How do I set the number pad to work with spaces?

It has worked with other OSs but with Mavericks 10.9.5 (and from what I here, Yosemite) you can not use the number pad to change spaces. I know I can use the numbers across the top or the arrows, I just find it quicker and ergonomic to use the number pad. As many spaces I use this is very inconvenient to be reaching across the keyboard. Is there a way to fix this. I went to the preferences but could not find anything there to change. Maybe Apple could fix this in there next update.

Apple doesn’t routinely monitor the discussions. These are mostly user to user discussions.
Send Apple feedback. They won't answer, but at least will know there is a problem. If enough people send feedback, it may get the problem solved sooner.
Feedback

Similar Messages

  • How can I get the number pad to work (input characters) on my new plugin Mac full keyboard when connecrted to my mackbook?

    The number pad on by Mac USB keyboard does not work (no input).  I have updated the Mac keyboard drivers and that did fix the problem.  How can I get this keyboard to work when connected to my Powerbook?

    Do you have "Mouse Keys turned on in System Preferences / Universal Access ?
    Mouse Keys     Turn on to use the keyboard instead of the mouse to control your computer

  • How do you set the remote only to work with the MacBook and not the Hi-Fi.

    I have a Hi-Fi Apple stereo hooked up to my Macbook but when I use the Apple remote, it controls both things.
    So if I am scrolling through my music in Frontrow then the volume on the Hi-Fi stereo is turning down or up depending on which way I am scrolling.
    My question is:
    How do I make the remote work with only my MacBook?

    Pair the remote with your macbook by isolating it point the remote at it while holding down the menu and next buttons. You see like a chain appear and that will mean the remote is paired. Now only the macbook will only respond to the macbooks remote. Do the same with the Hi-Fi remote and now the hi-fi will only work with the hi-fi remote.

  • How do you set the number of rows in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    How do you set the number of rows you want in a spreadsheet, so that even when you drag data in, in writes over those rows instead of adding a new row?

    After the discovery reported above, I filed this report :
    Bug ID# 10073038
    Summary:
    When Numbers is used on a system with decimal comma a csv file may be good AND wrong
    Steps to Reproduce:
    With Numbers v2, you introduced an interesting enhancement.
    In system using the comma as decimal separator, Numbers requires csv files using the semi-colon as values delimiter.
    In fact it’s true if we OPEN the document dragging its icon on Numbers one or thru the open dialog.
    This said.
    (1) Drag and drop a csv built with the 'semi-colon' standard on a table or on a sheet
    (2) Drag and drop a csv built with the 'comma' standard on a table or on a sheet
    Expected Results:
    Every normally constituted user assume that in
    case (1) he will get a perfectly built table
    case (2) he will get every cells of a row in a single cell
    Actual Results:
    In fact you forgot the drag and drop way of use and in
    case (1) every values separated by semi-colon are inserted in a single cell
    case (2) values separated by comma are correctly spread in a table
    isn’t it ridiculous ?
    Regression:
    Except looking in  QuickView to see which is exactly the structure of the file to decide the way we will insert it in a Numbers document, we may use an applescript fair enough to replace the semi-colons by TAB characters
    or
    to replace the commas by TABs and the decimal periods by commas
    Notes:
    While I am on this subject, I wish to make two proposals:
    (1)  It would be fine to format the date according to the ISO format year-mm-dd when you export a Numbers doc to csv.
    Doing that, dates would be imported correctly in every countries.
    At this time, on an English system, you export as mm/dd/year.
    If the doc is open on a system using the format dd/mm/year, the results will be odd.
    On a system using the format dd/mm/year, you export this way and so, if the doc is open on a system using the format mm/dd/year the results are odd too.
    As every localized versions accept the ISO format (at least on entry), using it in the export scheme would give a correct behavior everywhere.
    (2) It would be fine to add the format Tab Separated Values in the Export pane.
    TSV + ISO date format would give documents opening flawlessly everywhere.
    Yvan KOENIG (VALLAURIS, France) dimanche 4 septembre 2011 21:27:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
    My iDisk is : <http://public.me.com/koenigyvan>
    Please : Search for questions similar to your own before submitting them to the community

  • How can I set the number of test sockets in my program?

    How can I set the number of test sockets in my program? I use LabWindows/CVI  6 and TestStand version 2.0.
    And I use BatchModel for the parallel UUT running. I didn't found program way to set the number of test socket. I think I should have it. In TestStand I can change the number of test sockets through menu Configure -> Model Options -> number of test sockets (I mean I do it by manual mode).
    Thank's a lot.
    Maria

    One way you can set the number of Test Sockets for your sequence is by overiding the ModelOptions Callback used by your sequence. Select All Sequences from the View drop-down then right click, select Sequence File Callbacks, select the ModelOptions callback and then click on Add. You can then select the Edit button to Edit the ModelOptions for your sequence. You can set other ModelOptions as required also.
    RG

  • How can I set the number of rings before going to voicemail?

    Help please..... my phone rings more than 10+ times before rolling to voicemail. How do I set the number of rings I want? I am missing calls as callers will not wait through through so many rings to get to vm if I am unable to pick up the call. Thank you for any help you can give!

    You can't. Try contacting your phone carrier as they handle voicemails.

  • 8330 Call Forwarding​...How do I set the number of rings before calls are forwarded?

    8330 Call Forwarding...How do I set the number of rings before calls are forwarded? Right now it instantly forwards my calls but I don't want that. I want to change it so that let's say that if after 5 rings I don't answer the call is forwarded. I've looked everywhere for an answer but have had no luck. Any help would be appreciated. I am with Virgin Mobile if this makes a difference.
    Thank you 
    Message Edited by 8WDDdotcom on 08-01-2009 02:39 PM
    Message Edited by 8WDDdotcom on 08-01-2009 02:44 PM

    Well, call forwarding is a feature provided by your carrier -- it is not a function of the device. However it works for your carrier is how it works. Actually, from what I understand about call forwarding, it normally is an all-or-nothing circumstance...calls forward to the number you've asked them to be forwarded to, keeping you in a DND status. Regardless, though, if your carrier tells you how it works on their system, there's nothing that the device can do to override that. Unless there is some kind of 3rd party app that would do it, bypassing (somehow) the carrier network CF feature...but I've never heard of such a thing.
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • HT4515 how do I set the number of rings before the caller goes to voice mail ?

    How do i set the number of rings before the coller goes to voice mail on my iphone?
    Thanks you.

    Determined by your carrier, so contact them.

  • How can I set the number of batch process for DTP globally?

    Hi guys,
    How can I set the number of batch process for DTP in system globally?
    For eg. set the number to 1
    Any hint is appriciated!
    Regards,
    Liying

    Hi,
    In DTP screen also you can view batch settings. Check the Settings menu, you will find Batch.
    Reg
    Pra

  • How do I set the number of columns for JTextPane

    I only found a method setSize() of JTextPane class. How can I set the number of columns in a JTextPane? Each column can be written one letter.
    Thanks.

    You're not going to use FontMetrics to change the width of the characters; you're going to use it figure out how wide a single character is. Then multiply by the number of characters you want to have in a line, and presto! You know how wide to make your JTextPane.
    Unless I've misunderstood your problem, of course.

  • How do i set the iphone to auto sync with the mac book pro

    how do i set the iphone to auto sync with the mac book pro?

    Iphone Sync Support wrote:
    Thanks but this is not what I am looking for.  I am looking for the settings - setting that allows our iphone to auto sync with your mac book when you make a puchase on either device.
    You aren't going to sync with my MacBook when I make a purchase.
    And you are not going to autosync your iPod with the MacBook unless you tell it to sync or plug it in.
    You can enable Automatic downloads when you make a purchase.
    iTunes settings > Store.
    When you make a purchase, it will automatically download that purchase to devices set up the same way.
    This is not the same as autosyncing your device to your computer (as you first asked).

  • I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio

    I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues vision 2013. The adobe pdf converter  plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

    For MS Visio (any version) only the appropriate version of Acrobat *PRO* provides PDFMaker for Visio.
    For Visio 2013 specifically you must have Acrobat XI Pro (updated to at least 11.0.1).
    See: 
    http://helpx.adobe.com/acrobat/kb/compatible-web-browsers-pdfmaker-applications.html  
    Be well...

  • I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

    I want to buy iPad Air online, how do I know the one that can work with Nigeria gsm network.

    Take a look at HeadRoom (headphone.com). It's a fabulous resource for all types of headphones, with great guides and useful reviews.
    http://www.headphone.com/

  • How do I set the number of Plays?

    01Jul2011
    I need to change the number of plays of some mp3 files in itunes.  How do I change files that were played, but not counted as plays to played? 
    I have audio lectures, in order in a playlist that I don't want to hear again.  My playlist is set only to list unplayed (plays <1)  audio files.  Sometimes the ipod I use to listen to the files locks up and does count the completed files as played (Plays = 1).  How can I set the Plays from 0 to 1?
    Thank you for your help with this.
    Regards,
    chhenden

    Start the file playing in iTunes then click on the right end of the play progress bar.  Playback will end. The play count will increment and the next track will begin to play.

  • How do you set the number of visible items in the popup box of a JComboBox?

    Hi,
    Do you know how to set the number of items that shall be visible in the popup box of a JComboBox?
    I have produced an implementation of an autocomplete JComboBox such that following each character typed in the text field, the popup box is repopulated with items. Normally 8 items are visible when showing the popup box. Sometimes even though the list of items is > 8 the popup box shrinks in height so that 8 items are not visible.
    Thanks,
    Simon

    Below is my JComboBox autocomplete implementation.
    The problem seems to occur when the list of items is reduced in number, the button selected and then the list size increased, the popup box does not automatically increase in size. I have tried setMaximumRowCount � but does not resolve the problem.
    To see how it works:
    1)     click in text field.
    2)     Type 1 � the full list of items are shown.
    3)     Type 0 � the list has been narrowed down � the popup box is greyed out for remaining items.
    4)     Type Backspace � the full list of items is redisplayed.
    5)     Type 0 � to narrow down the list.
    6)     Select button � the popup box is invisible.
    7)     Select button � the popup box is displayed with 2 items.
    8)     Select Backspace � here is the problem � the combo box list contains all items but the popup box has been shrunk so that only 2 are visible.
    9)     Select button � popup box is invisible.
    10)     Select button � popup box is as expected.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    import javax.swing.tree.*;
    import java.util.Enumeration;
    import java.util.Vector;
    import javax.swing.plaf.basic.*;
    class Test
    private JComboBox jCB = null;
    private JTextField jTF=null;
    private String typed="";
    private Vector vector=new Vector();
    public Test()
    JFrame fr=new JFrame("TEST ComboBox");
    JPanel p = new JPanel();
    p.setLayout( new BorderLayout() );
    ComboBoxEditor anEditor = new BasicComboBoxEditor();
    String[] s = new String[30];
    for (int i=0; i<30; i++) {
    s[i] = (new Integer(i+10)).toString();
    jTF=(JTextField)anEditor.getEditorComponent();
    jTF.addKeyListener(new KeyAdapter()
    public void keyReleased( KeyEvent ev )
    char key=ev.getKeyChar();
    if (! (Character.isLetterOrDigit(key)
    ||Character.isSpaceChar(key)
    || key == KeyEvent.VK_BACK_SPACE )) return;
    typed="";
    typed=jTF.getText();
    fillCB(vector);
    jCB.showPopup();
    jCB = new JComboBox();
    jCB.setEditor(anEditor);
    jCB.setEditable(true);
    boolean ins;
    for (int x=0; x<30; x++)
    ins = vector.add( new String(s[x]) );
    fillCB(vector);
    jCB.setSelectedIndex(-1);
    fr.getContentPane().add(p);
    p.add("South",jCB);
    p.add("Center",new JButton("test combo box"));
    fr.pack();
    fr.show();
    public void fillCB(Vector vector)
    typed = typed.trim();
    String typedUp = typed.toUpperCase();
    jCB.removeAllItems();
    jCB.addItem("Please select");
    for(Enumeration enu = vector.elements(); enu.hasMoreElements();) {
    String s = (String)enu.nextElement();
    if (s.toUpperCase().startsWith(typedUp)) {
    jCB.addItem(s);
    jTF.setText(typed);
    public static void main( String[] args )
    Test test=new Test();
    Many thanks,
    Simon

Maybe you are looking for