How do I set the transition between access points would be fine?

Hello everyone,
We have an organization Wirless controller 2504 with 20 aironet access-point (700 series)
Once I defined all the access points I noticed that the transition between them is not working fine...
I mean that clients can not walk around in our organization without having to connect to any access point separately.
How do I set the transition between access points would be fine?
Thanks a lot (:

HI Omri,
which software version you have on WLC ?
Is the site survey done propely ?
Remember: It is the client that decides when to roam and which AP to connect to based on what it perceives the signal to be.
If your site survey design is perfect and still have problems while roaming then:
Disable your lower data rates on the 2.4ghz and or 5ghz radio and your clients will roam better. Try to disable everything below 11mbps. and give that a try.May be old device will work in this case.
Regards
Dont forget to rate helpful posts

Similar Messages

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How can i set the space between two button?

Hello,
I have
<mx:HBox>
<mx:Button label="one" />
<mx:Button label="two" />
</mx:HBox>
how can i set the distance between this two compotents?
Thanks

quote:
Originally posted by:
robinbouc77
Hi,
you can use horizontalGap property on HBox to change the
space between your buttons. I think the default value is 6. You can
also use <mx:Spacer/>, but changing the gap on HBox is
probably the cleanest way ;)
C U
perfect!!! works fine

How can I set the time between how long my phone plays a text msg ringtone if I don't respond the first time?

If I don't respond the first time, how can I set how many times/seconds it plays the next time until I respond?

Actually, there is!
http://www.apple.com/feedback/iphone.html

How can I set the spacing between lines in my document?

I am trying to set the spacing in my Pages document. It looks like it is using a space and a half and I would like to change that to just a space.

More Pages users will see your topic if you post in that community > Pages: iWork: Apple Support Communities
And a Pages user manual to refer to > manuals.info.apple.com/MANUALS/0/MA524/en_US/Pages_UserGuide.pdf

How do i set the multiplicity between two entities to any custom value?

Hello people,
is there a way to set the multiplicity of a relation to custom values instead of only 1 or * in the logical model?
I really need to set it to "1..2" but can't find an option to set own numbers. What should i do? Shall I just create a note saying "1..2" and stick it to the corresponding entity? I'm used to do models in UML (visual paradigm - where you can change such things easily) but now i have to use the SQL Developer 3.2
I would appreciate any help.
Thanks
Edited by: 961075 on 24.09.2012 15:54

Hello,
it's not possible.
Philip

How do i set up a wireless access point with ny time capsule

I am using a new Airport Extreme and want to utilize my older TC to create a wireless access point or maybe an aditional router using the same newtwork. What are the steps to set this up?
Thanks
Alamo

You will first need to perform a Factory Default Reset on the Time Capsule.
Resetting an AirPort Base Station or Time Capsule FAQ
Then, temporarily locate it in close proximity (same room or nearby) to the AirPort Extreme.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click the tab in the upper left hand corner of the AirPort Utility window that reads Other AirPort Base Stations (1), then click the Time Capsule
AirPort Utility will take a moment or two to analyze your network, then announce that the TC will be configured to extend your wireless network.
Enter a name for the TC (you can use the same device name that you used before if you wish) and click Next.
AirPort Utility will take a another minute or two to configure the TC and then tell you that the setup is complete. Click Done
At this point, power down the TC and move it to a location that is approximately half the distance from the AirPort Extreme and the area that needs more wireless coverage.....to give the TC a good strong signal to "extend"
Power up the TC and wait for the green light and then you are all set.

How can I set the data binding between Web Dynpro & Database table

Dear friend,
I am a beginner of Web Dynpro. I want to develop my simple project like these:
1. Create my own database table via Dictionary Project such as TAB_USER and have 3 fields: USER_ID, USER_NAME, USER_POSITION and I have already deployed & archived it.
2. Create my own Web Dynpro Project, and create the input fields as User ID, User name, User position and icon 'Save' on the selection screen and I have deployed it already.
For the process, I want to input data at the screen and save the data in the table, please give me the guide line like these:
1. How can I set the data binding between Web Dynpro and Database table ?
2. Are there any nescessary steps that I will concern for this case?
Sorry if my question is simple, I had try to find solution myself, but it not found
Thanks in advances,
SeMs

Hi,
You can write your own connection class for establishing the connection with DB.
Ex:
public class ConnectionClass {
static Connection con = null;
public static Connection getConnection() {
try{
Context ctx = new InitialContext();
DataSource ds = (DataSource) ctx.lookup("jdbc/TSPAGE");
con = ds.getConnection();
return con;
}catch(Exception e){
return null;
You can place the above class file in src folder and you can use this class in webdynpro.
You can have another UserInfo class for reading and writing the data into the DB .
Regards, Anilkumar
PS : Refer
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/java/simple java bean generator for database.pdf
Message was edited by: Anilkumar Vippagunta

How to set the transition duration of a slide in keynote with applescript

hi
how to set the transition duration of a slide in keynote with applescript
i made an applescript script which converts a numbers file to a keynote presentation
figured out how to set the transitions but cant find how to set the time
+set appTransition of slideTransition of current slide to "apple:dissolve"+
anyone?

you can send keystrokes to invoke menu commands via shortcuts but as for transition time not sure. You've check the dictionary right? Scripting support is very limited in KN.

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just got InDesign CS6 and am running it on an iMac and I know the license is good for two computers which will come in very handy for me. How do I set it up to access it from my second iMac?

I just had an afterthought, Peter, if I could bother you further; if the downstairs iMac that I want to access it from is in my wife's name and not mine (even though I'll be the one using it on her computer) does that affect anything or can I simply load the software straight into her computer without any complications?

How to set the margin between panel?

i have added four panels to a frame by borderlayout, however, i think that they are too close together...
any method that can be used, such that i can increase the margin between four panels?
thx

thx u ...
however, it just increase the margin between the four
panels, how can i increase the margin
between the panel and the frame?
thx u again..JPanel contentPane = new JPanel(new BorderLayout(4,4));
// next line answers question above
contentPane.setBorder(BorderFactory.createEmptyBorder(4,4,4,4));

How can I set the time in Time-based Access control ??

I live in Denmark, where we use the 24 hour system.
So I want to set the time-based access control to from 7.00 in the morning to 2.00 at night, but every time the Timecapsule says wrong time format, I can use the night time 23.59, but thats not late enough.

Set two controls.. 7 to 23.59 and 00.01 to 00.20
This is common as the control cannot handle times longer than 1day.

How can i make a transition between clips on cutaway?

how can i make a transition between clips on cutaway?

ninafromlisboa wrote:
But if I want ONLY fade out (or in) I can't do it...
OK, I understand what you mean now! I assumed you were asking about the normal Fade In or Fade Out using the transition from the Transitions panel. But I guess you mean the Fade function specific to a Cutaway. When you double-click on a Cutaway the Inspector opens. Here you can set the Cutaway Fade duration. But as you say, it only provides for both fade in and fade out as one operation - you can't set the fades individually (it's both or nothing).
BUT, try the method outlined by Karsten Schluter above. It will give you the same effect and will enable you to fade either side of the Cutaway (or add other transitions).
John

How do I set up devices to access my mobile hotspot once its on?

How do I set up devices to access my mobile hotspot once its on?

Great question Bnrybtch019. It's important to have access to all your features, I can help you with that. Since you didn't specific a phone model, these are the steps for a popular Android-Operating Phone http://vz.to/1yrBX0e .
AdaS_VZW
Follow us on Twitter at @VZWSupport

How can I set the default line height?

Greetings,
I have a report that displays observed behavior in a list format like the one below:
Behavior Observed:
    Withdrawn
    Happy
    Sad
    angry
There are 5 responses as to the severity of the behavior or it is left blank if the behavior was within normal limits.
So the output would look like this:
Behavior Observed:
    Withdrawn            (mild)
    Happy
    Sad                      (moderate)
    angry
The problem is that when this report was designed the details sections were not uniformy formatted and the spacing between data elements is hard to follow from the label to the data field. I tried to set the details to be uniform by selecting "Arrange Lines", however when I do this, the data is displayed too close horizontally. So my question is how do I set the default line height for each field so that they are uniform in distance from each other but not too close due to the font height?
Does this make sense?
Thank you,
Kevin

I'm confused... How are you associating line height with horizontal field spacing???
If you have this...
Behavior Observed:     Severity:
Withdrawn          (mild)
Happy
Sad               (moderate)
angry
But want it to look like this...
Behavior Observed:
Withdrawn (mild)
Happy
Sad (moderate)
angry
all you have to do is create a concatenation formula. Something like this...
{TableName.BehaviorObserved} & " (" & {TableName.Severity} &")"
Sorry if I've misunderstood what you are trying to do.
Jason

How do I set the transition between access points would be fine?

Similar Messages

Maybe you are looking for