How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks
How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks
You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.
Similar Messages
-
Hi,
ever since my upgrade to OS X Lion, I've noticed that the usage of the SMTP server list in Mail 5 seems to have changed. In the past, said list contained ALL configured SMTP servers. When configuring e-mail accounts (e.g. MobileMe) you could specify a default SMTP server from the server list and check a checkbox to ONLY use the specified server for outgoing mail of an account.
In Lion the meaning of this server list seems to have changed and I think I have discovered a bug that prevents me from using only a specific SMTP server with an account.
For accounts that are supported by Lion and listed under the "Mail, Contacts & Calendars" Preference Pane, Mail 5 seems to always use a default server setting for outgoing mail. For GMail, this default server seems to use SSL. However, for MobileMe the default server is not the service's SSL SMTP server.
Sending mail on non-SSL ports is a problem for me for two reasons:
1.) Obviously this a security/privacy issue.
2.) I'm a student and when logged into my universities network I can't send e-mail on default e-mail ports (25). Our servers block any outgoing e-mail on ports other than SSL/TLS ports.
So far this shouldn't be a problem, because you should be able to overwrite Mail's default server by configuring another MobileMe SMTP server with SSL in the server list and checking the checkbox depicted in the below screenshot.
Unfortunately, whenever I select the SSL enabled MobileMe SMTP server, activate the checkbox and save my changes, Mail will revert to the the default SMTP server without SSL immediately. If I delete the default server from the server list, it pops up again after saving the changes. There seem to be just two ways of sending e-mail using a different server than the default one:
1. Don't check the checkbox and specify the SMTP server for each e-mail you want to send.
2. Send using the default server. If sending the mail fails (because I am in my university's network), select the SSL SMTP server in the trouble-shooting popup.
Option one is annoying. Option two still bears the security/privacy problem and is annoying, because it takes ages for Mail to accept that a server does not seem to work.
There seems to be no way of fixing this behavior and I have it on both iMac and my Macbook Air. Is this a bug? Do you have any suggestions for a fix?
Thanks a lot,
FelixFelix,
I agree, I think it is a bug. My wife is experiencing the exact same issue on her MacBook after upgrading to Lion.
I submitted Mail feedback tonight to Apple. I hope they get this fixed pronto. My wife prefers Mail to the web interface or using her iPhone for mail. Thanks for explaining the issue. -
Mail synchro and smtp server problems
I have a permanent problem with using my MB Pro and email client. Instead of icloud email im using some other email adresses and its appear everytime when i come back home (using wifi connection) problems with Mail program. Sometimes appears in a folder to send sent email from two hours before. sometimes the whole program switch all accounts offline and its a big problem to switch it online. Also i can send something but one day after appear a window that this message wasnt send because .... now i have problem with my icloud account. i can see email in advance on my iphone and ipad but on computer in the best way in one hour. Could someone from you help me to solve it? before i have changed my job i was using MS Outlook on this computer and with less failures then this Apple product.
Felix,
I agree, I think it is a bug. My wife is experiencing the exact same issue on her MacBook after upgrading to Lion.
I submitted Mail feedback tonight to Apple. I hope they get this fixed pronto. My wife prefers Mail to the web interface or using her iPhone for mail. Thanks for explaining the issue. -
Hi, how do i set up my iMac, iPad and iPhones so that when i delete an e-mail (or other action) from one it automatically syncs and duplicates the action on the other devices?
You need an IMAP-type email service rather than a POP-type mail service. IMAP automatically does what you want. Contact your email provider to see if they offer IMAP.
-
I’m trying to send email using exchange send connector STARTTLS setting to the SMTP server. I have read multiple documents on configuring TLS for send connector, but they talks about outbound connections to internet facing servers. My Exchange 2013 and SMTP
server is in the same domain (let’s say A.com) and I’m creating dummy domains on my SMTP server (e.g.
[email protected],
[email protected] ) and their respective send connectors on the exchange server end. In the smart host section added the IP address of the SMTP server and in the scoping section added the SMTP domain address (e.g. dummy1.local ). In the FQDN field, added
the FQDN of the exchange server 2013 which certificate is enabled with SMTP service.
Could you tell me a step by step procedure, where I’m going wrong or any extra settings needs to added?
Presently, it is giving me an error that 530 5.5.1 TLS encrypted connection is required.
Note: I’ve created the Microsoft CA certificates for the SMTP and exchange servers and imported them in the personal certificate container. In which, the exchange certificate is created with FQDN name of the server and enabled for the SMTP service.
I’m using OPENSSL certificate for making the SMTP server TLS enabled. (let me know, if I need to import the OPENSSL certificate anywhere on the exchange end)?
Thanks!-IgnoreSTARTTLS is set to false on the send connector properties.
I'm trying to established a HTTP over TLS connection. I'm not using mutual TLS between these two server.
The send connector protocol logging is attached as below,
2014-09-22T20:09:45.468Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,2,10.219.3.74:24939,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:45.546Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,3,10.219.3.74:24939,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,4,10.219.3.74:24939,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,5,10.219.3.74:24939,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,6,10.219.3.74:24939,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,7,10.219.3.74:24939,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,8,10.219.3.74:24939,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,9,10.219.3.74:24939,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,10,10.219.3.74:24939,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,11,10.219.3.74:24939,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,12,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,13,10.219.3.74:24939,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,14,10.219.3.74:24939,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,15,10.219.3.74:24939,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:45.624Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,16,10.219.3.74:24939,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:45.640Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,17,10.219.3.74:24939,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:45.655Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,18,10.219.3.74:24939,10.219.3.73:25,>,STARTTLS,
2014-09-22T20:09:45.671Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,19,10.219.3.74:24939,10.219.3.73:25,<,220 2.7.0 Ready to start TLS,
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,20,10.219.3.74:24939,10.219.3.73:25,*,,Sending certificate
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,21,10.219.3.74:24939,10.219.3.73:25,*,CN=Exchange.A.local,Certificate subject
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,22,10.219.3.74:24939,10.219.3.73:25,*,"CN=DC-CA, DC=A, DC=local",Certificate issuer name
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,23,10.219.3.74:24939,10.219.3.73:25,*,63E7E70100000000000B,Certificate serial number
2014-09-22T20:09:45.687Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,24,10.219.3.74:24939,10.219.3.73:25,*,CAEB1200CDF49715E5F2E4B8315EFDDC01F8F945,Certificate thumbprint
2014-09-22T20:09:45.780Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,25,10.219.3.74:24939,10.219.3.73:25,*,Exchange.A.local,Certificate alternate names
2014-09-22T20:09:46.654Z,Exchange-SMTP send connector,08D1A4A14C7EDED5,26,10.219.3.74:24939,10.219.3.73:25,-,,Local
2014-09-22T20:09:46.669Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,0,,10.219.3.73:25,*,,attempting to connect
2014-09-22T20:09:46.685Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,1,10.219.3.74:24940,10.219.3.73:25,+,,
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,2,10.219.3.74:24940,10.219.3.73:25,<,220 SMTP.A.local Welcome (MTA version),
2014-09-22T20:09:46.701Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,3,10.219.3.74:24940,10.219.3.73:25,>,EHLO Exchange.A.local,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,4,10.219.3.74:24940,10.219.3.73:25,<,250-SMTP.A.local Exchange.A.local OK,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,5,10.219.3.74:24940,10.219.3.73:25,<,250-SIZE,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,6,10.219.3.74:24940,10.219.3.73:25,<,250-8BITMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,7,10.219.3.74:24940,10.219.3.73:25,<,250-BINARYMIME,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,8,10.219.3.74:24940,10.219.3.73:25,<,250-PIPELINING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,9,10.219.3.74:24940,10.219.3.73:25,<,250-HELP,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,10,10.219.3.74:24940,10.219.3.73:25,<,250-DSN,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,11,10.219.3.74:24940,10.219.3.73:25,<,250-CHUNKING,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,12,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,13,10.219.3.74:24940,10.219.3.73:25,<,250-AUTH=SCRAM-SHA-1 GSS-SPNEGO DIGEST-MD5 CRAM-MD5 NTLM,
2014-09-22T20:09:46.716Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,14,10.219.3.74:24940,10.219.3.73:25,<,250-STARTTLS,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,15,10.219.3.74:24940,10.219.3.73:25,<,250-DELIVERBY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,16,10.219.3.74:24940,10.219.3.73:25,<,250-MT-PRIORITY,
2014-09-22T20:09:46.732Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,17,10.219.3.74:24940,10.219.3.73:25,<,250 ENHANCEDSTATUSCODES,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,18,10.219.3.74:24940,10.219.3.73:25,*,,sending message with RecordId 52652004081667 and InternetMessageId <[email protected]>
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,19,10.219.3.74:24940,10.219.3.73:25,>,MAIL FROM:<> SIZE=7653 BODY=BINARYMIME,
2014-09-22T20:09:46.810Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,20,10.219.3.74:24940,10.219.3.73:25,>,RCPT TO:<[email protected]>,
2014-09-22T20:09:46.825Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,21,10.219.3.74:24940,10.219.3.73:25,<,530 5.5.1 A TLS-encrypted connection is required,
2014-09-22T20:09:46.950Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,22,10.219.3.74:24940,10.219.3.73:25,<,503 5.5.1 unexpected RCPT command,
2014-09-22T20:09:46.981Z,Exchange-SMTP send connector,08D1A4A14C7EDED6,23,10.219.3.74:24940,10.219.3.73:25,>,RSET, -
I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.
Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad. -
How can I set firefox as default browser in citrix server, only for few groups. does -silent -setdefaultbrowser option working in latest version?
I think so: [http://discussions.citrix.com/topic/330585-firefox-default-browser-for-all-users/]
Can you also set the default programs in the Group Policy User Settings?
Reference: [http://community.spiceworks.com/topic/884740-default-user-profile-in-citrix-environment] -
Can't Send Mail Via HughesNet SMTP Server
After installing 10.5 I find that I can receive mail from my ISP (HughesNet) but I can't send mail through the smtp server. I've tried every setting possible and even duplicated the settings off my wife's 10.4.10 iMac and I still can't send mail. All I see is that the smtp service is "Offline."
Fortunately, I have a .Mac account so I can send mail using that smtp server. But I'd like to be abel to use my HughesNet server.
Does anyone have any suggestions?My mom uses RoadRunner by Time Warner. She was able to receive email using Leopard and Mail but not send. SMTP server was the big problem like everyone else here experienced. We finally were able to get it to work using many ideas here. What we did:
1) Delete com.apple.mail.plist from the User/Library/Preferences folder (BACK UP YOUR EMAIL FIRST)
2) Open Mail and create a new account but disable the automatic set-up feature, put your info in manually.
3) Uncheck " Use only this server" from the outgoing mail
4) Under the Advanced tab on Mail Prefs "port set to 25", Uncheck "SSL" box, and uncheck "Use Authentication"
5) Now hit Create
It took Mail about 20 minutes to contact the SMTP server, but it did and now I can send and receive Mail without any problems on her computer.
Bad Apple...stop criticizing MS and Vista when your own house is not in order yet. Hope this helps someone out there..... -
Mail and SMTP server settings of ASA Certificate Authority for cisco anyconnect VPN
Dear All,
i have the folloing case :
i am using ASA as Certificate authority for cisco anyconnect VPN users,the authentication happens based on the local database of the ASA,
i want to issue a new certificate every 72 hours for the users ,and i want to send the one time password via email to each user.
so what the setting of the mail and smtp server should be ,
was i understand i should put my smtp server ip address then i have to create the local users again under(Remte VPN VPN--Certificate management--Local certificate authority --Manage user Database) along with their email addresses to send the one time passsword to them via their emails.
i sent the email manually ,hwo can automate sending the OTP to our VPN users automatically vi their emails?
Best regards,Thanks Jennifer.
I did manage to configure LDAP attribute map to the specific group policy.
Nevertheless, I was thinking whether I can have fixed IP address tied to individual user.
Using legacy Cisco VPN Client, I can do it using IPSEC(IKEv1) Connection profile, where I set Pre-Shared Key and Client Address Pools. Each Client Address Pools has only 1 fix IP address.
Example: let say my username is LLH.
Connection Profile for me is : LLH-Connection-Profile, my profile is protected by preshared key.
Client Address Pool for me is : LLH-pool, and the IP is 172.16.1.11
Only me know the preshared key and only me can login with my Connection Profile.
Using AnyConnect, I have problem. User can use any connection profile because I cannot set preshared key for AnyConnect. In that case, I cannot control who can use my Connection Profile and pretend to be me.
Example:
AnyConnect Connection Profile for me is : LLH-Connection-Profile, without any password
Client Address Pool for me is : LLH-pool, IP is 172.16.1.11
Any body can use LLH-Connection-Profile, login with another user name, let say user-abc which is a valid user in LDAP server. In that case, ASA assign 172.16.1.11 to user-abc and this user-abc can access server which only allow my IP to access.
I hope above description can paint the scenario clearer.
Thanks in advance for all the help and comment given. -
how do I keep the classic look ? I go to mail preferences and click the button but when I launch mail again it is still in the list view which I hate. Anyone know ?
The first thing to try if a setting does not "keep" is a PRAM reset.
http://support.apple.com/kb/ht1379
Change the setting to what you want, then PRAM reset on restart:
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
Mail, iCal Server and iChat server will not work over VPN
I have an Airport Extreme Base Station at the office running the network. Behind it sits a Mac Mini Snow Leopard server running 10.6.3. The ports necessary for Mail, iCal Server and iChat work fine through that external connection. I can also connect with VPN from my 10.6.3 clients.
HOWEVER, when I connect with the VPN clients, I am suddenly unable to access the Mail, iCal Server, Wiki server and iChat server. All connections time out. I can ping the server and I can do other things that do NOT work on the public Airport like ssh or VNC. ssh and VNC are closed at the airport extreme.
So it's pretty odd. When I'm connected via the VPN, all ports that are forwarded to the Snow Leopard server time out over the VPN.
I've tried various and sundry configurations with the VPN client. This includes trying to send all traffic over the VPN, moving it up in the service order, etc. etc. Nothing fixes it. DNS resolution is working fine, however when I do a wireshark capture of ppp0 traffic, I notice that SSL and TLSv1 handshakes appear to occur on the public IP address instead of the private network IP address... and they're all resets.
Has anyone gotten this to work successfully? Like I said, all ports that are NOT forwarded through the Airport work fine over the VPN, but will not work when connected to the VPN. It's really bizarre.New data: any ports that are normally forwarded on the Airport Extreme to the Mac Mini server will not work when connected to the VPN.
For instance, if I have imaps/993 forwarded from the Airport Extreme to the Mac Mini, it works fine over the Internet. If I connect to the VPN, I can connect to all OTHER services on the Mac Mini, but Mail, for instance, will not work. -
How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.
How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.
-
How presentation server and BI server will communicate
hi
i have a question that how the bi server and presentation server will communicate
Thanks
SreedharHi,
Refer this link... http://www.ealliancebusinessintelligence.com/obiee_architecture.php
http://gerardnico.com/wiki/dat/obiee/obiee_overview
http://gerardnico.com/wiki/dat/obiee/bi_server
Might be helpful
Thanks,
Srikanth -
HI, I just bought an iPhone 4S. Although my iPad and other iPhone 3GS connect to our server (SBS2003) I cannot get through. It checks all items in the connection and then I get the message :Cannot get mail, the connection to the server failed." I Tried everything, rebooting, reset all iPhone, etc. All Apple devices work perfectly expect mine. Please advise
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
for some reason i have more than one apple id, not sure how, must have set one up ages ago and forgot about it. can i delete one, or merge them? how do i know im not going to lose info if i delete one account?
You can neither merge or delete them. Pick one and stop using the other. If they both have purchases associated with them you will have to keep using both.
Maybe you are looking for
-
Oracle VM server Install - Media Test on bootable CD fails
I have made 3 cd's on 2 different machines and when I run them to install the VM Server on a machine with a clean hard drive (ok irrelevant) I get an error when I try to run the Media Test. I have verified the checksums on the original ZIP files I do
-
I have one PC with a modem and linksys router #BEFW11S4 i...
I have one PC with a modem and linksys router #BEFW11S4 installed. I have 3 other PC's which connect to it via Linksys wireless-G adapters. Things have been working just fine until recently when now at least twice a day my Pc's with the adapters lose
-
Ok heres the issue. I have a Power Mac G5 with graphics card that has one DVI port and one ADC port. I am trying to hook up dual monitors. Now after the apple store told me to buy a 30 dollar adaptor that converts a ADC to DVI-D, i then realized i ne
-
Hi, How to Enhance the Custom infotype in Hr-abap, Regards, srujan
-
SOA - Database Adapter push data to BAM
I would like to create an SOA application to pull data from an Oracle Database and push it Oracle BAM. In the past I've done this by using the "Polling for new or changed records in a table" from the Database Adapter to pull new data from the databas