How do i set up a PHP,MYSQL,Apachie server on my macbook

I play a well known MMORPG (WoW) and my guild recently lost there site due to owner of the site leaving the guild, i had previously mentioned i had a little experience in designing but not developing so they asked me to develop a web site for the guild with DKP (Dragon Kill Points like currency) info, Forum and other features.
basiclly most of the work is done on the site design wise and mockups i just now have to create a forum, so i found an online document showing step by step forum development (using Dreamweaver 8 and impAKT) but a pre-req is i have to have a server set up on my system to create it i have no idea about server set up or maintence and i have never had a site published please any help would be much apreciateded on setting up a server. Thank you for your time.

Apache is already running on your Mac if you are running OS X.
PHP for Mac OS X is free, and can be downloaded from http://www.entropy.ch/software/macosx/php/. There is some good instructions on installing and testing your installation. It also provides links to PHP add-ons, such as MySQL. Great page. I think it should get you started in the right direction.

Similar Messages

How to install and configure latest xampp, php, Mysql, apache server, and configure it with dreamvie

Working on my next project for the tech blog Techmozilla I am trying to make php to work with Apache. . i surfed for the procedures and finally i was asked to do the below mentioned operation .. but i am unable to understand it can anyone please help me .I am using Windows XP
# Add the following 3 lines to your httpd.conf file. You can put them anywhere in the file but maybe it makes sense to put them after the other LoadModule section.
LoadModule php5_module "d:/Program Files/php/php5apache2_2.dll"
AddType application/x-httpd-php .php
PHPIniDir "D:\Program Files\php"
Is there any other link which helps to install PHP,Apache and MySql. Please help me. Thank you in advance

This forum is for helping people who are trying to download and install Adobe software products. You need to find an information resource suitable to the task you are undertaking, most probably provided by whomever provided the resource(s) you are trying to install.

How to set up a PHP/mySQL "server" in arch?

Hi,
I know its a wide question, and i may have to go to different howtos and such, but as this distro is different from the others there might be some differences in that.
If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work ?
if you can post any link to some info, it wont hurt. and yes i will google anyway!

sud_crow wrote:If i want to run a PHP based site in mozilla and the site is hosted in my machine, do i need to do something real strange to make it work?
I am running Apche/PHP/MySQL on my machine and simple to setup. Few things requires to know. It can be done in different way. This is how I do including how to test the server(s). Host name is: "localhost". If anything is missing, please let me know.
INSTALL:
pacman -S apache
pacman -S php
pacman -S mysql
APACHE:
1. Add the following line in /etc/httpd/conf/httpd.conf :
LoadModule php4_module /usr/lib/apache/libphp4.so
AddModule mod_php4.c
AddType application/x-httpd-php .php
2. Add line in /etc/host :
127.0.0.1 localhost.localdomain localhost
3. Edit /etc/rc.conf :
# Networking
HOSTNAME="localhost"
4. Run in terminal (root):
# /etc/rc.d/httpd start
5. Edit /etc/httpd/conf/httpd.conf (close "AddModule mod_php4.c"):
LoadModule php4_module /usr/lib/apache/libphp4.so
# AddModule mod_php4.c
AddType application/x-httpd-php .php
6. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/httpd start
Test Apache:
http://localhost/
PHP:
1. Edit /usr/etc/php.ini (open the mysql extension):
extension=mysql.so
Test PHP with a simple script:
<html>
This is a test. Say hello to Arch:

<body>
<?php
$myvar = "Hello Arch Linux";
echo $myvar;
?>
</body>
</html>
Save the file as "test.php" and copy to /home/httpd/html/
Test PHP:
http://localhost/test.php
MySQL:
1. Run in terminal:
# /etc/rc.d/mysqld start
2. Add line in /etc/rc.local (to start at boot):
/etc/rc.d/mysqld start
Test MySQL
Run in terminal (don't enter any password):
# mysql -p
Note: Change the /var/lib/mysql directory to user "mysql" if not getting MySQL to run.
For more information (if new in PHP/MySQL):
http://hotwired.lycos.com/webmonkey/99/21/index2a.html

PHP, MySQL, Apache and MAMP

Could someone tell me if there will be any problem if I first downloaded PHP then MySQL and after I enabled all these things I installed MAMP? Is it possible to delete all those things that I have donloaded before MAMP? If so, then how to do it?

Since these are basic server apps, you should post to the server products forums.

How do I set up a new sub group email on the macbook ?

I will begin by freely admitting that I am not computer literate...I switch on and use. The present email has been in existence for so long I can't remember how it was set up, think the laptop did it by itself.
The problem...
I want to set up a sub group email address for the small club that I am treasurer for and then use this so members can pay subscriptions via paypal.
I followed the yahoo instructions to set a new email address and this was OK, the address is shown at the foot of the my account page on yahoo as the only sub group. ISP is BTinternet.com so that uses yahoo.
Easy so far.
Remember opening sentence !
How do I set up my existing email page to show when a message has been received on the new sub group email. I use macmail on a macbook , not PC outlookexpress. In other words, how do I open/access/show this new email on the macbook ? I don't want to compromise the existing email set-up, just have a 'secondary' or 'sub group' account.
Thanks
Brian

Yes, you just setup another account in Mail, on the Second page where it has Description you need another Name in there than the Other one has.
http://email.about.com/od/macosxmailtips/qt/access_aol.htm
Message was edited by: BDAqua

How do I set up an external MIDI input on the new MacBook Pro? Mine won't read it.

I've been trying to set up my TASCAM US-600 on my new MacBook. I've never used a Mac before so I'm not sure what's wrong. I tried installing the drivers and when I plugged in the interface, it wouldn't read the device. I now have the interface plugged in through a USB hub. The Mac now reads TASCAM software but when I go to the system preferences, the Mac won't read the MIDI input. So all in all it's been a big pain in the ***. Are there any Mac experts that may know what the problem is or how to help? Thanks!

are you sure its mini display port? MDP and thunderbolt are the same port.
for referenece, this is mini DVI (obsolete)
Kobushi-mini-dvi.jpg
This is mini display port
Mini_displayport.jpg

How do I set up file sharing in Lion Server to work like file sharing in Lion Client?

I've just installed Lion Server on my home iMac to enable remote access via VPN to my home network.
When the iMac was running Lion Client (before the upgrade to server), and when File Sharing was enabled on the iMac; when other Macs on the LAN connected to the iMac via AFP, they were always able to connect to (share) any mounted external volumes (external USB or FireWire drives connected to the iMac). e.g.
Now that I've upgraded to Lion Server, when other Macs on the LAN connected to the iMac via AFP they are only able to connect to (share) the sharepoints listed in the File Sharing pane of Server.app. e.g.
Is there any way to set up File Sharing in Lion Server so that it works the same way as it does in Lion Client with respect to mounted external volumes? i.e. they are automatically shared? I know I can add each volume manually to File Sharing in Server.app but this gets tedious.
Many thanks!

I normally have a Firewall enabled. I recently had to do an erase and install of Lion, followed by a one-by-one re-install of all of my software. One of the first things I did was to set up all of my System Preferences the way I like them; Turning the Firewall on was one of them. Later I noticed it was off and turned it on again. I had already set up sharing and was surprised to see the problem when I turned it back on.
As to why do I think it needs to be on. It is another part of my security layer.

How do I set up a private enterprise messaging server?

The iPad and iPhone messaging app seems to require that the messaging server must be in the Apple cloud. Is there a way to set up a private enterprise messaging server?

Is there a way to set up a private enterprise messaging server?
Yes: http://lync.microsoft.com/en-us/Pages/unified-communications.aspx

How do I set a breakpoint in a Java Server page (.jsp)?

I have set up an application for remote debugging and am able to connect to it from JDeveloper. When the code execution comes to breakpoints that I have set in java (.java) files they work and the application stops so I can debug etc.
This also applies to breakpoints set in java code that is called from Java Server pages.
However if I set breakpoints directly in a java server page whether it is in html code or in java code (such as scriplets) the execution does not stop and the breakpoints are ignored.
Why? Is there some extra thing I have to do? I have tried in Project Properties/Run/Debug/Profile/Edit/Launch Settings to choose server as Virtual Machine for instance but that does not change anything.
Comment. I do not know if this is of interest but I am going to add some java server pages to an application and they are defined in a directory like this:
. . . src\org\yawlfoundation\yawl\resourcing\jsf\jsp
but when the tomcat deploys the .war file they end up here:
. . . apache-tomcat-6.0.18\webapps\resourceService
As I can find no package declaration in a .jsp file this should not matter but I mention it anyway.
Edited by: user10477024 on Nov 25, 2008 5:32 AM

Hi user10477024,
thanks for explaining your background on what you are trying to do and I do understand the approach you are taking. Unlike user10689900's completely random post.
I've tried to convey why there is no support for JSP debugging in JDev, but again the main reason is that the current frameworks do not code Java directly into a JSP. The JSP is purely used to position the components on the page aiding visual design and real Java classes in tag libs do the rest.
So the evolution has been:
Servlets (Java classes writing HTML logic and intermingling presentation and business logic)
JSP 1.0 JSP (HTML looking) files where you can add scriptlets enclosed in <% ... %> <- you are here
JSP 1.1 Introduction of Tags and Tag libraries, tag libraries are true java classes and the JSP controls layout and simpler more elegant design.
Really JSP 1.1 is all about building reusable components together in tag libraries that can be reused across pages and improving design by not mixing presentation and business logic code together.
If I had inherited something as you have, my advice (if you can) would be to code up some tag libraries because it would be a good learning experience and would be very helpful for moving to more advanced frameworks like JSF.
regards,
Brenden

Snow Leopard, PHP, MySQL, Apache and Wordpress!

Hi there,
It's taken me most of the day to work this out, so I thought I should post about it somewhere and here, on the Apple forum, is the ideal location.
I'm a web developer and love the fact that my MacBook works out of the box with a Unix webserver and with little effort, I was able to set up PHP and MySQL on it. I was delighted to hear that the new Snow Leopard was shipping with the latest and greatest of both. It wasn't quite that easy when it came down to running my test sites, one of which I'm working on is a Wordpress site. Far from being daunting, the solutions to the problems I had were quite simple. The issues arose from the OS not having much exposure yet and not many people having posted their experiences on the web. It was just time consuming.
I should mention at this point that this does require some tinkering with Terminal, but not so much as to cause damage if you do something wrong.
First off Apache. Thankfully this is as stable as it always has been. All this requires to activate it is to visit System Preferences > Sharing and switch on Web sharing. Bish-bosh, job done.
Next off PHP. If you open a Safari window and run your phpinfo.php file (where ever you have it saved. If you don't, they're out there, it's a tiny piece of code which you can use to find out your current php setup). You'll find that everything is superb! PHP 5.3! Excellent! Hang on, scroll down to the date and time section. Whoa! What's this big fat warning here.
That warning my friend, has been the bane of my misery all day. Wordpress hates it. HATES IT! It causes no end of grief. So what's the multi step, multi program solution?
Open your php.ini file and add the line:
date.timezone=Country/City
(do a Google search for PHP Timezones and you will get the exact settings. It's not so good that it understands every city in the world. My setting was Europe/Dublin).
That's all. This will solve your issue of the timezone error everywhere. Stop and start Apache (System Preferences > Sharing, tick off and tick back on Web Sharing) and hey presto, error is gone.
Wait a minute, where the **** is my php.ini file. Unfortunately this is where you have to get your hands dirty. Your php.ini file is a system file which resides in the /etc/ folder. Open a terminal window and type exactly the following:
cd /etc/
cp php.ini.default php.ini
This makes the php.ini file from the default. This protects the original so if you ever need to create a new copy or if you make a mistake in the next steps, you can start again.
Next I'm going to tell you how to edit this file. This uses a program called vi (there are GUI editors out there that will save you this heartache, so if anyone knows any, please post in response. I think TextWrangler is one).
First you need to set the php.ini file so you can edit it. Type in exactly as follows:
sudo chmod 777 php.ini
Sudo is the superuser commmand. It may not be needed, but stick it in anyway. If you are asked for a password, put in your normal password (that you would be asked for say if you were installing something you downloaded).
At the next prompt, type in:
vi php.ini
This will open the php.ini file. Using the up and down keys, find a blank line in the file. You will notice that alot of the lines start with ';'. These are commented lines. Once you find a blank line, press 'i' to insert text. Your screen will now say '-- INSERT --' at the bottom in red. Type the following in exactly (you will NOT be able to cut and paste):
; Set PHP Default Timezone
date.timezone=Europe/Dublin
Substitute "Europ/Dublin" with your own timezone. When you are done, press escape. Now type in the following:
:wq!
The colon is important (not a typo on my part) as this tells vi you are going to run a command. You should now be back at your prompt. Now you need to reset the permissions on the file. Type the following:
sudo chmod 444 php.ini
And that's it. That's your PHP setup and finished. If you run your phpinfo.php file now, you should see your timezone under the date and time where you were getting the error before.
Now the MySQL. This is a bit of fun because, even though MySQL ships with the system, it's not exactly set up correctly! So once again into terminal.
This time go to the local directory:
cd /usr/local/
If you type in:
ls -al
You'll get a directory listing. This has the MySQL folder listed as mysql-5.0.77-osx10.5-x86 (or something! I did that from memory!). This IS the MySQL folder but if you, like me, had previously set the MySQL Preference Pane in your System Preferences, then it won't be able to access this. Type the following command:
sudo cp -R /usr/local/mysql* /usr/local/mysql
This should copy everything into a folder called mysql. It takes a couple of seconds (first time on my machine it was a good 20 seconds) to run so be patient. Now you need to do the following:
sudo chown mysql:mysql /usr/local/mysql
This sets the owner and group of the mysql files to 'mysql'. If you go back to your MySQL preference pane in System Preferences, you should now be able to start it (something weird about it makes it require to close and reopen the System Preferences window before it can open the MySQL pref pane. This is normal, just click ok).
The bit that got me here, is that I thought that my activation of the MySQL was actually a new install. I tried everything to change the root user and password for MySQL but in fact, if you had it installed on Leopard, prior to upgrading to Snow Leopard, all your users and passwords are the same. If you HAVEN'T installed it before, I recommend you read the Post Installation Customisation (section 2.3) on the manual for MySQL 5.1 on http://www.mysql.com
So that's about it. All that remains is to test Wordpress. I have phpmyadmin installed (I've heard CocoaMySQL is very good, like iTunes for db's so I'm gonna check that out later) and was able to create the new wordpress database. I changed the settings in the wp-configure.php file to match my setup but nothing worked. I changed the host from '127.0.0.1' back to 'localhost' (a common complaint of the wordpress setup) but no joy. Then I changed the host back to '127.0.0.1' and added the port :3306 (so the full host is '127.0.0.1:3306') and bingo, the install worked, my database setup and my test site worked.
So that's it! Many of you out there will say, why didn't you just use MAMP. I did use MAMP, but I also got the Timezone issues and it took far more tinkering and hacking to make it work. I decided that, as my lovely MacBook now running lovely Snow Leopard had the lovely newest versions of PHP and MySQL installed, I'd rather get them working than use a runaround with MAMP. I'm a happier camper for it.
I hope this helps some of you out there. I don't personally have a blog yet, but when I do, I'll post this up there for all to access. I may even add screen shots!!! But seriously, I hope this helps you all out with your installs. It's so handy to have all this stuff straightaway with Snow Leopard, it's just a matter of getting it to work.
All the best now,
T

Hmmmm... I did a clean drive install of Snow Leopard because I used to do it once a year with Windows and hadn't done it in 3 with my MBP.
First, my httpd.conf file had the line enabling PHP commented out, so when I went to see my simple file with phpinfo(), I saw the source. Saw your post, thought it was the timezone, fixed that (which will probably make wordpress happy when I get it running), and it still didn't work. Looked at the httpd.conf file, found that PHP was disabled by default, fixed that line, restarted the server, and my phpinfo() worked like a charm.
Also if you want to edit config files, I use TextWrangler's "open hidden files" option.
But... I have no /usr/local directory at all. Doesn't exist on my machine. Checked the options in the base install and MySQL isn't offered as an option. Checked the optional installs and MySQL isn't there. Even letting spotlight search for hidden files, the only files with MySQL in their name were from php scripts in my web folders.
There's some stuff about installing/compiling from source.
http://hivelogic.com/articles/compiling-mysql-on-snow-leopard/
Dunno if I want to go down that road quite yet.

Local net ssh failure Tiger (PHP MYSQL Apache Dreamweaver)

I can't be sure, but I think this problem started with the latest security update. I'm 80% done with my first web application using PHP and Mysql in dreamweaver when I began getting an unknown error from dreamweaver when attempting to connect to my DB on my testing server. After 2 days of debugging and re-installing apps I finally wiped the testing server (G4 400 Cube memory topped out 120GB HD, down to the metal) reinstalled Tiger, fully patched, edited the httpd.conf file to enable php 4.4.1. Installed Mysql 4.1 (which was the last general distribution with a packaged install) and the server works fine, so I created myself as a user in mysql @localhost & @localmachinename to replicate root user. Navicat was up and running in no time, so I re-populated my server from my backup. Then I jumped over to my design workstation (G5 2Ghz Dual, 2GB Ram, 250GB HD) only to find navicat can't login to the mysql server because ssh wont connect to the G4. After much testing I discovered ALL of my macs will attach only to external addresses. My linux box, external linux boxes, even windows boxes emulating ssh will attach internally or extenally, the macs won't talk to anything in the local network 10.0.x What the ****! My project is now past due and I'm stuck because I can no longer ssh from any macs to internal machines mac or otherwise. PLEASE HELP!!! is there an SSH pakage so I can re-install? I couldn't find a mac ssh package on apple or ssh.org, Will that even make a difference? Can I uninstall the security update? Can anyone suggest a workaround?
My network
*10.0.1.2 Ganymede (Mandrivia 10 server and Gateway)
*10.0.1.6 Artemis (G5 10.4.7) Web/Video
*10.0.1.10 Miletus (G4 10.4.7) Web Testing
*10.0.1.5 Venus (G4 10.4.7) Photo editing
*10.0.1.4 Hero (G3 ibook 10.4.7) office work
*10.0.1.7 Hermes (iMac 10.4.7) iLife
*10.0.1.3 Apollo (Wintendo XP) Web Testing/The Sims
Here are several ssh logs.
mac to mac (FAIL)
Artemis:~ phil$ ssh -vv 10.0.1.10
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.0.1.10 [10.0.1.10] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 1.99, remote software version OpenSSH_4.2
debug1: match: OpenSSH_4.2 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
Write failed: Broken pipe
Artemis:~ phil$
Mac to linux internal (FAIL)
Artemis:~ phil$ ssh -vv 10.0.1.2
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 10.0.1.2 [10.0.1.2] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: An invalid name was supplied
Cannot determine realm for numeric host address
debug1: An invalid name was supplied
A parameter was malformed
Validation error
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
Write failed: Broken pipe
mac to linux external (Success)
Artemis:~ phil$ ssh -vv 69.253.x.x
OpenSSH_4.2p1, OpenSSL 0.9.7i 14 Oct 2005
debug1: Reading configuration data /etc/ssh_config
debug2: ssh_connect: needpriv 0
debug1: Connecting to 69.253.x.x [69.253.x.x] port 22.
debug1: Connection established.
debug1: identity file /Users/phil/.ssh/identity type -1
debug1: identity file /Users/phil/.ssh/id_rsa type -1
debug1: identity file /Users/phil/.ssh/id_dsa type -1
debug1: Remote protocol version 2.0, remote software version OpenSSH_4.3
debug1: match: OpenSSH_4.3 pat OpenSSH*
debug1: Enabling compatibility mode for protocol 2.0
debug1: Local version string SSH-2.0-OpenSSH_4.2
debug2: fd 3 setting O_NONBLOCK
debug1: Miscellaneous failure
No credentials cache found
debug1: Miscellaneous failure
No credentials cache found
debug1: SSH2MSGKEXINIT sent
debug1: SSH2MSGKEXINIT received
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit: none,[email protected],zlib
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: kexparsekexinit: diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-g roup1-sha1
debug2: kexparsekexinit: ssh-rsa,ssh-dss
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,arcfour128,arcfour256,arcfour,aes1 92-cbc,aes256-cbc,[email protected],aes128-ctr,aes192-ctr,aes256-ctr
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: hmac-md5,hmac-sha1,hmac-ripemd160,[email protected],hmac-sha1-96,hmac- md5-96
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit: none,[email protected]
debug2: kexparsekexinit:
debug2: kexparsekexinit:
debug2: kexparsekexinit: firstkexfollows 0
debug2: kexparsekexinit: reserved 0
debug2: mac_init: found hmac-md5
debug1: kex: server->client aes128-cbc hmac-md5 none
debug2: mac_init: found hmac-md5
debug1: kex: client->server aes128-cbc hmac-md5 none
debug1: SSH2MSG_KEX_DH_GEXREQUEST(1024<1024<8192) sent
debug1: expecting SSH2MSG_KEX_DH_GEXGROUP
debug2: dhgenkey: priv key bits set: 130/256
debug2: bits set: 514/1024
debug1: SSH2MSG_KEX_DH_GEXINIT sent
debug1: expecting SSH2MSG_KEX_DH_GEXREPLY
debug1: Host '69.253.239.85' is known and matches the RSA host key.
debug1: Found key in /Users/phil/.ssh/known_hosts:3
debug2: bits set: 516/1024
debug1: sshrsaverify: signature correct
debug2: kexderivekeys
debug2: set_newkeys: mode 1
debug1: SSH2MSGNEWKEYS sent
debug1: expecting SSH2MSGNEWKEYS
debug2: set_newkeys: mode 0
debug1: SSH2MSGNEWKEYS received
debug1: SSH2MSG_SERVICEREQUEST sent
debug2: service_accept: ssh-userauth
debug1: SSH2MSG_SERVICEACCEPT received
debug2: key: /Users/phil/.ssh/identity (0x0)
debug2: key: /Users/phil/.ssh/id_rsa (0x0)
debug2: key: /Users/phil/.ssh/id_dsa (0x0)
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug1: Next authentication method: publickey
debug1: Trying private key: /Users/phil/.ssh/identity
debug1: Trying private key: /Users/phil/.ssh/id_rsa
debug1: Trying private key: /Users/phil/.ssh/id_dsa
debug2: we did not send a packet, disable method
debug1: Next authentication method: keyboard-interactive
debug2: userauth_kbdint
debug2: we sent a keyboard-interactive packet, wait for reply
debug1: Authentications that can continue: publickey,password,keyboard-interactive
debug2: we did not send a packet, disable method
debug1: Next authentication method: password
[email protected]'s password:
debug2: we sent a password packet, wait for reply
debug1: Authentication succeeded (password).
debug1: channel 0: new [client-session]
debug2: channel 0: send open
debug1: Entering interactive session.
debug2: callback start
debug2: clientsession2setup: id 0
debug2: channel 0: request pty-req confirm 0
debug2: channel 0: request shell confirm 0
debug2: fd 3 setting TCP_NODELAY
debug2: callback done
debug2: channel 0: open confirm rwindow 0 rmax 32768
debug2: channel 0: rcvd adjust 131072
Last login: Tue Aug 15 12:56:42 2006 from artemis.ganymedia.net
[phil@ganymede ~]$
G5 Dual 2G Mac OS X (10.4.7)

Mac comes with a fully functioning Apache web server with all the scripting languages (except VB). You need to enable them in the configuration file.
You need some light weight UNIX administration skills to do this. Use the system restore disk to set the password for the root account.
Open a terminal screen from the Utilities folder in Applications. Type "su", press return, then enter the root password you set using the system restore disk.
Make a backup copy of the Apache configuration file with the following command (type this in with no mistakes and press the return key).
cp /etc/httpd/httpd.conf /etc/httpd/httpd.conf.copy
Enter the following to open the Apache configuration (type this in with no mistakes and hit the return key).
/Applications/TextEdit.app/Contents/MacOS/TextEdit /etc/httpd/httpd.conf &
Locate and remove the # comment symbol from the following lines and save the file in /etc/httpd/httpd.conf.
#LoadModule php4_module libexec/httpd/libphp4.so
#AddModule mod_php4.c
Exit the TextEdit application and quit out of the terminal application.
Put the following web page into a file named greetings.php inside the folder Library/WebServer/Documents.
<html>
<head>
<title>Experiment</title>
</head>
<?php
echo "Greetings";
?>
</body>
</html>
Once you have made these changes, you can reboot to activate the changes.
Put the following into your browser to test the configuration.
http://localhost/greetings.php
You should see "Greetings" on a web page titled "Experiment".
MySQL is a separate server that you need to download and configure to complete your web server.
I hope this helps.
Best regards - Greg

PHP/MySQl/Apache

Dear All,
if I embed this within the body of my php page, <?php
getFileSize('cover.pdf') ?>, all is well and I get the
desired result.
However, if I embed the same text, <?php
getFileSize('cover.pdf') ?>, into
my MySQL database, I get absolutely nothing at all.
Have tried adding htmlentities, urlencode and other such
fabulous things,
but all to no avail.
Basically, my knowledge isn't good enough, but somehow MySQL
seems to be
disabling the function. I guess I need to 'escape' the code
in some manner?
Any clues?
Craig Sherwood

David and Joris,
your posts make fascinating reading - many thanks.
I guess the one thing to explain is why!
I have a database driven site. My users enter information
into the database
via an admin section.
In their text they need to be able to enter links to
PDF/doc/jpg files.
These links could be anywhere in the text, thus it can't be
limited to a
designated field.
However, when the site visitors look at a page, I wanted to
be able to show
them the file size, so that they don't download unnecessarily
large files by
accident.
Hence the need for my users to be able to enter the file name
in a bit of
code and have the relevant page show file size in amongst the
text.
Craig
"David Powers" <[email protected]> wrote in message
news:[email protected]...
> Craig wrote:
>> So then the obvious question surely is how do you
execute a piece of code
>> if the 'call' to the function is in a database
field?
>
> The answer is that you don't do it. There is a PHP
function eval(), which
> evaluates a string as code. To achieve the type of
result that you want,
> however, it involves storing your string in the database
as PHP code. Try
> this simple example using your human() function:
>
> $filesize = 12345;
> $string = '$size = human($filesize); echo "This is the
size: $size";';
> eval($string);
>
> This displays "This is the size: 12.1k".
>
> The question remains why on earth you would want to
store PHP code in a
> database simply for the purpose of running it in a PHP
script? It makes
> far more sense to embed the code in your main script.
More importantly,
> eval() is considered to be a serious security risk. A
common saying among
> PHP developers is "Eval() is evil".
>
>> After-all, html code can be put in a field, but
rendered as proper html
>> (such as links for example) without the html code
(<a href etc) being
>> displayed.
>
> HTML is just plain text, which is interpreted by the
browser by referring
> to the text/html MIME type in the header. PHP needs to
be executed on the
> server before the output is sent to the browser. The
opening and closing
> PHP tags in a text field retrieved from a database are
treated as text in
> the same way as a PHP variable is treated as text when
included in single
> quotes. The only way to execute code stored in a
database is to use
> eval(), which has serious drawbacks.
>
>> FYI: The 'human' function displays either 'kb' or
'm' depending on the
>> file size and executes perfectly.
>
> Yes, after studying it more carefully, I have finally
worked out how it
> functions. It uses a for loop in a rather unconventional
way, which is
> what confused me. It also converts bytes to Gigabytes.
>
> --
> David Powers, Adobe Community Expert
> Author, "The Essential Guide to Dreamweaver CS3"
(friends of ED)
> Author, "PHP Solutions" (friends of ED)
>
http://foundationphp.com/

Php, mySQL, apache servers and all that malarkey...

Hello
I want to learn how to build databases and use dreamweaver to
build sites to for e-commerce shops or portfolio archives etc...
But at first glance im a bit overwhelmed. I am willing to put the
time and effort in but just need a little point in the right
direction.
What should i be looking at first? Working out mySQL or
learning .php? Ive seen a lot of talk about installing apache
servers and installing php5 but i know absolutely ZERO about this.
If you had to learn it all again where would you start?
Ive got a G5 ,DW8 and a web host that supports mySQL. I have
a bit of experience building websites and am just getting to grips
with CSS. Do i need anything else?

gareth:
You may want to change this -
Whether your new to web design,
to this -
Whether you're new to web design,
and this -
The PHP Login Suite has a comprehensive 82 manual
to this -
The PHP Login Suite has a comprehensive 82 page manual
Meanwhile, I am examining the details of this product
carefully! 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"gareth" <[email protected]> wrote in message
news:e2o095$kco$[email protected]..
>I would learn the basics of PHP first, then start looking
at working with
> databases once you`ve got to grips with the basics.
>
> If you want to learn to create E Commerce sites, then
its going to give
> you
> a huge advantage if you learn to hand code rather than
relying solely on
> Dreamweavers server behaviors to do everything for you.
>
> Installing Apache and PHP is a good idea, as it allows
you to test your
> code
> locally. I have some guides at:
>
>
http://www.dreamweavermxsupport.com/index.php?type=article&pid=39
>
> Getting a bit old now, but still relevant :-)
>
> There are a huge number of tutorials on the web to help
with learning PHP,
> the home of PHP www.php.net is an essential bookmark.
There are also a
> large
> number of good books out there that will help you.
>
> Gareth
>
http://www.phploginsuite.co.uk/
> PHP Login Suite V2 - 34 Server Behaviors to build a
complete Login system.
>
>

Php, mysql, apache, windows xp

I use the most recent versions of php, apache, mysql and
windows xp. And I use Dreamweaver 2004MX.
I create a very simple index.php and when I preview on a
browser, the address becomes like this.
http://localhost/artgallery/TMP2zjuplef9z.php
instead of index.php at the end in the browser address.
Each time when I preview it, it create random address at the
end instead of index.php.
Why does it create like this? Is there anything I can fix
this?

However, doing this will prevent your root relative links (if
any), and
server-side includes (I think) from rendering properly in
preview.
My suggestion would be to ignore it for you local previews.
It's how DW
works.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Nancy - Adobe Comm. Expert" <[email protected]> wrote
in message
news:f7mq70$esk$[email protected]..
> Edit/Preferences/Preview in Browser. Uncheck the "create
temporary files"
> checkbox and restart Dreamweaver.
>
>
> --
> Nancy Gill
> Adobe Community Expert
> Author: Dreamweaver 8 e-book for the DMX Zone
> Co-Author: Dreamweaver MX: Instant Troubleshooter
(August, 2003)
> Technical Editor: Dreamweaver CS3: The Missing Manual,
> DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
> Mastering Macromedia Contribute
> Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced
PHP Web
> Development
>
> "shinceciokada" <[email protected]>
wrote in message
> news:f7mm6c$ai7$[email protected]..
>>I use the most recent versions of php, apache, mysql
and windows xp. And I
>>use
>> Dreamweaver 2004MX.
>> I create a very simple index.php and when I preview
on a browser, the
>> address
>> becomes like this.
>>
http://localhost/artgallery/TMP2zjuplef9z.php
instead of index.php at the
>> end
>> in the browser address.
>> Each time when I preview it, it create random
address at the end instead
>> of
>> index.php.
>> Why does it create like this? Is there anything I
can fix this?
>>
>>
>
>

How do I set the mailhost attribute in Messaging Server 3.5?

Intent of the hostname aliases feature: 
In Messaging Server 3.5, the hostname aliases feature is designed to facilitate migrating and co-hosting. For
instance, if you set up all of your sales and marketing users on one Messaging Server, but suspect that you'll
want to split those groups in the future, you can give the sales users the mailhost value sales.company.com and
the marketing users the mailhost value mktg.company.com. This feature can also be used for fast failover if
you want to be able to move a group of users quickly from one Messaging Server to another.

How to use hostname aliases and how to set mailhost and MessageHostName settings: 
Each user's mailhost attribute can have only one value. All users on a single Messaging Server do not need to
have the same mailhost value in the LDAP directory. The user's mailhost value should match one of the
MessageHostName attribute values in netscape.mail.conf. (On Unix, the path to this file is
/etc/netscape.mail.conf. Windows NT users must use Notepad to create this file in
server-root\bin\mail\Server\etc, where server-root is the base directory where your SuiteSpot servers are
installed.)

With Messaging Server 3.5 and later, MessageHostName can have multiple values. Think of hostnames as
colors. Each mail account in the LDAP server has a single color. Each Messaging Server has one or more
colors. A Messaging Server will check an LDAP account's color (mailhost) against its own color(s)
(MessageHostName), and if they match, the server considers the account to be local. 
For example: 
MessageHostName=red.company.com,green.company.com,blue.company.com
 where original-host-name is the machine's real name. This entry must come first as the server uses the first
entry to generate machine specific postmaster forms. The subsequent host names can be any values that you
wish separated by commas that are inside the brackets. Do not place spaces anywhere on the line.

In this example, if the mailhost setting for the user is set for either red.company.com or green.company.com, or
blue.company.com, the server will consider the user to be local. (Hostname aliases must also be configured in
DNS. Please see the DNS section at the end of this technote.) No other Messaging Server should list either
red.company.com or green.company.com or blue.company.com in the MessageHostName field. Mail could
not be delivered properly if either red.company.com or green.company.com or blue.company.com were listed
in any other server's MessageHostName field. A user with a mailhost setting of violet.company.com would not
be considered local to this machine.

Although it is possible with Messaging Server 3.52 to list more than 16 different host names in the
MessageHostName field, it is not recommended because increasing the number of hostnames in this field beyond
16 will have a negative impact on performance. This feature is intended to provide fast failover and/or
migration of users. If users need to be divided up into many smaller groups, the use of some other LDAP
attribute is recommended.

In Messaging Server 3.0, you can associate a server with only one host name. Consequently, all mail accounts
on a given server must have the same mailhost value in the LDAP directory. This should be the name of the
server, i.e. host.company.com

</A>A note about DNS
Hostname aliases must be configured in DNS. This is done with a CNAME record. For example:
A 128.101.101.101
CNAME

Additional MX records are not required to use hostname aliases.

If you aren't sure about how to configure your DNS records, consult the book DNS and Bind by Paul Albitz and
Cricket Liu.

You can find the connection settings in Tools > Options > Advanced : Network : Connection
See "Firefox connection settings":
*[[Firefox cannot load websites but other programs can]]

How do i set up a PHP,MYSQL,Apachie server on my macbook

Similar Messages

Maybe you are looking for