How do I set the monitor to a bluetooth headset and real instrument thru built in jack?

So, here's the ingredients:
- Macbook white unibody running OS X Leopard, Garageband '11
- Nokia BH-504 bluetooth headset;
- One regular cable connected to an electric bass;
- One adapter to the built-in input;
The problem:
monitor the real instrument (the electric bass) via bluetooth headset.
No problem pairing the bluetooth device in question. No problem at all seting it up on GB.
But when I plug my bass to the built-in input I cannot hear it on the bluetooth headset.
Kinda confused, right? Was it clear enough?
Cheers!

Give https://addons.mozilla.org/en-US/firefox/addon/default-fullzoom-level/ a try - that should get you what you want

Similar Messages

How u will set the external parameters like packet size and number

How u will set the external parameters like packet size and number of parallel process.

Dear Karthik,
ALE:
Use Transaction UPSC02 - ALE Distribution Unit: Packet Types.
Performance Optimization for ODS Objects:
To ensure a good ODS object loading performance, take the following into account:
 1. Creating SIDs
The creation of SIDs takes a long time and can be avoided in the following cases by:
 Not setting the indicator for BEx Reporting if you are using the ODS object only as a data store. If you do set this indicator, SIDs are created for all new characteristic values.
 If you use line items (for example, document number or time stamp) as characteristics in the ODS object, in the characteristic maintenance, indicate these as Attribute Only.
SIDs are created in parallel if parallel activation is switched on (see last point). They are then created with the same number of parallel processes as created for the activation.
However, if you specify a server group or a special server in customizing, these specifications are not only valid for the activation, but also for the SID creation. The creation of SIDs runs on the application server on which the batch job also runs.
 2. DB partitioning in active data tables (technical A table)
By partitioning by database level, you can delete data from the ODS object much more quickly. As a partitioning criterion, choose the characteristic by which you want to delete. For more information on partitioning database tables, see the database documentation (DBMS-CD). Partitioning is supported by the following databases: Oracle, DB2/390, Informix.
 3. Indexing
Use selection criteria for queries for ODS objects. If the key fields are specified, the existing primary index is used. The more frequently accessed characteristic should appear on the left-hand side.
If you did not specify the key fields completely in the selection criteria (visible in the SQL trace), you improve the run time of the query by creating additional indexes. You can create these secondary indexes in the ODS object maintenance.
 4. Activation of data in an ODS object
To improve system performance when activating data in the ODS object, you can make the following entries in Customizing under SAP Customizing Implementation Guide -> SAP NetWeaver -> Business Information Warehouse -> General BW Settings -> ODS Object Settings:
 the maximum number of parallel processes when activating data in the ODS object as when moving SIDs
 the minimum number of data records for each data package when activating data in the ODS object, meaning you define the size of the data packages that are activated
 the maximum wait time in seconds when activating data in the ODS object. This is the time when the main process (batch process) waits for the dialog process that is split before it classifies it as having failed.
 the server group that needs to be used when activating the data in ODS objects in parallel You have to create the server groups beforehand using the following path: Tools -> Administration -> Network -> RFC Destination, RFC -> RFC Groups. If you do not specify anything here, then the activation runs on the server on which the batch process was started for activation. If a server from the server group is not active, then the activation is cancelled.
 5. Loading unique data records
If you only load unique data records (meaning data records with nonrecurring key combinations) into the ODS object, then the loading performance is improved when you set the indicator Unique Data Records in the ODS object maintenance.
The records are then updated more quickly because the system no longer needs to check whether the record already exists. You do have to be sure that there duplicate records are definitely not being loaded, because this will lead to termination.
Regards,
Naveen.

How do I set the same DNS for both Extreme and Express?

I have an Airport Express that is configured to extend the network created and routed through my AirPort Extreme. However, when I connect to the network from the room where the Extreme is, I need to have the automatic DNS in place in order to connect. If, later, I want to connect to the same network from another room through the Express that is extending it, I must replace the automatic DNS with 4.2.2.4 or there is no internet connection. I was wondering if anybody could walk me through properly configuring the devices to avoid having to change DNS when I move elsewhere in the house that is not directly covered by the Extreme main base. I am only experiencing these issues with my iPads, by the way. hank you.

No need to manually set DNS on any of the extending devices.....that is handled automatically during the setup.
The real issue here is not DNS.....it is that iOS devices like the iPhone and iPad do not usually switch wireless access points automatically when there are multiple devices delivering a wireless signal.
The iOS devices tend to connect to the first wireless router that they see.....and if you move the iOS device near another wireless access point that has a much better signal......the iOS device will stubbornly try to hold onto the original wireless access point.
Not much that you can do about that.....nature of beast with iOS devices due to their much simpler operating systems and antenna.
If you want to move the iPhone or iPad to another area, try turning off Wi-Fi on the device, then move it to the other area near another access point, wait a minute or two, and then turn WiFi back on. That will usually force the iOS device to pick up the signal from the closer AirPort access point.
By contrast, a Mac computer will automatically switch wireless access points as you "walk" it through the house to pick up the access point with the strongest signal. That is the way that iOS should work as well, but we'll have to wait to see if Apple ever delivers on this.
Lately....maybe due to an update....my iPhone will sometimes switch to a closer access point after a few minutes. My MacBook Pro switches quickly and automatically as soon as it moves closer to another wireless access point as I walk it down the hall.

How do i set the abilitilty to Maximize a frame and change his Size ?

to false
Thanks
i found it:
setResizable(false);
Message was edited by:
deviance

depends on the "View" style you have chosen in the Finder. This is "Columns" view 'Tool' location and is selected
In this View, single clicks Select items. The Sidebar is a top level with the Desktop (folder) selected > a folder therein selected > a folder within selected > yet another folder within selected > a file selected therein > and finally with the preview of the file displayed
One could Double click the hilited file to open it here OR click > slight pause > click to edit the filename
Double clicking folders in this view jumps straight to edit the foldername
If you want the traditional double-click to open everything you choose you must use one of the other two view tools.
or
All the icons in this area ARE single click to open or activate
is get info and
is Move to the Trash
The rest are either Apps or files that you place there by drag and drop from the Finder window lists
In this case
iTunes, Grab --------- two TextEdit files, a Macromedia Director 'player' file/miniApp, CalculatorApp, ChessApp
Some things change... and some things never do!
CCC

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

How do I set the length of each clip?

I have just begun trying to build a video with Premiere Elements 10
I have created many videos with Windows Movie Maker..found it boring for Effects etc.that's why I have this new software.
Now my question is ..How do I set the time for each clip?
I like to add a clip that goes with each lyric in the song.
Thanks.

Welcome to the forum.
As Steve points out, that is "editing."
One can use either of two Tools in PrE, to Trim the Clip to suit.
First, one can Dbl-click on the Clip in the Project Panel to open it in the Source Monitor, which looks a bit like the Program Monitor, but it has the In & Out Point settings. When that Clip has been Trimmed, as needed in the Source Monitor, just drag it to the Timeline.
Or, one can drag the Clip to the Timeline, and then click+drag on the Head of the Clip to set its In Point, and on the Tail, to set the Out Point.
Good luck,
Hunt

How to turn off the Monitor???

Hey friends!
Is it possible to turn the Monitor (Display Device) ON and OFF from a java application???
Thanks a lot!
Ricardo

Hi! This is completely Windows-specific, and I found it on a website, so I don't take credit for it. Hopefully you do know how to use JNI, so here's the C code you could try out (no I haven't tried it yet).
JNIEXPORT void JNICALL Java_JNative_turnOffMonitor (JNIEnv *env, jclass cls)
SendMessage (HWND_BROADCAST, WM_SYSCOMMAND, SC_MONITORPOWER, 2);
}2 turns off the monitor, HWND_BROADCAST sends the message to all top-level windows, 1 sets the monitor to low power and -1 switches the monitor back on. Please use at own risk, and you'll probably want to have some more error handling in your code if you do plan to use it. You will need to include windows.h and user32.lib (unless you are dynamically linking) for the code to compile.
Hope it helps.
Cheers
P.S. Here's the website I found it in (note, the code's in Delphi, so I just took the API calls, and modified the first parameter to HWND_BROADCAST). http://chiragdalal.tripod.com/howto/monitor_on_off.html

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.

How do I set the thumbnail image of my videos that export to my computer? I'm using Premiere Elements 11 on a windows 8.1 PC 64bit.
Or how does Premiere 11 determine where to set the image for the video it is exporting?
I already know how to use Freeze frame and save the image to my computer by Publish+Share/Computer/ Immage.
Thanks,
Mike

Mike
This is not Adobe. Rather user to user. We are all visitors here.
Just a bit of history....back in the days of Premiere Elements 4, you could set a "poster frame" in what was called the Project area. You did this by right clicking a blank area there and, from the drop down menu that appeared, selecting View/Preview Area, and using the poster frame feature there.
As I said, when a video imports into Premiere Elements, the thumbnail of the import has been presenting as the first frame of the video. With this Preview area "poster frame" option, you could set the video's thumbnail in the Project area so that the first frame was another frame in the video. But, this "perk" was restricted to thumbnails of the video in Project area.
If you exported to file with the first frame modified video, the export's thumbnail in Windows Explorer would present with other than the real first frame or the poster frame as the first frame.
Also, in more recent versions, I have observed that the export to file does not display the real first frame of the video in Windows Explorer. Seems random, but I have not kept track.
And, remember, at the onset I wrote
As far as I have ever seen, Premiere Elements Windows uses the first frame of the video for its thumbnail in the program.
I know of no way within Premiere Elements to control what the program opts to do in this matter. In some compatibility
issues, it opts to give no image but a generic one.
I did not say that you can expect to have the Premiere Elements' export file's thumbnail in Windows displaying with its real first frame. And, the more you get into this, depending on the versions, more details need to be added to my comment about "...first frame of video for its thumbnail in the program..."
I would have to look into all this further to get perspective on the contributing factors.
ATR
Add On...The Poster Frame feature appeared in versions 4, 7, 8, and 9 by my count.

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (use my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit to my TV?

I am trying to play a DVD on my MacBook Pro and transmit it to my TV (using my TV as the monitor) utilizing a VGA cable and adapter for the Mac but the only image that shows up on the TV is the MacBook wall paper, any ideas on how I can transmit the movie from my MacBook to the TV? I also tried an HDMI cable and had the same issue.

you are probably seeing the extended display.. to see ur main display go to pefrences then display steeings and turn mirroring on.
this will display ur mbp main screen. good luck.

How do you set the time period on IMAP email accounts (razr maxx)

Hi Guys -
Does anyone know how you can set the time period that the stock email will keep the already downloaded messages for IMAP email accounts?
Mine never seems to show more than a couple of days worth at a time. I'd ideally like to be able to see at least 2 weeks worth of messages without needing to download them again!
On other phones I've had there was a setting in the menu, but either I can't find it...or it's not there. I've found the setting for how OFTEN it checks the accounts, but not the setting I am seeking.
Your help is appreciated!
Best Wishes for the Holiday Season.
-Rich

Hey Rich. Once in 'settings,' there should be a "days to sync' under the 'data usage' section. You don't have that?

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How do i set up my apple id with itunes and the appstore?

How do i set up my apple id with itunes and the appstore?

iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
http://support.apple.com/kb/PH1726

How can I set the page that will open, when I open a new tab, to be the same as the homepage?

How can I set the page that will open, when I open a new tab, to be the same as the homepage?
An app changed it to some other search engine, before installing the app, I the tab that would open was the homepage I set.
In my case it is Google, and I want my new tabs to open on Google like they did before the installation.
thank you,
Asaf Privman.

You can middle-click or Ctrl left-click the Home button on the Navigation toolbar to open the Home page in a new tab.
You can look at one of these extensions:
* NewTabURL : https://addons.mozilla.org/firefox/addon/newtaburl/
* New Tab Homepage : https://addons.mozilla.org/firefox/addon/new-tab-homepage/

How do I set the audience when I'm using Siri on my iPhone 5 to post to Facebook

How do I set the audience privacy for when I’m using Siri on my iPhone 5 to post to Facebook?
When I ask Siri to post a message to my Facebook Siri tells me what I have said and then asks tot post it, I then checked on my computer and the post is visible to "ME ONLY" I can change this on the computer and on my phone via the App but I do not want to be doing that all the time.
If I post to Facebook via Siri on my iPhone 5 I want it at the default setting of friends only.
So How do I change this?
I posted the first one 2 minutes ago then went into Facebook via the App and changed it but did a second one hoping that the default privacy had changed but it was again to me only. As you can see via the padlock. Please help. Thanks

What if you do need help or emergency situation while Posting FB via Siri is the fastest way to show you or someone is in danger, and he/she is dying because the post is Only visible to Me !?!?!?!???
Anyone who uses FaceBook to get immediate help for life threatening emergency is mercifully removing themselves from the gene pool.

How do I set the monitor to a bluetooth headset and real instrument thru built in jack?

Similar Messages

Maybe you are looking for