dir}/index.html"/>
</target>
<target name="pre-clean"/>
<target description="Clean build products." if="no.clean.before.build" depends="init,conditional-clean" name="clean">
<antcall inheritrefs="true" inheritall="true" target="do-clean"/>
</target>
<target depends="pre-clean" name="do-clean">
<delete dir="${preprocessed.dir}"/>
<delete dir="${build.classes.dir}"/>
<delete file="${obfuscator.srcjar}"/>
<delete file="${obfuscator.destjar}"/>
<delete dir="${obfuscated.classes.dir}"/>
<delete dir="${preverify.classes.dir}"/>
<delete file="${build.dir}/manifest.mf"/>
<delete file="${dist.dir}/${dist.jar}"/>
<delete file="${dist.dir}/${dist.jad}"/>
<delete dir="${dist.javadoc.dir}"/>
<antcall inheritrefs="true" inheritall="true" target="post-clean"/>
</target>
<target name="post-clean"/>
<target name="pre-deploy"/>
<target if="deployment.do.override.jarurl" depends="init,jar,pre-deploy" name="override-jad">
<property value="${dist.jar}" name="deployment.jarurl"/>
<nb-jad aliaspassword="${sign.alias.password}" alias="${sign.alias}" keystorepassword="${sign.keystore.password}" keystore="${sign.keystore}" sign="${sign.enabled}" url="${deployment.jarurl}" jarfile="${dist.dir}/${dist.jar}" jadfile="${dist.dir}/${dist.jad}"/>
</target>
<target unless="skip.deployment" if="deployment.method" depends="init,jar,override-jad,pre-deploy" name="deploy">
<fail unless="deployment.scriptfile">Property deployment.${deployment.method}.scriptfile not set. The property should point to an Ant script providing ${deployment.method} deployment.</fail>
<ant inheritrefs="true" inheritall="true" antfile="${deployment.scriptfile}">
<property location="${dist.dir}/${dist.jad}" name="deployment.jad"/>
<property location="${dist.dir}/${dist.jar}" name="deployment.jar"/>
</ant>
<propertyfile file="nbproject/private/private.properties">
<entry pattern="000000" default="2" operation="+" type="int" key="deployment.counter"/>
<entry value="${deployment.counter}" key="deployment.number"/>
</propertyfile>
<replaceregexp replace="deployment.number=\2\3.\5\6.\8\9" match="^deployment.number=[0-9]*(0|([1-9]))([0-9])(0|([1-9]))([0-9])(0|([1-9]))([0-9])$" file="nbproject/private/private.properties" byline="true"/>
<antcall inheritrefs="true" inheritall="true" target="post-deploy"/>
</target>
<target name="post-deploy"/>
<target name="for-all-configs">
<antcall inheritrefs="false" inheritall="false" target="${target.to.call}">
<param value="" name="config.active"/>
</antcall>
</target>
<target name="jar-all">
<antcall target="for-all-configs">
<param value="jar" name="target.to.call"/>
</antcall>
</target>
<target name="javadoc-all">
<antcall target="for-all-configs">
<param value="javadoc" name="target.to.call"/>
</antcall>
</target>
<target name="deploy-all">
<antcall target="for-all-configs">
<param value="deploy" name="target.to.call"/>
</antcall>
</target>
<target name="rebuild-all">
<antcall target="for-all-configs">
<param value="rebuild" name="target.to.call"/>
</antcall>
</target>
<target depends="load-properties" name="clean-all">
<fail unless="build.root.dir">Property build.root.dir is not set. By default its value should be \"build\".</fail>
<fail unless="dist.root.dir">Property dist.root.dir is not set. By default its value should be \"dist\".</fail>
<delete dir="${build.root.dir}"/>
<delete dir="${dist.root.dir}"/>
<antcall target="for-all-configs">
<param value="clean" name="target.to.call"/>
</antcall>
</target>
</project>
I have pasted the content of that file, please do the needs....

How to find out the image size?

How to find out the image size values(Width and height) in illustrator CS3 using any script. I tried but i got only the document height and width. I need to find out the image BoundingBox value of width and height. Kindly advice me.

Try this.
tell application "Adobe Illustrator"
set heightImage to get height of raster item 1 of current layer of current document
set widthImage to get width of raster item 1 of current layer of current document
display dialog (heightImage & " X " & widthImage) as string
end tell
JaiMS

How do I change the dimensions of an image? The Image Size dialog box will not allow me to change it

How do I change the dimensions of an image? The Image Size dialog box will not allow me to change dimensions. I am taking an online class and the Image Size dialog box looks different than the one I am seeing in Photoshop CC. It has the option to change the dimensions.

When you say chage the dimentions, do you mean crop the image and adjust the size of the image at the same time, or do you mean you want to just resize the image? Can you post a screen shot of what you're trying to do?

How do I change the image size by pixels

In the older version of photoshop you could change the image size and change it by pixels independently. With photoshopcc if I change the width the height changes. How do you change the 2 values independently to get the desired size?

You'll want to use the Camera icon to upload your screenshot images when you reply.
But jml007 has the answer I think you want. Change the units from inches to pixels and click on the chain link to turn it off and enter your W H values independently.
Mark his answer as correct if this solves your issue.
Gene

How do you set a image in the background of a JTextfield?

How do you set a image in the background of a JTextfield? Any ideas?

You can't thats why it is called textfield!!!
Take a look at JScrollPane API for this

How do you set an image into the background of a JPanel or JFrame?

How do you set an image into the background of a JPanel or JFrame?

Something like this, Ive thrown in an ImageIcon on a
button too for good measure.
import java.awt.*;
import javax.swing.*;
public class JFrameImage extends JFrame {
public JFrameImage() {
Container c = getContentPane();
JPanel panel = new JPanel(){
 public void paintComponent(Graphics g) {
ImageIcon img = new
= new ImageIcon("background.jpg");
 g.drawImage(img.getImage(), 0, 0, null);
 super.paintComponent(g);
 panel.setOpaque(false);
ImageIcon icon = new ImageIcon("onButton.jpg");
JButton button = new JButton(icon);
panel.add(button);
c.add(panel);
public static void main(String[] args) {
JFrameImage frame = new JFrameImage();
frame.setSize(200,200);
frame.setVisible(true);
Going totally fancy pants
ImageIcon bigImage = new ImageIcon(bgImage.getImage().getScaledInstance(getWidth(), getHeight(),Image.SCALE_REPLICATE));
g.drawImage(bigImage.getImage(), 0, 0, this); Will scale the image to the size of the panel
whereas
for (int y = 0; y < getHeight(); y = y + image.getHeight(null))
for (int x = 0; x< getWidth(); x = x + image.getWidth(null))
g.drawImage(image, x, y, this); Will give a tiled effect
Try tiling with an animated gif and bring your processor to a standstill.

How do i set up email on iphone. i keep on getting an error that says, "We couldn`t connect to the server. Check your information and make sure it`s correct." all my info is correct, can someone please assit. it is the app OWA

how do i set up email on iphone. i keep on getting an error that says, "We couldn`t connect to the server. Check your information and make sure it`s correct." all my info is correct, can someone please assit. it is the app OWA

Is this a company email account? If so you may need to talk their technical support, as there may be additional layers of security which are preventing a connection.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it??? At the moment, if I view them on my laptop, landscape photos fill the screen, but portrait photos only show the middle part.

How can you shrink the size of an upright picture to make it smaller without losing any of the detail in it (in Slideshow)??? At the moment, if I view them on my Mac Laptop, landscape photos fill the screen, but portrait photos only show the middle part, so I loose the top and bottom of the picture. Have tried cropping, but that means I lose top and bottom part of the picture, so that is not the answer!!

Homestly haven't a clue what's going on there.
Try trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder.
(On 10.7: Hold the option (or alt) key while clicking on the Go menu in Finder to access the User Library)
(Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
What's the plist file?
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.

How do I make Firefox retain the image size of the display. Each time I move sites I have to resize image.

How do I get Firefox to retain the image size. Each time I change web sites I have to resize the image to get it all in the window. I open them full screen.
== This happened ==
Every time Firefox opened
== New Computer, just downloaded Firefox Windows 7

See:
http://support.mozilla.com/en-US/kb/Text+Zoom
http://support.mozilla.com/en-US/kb/Page+Zoom
http://kb.mozillazine.org/Zoom_text_of_web_pages
http://kb.mozillazine.org/browser.zoom.siteSpecific
Add-ons:
https://addons.mozilla.org/en-US/firefox/addon/6965 (the one I use)
http://urandom.ca/nosquint/
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''You''' ~~red:'''MAY'''~~ '''need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Start > Program Files, find and click Adobe Reader to open, click Help, click Check for Updates.
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer.
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to increase the image size without losing resolution in iPhoto?

Dear All
I have pics i took with my phone which is not an iphone, just little sony ericsson phone.
Is there a way to increase the image size without losing resolution in iPhoto please? Or cheap 3rd party software or shareware perhaps?
thank you very much.
veedeekay

iPhoto has no way to do that. You'll need an external editor for the job. Not all have the capability. I know Photoshop has.
You can set Photoshop (or any image editor) as an external editor in iPhoto. (Preferences -> General -> Edit Photo: Choose from the Drop Down Menu.) This way, when you double click a pic to edit in iPhoto it will open automatically in Photoshop or your Image Editor, and when you save it it's sent back to iPhoto automatically. This is the only way that edits made in another application will be displayed in iPhoto.
Regards
TD

How do I set the image size in PS touch to print to my Epson printer w ithout losing any of the picture. PS Touch appears to be showing pixels and not inches, how can I covert it toshow inches?

Similar Messages

Maybe you are looking for