How do I set up a page that a user can edit online?

I am setting up a simple website for a restaurant moxibistro.com. The client has asked me to set up a page for her "Weekly Special" She wants to be able to edit this page once a week with a different special. She doesn't have a mac so I'm thinking there has to be an online service that she could use for this page. Is there something that I could just embed the HTML of that page into iWeb and it will update as she changes it.
I was thinking maybe she could use sites.google.com but I don't know if I could embed the page contents into my site or how I would make the theme look consistent.
Any ideas?

Basically, if your client does not have a Mac then don't use iWeb to create the site. iWeb is Mac only and if a client wishes to make alterations, then they need the domain file.
If your client needs to update on a weekly basis, then why not consider using one of the online website creation packages where you can log in from any Mac or PC. This would be simpler and there are lots out there - Microsoft Office Live or Google or something like http://www.wix.com where you can create a site and use a domain name with it.
Look at the alternatives before using iWeb.

Similar Messages

How to set the maximum length that a user can enter in Msgstyledtextinput

Hi Everyone,
I'm currently using EBS 11.5.1 and 10.2g DB
Is there a way that I can set the maximum length that a user can input?
I changed the Maximum Length to lower number (from 150 to 100) but I get the following error.
Developer Mode Exception encountered in item SaveLocation
Error: The item SaveLocation has a maximum length (100)
         which is not equal to that of the corresponding VO attribute
       , SaveLocation length (150).
Action: Make sure they are equal in size. There must be other way to set that value
Thanks,
Elmer

You have to set the maximum length of column to 150 to avoid this error.
You can set the same in Jdev.
Thanks
--Anil

How to limit the max dialog no that one user can use at the same time?

Hi,
I meet one performance problem that one user can open 6 sessions in the GUI and he/she can run 6 reports at the same time witch could occupy 6 dialogs in the sap R/3 instance. It makes poor performance for other users.
Would you pls tell me how to limit the no. of sessions one user can create at the same time or how to limit the no. of dialogs one user can occupy at the same time?
Thanks a lot!
I used this parameters in the default profile as blew:
rdisp/rfc_check 1
rdisp/rfc_use_quotas 1
rdisp/rfc_max_own_used_wp 20 (means: 20%)
It still didn't work.
Sean

Hello,
We can reserve DIA W.P by giving value to the parameter :- rdisp/rfc_min_wait_dia_wp=1(default)
that have to necessarily remain free for other users.
This parameter is used to reserve a number of dialog work processes for Dailog mode.
For eg. If 10 dialog w.p. are configured for the instance(rdsip/wp_no_dia=10) and the parameter rdisp/rfc_min_wait_dia_wp=3 is set,parallel RFC's can occupy a maximum of 7 DIA W.P.3 DAI W.P. always remain free for dialog mode.
But now the question is how we assign/restrict this free dialog w.p. to the specific user.
Reply...
Regards,
JUNAID

TS3406 I have an iPhone 5 c, iOS7 op. system. I have left a vouice message, but after the part of my vm mail ending "please leave your message after the tone", I do not hear a tone. How do I set a tone so that s.o can then leave a message after this? T

I have an iPhone 5C, w/iOS7 op. system. I have left a voice message, ending with "please leave your message after the tone". However, I do not hear a tone; how do I set up my phone answering system so that a tone is heard after my message? Thanks!
Don in KS

[url="http://web6.streamhoster.com/em2253/ZEN/ZenDeviceManager.wmv]See Movie[/url]?Hi, take a look at the movie... hopefully I answer to your question is there. [b]Let me know if you can NOT see it... [/b]and I will send you a picture. [color="#ff0000"]and if you can see the movie, give me feedback on it. Did it look ok in your computer? (it changes with all computers depending on your setting and player!). [color="#ff0000"]Was the sound ok?I almost wish I had not titled this post as "Happy Conclusion." It was happy but only a day or two... then I started having other problems... unbelievable. So, If I gave the wrong impression, sorry!

In javascript, how do I open a dialog so that the user can input the value of a variable?

I'm working on a script that will be used for many images, all of them using the same format (size of the image, layer layout, etc).
All of these images will have a layer of text, and what I want is to have the script modify the horizontal length of the text layer (horizontal percentage scale), shrinking it so that all of the text appears on-screen, in case there's too much of it.
But the text will vary from image to image, and what I want is for the script to display a dialog box were the user can input the text that will be put on the text layer and scaled down.
Can this be done?

If you want the user to both enter then fit the text while your script is running, here is one way to do that.
var typeLayer = activeDocument.activeLayer;
var type = typeLayer.textItem;
var t = prompt ("Enter text" , "new text");
type.contents= t;
transformLayer();
function transformLayer() {
     try{
     var desc = new ActionDescriptor();
        var ref = new ActionReference();
        ref.putEnumerated( charIDToTypeID('Lyr '), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
    desc.putReference( charIDToTypeID('null'), ref );
    desc.putEnumerated( charIDToTypeID('FTcs'), charIDToTypeID('QCSt'), charIDToTypeID('Qcsa') );
        var desc1 = new ActionDescriptor();
        desc1.putUnitDouble( charIDToTypeID('Hrzn'), charIDToTypeID('#Rlt'), 0.000000 );
        desc1.putUnitDouble( charIDToTypeID('Vrtc'), charIDToTypeID('#Rlt'), 0.000000 );
    desc.putObject( charIDToTypeID('Ofst'), charIDToTypeID('Ofst'), desc1 );
    desc.putUnitDouble( charIDToTypeID('Wdth'), charIDToTypeID('#Prc'), 100 );
    desc.putUnitDouble( charIDToTypeID('Hght'), charIDToTypeID('#Prc'), 100 );
    desc.putBoolean( charIDToTypeID('Lnkd'), true );
    executeAction( charIDToTypeID('Trnf'), desc, DialogModes.ALL );
     }catch(e){}

How do I set the default page that comes up when I add a new tab (Click on "+" in upper right)?

When I click on "+" in the upper right to open a new page, it is coming up in a commercial site which I do not want. How to fix?

Thanks for the suggestion.
A few weeks ago I downloaded some free software from the "tucows.com" website, it appears to have permanently hijacked my web browsers (both firefox and IE) so all searches go to their "searchqu" site, and new tabs open at that site. I was unable to repair this with the addins you suggested or by editing my user preferences files, and ended up having to reinstall firefox. Hopefully I won't run into the tucows rootkit ;)
But thanks anyway.
-DPT

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

As a writer I'm using Pages to write my documents but the title shows up on every page. How do I set-up my page so that it shows up on only the first page?

Don't put it in the Header.
Peter

I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
Thanks.

Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
If possible, please try Indesign CS 4.

How do I set a fixed page size in Muse so that the window always stays the same size

how do I set a fixed page size in Muse so that the window always stays the same size

Hi Aish & thanks for responding;
I would like the window size to stay the same for the entire site and not be
able to scale to drag & scale it. ie 950 pixels x 500 pixels.
Thanks,
JB
On 12/4/14 3:30 PM, "Aishvarya Raj Rastogi" <[email protected]>

When I open up Safari, how do you set it up so that it goes to your set homepage and not your last page visited?

Whenever I open up Safari, it opens up what I exited out of instead of my homepage. How do I set it up so that it does not do this?

A few approaches are possible.
To prevent the "resume" feature of Safari you can either option-quit it, or hold shift down when starting it.
To prevent the "resume" feature for all applications you can uncheck the box "Restore windows..." in System Preferences, General.
charlie

How do I set it up so that when I reply to a website through Firefox, it is sent through Google and not Outlook

I use Google for my email server. When I am searching the web on Firefox, I want to reply to a "Contact Me" prompt from the website.....in that case, how do I set Firefox up so that it replies via Google and not Microsoft outlook?

Click on Tools at the top of the page and go to Options; choose the Applications tab. Scroll down until you see "mailto" on the left, under Content type (or type it in the Search box) then click to the right on "Use Microsoft Outlook (default)". A scrolling box will open up giving you different choices.
Choose what you want and click "OK".

How do I set a default page size, orientation, and printer for a particular document in Pages?

I have a simple label document in Pages which I print to my label printer. The label is 1.49 x 3.47 inches and needs to print in Landscape, and it needs to print to my Dymo label printer. How do I set up the Page Setup or Print Setup so it defaults to this document size, orientation, and printer, every time, without me having to manually enter those settings every time?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

How do I set the default page when I select "+" for a new tab? Right now it defaults to Yahoo search and I want to set it to my Speed Dial page. I did have the default page set to Speed Dial but I can't find anywhere how I did it in the past.

You can set the homepage for opening tabs, but I can't find the setting for designating what page opens when I hit the + button on tabs.
This is the page that loads:
http://search.yahoo.com/?fr=freeze&type=W3i_NA,132,3_6,Tab%20Search,20100937,6693,0,16,0
How did Yahoo embed this in the Tab settings?

Firefox '''does not''' come with a setting for a page that opens in a new Tab, the default installation always opens a blank page when you open a new Tab. Many extensions include a feature to open their choice of a webpage when you open a new tab, as does the Speed Dial extension which uses a "local page" internal to Firefox.
You need to figure out which extension has taken over that preference that Speed Dial needs to use. You didn't bother providing a Troubleshooting Information... listing as requested when you asked this question, but I can guess your problem is related wither a Yahoo extension or a Conduit / OurToolbar extension - as there is a plugin listed = Package Installer & Install Conduit.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

How do I set up a template that works for multiple folder levels

I want to segregate groupings of pages on my site because
they focus on specific content areas. The template that I created
works fine for pages in the root but if I try to create a
template-based page in a sub-folder then I get all kinds of "not
founds" on includes, css files, etc.
How do I set up a template that will cover both the root
pages and sub-folder pages?
TIA,

You use root relative links in your includes and CSS links.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"lwoods" <[email protected]> wrote in
message
news:e9qpol$meg$[email protected]..
>I want to segregate groupings of pages on my site because
they focus on
> specific content areas. The template that I created
works fine for pages
> in
> the root but if I try to create a template-based page in
a sub-folder then
> I
> get all kinds of "not founds" on includes, css files,
etc.
>
> How do I set up a template that will cover both the root
pages and
> sub-folder
> pages?
>
> TIA,
>

How do I set the home page for a new tab?

How do I set the web page for when I open a new tab? Whenever I open a new tab it goes to an error site which freezes my firefox browser for a while. How do I change that? I want to open new tabs with google being the home page. I need to set up the homepage for a new tab NOT a new window. Please help! !

If Google is set as your Homepage in Firefox you can middle-click ''(push down on the mouse wheel)'' to open Google in a new Tab.
Or, you can add the feature to Firefox where clicking the New Tab button on the Tab Bar opens your Homepage in a new Tab. <br />
https://addons.mozilla.org/en-US/firefox/addon/new-tab-homepage/
And if you have a different Homepage set, this extension allows for any page you set in the extension's options to open when you use the new Tab button. <br />
https://addons.mozilla.org/en-US/firefox/addon/newtaburl/

How do I set up a page that a user can edit online?

Similar Messages

Maybe you are looking for