How do i set up a dual boot with windows

I am trying to set up a dual boot system with both the snow leapard and win 7, I have partioned the drive and have windows booting up. How do I get the drivers for the machine that windows will recognize. I am researching this for my dad his I mac is one of the new 21 inch models.

If you want dual boot you would use Boot Camp which is built into Snow Leopard. You will need a license of WIndows 7. You can install it by using Boot Camp Assistant however prior to doing so you probably should look at how it's correctly done, here is a You Tube Boot Camp instructions video I would recommend you watch first.
If your dad wants to run Windows 7 & OS X simultaneously then he will need either Parallels or VMWare Fusion. Both are virtualization applications that allow one to run Windows and OS X side by side. This is a great solution unless he is a gamer or needs to run graphics intensive applications like CAD/CAM or 3D Games or anything that is 3D intensive. For all other types of applications virtualization is an excellent solution.
If you choose the Boot Camp solution there is a forum specifically for that which is where I'd recommend posting questions.
Roger

Similar Messages

How do I set up a dual boot with 10.8 and 10.7

I want to set u a dual boot system using so10.8 and os 10.7 I have my disk for 10.7 and 10.8 is curently my os. I have an empety hard drive partition I want to install 10.7 on to but when I try to start up my computer with the instalation disk it gives me the "this computer needs to restart please push and hold your power button" message. Can any one help?
Thank you
Mike

How to create an OS X Lion installation disc
OS X Lion Install to Different Drive
Your system (OS) selection of where has to be done BEFORE any restart.
And you want to backup and retain a copy of the installer ".ESD" package first.
On restart it will self destruct the package.
A clean install on another drive or another partition.
I prefer to go with pulling the old drive.
Always retain backup boot ability and dual drive dual boot is just... safer.
If you're looking for an OSX installation disc, and, like me, you upgraded to Lion through the app store, you will have to go through a back-door process in order to create this disc. Here's an article on this. http://www.macworld.com/article/161069/2011/07/make_a_bootable_lion_installer.ht ml (I can't guarantee it works. I made a disc like this because I thought I needed it to reload from a Time Machine backup, but it turns out that Lion doesn't require the disc for this, so I never used it.)
When I installed Boot Camp and Windows, I didn't need the OSX installation disc. I'm not sure why you would, in this process. It should only ask for your Windows disc.
If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

[SOLVED] RTC and dual booting with Windows 8/8.1

I am planning ahead of installing Arch on a windows 8.1 laptop, and need to understand whether or not the known Windows registry hack to get windows to use UTC for the RTC is still valid for Windows 8/8.1? I have been searching via google and the usual sources of information, but it is not clear to me if there are problems doing this, specifically if arch is dual booted with Windows 8/8.1 rather than older versions of the MS OS. Certainly I have used the technique without any problem in the past when dual booting Windows XP with Arch on several different machines.
Does anyone have personal experience with doing this on a Windows 8 or 8.1 machine and can report here on whether it works successfully or not?
Thanks for any advice.
Last edited by mcloaked (2014-02-11 21:16:21)

Since there were no replies at this point I thought I would just go ahead and implement the registry hack on the Windows 8.1 O/S in the laptop and see if Windows behaves. It appears to be OK, with the displayed time being correct after reboot, and time synchronisation remaining fine with no problems seen in the displayed time, although I won't be able to read the RTC directly until I have completed the Arch install in the coming week or two. I now don't foresee any issues with the time synchronisation between booting Arch and Windows 8.1 so I will mark this as solved.
Since the RTC is now in UTC then normal clock config in Arch using chrony should perform normally once the install is done and the new system set up.
Last edited by mcloaked (2014-02-11 21:17:11)

Dual Boot with Windows ME

i am very new to all this stuff. Can someone please guide me on how to go about installing Unix so that it also dual boots with windows ME.
i am planning on doing some unix work..and installing oracle and learning oracle in the bargain at home. do u think this is the best way to go. any suggestions/guidance is appreciated.
many many thanks

I'd consider buying a second, inexpensive PC for Solaris. You can get a $20 mechanical switch that will let you share a single monitor. If two keyboards and mice are inconvenient, you can buy a KVM (keyboard-video-mouse) switch. If you just want to hack around, it's much more convenient to have two PCs. (IMHO)

Arch does not show up in Grub when dual booting with windows 8

I just installed Arch linux, dual booting with windows 8 using the beginners guide[https://wiki.archlinux.org/index.php/Beginners'_Guide] itself. Now Grub is installed and i can only find Windows 8 and I cannot find Arch. Is there a way I can find if arch linux has been installed and show up in Grub.
Sorry, I am a newbie, but i chose to post this topic here and not newbie corner as it is installation related.
My windows 8 is installed on /dev/sda1 with ntfs partition type. Arch Linux is installed on /dev/sda6 and it is ext4 partition. I dont know if this info helps. I am using Thinkpad R61
Last edited by sutro_droid (2013-03-06 00:30:48)

ivokosir wrote:It may be that you didn't install os-prober before running grub-mkconfig. This happened to me once, I hope I'm not too late to warn you.
I am sorry, yes you are too late. I have wiped windows 8 and performed clean install. No regrets. And as a matter of fact, I did grub-config and then installed os-prober. That could be the problem. Thanks. I will try this again another time.

Help - How to install Win XP in dual boot with Win 7 (first installed)?

Hi everybody!
I'm having some difficult in install a win xp in dual boot with win 7 (which came with the G550 notebook).
I modified the D: (Lenovo) partition to a primary partition to install the XP. Also I installed the EasyBCD to manange the boots and both S.O. load fine.
The problem is that Win XP is seeing a partition (the first partition on disk) with 200MB that is hidden for Win 7 ! So this partition takes the C: letter in XP and mess all the configuration once that many programs uses the C: as a default letter.
The disk is divided in (aprox):
200 MB hidden partition (from factory)
160GB with Win 7 installed
40GB with Win XP installed
19GB hidden partition (Recovery - from factory)
Is anyone has some idea who to solve this problem or make install XP from the beginning without problems?
Thank a lot!

jay4baps wrote:
Are you sure VMWare Fusion 6 is Launched??? give me link then i download it...
It's version 3.1

When dual-booting with Windows 7, Mac OSX time settings reset every reboot.

I have recently installed Windows 7 Professional on my mid 2010 MacBook Pro via BootCamp (Running Mavericks BTW). Everything runs grean and have not experienced any problems on the Windows side, but I have a problem with Mac OSX now. When I am using Windows 7, and I reboot into Mac OSX, I find that my time settings are wrong. It seems like my time zone has changed, because the date is correct, as well as the minutes, but the hour is always wrong. When I go to Date & Time in System Preferences, and my time zone is correct, but I still have to chage the hour in the time. Any ideas as to why this is happening and how to stop it would be greatly appreciated.

If you dual boot your Windows PC with OS X or Linux, you may have experienced a problem in which your clocks reset themselves incorrectly every time you boot into Windows. Here's a simple registry edit to fix that.
Essentially, the incorrect clock setting happens because OS X and Linux use GMT time while Windows tries to synchronize with your local time zone, getting confused when you reboot between the two. Apple's own Boot Camp drivers for Windows are supposed to fix this problem, though some users have noticed that it still happens even with the drivers installed, and some Linux users are left out in the cold. Furthermore, if you have a Hackintosh, you can't install the Boot Camp drivers, so you'll need to find another way around the problem.
To fix it, just hit Start and type regedit.exe in the search box. Hit Enter and navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. Right click anywhere in the right pane and hit New > DWORD (32-bit) Value. Name it RealTimeIsUniversal, then double click on it and give it a value of 1.
Lastly, reboot into OS X, then reboot back into Windows. You should now notice that your clock actually displays the correct time.

Dual Booting with Windows 8 and 7 Pro in a G6 - 2235us Notebook

I have a G6 - 2235us Notebook 64 bit that came with Windows 8.0 installed.
I would like to install Windows 7 Pro and make it dual book with Windows 8.0 with 7 as the default to start.
Would you please give me steps as to how to proceed and also the drivers, etc I would need to download.
Thank you.
This question was solved.
View Solution.

Thank you Paul. I understad I just have one more question:
I found this page that gives info about dual booting:
http://www.pagestart.com/win8dbwin701181301.html
From your expertise, would you say the steps suggested on that
page could succeed for making Win 8 and 7 dual boot in this particular machine?

HP Envy 700-430qe DT CTO - - - Trying to dual boot with Windows 7

HELP HELP HELP
I know how to set up double boot for several different HP computers, based mostly from what I have learned in this great forum, but this one has me stumped.
I have been trying to install Windows 7 on this computer to double boot with Windows 8.1. I have tried to set the bios up correctly, enabled legacy, disabled secure boot, disabled fast boot. I booted under UEFI to get in to GPT mode, still no luck at all.
The installation always goes all the way through the first 4 steps and through most of the 5th. After the reboot in the 5th step, it stops and can not go any further. A message appears without any error code.
I think it may be a problem in this computers UEIF settings, but I do not know if anymore of them to try.
I can use all the help you all can offer.
Thank, Brad
PS, If we ever get this to work, then I will have to ask you where to find drivers for this model, if they exist!

Hi Brad,
According to the information that you posted you have a W8 delivered PC.
If the graphics card in your PC can run in legacy mode then you should be OK.
I suggest that you use a separate HP for W7 as you will probably run into partition placement issues when you try to install W7 to the same HD. Installation to the same HD is not impossible but you will have to remove some partitions such as the recovery partition and then resize the "C" partition to make room for W7. You should be able to use Disk Management to delete partitions and resize the "C" partition.
Be sure to create the external HP recovery media as it will be needed. Backup your data to separate external media.You should also consider installing the HP diagnostics to an external flash drive.
Boot in the BIOS and set the BIOS to legacy mode and fast boot off. Save the changes on exit.
Now boot up the external recovery media (don't select the EFI media if shown) and reload your PC with W8.
If your PC boots up and runs OK then you should be good to load W7.
If you are using a separate HD for W7 then unplug the original HD. If you don't then W7 will install a boot manager to the primary HD.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Dual booting with windows 7

Long story short, I wanted to try out arch, unfortunately, since I already have my laptop running a gentoo installation that has been months in the making and I doon't want to give that up, and my desktop also needs to run windows so that my parents can use it, I'm forced into a situation in which I need to dual boot and so far, I have been having problems since this is my first time manually setting up a dual boot. I think that I figured it out, but I wanted to make sure.
So, windows sets up an MBR partition right? Do I just mnt this to /mnt/boot and then continue to set up everything as if I was just installing arch regularly?

I decided to just start from scratch. So right now win is installing. My current partition scheme is:
/dev/sda1 primary 250mb fs: ext2 (boot)
/dev/sda2 primary 30gb fs: NTFS (Windows)
/dev/sda3 primary 500gb fs: ext4 (Arch)
/dev/sda4 primary 500gb fs: ext4 (Later usage maybe trying out LFS)
I just decided to make it simple and it also allows me extra space for whatever I decide to do later with all that space that I'll never use.
When I originally posted this, I already was dual booting windows and xubuntu, my plan was just to wipe xub since mostly everything else would be pretty much the same grub-wise. The scheme was:
/dev/sda1 primary 100mb fs: NTFS (MBR)
/dev/sda2 primary 250gb fs:NTFS (Windows)
/dev/sda3 primary 30gb fs: ext4 (root)
/dev/sda5 logical 250mb fs: ext2 (boot)
/dev/sda6 logical rest-of-drive fs: ext4 (home)

Dual Booting With Windows 8?

So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub. I've already wiped everything and reinstalled Windows 8 first, however I'm a bit confused as to how to properly setup a UEFI partition. Period. Are there any good guides on how to do this? The Dual Boot article on the wiki, unfortunately, wasn't very helpful in my case.
While I have the latest snapshot already on USB, it doesn't boot properly, not allowing access to /dev/tty (i.e., I can't do anything). Also, I unfortunately can't use GParted Live since none of my DVDs are rewriteable; they've already been used up over the years. So, if anyone has any suggestions on how best I can approach this (or good resources which are to the point; i.e., not too much details to wade through), it would definitely be appreciated.
Thanks.

holland01 wrote:
So, I found this guide: http://www.neuraladvance.com/2012/11/17 … -uefi-lvm/. While I've ran and used Arch before a few times, it's been a while.
The problem is that the guide decides to use the Windows 8 partition itself to install Arch; what I would like to do is use my own partition for Arch, making it as independent as possible from Win8, and both booted with Grub.
By "the Windows 8 partition," it appears that you're referring to the EFI System Partition (ESP) that Windows created -- /dev/sda1 in the referenced guide. I've only skimmed the article, but I didn't notice any reference to using any actual Windows partitions in it. Note that the ESP doesn't really "belong" to any one OS; it definitely is not a Windows partition. It is, as its name suggests, a partition that "belongs" to the EFI. It's meant to be shared across OSes.
That said, if you really want to, you can create multiple ESPs. This is legal according to the EFI spec. Unfortunately, it can cause problems, since the Windows 7 installer gets very confused if it sees multiple ESPs and an installation of Windows 7 will fail. I don't know if Windows 8 has the same problem, but if it does, and if you find that you need to re-install Windows, having multiple ESPs will complicate matters. Thus, I generally recommend sticking with one ESP per disk if at all possible. Be sure to keep it backed up in case some ill-behaved program trashes it, though.

How to dual boot with Windows 8.1 and Arch?

Hello everyone,
I've been looking into using Linux as my daily driver since having some experience with it on a server. After some digging around, I think Arch Linux is the best distro for me, now onto where I am.
I'm currently running Windows 8.1 (updated from Windows 8, which updated from Windows 7) on a Dell Inspiron 15R SE laptop, I want to dual boot Arch Linux with it. I've looked at the wiki and I'm still not entirely sure what to do.
Can anyone give me a quick list of steps of what to do to dual boot this? I've dual booted Ubuntu in the past and it was really simple because an installer did it all.
Thanks, Expi.

stqn wrote:
Expi1 wrote:Thanks, I'm mostly struggling with how to partition for Arch and then how to do the bootloader. I'm using Win8 64-bit and from what I understand a Legacy BIOS bootloader. I'm not entirely sure what I should be partitioning the C: into, I've done partitions before, just not for Arch and then I'm not sure whether to use GRUB or syslinux, or if I even need those. Or if I need to use GPT or MBR?
Your disk is already partitionned so you don’t have to choose between GPT or MBR, the choice is already made.
You don’t partition “C:”, that is the name of a Windows partition. You partition a drive.
Grub or syslinux, use whatever the beginners guide tells you to. Personally I think syslinux is simpler which is why I’m using it (but I’m not dual-booting, if that matters).
You’re not saying what your problem is with partitionning, so it’s hard to help.
Thanks for getting back to me, I'm not sure if I just create one large partition for Archlinux or if I have to create multiple? Where I'm also confused is with the Creating Filesystems part of the guide. I don't understand how I'd do this in Windows, or what /dev/sda1 is referring to.
As for the bootloader part, the Beginner's Guide gives you a choice between syslinux and grub, what I'm not sure about is which to use considering I'm dualbooting. How it will affect my windows bootloader, do I disregard that and use GRUB now? I'm unclear on how that works.
I'm also aware I need to disable Secure Boot, I just searched my BIOS options and couldn't find anything remotely relating to that, so I'm assuming it's not an issue since this computer was originally on Windows 7 anyway?
Thanks again, Expi.
Last edited by Expi1 (2014-03-06 19:54:30)

Dual Boot with Windows Vista

Hi
I am a complete n00b with Mac. The director at my company requested me to set up her MacBook (running Mac OSX 10.4.11) to dualboot with Windows Vista 32 bit. I have been searching Google and I cannot find anything.
Can someone please run me through what I'll need and how exactly to do it?
Thank you in advance

Hi and Welcome to Apple Discussions...
Check out the BootCamp set up guide before installing Windows on a Mac.
http://manuals.info.apple.com/en/bootcampinstall-setup.pdf
As Kurt mentions... you must be running Leopard 10.5.x to do this.
And more information here. http://lifehacker.com/software/geek-to-live/virtualize-and-dual+boot-the-same-wi ndows-on-your-mac-267905.php
Carolyn

Dual boot with Windows 7 and LINUX - Tecra A11 (PTSE1A-00L005)

Hi,
I bought a new Tecra A11 Laptop which runs WIN7 Pro. I want to install LINUX also. That means, I want to run my laptop in dual boot Win7 Pro/LINUX (any distributor). Please tell me how to do that.
There are 5 partitions on the HDD:
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
Hey, I need it badly, because I have admitted to a course of RHCE (Red Hat Certified Engineer)
Please help me

Hi
I may not be able to give You a step-by-step explanation but most distros today offer a possibility to co-exist with Windows.
During the installation the unused free space will be taken by Linux (with the consent of the user of course!!)
What exact setup is needed by You is impossible for anyone else to say, but I would suggest to make the space occupied by the F drive available for Linux.
You seem to have space enough for Windows and the Linux OS does not need much.
Some thoughts concerning your partition setup:
I would NOT touch 1,2 and 5 no matter what. They are your system and some system internal partitions (recovery environment and data) and would not be fun to lose.
1. Active, Recovery partiton 1.46 Gb (no drive letter)
2. Active Primary C: Boot 145.04 Gb (NTFS)
3. Active Logical E: 78.13 Gb (NTFS)
4. Active Logical F: 64.25 Gb (NTFS)
5. Primary Partition 9.2 Gb (no drive letter, application unknown)
So pick a Distro (my suggestion Ubuntu, Mint, Fedora, OpenSuse - Fedora will be the one closest related to RedHat) which will guide You through the steps to allocate space for Linux.
I would suggest however to remove the drive F in Windows so Linux does not start resizing all partitions.
I am sure that will work fine, but will just take time and the pretty unnecessary F drive will most surely be kept.
If You already have valuable data on your unit, make sure to back it up!! No software comes with warranties :)
Last but not least - make 100% sure to create a recovery set with the help of Toshiba Recovery media creator BEFORE you start installing Linux.
If something goes wrong You might want to have the possibility to put the unit back into factory state.
Good luck and keep asking if You need additional help!
Tom

Simple UEFI GPT Dual boot with windows 8 boot partition question.

Hi everyone,
I think it's obvious from the quuestion that I'm a newbie here (and from the location of the post) but I have read (several times):
https://wiki.archlinux.org/index.php/UEFI
https://wiki.archlinux.org/index.php/UEFI_Bootloaders
and the incredibly helpful:
https://wiki.archlinux.org/index.php/Beginner%27s_Guide
along with many forum posts. unfortunately this:
https://wiki.archlinux.org/index.php/Wi … _Dual_Boot
appears out of date and so I need to ask you fine people my question.
If I want to dual boot Arch with my Windows 8 my question is on the boot partition. I have an existing windows EFI boot partition. should I mount this partition to my "/mnt/boot/efi" folder and then copy the files to this partition when I am setting up rEFInd (my chosen bootloader from wiki page, comments/suggestions are welcome) or should I setup a separate boot partition for my arch installation. I assume from reading about rEFInd that the former is how I should do it as this seems to be how refind would be able to "see" my windows bootloader.
The reason I am double checking and asking here is I know that windows can be a temperamental beast and is very prone to not booting so I don't want to mess with the windows boot partition unduly.
Thanks in advance guys, looking forward to getting my arch working!
Last edited by crashandburn4 (2013-03-03 13:42:43)

$esp = EFI System Partition?
also, ok, gummiboot, I'm glad I can mount the esp as /boot (that was my original thought but reread the tutorial and wasn't sure) just double checking, it is the esp created by windows 8 that I mount?
in addition, as I am slightly new to this is there any tutorial that can tell me how to set up gummiboot? I've looked here:
http://freedesktop.org/wiki/Software/gummiboot
but don't see anything in the way of detailed instructions.
from your post: https://bbs.archlinux.org/viewtopic.php?id=159061
I'm gonna guess it's something like this (please let me know if this is right)
/mount $ESP /mnt/boot
pacman -S gummiboot
(after chrooting)
//exit chroot
gummiboot
*stuff saying gummiboot is not configured*
gummiboot install
is it something like that? can anyone point me towards a manual
Last edited by crashandburn4 (2013-03-03 14:58:53)

How do i set up a dual boot with windows

Similar Messages

Maybe you are looking for