How do I set up an emulator for testing my application?

I'm starting to wade into GPIB and cannot seem to find the best way to continue given all the components (not meaning ActiveX) required to assemble a semi-reliable development and testing environment for beta rollouts.
I have set up my design environment. Now I need a way to emulate some of the equipment I will be developing for so that I may test my apps before final testing on the actual equipment (which I obviously have no access to at this point).
Given that.. am I correct in understanding that LabView or IVI allows this type of functionality? If so, here are my specific questions regarding development:
1) Do I currently need any hardware or can the GPIB device list be populated from IVI/LabView emula
tors? In other words... how do I make the 'link' between these two technologies?
2) Can IVI/LabView run on the same machine as my test application, or is a secondary machine required?
3) Is there a general punch list of software (LabView, etc.) I might need in order to get this going?
4) Any general (or specific) overviews that may help me get over this hump would be greatly appreciated.
Charles

Whether or not you are able to simulate your hardware will depend on what method you are using to program it. If you are programming the instrumentation directly using the GPIB ActiveX control or GPIB calls directly you will not have the ability to do simulate in software. If you are using an instrument driver, however, you will be able to do simulation if the instrument driver is IVI compliant.
Assuming that you are using an IVI-compliant instrument driver, here are the answers to your questions:
1. You do not need any hardware whatsoever. You can either specify to use simulation in your code by using the InitWithOptions functionality and specifying "SIMULATE=TRUE" in the option string parameter. You can also set things up externally so that you can alter simulation strictly through the IVI configuration so that your code doesn't have to change.
2. It will run on the same machine as your code. As far as your application is concerned, it will not appear any differently however no GPIB communication will occur.
3. IVI compliant instrument drivers for all of the GPIB hardware you are using. These are available for download from ni.com.
4. I think that there may be some IVI-related application notes.
Assuming that you are not using an IVI-compliant instrument driver and instead are either using a non-IVI instrument driver or making GPIB calls directly, things can get a little more elaborate. If you want full emulation capability you'll need to write another piece of software that emulates your device. This can be done in LabVIEW or any other ADE of your choice. What you'll need is a second GPIB card (to act as your device) that you'll cable to from your main computer. That card can live in a second machine or in the same one as your main application. You may want to put it in a separate test machine just to keep things a little cleaner.
If you go with this approach, it's not too difficult to write an emulator for a single device (or at least that functionality of a device that you use) per GPIB card. It will be more difficult to write an emulator that emulates multiple devices using a single GPIB card. In other words, you may want to use a separate GPIB card for each instrument you want to emulate. I wrote such an emulator some time ago but can't seem to find it. In any case, it's probably only a couple of days effort.
To make a long story short, your life will be a lot easier if you have IVI-compliant instrument drivers available for the hardware that you are using.
Jason

Similar Messages

How can I set a version number for an AppleScript application?

Subject kind of says it all... I've written a small application in AppleScript, which is used on several computers. I'd like the application to have a version number, just like normal applications have. How do I give it one?
To be clear, what I mean is: in column view, if you click once on an application, it shows the icon, name, size, version, etc. of the application. I want a version number to show up there (and in the Get Info window, etc.)

Posting to this old post, but I am trying above method on my 10.8.2 machine and it doesn't seem to work.
I added the bundle version string as in the attached image.
Recompile my app, saved it but still version info doesn't show up in finder.
Also, tried to change "Bundle version" to "CFBundle version". But still didn't work.
Any suggestions?

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

How do I set the aspect ration for 4:3 or for 16:9?

How do I set the aspect ration for 4:3 or for 16:9 in Adobe PE12?

PulcinellaNM
What computer operating system is your Premiere Elements 12 running on? Have you updated from 12 to 12.1 Update via a project's Help Menu/Update? If not, please do so. That is all background information for now.
As for the question that you are posting....
I think we need to go a lot deeper into what you are doing. Here are some considerations
The aspect ratio setting is in the import settings. In Premiere Elements 12 Expert workspace, the project automatically sets the project preset based on the properties of the first video file that you drag to the Expert workspace Timeline. If your video's properties include a 16:9 flag, then the project settings will have a 16:9 flag (aspect ratio). If you do not want the project to set the project settings automatically, you can set the project settings yourself manually with File Menu/New/Project and then import your source video.
If a problem exists where imported 16:9 video is presenting in Premiere Elements as 4:3 instead of 16:9 (typical of the JVC .mod file issue), then you can set the pixel aspect ratio under Interpret Footage feature inside the project workspace.
At this point, I think it best for you to give more details and background behind your question so that we can be sure that we are giving you the information that you need to succeed in your projects.
If you need clarification on anything written, please do not hesitate to ask for clarification.
Thank you.
ATR

Apple ID for my 9 year old - How can I set up an ID for my 9 years old. We have bought him an ITouch for his birthday, he also has a $30 iTunes card. To load up the iTunes card he needs an ID. When I try to set him up it says he is below the min age.

How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my credit card details.
I'm very fustrated with this as it seems the Apple kit is for 13 years and older only.
Cheers
Brad

That's great your 9-yr-old is responsible enough to handle an iTouch!
There's no way around the age limit. I suggest a family account that you, an adult, control.

How can I set a point size for staticTexts

Hi everyone
How can I set a point size for staticTexts?
    staticTexts.add({staticLabel:"Please select a tedious job"});
thanks
Teetan

Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
Thank you Vandy
Thank you pixxxel schubser
And thank you Peter Kahrel
But Ho can call function for this script?
//======================================================================
var stringList = [
"01. digit at end: superscript",
"02. digit at beginning: superscript",
"03. notes applied to italic (table only)",
"04. Initial Cap+ markup",
"05. Small Cap + markup",
"06. del [ ] + markup",
"07. add an EM at beginning",
var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");
this.windowRef = win;
win.grp = win.add ("group", undefined);
win.grp.alignChildren = "top";
win.grp.margins = 5;
win.grp2 = win.grp.add ("group", undefined);
win.grp2.orientation = "Column";
win.grp2.alignChildren = "left";
win.grp3 = win.grp.add ("group", undefined);
win.grp3.orientation = "Column";
win.grp3.alignChildren = "fill";
win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");
win.grp2.Txt1.indent = 0;
win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);
win.grp2.Ddl1.selection = 0;
win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");
win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");
win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);
win.quitBtn = win.grp3.add("button", undefined, "Ok");
win.cancelBtn = win.grp3.add("button", undefined, "Cancel");
win.defaultElement = win.quitBtn;
win.cancelElement = win.cancelBtn;
win.quitBtn.onClick = function() {
win.close();
if (w.show() == 1) {
                var mRes = mStringList.selection.text;
                mSelection = mStringList.selection.index;
                app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                return mRes;
        } else { exit(); }
app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs");
function main(){
var myObject;
var myCheckSelection = false;
if(app.documents.length > 0){
if(app.selection.length > 0){
   switch(app.selection[0].constructor.name){
    case "InsertionPoint":
    case "Character":
    case "Word":
    case "TextStyleRange":
    case "Line":
    case "Paragraph":
    case "TextColumn":
    case "Text":
    case "Cell":
    case "Column":
    case "Row":
    case "Table":
mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set
if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
      tedious_works();
else{
alert("Wrong selection. Please try again.");
function tedious_works() {
app.findGrepPreferences = app.changeGrepPreferences = null;
switch (mySelection.selectedIndex){
       case 1: {
   app.findGrepPreferences.findWhat = "^\\d";
   app.changeGrepPreferences.position = 1936749411;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
            break;
       case 2:{
   app.findGrepPreferences.findWhat = "(?i)\$note.+\$$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "（附[註注].+）$";
   app.changeGrepPreferences.appliedCharacterStyle = "Italic";
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 3:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<a";
   app.changeGrepPreferences.changeTo = "A";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<b";
   app.changeGrepPreferences.changeTo = "B";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<c";
   app.changeGrepPreferences.changeTo = "C";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<d";
   app.changeGrepPreferences.changeTo = "D";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<e";
   app.changeGrepPreferences.changeTo = "E";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<f";
   app.changeGrepPreferences.changeTo = "F";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<g";
   app.changeGrepPreferences.changeTo = "G";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<h";
   app.changeGrepPreferences.changeTo = "H";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<i";
   app.changeGrepPreferences.changeTo = "I";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<j";
   app.changeGrepPreferences.changeTo = "J";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<k";
   app.changeGrepPreferences.changeTo = "K";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<l";
   app.changeGrepPreferences.changeTo = "L";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<m";
   app.changeGrepPreferences.changeTo = "M";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<n";
   app.changeGrepPreferences.changeTo = "N";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<o";
   app.changeGrepPreferences.changeTo = "O";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<p";
   app.changeGrepPreferences.changeTo = "P";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<q";
   app.changeGrepPreferences.changeTo = "Q";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<r";
   app.changeGrepPreferences.changeTo = "R";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<(?<!’)s";
   app.changeGrepPreferences.changeTo = "S";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<t";
   app.changeGrepPreferences.changeTo = "T";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<u";
   app.changeGrepPreferences.changeTo = "U";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<v";
   app.changeGrepPreferences.changeTo = "V";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<w";
   app.changeGrepPreferences.changeTo = "W";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<x";
   app.changeGrepPreferences.changeTo = "X";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<y";
   app.changeGrepPreferences.changeTo = "Y";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<z";
   app.changeGrepPreferences.changeTo = "Z";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
       break;
       case 4:{
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<A";
   app.changeGrepPreferences.changeTo = "a";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<B";
   app.changeGrepPreferences.changeTo = "b";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<C";
   app.changeGrepPreferences.changeTo = "c";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<D";
   app.changeGrepPreferences.changeTo = "d";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<E";
   app.changeGrepPreferences.changeTo = "e";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<F";
   app.changeGrepPreferences.changeTo = "f";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<G";
   app.changeGrepPreferences.changeTo = "g";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<H";
   app.changeGrepPreferences.changeTo = "h";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<I";
   app.changeGrepPreferences.changeTo = "i";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<J";
   app.changeGrepPreferences.changeTo = "j";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<K";
   app.changeGrepPreferences.changeTo = "k";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<L";
   app.changeGrepPreferences.changeTo = "l";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<M";
   app.changeGrepPreferences.changeTo = "m";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<N";
   app.changeGrepPreferences.changeTo = "n";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences.findWhat = "\\<O";
   app.changeGrepPreferences.changeTo = "o";
   app.changeGrepPreferences.underline = true;
   app.selection[0].changeGrep();
   app.findGrepPreferences = app.changeGrepPreferences = null;
   app.findGrepPreferences = app.changeGrepPreferences = null;

How do you set the font color for a specific entire row inside a JTable?

How do you set the font color for a specific entire row inside a JTable?
I want to change the font color for only a couple of rows inside a JTable.
I've seen some ways to possibly do this with an individual cell.
Clarification on changing the font color in an individual cell would be helpful too if
there is no easy way to do this for a row.

hai,
Try out with this piece of code.Create your table and assign the renderer to each column in the table.
CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
for(int i=0;i<your_JTable.getColumnCount();i++)
your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
class CellColorRenderer extends JLabel implements TableCellRenderer
CellColorRenderer()
setOpaque(true);
setHorizontalAlignment(LEFT);
setVerticalAlignment(CENTER);
setBackground(Color.white);
setForeground(Color.black);
protected void setValue(Object value)
     setText((value == null) ? "" : value.toString());
public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
     if(isSelected == true)
          setForeground(Color.red);
     else
          setForeground(Color.black);
     setValue(value);
     return this;
regards,
bala

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big.

How do you set the default magnification for Acrobat. All documents that I open enlarge to 174% and are too big. I see how to change the size after the document is open by going to File/properties/initial view and saving this setting. I want all documents to open at 100% when they are first opened. Can I set this as a default view?

Hey Kris,
You might go to Edit> Preferences> Zoom
Do this without opening any particular PDF so that it applies to the program itself and not just one document.
Try this and then let me know.
Regards,
Anubha

How do I set the default folder for file - open file... ?

When I save a file, photo, etc., the default folder for OPENING a file becomes the last folder I SAVED to - even after closing and reopening Firefox. Is there a way to maintain the same default folder for opening files?
Thanks.

Originally posted by: kwarner.uneedspeed.net
Well... I found over 200 bugs none of which seemed to talk about setting
the default folder. I probably missed the relevant bug in the spew.
I ask a question here as a last resort -- after I've done what I think
is an appropriate search for answers.
But thanks for your help in any case.
Daniel Megert wrote:
> DemonDuck wrote:
>
>> When I need to open a file not in the workspace, I use File -> Open File.
>>
>> But the default folder it opens is in C:\Documents and
>> Setting\Administrator
>>
>> I would like File -> Open File to first open in someplace more
>> reasonable -- like the workspace.
>>
>> How do I set the default folder for File -> Open File ????
>
>
> Is your '?' key broken? Check bugzilla there's a feature request
> regarding your question.
>
> Dani

HOW DO I SET UP MY FAX for a HP PHOTOSMART PLUS B210 ?

HOW DO I SET UP MY FAX FOR A HP PHOTOSMART PLUS B210 EPRINTER ?

Hi shea31,
Unfortunately, this printer doesn't have a fax function. You can also check the printer's product specifications.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Cheers!
* If this post has helped you, the White Kudos star on the left is a great way to say thanks!
* Please mark Accept As Solution if it solves your problem so other users can benefit as well.

How can I set the desktop image for client computers?

How can I set the desktop image for client computers using ARD or terminal?

How can I set the desktop image for client computers using ARD or terminal?

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I set up e print for my laserjet P1102 for Mac

how do I set up e print for my laserjet P1102 for Mac? I have downloaded soft ware & ejected disc as directed & don't know next step. Thanks

Hi,
As you have setup the printer now you should be having the printers IP address.
If not please connect your printer to wifi network with a valid internet network and get the IP address by printing the config page.
Make sure you connect Mac Book to the same wifi network.
Now type the IP address on a browser in your Mac Book and hit enter.
You should be able to see the Embedded Web Server page of your printer.
Now navigate to Web Services Tab.
Click on Enable to enable eprint on your printer.
This will enable the web services on your printer and print the information sheet.
The information sheet will contain the claim code for your printer.
The <Claimcode>@hpeprint.com will be your email ID for the printer.
Kind Regards,
Oliver
"Although I work for HP, I'm speaking for myself and not on behalf of HP"--Please mark the post that solves your problem as "Accepted Solution"
"Say "Thanks" by clicking the Kudos Star in the post that helped you.

How do I set up an emulator for testing my application?

Similar Messages

Maybe you are looking for