How do I set up an MS Stereo Pair in Logic 7?

So we are now dabbling into the MS Stereo pair for our recording tech class and I can't seem to find an easy way of doing this. Any suggestions? I can't find a real time phase inversion plug-in or button anywhere other than going through the wave editor and doing it that way, which doesnt help much. Pro Tools and DP for instance have plug-ins that do the 180 degrees out of phase type switchup. Anything like that in Logic... still can't find one. Is there a free downloadable one that some of you out there prefer? Thanks!
~trevor

I use MS all the time. Put an MS setup in front of the drumkit about 4-6 feet away pointing right between the kick and snare. You can change the width later to taste.
Yes, all you need to do is setup a stereo track and put the direction mixer plug in the first slot with the MS button clicked on. It does all the decoding for you. The only thing you need to make sure of is that you have the inputs set properly. If you've got the inputs set to Input 1-2, you need to have the mid mic on input 1 and the side mic on input 2.

Similar Messages

HELP!! how do i set up my m audio solo in logic?

i have installed all the drivers etc. for the solo, im running it through firewire on my powerbook. i have a mic plugged into the input 1 and i even get a signal in logic, but nothing records and i dont hear what im speaking into the mic .
please help!

Syman wrote:
second, when i click Setup>Set Up Wizard> Email Setup im sure theres meant to be an option to make a new address? but mine only says "i want to use a work email account with a Blackberry Enterprise Server" and when i click next it asks for an activation password ?
That simply indicates that your Vodafone account is not yet provisioned with the BlackBerry Data Plan.
Try this: With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.
Now, try the personal email setup again.
If still no personal email setup, you need to call Voda and get an ETA on the provisioning.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How do I set up iPad with airport express to stream music to stereo without internet connection?

how do i set up iPad and airport express to stream music to stereo without using internet connection.

Your 4th gen iPad does have the necessary software to connect to the AirPort Express but not to administer it. To do the later, you would need to install the AirPort Utility applet.
You said that your iPad can "see" the AirPort's wireless network, but can't connect. What happens exactly when you attempt to do so? Do any of your other wireless devices have any trouble connecting to the Express? Did you configure the Express for a closed network ... that is, not to broadcast its Network Name?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

How do I set up a wireless network at home??

Hi,
I am new to Mac's. I want to set up a wireless network at home, but I have not got a clue about AirPort, what it is or what it does!?! I am getting a new Mac, but my wife is currently using a Dell Windows laptop and our daughter is using a Windows PC. How do I set up a wireless broadband network at home which works with my Mac and my familys PC's? What do I need to buy and what do I need to do with them? I already have a broadband connection at home. Currently, my wife's PC is connected directly to the broadband modem (via an ethernet cable) that was supplied by the brodband company when I signed up to broadband.
Thanks for all your help with this.

scooter has provided links to Apple's pages for the AirPort Express and AirPort Extreme base station (AEBS).
Both of these devices are IEEE 802.11g wireless routers (also called base stations). If you have an Ethernet connection to the Internet (for example DSL or cable modem), you can connect either of these devices directly to that connection and create a wireless network. Since Ethernet and IEEE 802.11g are worldwide standards you can connect any compatible device (including PCs running Windows).
Every computer needs a unique IP address. You can think of an IP address as a street address for your house. A unique address guarantees that items addressed to you get to you.
Typically ISPs provide users with a single (one) public IP address. A public IP address is visible to anyone on the Internet. A router uses the single IP address provided by the ISP and creates multiple local (non-public) IP addresses for you computers. This allows you to use multiple computers.
If you need to connect both wireless and Ethernet computers you will need the AEBS. The AEBS provides a separate LAN port for Ethernet computers.
BTW, you can accomplish the same thing with any inexpensive wireless router.
The advantage of the AEBS over other routers is (a) built-in 56k modem for connecting to a dial-up ISP and (b) USB port for a single compatible printer.
The advantage of the AirPort Express over other routers is (a) sound output port for streaming music to a stereo and (b) USB port for a single compatible printer.

With 10.2 I can only use system speaker output for audio, NOT my RME FF400 I used previously. The FF400 works fine with other apps. How can I set this device in FCP 10.2? (it is set in both system preferences and midi)

With 10.2 I can only use a system (e.g. speaker) output for audio, NOT my RME FF400 I used without any problems previously. The FF400 works fine with other apps (some like TwistedWave) setup in the program, and others (like Spotify) using system preferences & audio midi setup. How can I set the FF400 to be the sound output device in FCP 10.2? N.B. The FF400 is set as sound output device in both system preferences and audio midi setup.

From the fcp.co forum. See if this does anything for you.
simon_hutchings
OFFLINE
Junior Boarder
Posts: 24
Thank you received: 5
Karma: 1
I have the solution! Well it at least worked for me. This is the response I got from Apple, Can you please try the following steps towards fixing your audio issue, and report back with your results?
1. Open the application Audio Midi Setup (located in Applications : Utilities)
2. Select the Output Tab for the current output device
3. Select the Configure Speakers option
4. Select the Multichannel tab
5. Change the setting to Stereo Now mine was set to stereo but the left channel wasn't showing left. re-clicking on stereo reloaded the settings and after clicking apply it worked.

How can I export 6 mono tracks and a one track two channel stereo pair in a quicktime as separate tracks?

I'm using Premiere Pro CC 2014 (8.1) and need to export a 5.1 mix as well as the stereo tracks as 7 separate tracks in a quicktime. If I select 8 channels it automatically creates 8 tracks. Also, if I export the the seventh stereo track as mono track won't it play mono?
Thanks in advance for nay help you can offer.
-Sam

Hi Richard and Kevin.
First of all thanks so much for the response and info. Just to clarify, you're saying I will need 8 tracks, 2 of which will be designated for the stereo pair, right? My concern is that I'm supposed to deliver only 7 tracks. They want the stereo pair as separate channels on one track. I'm wondering if I can create a one track stereo pair and put it on a stereo track, then export only the seven mono tracks (plus an empty track). Would the stereo still work?
Thanks for the link to the previous post. I had actually read it and though it was helpful in explaining how to set up the audio tracks I was still confused about the export.
Much thanks,
Sam

How do i make my clips have stereo audio again?

I've been building a project and i'm about half way done. All of my video clips were imported with stereo audio and until now they have been stereo when i drag them down to the timeline, but for some reason, now when i drag them to the timeline they become mono tracks. They are still stereo while they are in the browser, though. Even when i drag a clip that i used earlier in the timeline (when the clips stayed stereo tracks) it comes up a mono track. Did i change a setting? or is there something i'm not doing or doing different? How do i get my tracks to be stereo again?

Do two tracks go to the timeline or one? Are both tracks connected in the path panel at the head of the timeline? Are the clips stereo pairs or dual mono?

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

I have on airport express that is 5 years old, I now have a new wireless router. I want to use the express just for air waving iTunes. How do I set it up?

Hello 84wvu,
It sounds like you want to setup your Airport Express to Airplay music from iTunes. I found an article with steps to help you get this setup:
Connecting to an existing Wi-Fi network, exclusively for iTunes music
AirPort Express used exclusively for AirPlay by setting it up in Client Mode.
Choose this configuration if the computer containing your iTunes library may be out of direct range of the AirPort Express, but is within range of the Wi-Fi network.
How to Set It Up
Connect your AirPort Express to your home stereo or powered speakers.
From your computer, join the wireless network. Use the AirPort status menu in the menu bar on a Mac. On a Windows-based computer, hold the pointer over the wireless connection icon until you see your AirPort network name (SSID), and choose it from the list if there are multiple networks available. Enter the network password, if necessary.
Open iTunes on your computer and choose the AirPort Express(es) you wish to stream music through from the speakers pop-up menu in the lower-right corner of the iTunes window.
I also recommend reviewing the sections titled "Some things you should know about AirPort Express with AirPlay" and "Things to consider before you begin" in the full article:
Wi-Fi base stations: How to set up and configure AirPort Express for AirPlay and iTunes
http://support.apple.com/kb/ht4587
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?

unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups

How do I set up family sharing if all my family members emails are already associated with my iTunes account?

I want to set up family sharing but it won't let me because all the emails are already associated with the one iTunes account we have. I am afraid to delete because my children use that email address for text messaging. How do I set up family sharing if all my family members emails are already associated with my iTunes account?

Hey Wendaroski,
I am not quite sure what you mean by "my family members emails are already associated with my iTunes account" but what you need for each family member is an Apple ID. Yours would be the one for your iTunes account.
If the other members of the family already have an Apple ID you can invite them to join the family group. If not they will need to create one, using their email address. This article shows how -
Set up an Apple ID in iTunes - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

How do I set up IPad 2 and 2-4s IPhones with Apple?

I have a 32 GB IPad 2 and ITunes on my Windows computer and just ordered 2-16 GB 4s IPhones for my wife and myself I have 18.5 GB of data on my IPad, but only want to selectively include some of the applications and music on my IPhones. I have IOS5. Both IPhones will be loaded with appx 10 GB of data, but each will have different applications and music - all which is loaded on my IPad 2 and ITunes on my computer. How do I do this most efficiently?
1. Do I use the same Apple ID# I use now on all devices, or set up a separate one on each device?
2. If I use the same Applie ID# on all devices, should I set up a different ICloud account on each device to keep the backups separate?
3. If I download an album on my IPhone, will either (or both) 1 and 2 allow that album to be downloaded on all of my devices through ICloud?
I was advised that if I have a large music library to make sure the phones aren't set to autosync. Does this sound correct?
I'm trying to get answers to my questions lined up before they I receive them so I know how to best set them up.
Thanks everyone.

1) You can use one id. My wife and I do.
2) Not sure. Sorry. We share one.
3) Yes.
We sync via the cable. We simply select what we want to sync on each device and sync.

How do I set up multiple iMessage emails with one Apple ID?

We have one Apple ID and many family members with iPads, iPhones etc... As it stands we all receive all incoming imessages and this is impracticle moving forward.
Other than setting up multiple Apple ID's how do we set up each user with an individual iMessage address?
I understand how to do this using a phone numbers but cannot stop all users getting imessages sent to the Apple ID email address. I have tried inputting secondary email addresses but get error messages advising "account already in use".
Long story short.....Can I set up all family devices on the one apple ID but designate each member with an individual email address that precludes them from receiving iMessages sent to the "master" Apple ID address?
Phew
Thanks

To my knowledge, yes, this is impossible. Your primary iMessage account is your AppleID account, so as long as you all share the one AppleID, then all messages will appear on all iOS 5 devices using that AppleID for their iMessage account.
The only thing to do is have people set up their own iMessage ID. They can stil then set up unique "receive at" addresses, but these are really additional addresses for messages to go to, and do not get around the fact that the account itself is defined by the AppleID.
P.S. there is nothing stopping you from using the one, common AppleID for the iTunes and app store, then setting up a new one and just using that for iMessage.

How do I set upmy Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both.

how do I set up my Imac to allow using both my computer speakers and a Bose SoundLink system as outputs at the same time. I can use one or the other, but not both. From systems Preferences I must select one or the other. I want both to work all the time.

Hi,
I would recommend you to use 0FI_AP_4 rather using both, particularly for many reasons -
1. DS: 0FI_AP_4 replaces DataSource 0FI_AP_3 and still uses the same extraction structure. For more details refer to the OSS note 410797.
2. You can run the 0FI_AP_4 independent of any other FI datasources like 0FI_AR_4 and 0FI_GL_4 or even 0FI_GL_14. For more details refer to the OSS note: 551044.
3. Map the 0FI_AP_4 to DSO: 0FIAP_O03 (or create a Z one as per your requirement).
4. Load the same to a InfoCube (0FIAP_C03).
Hope this helps.
Thanks.
Nazeer

Have four family members with iOS devices on same account. How do I set up separate FaceTime for each?

Four members of my family have iOS devices. We are all on same account. How can I set up FaceTime so that we can contact each other. Right now it is confusing to use.

Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
 Cheers, Tom

How do I set up an MS Stereo Pair in Logic 7?

Similar Messages

Maybe you are looking for