How do I set up a 4620 office jet on an airport network with only an iPad?

I only have an iPad and set up airport network no problem, but HP office jet 4620 printer won't connect without wps or computer. Any ideas?

Hi Neil1950,
You will be doing this wirelessly without the need for a cable. From the iPad Settings icon, click on Wi-Fi>Network>Select the printer's network to connect using the same steps listed above.
After your iPad is connected,
1. Open Safari in the iPad and enter 192.168.223.1in the addressbar and press enter.
2. Navigate to the WIreless Setup Wizard to setup your printer on your network.
3. Follow the steps to join your printer on the network.
Please click the blue Kudos star in the post that helped you.

Similar Messages

  • How do i set up hpeprint on office jet a8500g

    The discription for getting the printer claim code does not work for 8500.  how do i get claim code for 8500

    HI jsn,
    Here are the steps to enable web services and get the claim code for your printer.
    1. Get the printer connected to a wifi network.
    2. Click on the eprint icon button on the touch panel of the printer.
    3. Proceed with the instructions.
    4. This will enable web services on your printer and print a information sheet which contains a claim code along with the instructions.
    method 2:
    If you have your laptop and printer connected to the same network you can enable web services using embedded web service page.
    1. Connect both Printer and Laptop to the same network.
    2. Type the IP address of the printer in a browser address bar and hit enter button on your laptop.
    3. This should open the EWS page.
    4. Proceed to the Web Services page and click on enable.
    5. this should enable web services and print the information sheet with the claim code.
    Kind Regards,
    oliver
    "Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
    "Say "Thanks" by clicking the Kudos Star in the post that helped you.

  • How do I set up for extending my non-apple wi-fi network with Airport Express?

    I have Trendnet router that I use for providing wi-fi capabilities in my home.  The problem is that it is set up in my basement and it doesn't extend to the back of the house.  I'm also having problems setting up my wireless printer with this setup.  I thought that by getting a AE, I could take care of these two things.  I could set up the AE upstairs to repeat the wireless signal and at the same time have an easier set up (as in an apple).  But, I'm not sure how to set it up.  Can someone help?

    Do you have a separate modem and Trendnet router now, or is the Trendnet a gateway....combination modem/router in one box?  If you add another AirPort at this location, it will need to connect to a modem, or it could connect to your Trendnet router and you could turn off the wireless on the Trendnet
    If you go wireless all the way, what is the approximate distance between the "main" router and the "remote" AirPort?  How many walls will be in the signal path?  How are these walls constructed?
    In general....I have found that power line works better than wireless....unless you have a very good wireless connection. If you take your computer to the remote area where the extender will be located, and you can get a good, solid wireless signal, you are probably OK.  The Express can only "extend" the quality of signal that it receives.
    But will the wireless setup for video streaming (which is my main goal) be reliable?
    Questions like this cannot be answered because it is just not possible to predict wireless performance and results in advance of any installation.  The products might be great....but other wireless networks around you or cordless phones cause interference problems.
    In this regard, If I only had one chance at a network, I would go with wired connections over wireless.
    If you go with the 2 AirPort Express plan, I would suggest that you still have a "Plan B" if wireless does not deliver the performance you want. Personally, I would never try to stream video, especially high definition, over wireless here at the house, but it can work if everthing else falls into place....and the planets are in the right alignment.

  • How do I set up a secured WI-FI account using Airport Extreme

    How do I set up a secured WI-FI account using Airport Extreme

    Read the user manual that came w/it! 

  • How can iSync my iPad to my hp office jet 6600 so I can print from my iPad

    I am trying to sync my iPad with my hp office jet printer 6600

    Hi,
    You can't iSync your iPad to your printer, full stop. If you wish to print from your iPad you need to connect them (iPad and printer) on a SAME network. And because your printer is not on the following list:
        http://support.apple.com/kb/ht4356
    The following app MAY work:
        http://itunes.apple.com/au/app/hp-eprint/id299531647?mt=8
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I'm suddenly unable to join my Airport network with my PowerBook G4.  I am able to access my network with all of my other devices.  How can I once again establish access using my PowerBook G4.

    I'm suddenly unable to join my Airport network with my PowerBook G4.  I am able to access my network with all of my other devices.  How can I once again establish access using my PowerBook G4?

    Bruce777 solved this for me, thank you Bruce! My printer now works perfectly on my new wifi network!
    Bruce's  instructions, for anyone else having the same issue:
    - delete any previously set up printers
    - scrub old hp software and update software to get the hp 2.8 drivers
    - remove the usb cable from the printer if you have one connected
    - reset the printer network to hpsetup (hold down the power button and press network button 2x and then cancel 3x, release power button.)
    - print out the wireless network test report (hold down the network button and press the update button 2x). verify the network name / ssid is hsetup
    - got to sys prefs > network and change the mac wireless network to hpsetup
    - go to the sys pref > print scan
    - add the HP 8000 printer
    - click on the options and supplies button and click on the Show Printer Webpage
    - click on the networking tab > wireless in the left pane > start network wizard and change the network from hpsetup to your network
    - finish (this page may freeze up.  close the browser)
    - go back to the sys prefs and change the wireless network back to your networt
    - go to the printer and print out the wireless network test report (press network button and update button 2x).  Check that the SSID is your network
    - go to sys prefs > print scan > select your printer > options & supplies > show printer webpage > network info (check ssid and compare to wireless network test report)
    - try printing something to your printer.  It might take a little time the first print.

  • How to hook up a G3 iBook to a home network with only Windows machines?

    Before I attach an iBook (Mac OS 10.3.9) to a home network with only Windows machines, what should I know? (I intend to connect the iBook to an Ethernet socket on my Westell modem+router.) My reason for doing this is to back up a million family photos in the iBook's iPhoto Library.
    This is the iBook:
    Machine Model: iBook (Dual USB)
    CPU Type: PowerPC 750 (2.3)
    Number Of CPUs: 1
    CPU Speed: 800 MHz
    L2 Cache (per CPU): 512 KB
    Memory: 640 MB
    Bus Speed: 100 MHz
    Boot ROM Version: 4.6.4f1
    System Version: Mac OS X 10.3.9 (7W98)
    Kernel Version: Darwin 7.9.0
    Please give me as much detail as you can stand to write, because I know nothing about Apples. It's for my dear old Dad, who has no other way to back up priceless photos.
    For example, when things are working well and the iBook "sees" the Windows machines, how do I copy the iPhoto Library?
    Thanks!!

    Hello,
    When I got my first mac this ( http://macs.about.com/cs/tipstutorials/a/xposxsharing.htm ) article helped me enormously.
    It's very easy to write to the disc once you've set up the network.
    On the mac locate the iPhoto library (normally open finder and click on pictures).
    Open another finder window and locate the windows PC on your network, then mount the folder to which you will back up the iPhoto library.
    Drag the iPhoto library to this folder.
    Wait.
    Wait some more.
    When the copy is complete check the images can be accessed from the PC.
    Unmount the folder from the mac by dragging it to the trash.
    Congratulations.
    Beware though, if you're like me you'll find this apple thing adicitve!!!

  • How do I set an out of office response?

    I'm going out of town and need to set an out of office reply to incoming emails. How do I do this?

    This feature depends on your e-mail provider, but with Apple's iCloud you can do this by logging into icloud.com, clicking the "Mail" application, and then clicking the gear menu at the top-right to get to the preferences. Then go to the Vacation settings and enter a message as an automatic reply to send. Checking the box to automatically reply will enable this feature.
    Alternatively you can set up a rule in Mail on your Mac to act on any received message and send a reply.

  • We have three Ipads in our house.  We have one itunes account with multiple devices like two Iphones and Apple TV.   My question is about our three Ipads.   How can I set up the imessaging and facetime on all three devices while only using one Itunes acct

    Okay.  We have three Ipads in our house with only one Itunes account.   When I go into imessaging and facetime on each of the devices, it wants to start switching my wife's cell phone and then the three emails associated with each Ipad to the contact information for all of the Ipads.    As of this morning, only the imessaging and facetime are turned on my wife's iphone and ipad.   My kids imessaging and facetime is turned off.     Do you really have to have an itunes account for each device to make then work???    Any help would be very much appreciated.
    Ryan

    There is only one solution. Each user must have their own separate user account. All of their respective data would be contained in their separate user accounts. This also means each will have a separate iTunes Library. If you all use the same third-party apps, then each will have to purchase their own copies under their own Apple IDs. Some data sharing is possible. See:
    iTunes- How to open an alternate iTunes Library file or create a new one
    iTunes- How to share music and video
    iTunes- How to share music between different accounts on a single computer
    iTunes- Setting up Home Sharing on your computer

  • How do i set up apple account on iphone to use icloud between my iphone and ipad

    how can i set up apple account on my iphone 4 so i can use icloud between my iphone and ipad

    To set up iCloud on the iPhone and iPad, ensure your software for these devices is up to date.  Once it is, see the following article - http://www.apple.com/icloud/setup/

  • How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

    We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi.  How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share?  I want to just click the arrow and "Print" then choose the printer, which doesnt show up.  I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
    Thanks,
    KMQ7

    This would really be the "Holy Grail"   right now.  I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application.  In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment.  For those that would remind me, I am aware of the enhancement link 

  • How can I set up a back up hard drive on airport extreme

    I have an external harddrive that was plugged into my airport extreme. Apple seemed to eliminate my abilty to back up wirelessly in one of the updates. How can I set this up again? Does anyone know a way around this?
    Thanks,

    Ah, I remember those links now.  I was thinking something along the lines of:
    Never consider any computer a data storage device, rather a data creation ,sending, and manipulation device. Anyone who thinks data is safe on any computer, even copied upon multiple partitions is making a mistake.
    Never backup your data exclusively upon magnetic hard drives or flash storage, nor consider same since magnetic storage degrades over time even under ideal conditions.
    Store important data on multiple servers on multiple continents. 
    Burn important data onto multiple copies of archival DVDs and store same in cool dark fireproof safes, multiple places.
    Don’t burn data onto junk DVD’s purchased from consumer level electronics stores. These are not archival long life DVD’s nor reliable, nor trustworthy. Archival DVD blanks such as Taiyo Yuden, rated for 100+ years are what the pros use, these are made by JVC and are professional grade DVD blanks.
    Most people have never heard of archival DVDs, however their cost is only 30% more than junk-level DVD blanks which are only rated for 5-10 years. Also the reject rate on the inferior DVD is around 15%, the cost is almost identical between the WORST DVD blanks and the BEST DVD blanks.
    Most importantly know that 2 copies of your data is 1, and 1 is none, and 1000 copies stored in one place or building, is also the same as none due to possible fire.
    Always consider and expect your computer’s hard drive to completely crash anytime, at all times, and you should keep a cloned and updated hard drive handy at all times to return to immediate productivity and utterly avoid programs and parameter reinstallation.  Nothing is quicker than taking out a dead HD and tossing in a new updated cloned HD for getting back to 100% in under 20 mins!
    Decentralized Omnipresent Data (D.O.D.)
    (something I coined an age ago)
    Backing up data to:
    Multiple HD in multiple locations
    On multiple servers on multiple continents, private and public websites, anonymous data farms. (very easy actually)
    Burned onto archival optical and magnetic storage
    Have unclassified data possessed by multiple people in multiples places.
    When your data becomes both everywhere and nowhere, accessible to all, destructible by none, cannot be collected together or permanently retrieved under any circumstances, you have Decentralized Omnipresent Data (D.O.D.) protection rivaling that of large governments.

  • How to enlarge picture on my hp office jet 6600 all in one printer

    how do i enlarge pictures from my hp office jet 6600 all in one printer

    Hi,
    Are you talking about copy, scan or print ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I set up my USB drive to work on airport

    How do I set up my USB drive to work on airport

    First be sure that your external USB HDD is formatted in either HFS+ or FAT32 as these will be the only two disk formats that the Extreme can share out to network clients.
    Once you verified the format, you just need to connect the HDD to the USB port on the Extreme. Finally you would use the AirPort Utility to enable the HDD for sharing.
    For AirPort Utility v6.x: Start the utility > Select your AirPort Extreme > Select Edit > Select the Disks tab. Verify that the utility correctly identifies your HDD. Then select (check) the "Enable file sharing" option, and then, select Update. After the base station updates, you should be able to "see" the shared HDD in Finder on your MacBook Pro.

  • How do I set my mail folders to keep items saved there indefinitely while only keeping mail in my active mailbox for a specified period of time?

    How do I set my mail folders to keep mail saved there available indefinitely while only keeping active mail in my mailbox for a specified period of time?

    There is no time limit in Firefox 4+ versions for the history.<br />
    Firefox determines automatically how many pages can be kept without affecting the performance.<br />
    You can see the current value via the reads-only pref places.history.expiration.transient_max_pages on the about:config page.
    See:
    * http://blog.bonardo.net/2010/01/20/places-got-async-expiration
    If you lose the history then make sure that you do not use Clear Recent History to clear the browsing history.<br />
    Also make sure that you do not have cleanup software that might clean up files in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Firefox > Preferences > Privacy : History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History

Maybe you are looking for

  • Error while executing UNIX script from BODS - exit code 127

    I am trying to execute a unix script by calling it in BODS job. It is giving an error saying Program terminated with exit code 127. The same script when i am executing in UNIX it is working fine. I am unable to trace the issue.

  • (PDF) Acrobat X's "Save Optimized" Option

    Hi, When using the "Save Optimized" dialog in Adobe Acrobat X, we can see that Acrobat strips out a LOT of stuff from the document to make the size as manageable as possible. But I can't for the life of me find the checkbox corresponding to whatever

  • Unable to start weblogic 7.0 on windows 98

    I am evaluating weblogic server 7.0. When I try to start "startWLS" it is searching for cmd.exe which it never finds. Please help me, I need it as soon as possible..

  • What is Adobe AIR (And why should I develop in it)

    I'm just wonderi ng what Adobe AIR is, and how I could use it in my Flash Development. In the main properties of my flash project I can select which player to run it on, and AIR is available in that list. I haven't tried it yet. But what do I gain ou

  • 2012 Domain Prep fails in root domain

    Hi We are tryiing to introduce 2012 DCs into our root domain. The schema has updated fine but the domain prep fails, both on the 2012 server we are trying to promote and whilst running it direct from the infrastructure server itself. Replication is g