How do I set up a lock code for my Nokia C2-02?

Hi, I have a used Nokia C2-02 phone from a seller on eBay.
I wish to protect my privacy so that other people cannot access my texts, etc.
When I go to 'settings', 'security', and click on 'access codes', in order to set up a lock code,  the display says'change security code'.
When I ckick on it, I get a request for my security code.
Twice now I have keyed in'12345', which I take to be the default code.
Each time I get an error message and the second time it said that I have only one more chance to key in the correct code.
Perhaps the previous owner had a code, which I take to be the same as a security keyguard code.
When I go to 'device' in 'settings', it says that the security keyguard is off.
I can switch it on, but to activate it I again need to key in a code.
Am I corect in thinking that either someone has alrerady set up a code or the default code is not '12345'?
Also, What can I do to set up my own code?
Fianally, What if I use a pin code? Will that protect my privacy?
Do I have to get in touch with my network provider ( Tesco Mobile) in order to set it up?
I'd appreciate any help anyone can give,
Laurence
Solved!
Go to Solution.

If I used a  pin code instead, would it protect my privacy?
would it stop those without the code reading my texts and so on?
PIN Code is basically for the SIM card and not the phone. Talking of privacy, your phone will be fully explorable if the SIM card is removed, so PIN scenario is pretty wasteful. Majority of the phones only ask for the PIN code when the phone is started and register the SIM to the network only wen PIN is furnished.
If It does not work I could find that I have locked the phone, which could necessitate sending it to the Nokia Care centre.
This is where the online free service may come in. It claims that it can find the security mastercode for any individual phone, based on the IMEI number, which you access by keying in asterisk, hash, 06, hash, or by taking the back off the phone and looking inside.
Armed with the 10-digit mastercode you key it in and it unlocks the phone.
That, at least, is the claim, but on another mastercode site there's a warning that the mastercode works only for older models.
I have my mastercode, but I don't know whether to take the chance.
Does anyone have any views on this?.
, Cheers, Laurence
Unfortunately, these type of Master Codes do not work. If ever they worked, the phones would become too easy to break in. As far as I can remember, I have not seen any person with a claim that one of those Master Codes worked for them. Maybe they worked for very very old 1st gen devices from Nokia, but not anymore. The security code is based on what user enters in the settings and there doesn't exist any master code to over-ride that. If it would, Nokia Care should be making use of that instead refurbishing/flashing the phones in every case that called for Keyguard Code.

Similar Messages

  • How do I set the response status code for a request in ADF?

    For example:
    I have a page accessible like page.jspx?id=$ID, in which $ID identifies an object stored in a database. The user navigates to page.jspx?id=abc. abc does not exist or has been deleted. I wish to set the response status code to 404 for the page request, like, for instance, https://docs.google.com/spreadsheet/ccc?key=abc does. How do I do this?
    PS: Changing the status code for subsequent partial submits on the page if the object is deleted while the user is on the page (e.g. if the user attempts to delete an already deleted object through a "Delete" button on the page) may also be desirable, but would probably not fit in as well with the ADF lifecycle or be as useful.

    Maybe I should be more specific about the current state of the code. It's something functionally similar in relevant portions to the following. For the purposes of this code, assume the ID maps only to a name, rather than a more complicated object:
    page.jspx looks like:
    <?xml version='1.0' encoding='utf-8'?>
    <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page"
         xmlns:f="http://java.sun.com/jsf/core"
         xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
         xmlns:trh="http://myfaces.apache.org/trinidad/html" version="1.2">
         <jsp:directive.page contentType="text/html;charset=utf-8" />
         <f:view>
              <af:document binding="#{pageInitializer.dummyComponent}" title="#{pageData.name != null ? pageData.name : 'Object Not Found'}">
                   <af:outputText rendered="#{pageData.name != null}" value="#{pageData.name}" />
                   <af:outputText rendered="#{pageData.name == null}" value="No object was found at this URL." />
              </af:document>
         </f:view>
    </jsp:root>pageInitializer and pageData are pageFlow-scoped beans with the following code:
    class PageInitializer {
         @Inject private PageData pageData;
         @Inject private NameDao nameDao;
         @PostConstruct
         void initialize() {
              String name = nameDao.getNameById(FacesContext.getCurrentInstance().getExternalContext().getRequestParameterMap().get("id"));
              if (name != null)
                   pageData.setName(name);
              else
                   // TODO: Set status code 404
         public void setDummyComponent(UIComponent dummyComponent) {
         public UIComponent getDummyComponent() {
              return null;
    public class PageData {
         private String name;
         public String getName() {
              return name;
         public void setName(String name) {
              this.name = name;
    }The code initializes the data from the database through the initilaizer of a pageFlow-scoped bean with a dummy setter for the document because I read somewhere that that would work, and it seems to work, even though it seems hacky.
    Ideally, the code would render the 404 where it currently says (// TODO: Set status code 404). I realize this may not even be possible given the current architecture, because part of the response body has already been rendered, and I believe, but cannot find a source to cite, that the status code and headers cannot be set after the body has started being rendered. Is there any architecture that would get me this page's functionality (even if it's two JSPXs on the backend (which might be ideal)) and be able to render a 404 for an inexistent object?
    Edited by: 907794 on Feb 1, 2012 3:55 PM
    Edited by: 907794 on Feb 1, 2012 3:58 PM

  • How can i set a global error page for all error cod

    how can i set a global error page for all error code?
    i don't want to leave a long list in the web.xml file.could any one help me?
    thanks

    If u have a common Error JSP named as ErrorPage.jsp
    You need to have the following piece of code in the JSP as :
    <%@ page isErrorPage ="true"%>
    This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
    Thanks and regards,
    Pazhanikanthan. P

  • How do I set a customized lock screen in iOS7?

    How do I set a customized lock screen in iOS7?

    Thank you, but I need to put my name and contact info on an image to be the lock screen.  It is what my university really really wants us to do.  I used to be able to make a PowerPoint or Keynote page, save it as a jpeg, email it to myself and open it on the iPad, send it to cameral roll, then have the option to set it as the lock screen there.  Can't do that any more.

  • Set a second screen lock code for parents

    Can I set a second lock code to use on the lock screen to access my childs phone?

    There isn't a way to do that. With the phones that have Touch ID you could add a second fingerprint which would allow access (except that a passcode is still required when restarting).

  • HT2731 How do I set up an Apple ID for a child with gift card credit

    How do I set up an Apple ID for a chld with a gift card credit, without credit card details and without using my own account?

    Go to the main iTunes Store page (within iTunes),  click on the "Redeem" link on the right side of the page, click "Create Apple ID", and enter in the code from your card when requested. You should be able to create an iTunes Store account for your child without needing a credit card. You'll just need an email address for him/her to create the ID, though it can be a "temporary" one that you don't intend to really be used. You can change the email address to which receipts are sent to an account you really wish to use.
    Regards.
    Message was edited by: varjak paw

  • HT1414 My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to all upon and need the r

    My iPhone has crashed during a sync and now I can't restore from backup as it is asking for password to load the backup yet neither the lock code for the phone or my iTunes Password are working... I have no other password to call upon and need the restore to retrieve info onto my phone, I am a real novice to this...... please help, !!!!

    If anyone else is looking for a solution to this same problem, I was able to get it working looking through several older discussions.
    The solution was to use the password that I had on my iTunes account the very first time I set up the iPhone about a year ago.  I changed my iTunes password about 10 months ago;  but apparently, the backups continue to use the password that existed when the phone was first set up.
    A couple of troubling things with this are that 1) I didn't apply a password when I did the backup this afternoon so I don't understand why it was required when I did the restore a few hours later. and 2) it makes zero sense why iTunes would not be smart enough to use the current accout password when requiring the password to restore from a backup made with no password. 
    I thought iTunes and Apple were smarter than that.  With so many posts stating exactly the same problem, it is clear that this is bug in the software. 
    Best,
    Craig

  • How do I set the default print margins for ALL printers in mozilla.cfg

    How do I set the default print margins for ALL printers in mozilla.cfg, even ones that are not yet installed / connected to the computer?
    I'm trying to install firefox with MDT and apply certain print options, but the printers themselves are connected at a later stage so the print.printer_myprinterhere cannot be used.

    Best answer I could find: [https://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/#comment-132668]
    If you can figure out how to add the printer name, this can be used to lock the margins.

  • Does the lock code for my iPad covered by my warranty?

    Does the lock code for my iPad covered by my warranty?

    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Lock code for 6220c

    i forgot my lock code for 6220c? how can i unlock it? oh, please help...

    If you haven't changed then its 12345 by default. If you have done so then you will have to go to nokia care point. They will do it for you, but may charge you for that. Also take purchase proof along with you.
    Please thank me by giving 'KUDOS' star. It will help me to serve you better.
    Currently using N82 and 5230. Next would be N?

  • How do I set up a seperate account for my wife?

    We finally purchased a nice new iPhone for my wife. But she would like her own iTunes account. How do I set up a seperate account for her? She has her own laptop, with an iTunes account on it that I was using. Should I just un-install that iTunes package and have her download a new version? I'd rather have two versions so I don't lose the music on that old iTunes account. It's not huge, but would be a PITA.

    Apple ID
    Go to iTunes > Store > Sign Out (your apple id) and sign your wife apple id in.

  • How do I set Firefox to be usable for all users on one computer?

    How do I set Firefox to be usable for all users on one computer?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • How can i set up multiple user accounts for my new ipad mini?

    How can i set up multiple user accounts for my new ipad mini?

    The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

  • How do I set the default welcome page for PUBLIC user

    gurus,
    i'm using -
    Oracle 9i Database
    Oracle 9ias Portal Release 2
    QUESTION => how do I set the default welcome page for the PUBLIC user.
    i did the following to achieve this -
    1. logged into portal
    2. clicked on builder
    3. clicked on administer tab
    4. selected PUBLIC user in the Portal User Profile portlet
    5. went to the preferences tab
    6. in the default home page selected a custom page group
    7. logged out of portal
    8. open a new browsere session
    9. type the portal URL and i get the login page ....??
    i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
    the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
    Partner Application Name Logout Status [Logout Status]
    Oracle Portal (portal) logout status
    The SSO Server (orasso) checkmark
    buzz.resva.trw.com:7778 checkmark
    infrastructure.happy.resva.trw.com checkmark
    portal1.buzz.resva.trw.com checkmark
    portal2.sylvester.resva.trw.com checkmark
    sylvester.resva.trw.com:7778 checkmark
    so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
    ideas anyone ....?
    thanx a bunch.
    hero

    Hi,
    The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
    Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
    Hope it clarifies the things.
    Regards,
    Ved

Maybe you are looking for