How do I set up Airport Extreme with cable modem and router?

Hi--
I'm having a house built and all of the wiring for TV, phone, and internet will be centralized in a closet. The cable modem can be placed there as well. In one room in the basement I want to use my Airport Extreme for my iMac and USB external hard drives. In another location of the basement, I'd like to set up a Time Capsule for another desktop and USB printer. If the cat5e comes out of the wall at each location, I "think" I need a router at the closet location. I also thought I might need an Airport Express upstairs on first or second floor to boost signal for my laptop. The house isn't that big so maybe that's overkill. So beyond the router question, do I want to set up a roaming network and have the Airport Express connected via ethernet or just wireless if the thought is that I need this? Finally, if I should connect cable modem to router to Airport Extreme, Time Capsule, etc., in what order and ports does the equipment get connected? Many thanks!!

Welcome to the discussions, Forum Girl!
It would be best to position the cable modem and main router in the central location like the closet if possible. The other devices would connect via ethernet to the wall jacks in each room.
If you could setup a "roaming" wireless network as you mention, this will give you better wireless performance and coverage. This is the way commercial establishments like airports, businesses, etc. are configured for wireless.
The order of connection would go something like this: ethernet connection > cable modem >main router>devices. Devices could be computers, routers, a backup device, etc. Since the Extreme has only 3 LAN ports for ethernet connections, you will also need to plan to install an "ethernet switch" near the location of the main router to provide enough ethernet jacks. If you are planning to use DirectTV, etc or your audio/video devices require ethernet connections (most new products do for updates and extra features), be sure to plan for that as well.
Make sure that CAT5e or CAT6 wiring is run so you will be able to take advantage of faster gigabit speeds.
Finally, it would be a good idea to work with an IT specialist to go over your plans to make sure all the bases are covered. This would be money well spent.

Similar Messages

AirPort Extreme Cisco cable modem and router

Hi all,
I have a Cisco cable modem/router which is being connected to an AirPort Extreme without any problems. I disable DCHP on the Cisco and connected to the WAN port of the AirPort with an ethernet cable.
Now I have a home office with several computers, nas drive, etc and the configuration is somewhat complex to have it messed up. I share a house with another two and while I was away for the weekend one of them decided to wipe off all my AirPort Extreme configuration.
I don't wanna go throught that again so I'm looking for options to having two separate wifi networks, one for home users (Cisco) and my office (AirPort). Since I can't run a cable between them, how can I get internet connection on the AirPort from the Cisco? I don't think joining/extending the wifi from the Cisco is an option since I want two separate wifi networks.
I've somewhat managed to get it working by using a Netgear WNCE2001 to connect wirelessly to the Cisco and to the AirPort with a network cable. The AirPort is then set up to create a new wireless network, configured as DCHP only with a range different than the Cisco. Everything works fine apart form the downloading speed goes in waves, really slow. Upload speeds are fine though. If instead of the Netgear WNCE2001 I connect both routers with a network cable everything is perfectly smooth (same settings on both).
All I can think of is one of those pairs network-through-mains and hope they do the job connecting both.
Is there any other way to have two separate wifi networks sharing the same interrnet connection?
Many thanks for any help you can give.

Thank you for your answer, I'm ordering a set of these http://www.amazon.co.uk/gp/product/B004INVKP4/ref=oh_details_o00_s00_i00?ie=UTF8 &psc=1 and hope they do the job.
I'll get back and tell if they work, might be helpful for others.
Thanks again.

How do I Set up airport extreme with existing fios wireles network

Hello al, l I have an existing wireless network with an arcitonic wireless router provider with my fios tv. Everything is working well. Now I want to add airport extreme to increase my network range and later add apple tv /net flicks I,m not great with this stuff. Some wold be great.

You will need to establish a permanent Ethernet cable connection from one of the LAN <-> ports on the Fios router to the WAN port (circle of dots icon) on the AirPort Extreme and then configure the AriPort Extreme to "Create a wireless network".
You can configure the AirPort Extreme to provide another separate wireless network if you wish, or if you assign the same wireless network name, and use the same security setting and password that the Fios is using, the Extreme will provide more wireless coverage....and you won't have to change wireless networks to connect to the wireless on the Extreme.
Follow the guided setup using AirPort Utility to "create a wireless network". The setup will suggest that you configure the AirPort Extreme in Bridge Mode, which would be the correct setting when used with the Fios router.

How do you set up airport extreme with a windstream all in one modem with the wireless router built in

I have a wireless network that I want to extend so there will be wifi coverage all over the whole house. I want to use the airport extreme to do so. so far all i can get to work is the airport making another network via a eithernet cable that is pluged into one of the ports on the windstream wireless router/moden (all in one you plug the phone line into this and it has the wireless built in) and the other end is in the WAN port of the airport. I guess the real question is do I need to change any settings on the windstream wireless router/modem to do so. Every time I select all the options to extend a network wirelessly I keep getting errors.

The Airport Extreme can not wirelessly extend a 3rd party router, it can only extend another Apple router. If you can somehow keep the two connected via ethernet, you can setup a roaming network. A roaming network is essentially "extending" your network by using an ethernet cable to bridge the two routers.

Set Up Airport Extreme with Static IPs and DHCP same time

I have Verizon Fios to my Business with 5 Static IP Address. One of them must be assigned to the Airport Extreme Base Station. I have 5 iMacs needing internet connection of which 2 need to use a static ip,( Filemaker Server and my Mac OS X Web Server). I also use 2 iPhones with a custom App accessing that FileMaker Server via the internet too. I want to set up my Airport Extreme Base Station to have those 2 iMacs connected with static ips , which must NEVER CHANGE, via an ethernet cable and all the rest wireless with WiFi. Do to the size of my building I also want another Airport Extreme or Express to just expand the range from the Base Station for the wireless connections only. Looking at the Airport Internet Settings I only see 3 options for Connection Sharing, "Share A Public IP Address", "Distribute a range of IP addresses", "Off (Bridge Mode)". I'm thinking I need to give 1 IP Address to the Base Station, 2 ip addresses to my servers, then 1 ip address to share for my wireless DHCP connections. The additional Airport set to Off(Bridge Mode) to expand the base station. Please advise on how I would set up that base station to do this.

With respect to expanding the base stations range, in the Base stations Wireless Settings I would click to select "Allow this network to be extendeded". Then what settings would I need in the Additional Airport?
Note: Both AirPorts would have to be 802.11n models in order for this to work. The additional AirPort would need to be configured to extend the Extreme. (ref: AirPort Utility > Manual Setup > AirPort > Wireless > Wireless Mode = Extend a wireless network)
Would that NEED to be connected to the base station via ethernet cable or will it pick up the base station wirelessly?
Using the "extend" feature is intended to expand the wireless range of an AirPort with another wirelessly. You would not need to connect them by Ethernet. In this configuration, the additional AirPort would be in bridge mode and will pass through the IP information from the other base station's DHCP service.

Problems setting up Airport Extreme with RCA Modem

Can't seem to get wireless working with my Airport Extreme. I have an RCA Modem (DHG535-2) through Comcast. I can get internet through Airport via ethernet, but only when the AEBS is in "Bridge" mode. I have tried unplugging, rebooting, etc., but nothing. The most common error message I'm getting is that the AEBS doesn't have a valid IP address. I'm pretty sure I should be selecting Use DHCP, but I'm not sure whether I need Share IP address, Distribute or Bridge. Also, when I connect via the ethernet, it looks like the IP address changes every time I reset the connection. Is this normal? I don't believe I have a unique IP address or else Comcast probably would have told me.
I've also tried resetting the AEBS to no avail. The modem does not have a typical reset button, but rather one called "REBOOT EMTA", which has kept me away from pushing it, ha! I'm very disappointed with the AEBS. I hardly ever have issues with Apple products. Any help would be greatly appreciated! Would hate to have to replace the Airport with my old blue Linksys router.

I'm not at home so I can't look at my own setup, but for my cable modem, I also have an RCA Modem (about two years old). I have it set to just get the IP address automatically, which it did the first time I plug in an Airport Express to it. I just upgraded to a Time Capsule, and all I had to do was turn the modem off and on, and it automatically works.
I would start over and try again.
Also, to reset my Airport Express to factory settings, it has a small button on the bottom that I just hit (with a tip of a pen) for five seconds and it resets. I would think the AEBS has something like that?
Good luck!

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro. What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
NOTE: If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did. He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse.
THIS IS WHAT YOU WILL NEED TO DO:
First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up. If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it. Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
Wireless Security will be -> WPA/WPA2 personal or just WPA2
Enter the Wireless Password you want
Verify the Wireless Password (enter it again)
After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow. Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green. If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green. Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How to set up airport extreme with TPG ADSL2 ?

How to set up airport extreme with TPG ADSL2 ?

I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
I have a Linksys WRT320N I used for the initial Charter setup.
I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
Hasn't caused any issues so far but one thing I did notice.
On the Linksys there were 3 DNS servers listed.
The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
I tried everything above, but light on modem still flashes yellow.
I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network?

How do I add an Airport Extreme with Time Capsule to an existing non-Apple network? I have an ISP provided wireless Router that has to remain as the base station. I am able to join my 1/2TB Airport Extreme and Airport Express to the network, but I can't access/use Time Machine.

One option would be to connect the Time Capsule (TC) to the ISP-provided wireless router by Ethernet. You can then configure the for a roaming network. Then, depending on what your goal is for the AirPort Express, you can either: 1) Add it to roaming network, 2) Configure the TC & the Express for an "extended" network, or 3) Configure the Express to "join" the roaming network for AirPlay.

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

Am replacing airport extreme with Time Machine and want to upgrade from Tiger to Snow leopard. Am told I should manually back up into T Machine before OS update but set up utility won't allow anything with OS below 10.5 and I'm 10.4.11. What to do?

I think you mean you are replacing your Airport Extreme with a Time Capsule. Time Machine is software integrated into OS X 10.5 & 10.6 used to automatically backup a system to an external HD. Time Capsule is an Airport Extreme that has a hard disk integrated into it that can be used for storage or as a Time Machine backup drive.
Because you are currently on Tiger 10.4.x you can backup to a external HD using SuperDuper or Carbon Copy Cloner. Having a backup is very wise before doing any major system update. After you have created the backup and have successfully upgraded to Snow Leopard you can still use the external HD for many things. The strategy I'd recommend is to use the new Time Capsule as your Time Machine backup and then use the external HD as backup using SuperDuper or CCC. Redundant backups is wise because backups can (and do) fail too! In addition both SD and CCC are bootable clones, this is useful in that if your internal HD crashes you can boot from a cloned drive and continue working until the internal HD is replaced.
Below are some links to some articles from MacWorld, I would recommend reading them where you find a common theme, redundant backups. Backup Plan I, Backup Plan II & Backup Plan III.
Roger

How do I set up Airport Extreme to work with Steam?

Hey all,
I bought an Airport Extreme the other week, and since then I have been unable to log onto Steam either through OSX or Win 7 Bootcamp. Since Steam worked fine with my previous router, a basic Thompson version, I'm assuming that I have to setup port forwarding or some such in the Airport app, but after googling the question I haven't found any answer that worked.
Has anyone had success in setting up port forwarding (or similar solutions) for Steam?
Thanks in advance!

I have Steam and did not have to map any ports in order for it to work. However, Steam does provide a support site that indentifies which ports would be required if you want to pursue this.
If you need assistance with how to configure these ports on the AirPort Extreme, please post back.

How do I use my airport extreme with my FIOS router?

How do I use my AirPort Extreme base station with my FIOS Router to extend my network? I have hard disks connected to my AirPort Extreme and would lik to access them.

Probably can't answer all your questions - but.... I use a Linksys (wired and wireless) router as my primary entry point for FIOS. I use a Time Capsule and an Airport Express as a common wireless connection. So I have two visibile wireless networks and use them both depending on where I am in the house. Both the TC and AEx can be seen either wirelessly or wired from the entire network. Note - the Linksys provides all the DHCP - you set the apple routers as "bridge mode."

How to connect to dsl airport extreme with built in modem

Hello everybody,
while we were tiding our cellar, i found an old airport extreme (a1034) with a built in modem, but i aint able to connect to my isp.
I looked throug the manual, but i didnt got answers there (maybe because of my poor english) . Is there a tutorial out there which tells me
how to connect to my isp?
Regards Floh
PS: again sorry for my poor english

If you try to set up the new AirPort Extreme with AirPort Utility 5.6.1, you will receive a notice that you need a more up to date version of AirPort Utility.
Nevertheless, AP 5.6.1 will allow you to set up the basics....wireless network name, password, etc.
It will appear that you can change other settings that are not found in more recent versions of AirPort Utility, but if you go in and check using a newer version of AirPort Utility, you will find that the settings that you thought you had made have not "stuck".
For example, you want to change the Radio Mode on the new Extreme and not use the Automatic setting. AP 5.6.1 will appear to let you do this. But, if you check the setting using a more recent version of AirPort Utility you will see that the setting is still set at "Automatic".
So, the bottom line here is that unless the newer version of AirPort Utility has the specific setting that you want to change, you will not be able to make that change.
Is there ANY chance, to set up my new "towers" with more
options, than the current Airport Utilities do offer?
Unfortunately, no.

How do i connect my airport extreme with my airport express

how do i link my Airport Express with my Airport Extreme?

Hello Bob -
I have an Apple Extreme (5th Gen) and I have tried to extend my network with an Apple Express Model No. A1264 with the ethernet connection. It does not seem to work, and has crashed my network twice. When I did get it to work, the wireless crawled. When I took the AirPort Express off of the network the speed went back up.
Can this be done to extend the network, as I have the Extreme in the basement where the cable comes into the house, and I have two other floors that need wireless access. Any suggestions for this older model AirPort Express?
Thanks.

Trying to set up airport extreme with a dsl modem and get DSN server not found message . Get a green light on airport but no internet modem and get

Am attempting to set up a Wi Fi network with an airport extreme. Get most of the way through the setup (have a dsl modem) but get an error that it cannot connect to the internet. Says I have a problem with a DSN server and asks for what appears to be a series of numbers. I had an old airport express working for some time and never saw this.
Decided to upgrade since the express was not powerful enough to work in the whole house.

It is always a good idea when changing out networking hardware to perform a complete power recycle of all of your networking gear.
Please try the following:
Power-down the modem, AirPort Extreme Base Station (AEBS), and computer(s). Leave them powered-off for at least 10-15 minutes.
Power-up the modem; wait at least 10-15 minutes to make sure that is has enough time to initialize.
Power-up (plug into power) the AEBS; wait at least 5-10 minutes or until its status light is a solid green. (Note: The status light may continue to flash amber after this timeframe. This is ok as it may just be letting you know that some additional configuration items need to be taken care of like setting up wireless security.)
Power-up the computer(s).
Computers connected to the AEBS by either wire or wireless should now be able to access the Internet. Please post back your results.

How do I set up Airport Extreme with cable modem and router?

Similar Messages

Maybe you are looking for