How do i set up a link on my website to download calendar events
I am trying to put a link on our website that downloads calendar events. We have a training course that runs 13 weeks and each week the days are not always the same. I would like to have the ability for them to download the appointments into their calendar with one click.
Sorry you don't not a feature on the iphone. ONly signature for emails.
You can give Apple a feedback here http://www.apple.com/feedback/
Similar Messages
-
How to I set an internal link in a PDF document using Preview? After setting a link under the Tools/Annotations menu, the link doesn't work and no detailed instructions are provided via the Help menu other than it showing the pull-down menu selection to make.
No. I am able to use the other features such as underlining, highlighting, adding rectangles and oval and save those changes.
-
How to find the number of links in a website
hi every body
can any one clear my doubt
my doubt is that
in a website how to find the number of links the hole website contains
is there any navigation tool to find that
plz help me yar
i am waiting for the replyIf you're talking about commercial sites (sites you don't have the source code for) I'm not sure.
If you want to count the links in site that you have the source code for, it should be relatively easy to write a Java application to do it. All you really need to do is have a list of the files you want to count links in, read each file line by line and check for the existance of the <a> tag in each line. Anywhere their is an <a> tag there is a link.
Hope this helps. -
How can I change an embedded link to a website in a pdf in Pro XI
How can I change an embedded link to a website in a pdf in Pro XI for Mac?
Hi leee4227078,
Please refer this blog post as this could help you on how to remove embedded hyperlinks:
Removing Hyperlinks from a PDF and Feature/Gotcha
Let me know.
Regards,
Anubha -
How can I change an embedded link to a website in a pdf
How can I change an embedded link to a website in a pdf in Pro XI for Mac?
You can use the Select Object tool to select the link object and then right-click it and edit it via Properties.
-
My calendar on my iPhone 4 erases all data over a month old except for recurring events. How Do I get it to keep the info and not erase calendar events?
Settings>Mail, Contacts, Calendars>Calendars>Sync>All Events.
Note: If you're using a work Exchange account, the administrator my have restricted your options for this setting. -
How do I set a 2nd Links Style using CSS
This might be a very simple question to everyone else, but I
am a very simple novice!
I have set up the link style for my webpage (see below), but
I want to add some different links in a different style on the
page.
a:link {
color: #3CCCFF;
text-decoration: none;
a:visited {
color: #3CCCFF;
text-decoration: none;
a:hover {
color: #FF339A;
text-decoration: underline;
a:active {
color: #0099FF;
text-decoration: none;
I have set up a different text style (below) and would like
to create link styles off of this (ie. same size and weight) but
with different Link, Hover, Active, Visited styles.
h3 {
font-family: Verdana, Arial, Helvetica, sans-serif;
font-weight: lighter;
font-size: 9px;
color: #ACACAC;
line-height: 18px;
margin: 0px 0px 0px 5px;
Can this be done? If so, how do I add it to the CSS and the
HTML document?
Hope this makes sense and that someone can point me in the
right direction,
Thanks
WebboThese should help:
http://thepattysite.com/linkstyles1.cfm
and
http://mako4css.com/BasLink.htm
Hope this helps
Jo
"Webbo agogo" <[email protected]> wrote in
message
news:e4eogg$d71$[email protected]..
> This might be a very simple question to everyone else,
but I am a very
> simple
> novice!
>
> I have set up the link style for my webpage (see below),
but I want to add
> some different links in a different style on the page.
>
> a:link {
> color: #3CCCFF;
> text-decoration: none;
> }
> a:visited {
> color: #3CCCFF;
> text-decoration: none;
> }
> a:hover {
> color: #FF339A;
> text-decoration: underline;
> }
> a:active {
> color: #0099FF;
> text-decoration: none;
> }
>
> I have set up a different text style (below) and would
like to create link
> styles off of this (ie. same size and weight) but with
different Link,
> Hover,
> Active, Visited styles.
>
> h3 {
> font-family: Verdana, Arial, Helvetica, sans-serif;
> font-weight: lighter;
> font-size: 9px;
> color: #ACACAC;
> line-height: 18px;
> margin: 0px 0px 0px 5px;
> }
>
> Can this be done? If so, how do I add it to the CSS and
the HTML document?
>
>
> Hope this makes sense and that someone can point me in
the right
> direction,
> Thanks
>
> Webbo
> -
I want to set a different folder from the My Documents/Downloads folder for Firefox to put everything I download, like I used to have it. I recently rebuilt my computer and reinstalled everything from WinXP to security software to Firefox, and I cannot find any options anywhere to set a different folder like I used to have it... with the same software, other than it being a newer iteration of Ff. So tell me, am I losing my mind so bad that I just can't remember how I did it before, or have things changed so much that what I want is no longer possible? Please, someone tell me how to set it to do what I want, I can't stand to have what I do on my computer dictated by programmers who only think that they know what people want. If that sounds a little angry, I apologize with the disclaimer that I suffer from Post Traumatic Stress Disorder and therefore cannot handle frustration... and this kind of thing frustrates me to the point of rage.
Tools > Options - General tab = Downloads
Set your preferences there. -
How do I set a limit to the number of registrants to an event form?
How do I set a limit to the number of registrants filling out an event form?
PLEASE add this feature. as far as I can tell there are no option out there that serve this need. FormAssembly, EmailMeForm, or FormsCentral. Think of how many customers would use this. Imagine a t-shirt company that pre-prints inventory, wouldn't they want to limit how many forms could be submitted that want a size L shirt? My business is participant based, like the evnt question above we need to limit the number of participants. Of course I could program my own solution, but then I would miss out on all the other cool FormsCentral features. Any chance this could be added right away if I sponsored it as a custom development?
-
How can I set a right link Aggregations?
I have a Enterprise T5220 server, running Solaris 10 that I am using as a backup server. On this server, I have a Layer 4, LACP-enabled link aggregation set up using two of the server's Gigabit NICs (e1000g2 and e1000g3) and until recently I was getting up to and sometimes over 1.5 Gb/s as desired. However, something has happened recently to where I can now barely get over 1 Gb/s. As far as I know, no patches were applied to the server and no changes were made to the switch that it's connected to (Nortel Passport 8600 Series) and the total amount of backup data sent to the server has stayed fairly constant. I have tried setting up the aggregation multiple times and in multiple ways to no avail. (LACP enabled/disabled, different policies, etc.) I've also tried using different ports on the server and switch to rule out any faulty port problems. Our networking guys assure me that the aggregation is set up correctly on the switch side but I can get more details if needed.
In order to attempt to better troubleshoot the problem, I run one of several network speed tools (nttcp, nepim, & iperf) as the "server" on the T5220, and I set up a spare X2100 as a "client". Both the server and client are connected to the same switch. The first set of tests with all three tools yields roughly 600 Mb/s. This seems a bit low to me, I seem to remember getting 700+ Mb/s prior to this "issue". When I run a second set of tests from two separate "client" X2100 servers, coming in on two different Gig ports on the T5220, each port also does ~600 Mb/s. I have also tried using crossover cables and I only get maybe a 50-75 Mb/s increase. After Googling Solaris network optimizations, I found that if I double tcp_max_buf to 2097152, and set tcp_xmit_hiwat & tcp_recv_hiwat to 524288, it bumps up the speed of a single Gig port to ~920 Mb/s. That's more like it!
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!
Regards,
sundy
Output of several commands on the T5220:
uname -a:
SunOS oitbus1 5.10 Generic_137111-07 sun4v sparc SUNW,SPARC-Enterprise-T5220
ifconfig -a (IP and broadcast hidden for security):
lo0: flags=2001000849 mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
aggr1: flags=1000843 mtu 1500 index 2
inet x.x.x.x netmask ffffff00 broadcast x.x.x.x
ether 0:14:4f:ec:bc:1e
dladm show-dev:
e1000g0 link: unknown speed: 0 Mbps duplex: half
e1000g1 link: unknown speed: 0 Mbps duplex: half
e1000g2 link: up speed: 1000 Mbps duplex: full
e1000g3 link: up speed: 1000 Mbps duplex: full
dladm show-link:
e1000g0 type: non-vlan mtu: 1500 device: e1000g0
e1000g1 type: non-vlan mtu: 1500 device: e1000g1
e1000g2 type: non-vlan mtu: 1500 device: e1000g2
e1000g3 type: non-vlan mtu: 1500 device: e1000g3
aggr1 type: non-vlan mtu: 1500 aggregation: key 1
dladm show-aggr:
key: 1 (0x0001) policy: L4 address: 0:14:4f:ec:bc:1e (auto) device address speed
duplex link state
e1000g2 0:14:4f:ec:bc:1e 1000 Mbps full up attached
e1000g3 1000 Mbps full up attached
dladm show-aggr -L:
key: 1 (0x0001) policy: L4 address: 0:14:4f:ec:bc:1e (auto) LACP mode: active LACP timer: short
device activity timeout aggregatable sync coll dist defaulted expired
e1000g2 active short yes yes yes yes no no
e1000g3 active short yes yes yes yes no no
dladm show-aggr -s:
key: 1 ipackets rbytes opackets obytes %ipkts %opkts
Total 464982722061215050501612388529872161440848661
e1000g2 30677028844072327428231142100939796617960694 66.0 59.5
e1000g3 15821243372049177622000967520476 64822888149 34.0 40.5sundy.liu wrote:
Unfortunately however, even with the TCP tweaks enabled, I still only get a little over 1 Gb/s through the two aggregated Gig ports. It seems as though the aggregation is only using one port, though MRTG graphs of the two switch ports do in fact show that they are both being utilized equally, essentially splitting the 1 Gb/s speed between
the two ports.
Problem with the server? switch? Aggregation software? All the above? At any rate, I seem to be missing something.. Any help regarding this issue would be greatly appreciated!If you're only running a single stream, that's all you'll see. Teaming/aggregating doesn't make one stream go faster.
If you ran two streams simultaneously, then you should see a difference between a single 1G interface and an aggregate of two 1G interfaces.
Darren -
How can I set a button/link that is visible on all slides?
I want to add a button/link that is automatically visible on all slides (whole project). But it seems it does not work. Any help?
Hello,
It depends on your version. I hope you are on CP6 or later. In that case you have two possiblities:
a shape button on the main master slide (and be sure that all daughter master slides have the objects of the main master slide)
a shape button on the first slide, timed for the rest of the project.
More details: Why I like Shape Buttons - Captivate 6! - Captivate blog
There is also a webinar on demand from Adobe 'Lilybiri's favourite...'
Lilybiri -
How do I set up a .htaccess for my website?
I have posted similar topics before, but now I am ready to set up a .htaccess...finally... Anyways I have Geocities Hosting, with no FTP. I have a subdirectory set up and a HTML file in there. I want to password protect that page with probably a few usernames and passwords. It will need to be secure. The web address will be something like http://xxx.xx.com/xxx/xx.html So if anyone could offer step-by step instructions on how I can get this page protected.
Thanks, Internet Wiz™Thanks for the reply, but the first website you gave
me, linked to a page with about 6 lines of text.
doesn't appear problematic on safari or camino. strange.
the Apache guide, is for setting up an Apache
webserver.
typically, when you say you want to setup .htaccess, it is for apache. thus, the reason for the apache link.
I don't know if Geocities runs on Apache
and I don't have Access permissions to change any of
their confg and things. What I really need is
directions on how to password protect my webpage that
is on a Geocities server.
10-4. you typically don't need to change anything in their config if they do run apache. assuming they are (which they may not be) you just put the .htaccess file that you create in the directory you want to protect and place the passwd file somewhere outside of the web-accessible area (e.g. outside the web 'root' for your account).
that being said, another google gives some info. on geocities:
http://help.yahoo.com/help/us/geo/pwdprotect/index.html
-b -
How can i set up my ipad to be able to download apps that i purchase on any of my computers
I have a MacBook Pro and a tower at home. I want to be able to purchase/download apps on either device and then upload them to my iPad. When I try to download to my MacBook Pro I get a message saying that all apps/databases will be removed and replaced by the ones currently on the MacBook Pro. How can I sync them all?
Thanks.
Russ
Altadena, CAThere is Settings > General > Restrictions > Require Password which you can set to '15 minutes' - the only other option for the setting is 'Immediately', you won't be able to have it as 2 or 3 minutes.
-
How do I set up a form that allows a pdf download in return after filling the form in
I have a white paper that I want to offer to clients if they fill in their details in a form - how do I do this? Thanks in advance
Boy, I wish someone would answer this question. I am trying to do the same thing.
-
iTunes was eating up all my hard drive, so I bought an external hard drive
Question 1:
After I move the iTunes file over to the external hard drive, do I just move the file on my lap top to the trash folder and will that free up space on my hard drive?
Question 2:
If question 1 is good, the next time I down load a movie or song is there anything I need to do to get it to download to the iTunes folder on my external hard drive?http://support.apple.com/kb/ht1449
This article will help you.
1. Yes, you can trash the original folder. If you have a large media library, then yes you should free up a good chunk of space. However, you must also empty the trash. You can't just leave it in the trash or it will take up space.
2. Once you select the new media folder in iTunes as the article tells you, I believe all new downloaded media will automatically go to that new folder.
Maybe you are looking for
-
Importing music from the Hard drive to Itunes
I am pretty new to both IPOD and ITUNES, and am beginning to think I am a bit slow as well. Anyway, I had quite a number of cuts on my hard drive, but have lately copied new files/songs into sub-folder of My Music, and I am not seeing them move into
-
Ksld not breaking into source file
Hi guys, I installed ksld and started debugging my driver using a tip connection... all works fine.. i inserted a breakpoint on one of my functions in the driver.. and in the tip console once i have reached the breakpoint.. i use ::remote to enter re
-
Enable multiple PO numberranges to support SRM Classic implementation.
Hi Experts, We have implemented SRM 7.0 Classic Implimentation. We currently have one PO number range which is assigned to one PO document type to support North America and Canada region. We are planning to go for roll-out for Latin America, Europe a
-
GetCharIndexAtPoint() equivalent in Spark RichEditableText
I want to find a way to get the character index in a Spark based RichEditableText based on mouse x, y position. The mx.controls.TextArea has a protected getCharIndexAtPoint() method but I can't find an equivalent of this in the Spark RichEditableT
-
How to remove Wallpaper showing behind apps?
Hi Just updated to OS 4 and the wallpaper now shows up behind the apps continually. Any ideas how to get rid of and get back to a plain black background? Thanks for any help....