How do  i set up apple airport express with my wi fi

how do  i set up apple airport express with my wi fi

What is the make & model of the wireless router that is currently providing your Wi-Fi network? What is your goal for the AirPort Express base station? To extend this Wi-Fi network or for streaming iTunes/sharing a USB printer ... or both? Finally which model of Express do you have?

Similar Messages

  • How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly

    I want to extend my wifi off my Time Capsule with an Airport Experess in a part of my house that has no data cable ran to it. How do I do this?
    Thanks

    No more meseges.
    في ٢٦/٠٨/٢٠١٤، الساعة ٢١:٤٥، كتب Apple Support Communities Updates <[email protected]>:
    New discussion activity
    Bob Timmons has posted in the AirPort community.
    How can I set up mhy Airport Express to extend my Time Capsule wifi wirelessly
    Assuming that you have the model A1264 or A1392 version of the Express, it must be located where it can receive a strong wireless signal from the Time Capsule to be able to extend it correctly.
    A good general location would be a point that is about half way between the Time Capsule and other area that needs more wireless coverage.
    You will use AirPort Utility on your computer to configure the Express. An iPhone or iPad could be used as well.
    We can provide more help....if you need it....but we'll need to know what version of AirPort Utility that you are using on your computer....or whether you want to use an iPhone or iPad to setup the Express.
    https://discussions.apple.com/servlet/JiveServlet/downloadImage/2-26506753-46613 2/AboutAirPortUtility.png
    To post a reply, go to the discussion in Apple Support Communities.                                                             
    You are receiving this email from Apple Support Communities. You can change your email preferences in your Apple Support Communities Profile.
    TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM. Cupertino, CA 95014.
    All Rights Reserved | Privacy Policy | Terms of Use | Apple Support

  • How do I set up an Airport Express as a hard wired wifi accesspoint?

    How do I set up an Airport Express as a hard wired wifi accesspoint?

    Please check out the following Apple Support article for configuring your routers for a "Roaming" network. In this case the AirPort Express would be connected back to your other wireless router by Ethernet and configured as a bridge. This would effectively make the Express perform as a Wireless Access Point.

  • I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work?

    I have a linksys WRT54G router that we use as a base. I want to use Airplay using Airport Express and hook up my stereo to it. How can i set up my Airport express without a PC/laptop? I just downloaded Airport utility on my iphone and ipad,will that work? And one more thing about the setup, the linksys router shich acts as a base is in a different room as the airport express which i wanted to use for airplay. So I'm hoping to hook up the Airport express via wireless signal. If i can set it up, can someone pls help me out by posting detailed instructions. Thanks so much!

    The first message that AirPort Utility will display during the auto setup will be that the Express will be confgured to "extend" the network. When AirPort Utility analyzes the network further, and sees that the Express cannot "extend" the 3rd party network, the next message will indicate that the Express is being configured to "join" the wireless network.
    Once the Express is configured, if you later go into AirPort Utility to check the settings under the Wireless tab, you will see that the Wireless Mode is indeed "Join a wireless network".

  • How do i set up my airport express to my pc?

    how do i set up my airport express to my pc. all i see is an amber light flashing on it?

    Hi
    Take a look at this page for general windows info regarding airport express:
    http://www.ifelix.co.uk/tech/airport.html
    Assuming your computer connects to the network you want to allow your girlfriend to access you will find the password you require in your keychain.

  • How do i set up an airport express as an extender for my airport extreme

    how do i set up an airport express as an extender for my airport extreme

    Check these discussions:
    Best bets to extend/boost signals from Airport and AP Extreme
    How to extend and Extreme network using Express

  • How to set up the airport express with a linksys wireless-g broadband router

    I need to know if and how to set up an airport express to use to extend a home wi-fi network. I have AT&T service with a 2WIRE modem. I am using a Linksys wireless-G broadband router. I also have the new Macbook Air notebook. The airport express keeps giving me a blinking amber light even when the ethernet cable (from the modem) connected. Please let me know how to set up an extended wifi network using this system. Any help would be appreciated.

    If that is all that is done, the Express would not provide more wireless coverage.  Instead, it would duplicate the coverage provided by the Linksys and there would be two WiFi systems covering approximately the same area.  As per my above comment, one Express connects via Ethernet to the Linksys.  The second Express provides the extension.
    You must have misunderstood what I was saying.
    Linksys is providing a wireless network.
    The Express is connected to one of the LAN ports on the Linksys router using a long Ethernet cable (or Ethernet powerline adapters)
    The Express is located on the other side of the house, for example.
    The Express is configured to create a wireless network using the same wireless network name, security and password as the Linksys router
    The Express is configured in Bridge Mode
    This has worked quite well for me for years. Computers "switch" from one wireless access point to another smoothly and automatically while they move around the house.
    Although this is an "extended" network, it is technically known as a "roaming" network.
    This is what I was suggesting as a possible alternative without having to buy more hardware.

  • How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

    I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!

  • How do I set up multiple Airport Expresses to connect over ethernet for Airtunes only?

    I am trying to set up an Airtunes network using an Airport Extreme and three Airport Expresses connected together via ethernet (CAT5 cable). At each Airport Express there will be a speaker setup. I don't need/want internet connectivity on the network, but not sure if it is required for setup or not. I have made this work over wifi, using the Expresses to extend the network, but struggling to get this to work over ethernet.
    I would be verry grateful of a step-by-step method to setting this up! I am also looking to set up 6 airport expresses to do the same thing in another location.
    Thanks in advance!

    Thanks for the info.
    I assume that the AirPort Extreme is setup and working at this point.
    Work with one AirPort Express at a time to get them all configured, and then you can locate them where they will be needed.
    AirPort Setup will configure the Express devices to "extend a wireless network" using Ethernet, so they will be broadcasting the same wireless signal as the AirPort Extreme and provide more wireless signal coverage as well.
    I have yet to meet the first person who thought that they had too much wireless coverage, but you would have the option to turn off the wireless on the Express if you wanted. Most users like having extended wireless for their devices.
    Temporarily, move an Express close to the AirPort Extreme
    Connect a spare Ethernet cable from one of the LAN <-> ports on the Extreme to the WAN "O" port on the Express
    Power up the Express for a few minutes
    Hold in the reset button on the back of the Express for 10 seconds and release. Allow a full minute for the Express to restart to a slow, blinking amber light.
    Click the Airport icon at the top of the Mac's screen and wait a few seconds for AirPort Express to appear just under the listing of New AirPort Base Station
    Click directly on the AirPort Express
    AirPort Setup will open up automatically and take a minute to analyze the network, then announce that the Express will be configured to extend the AirPort Extreme network.
    Enter a device name that you want to use....example.....Express1.....and click Next
    AirPort Setup will configure everything for you. Notice that the message will say that the Express is being set up to extend using Ethernet. When you see the message of setup complete, click Done.
    Now you can move the Express to the remote location where it is needed, hook it up to the Ethernet connection there, power up the Express and set up AirTunes on the device.
    AirTunes is enabled by default, to other than make the speaker connection, you won't have much to do on that.
    Set up other Express devices the same way, except assign a different name to each device....example....Express2, Express3, etc.....to keep things organized.

  • Erro 3256 using Apple Airport Express with Windows XP Pro SP2

    I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
    It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
    I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
    exactly the same distance over the same network.
    How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
    I keep getting "unknown error occurred 3256"
    Help please. Do I have to do something to the network? or???
    Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

    Got the error message 3256 after downloaded latest itunes version 8.xx.
    After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
    http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

  • Apple AirPort Express with Airtunes and Netgear WPN824v2 Router

    I'm having some trouble getting the AirPort Express with Airtunes to connect to a Netgear WPN824v2 network.
    Details:
    - Router: Netgear RangeMax Wireless Router WPN824v2
    - Wireless Network Security: WEP
    - Computer: MacBook Pro
    - OS: OS X 10.4.10
    - AirPort card in computer: this works fine - no problems
    - AirPort Express with Airtunes: the setup routine goes OK, but then the unit cannot connect to the wireless network; the light blinks amber.
    Could the problem relate to the password (Hex versus ASCII) or perhaps WEP versus WPA?
    Any / all suggestions welcome. Thanks.

    sonicdubster, Welcome to the discussion area!
    Are you following the directions in KB 302153, AirPort Express: How to join an existing wireless network in client mode?
    Is the AirPort Express (AX) placed in an area where it can receive a good wireless signal from the Netgear?
    Does the AX connect if you disable wireless encryption?
    WPA (or WPA2) is much more secure and less troublesome than WEP. If all of your equipment supports WPA, I would switch to WPA.

  • How do I set up my Airport Express to my Viasat modem, which requires a DHCP connection, without getting a double NAT connection error?

    I have an Airport Express connected to a Viasat 4100 satellite modem. This requires a DHCP connection and is connected to my Airport Express by Ethernet. I then have three computers (two running Mavericks and one running Lion) and two IPhone 5s and an Apple Tv on the network. If the Airport Express is set to DHCP and NAT then the network works and I have internet, but the amber light flashes and I have a double NAT error. If I use it in Bridge mode the airport express goes green but I have no internet. How can I set it up so it works properly? If anyone knows could they please give all the settings I shoud use on the Airport Express as I may have left incorrect setting on it whilst trying to fix the problem. I have checked and it has been confirmed that I cannot change any settings on the satellite modem.

    Go into AirPort Utility, click on the AirPort Express, and click on the "Double-NAT" error. Click Ignore. There's nothing that can be done about the Double-Nat unless you ignore it (no harm) or contact your ISP and get them to change your Modem/Router into Bridge Mode, and even then can't guarantee that you won't get that error.
    Again, best thing to do: Ignore the Double-Nat Error.

  • How Do I Set Up My Airport Express From My iPad 2?

    I just got an Airport Express and found that I can only set it up from a Mac or PC. Am I missing something? How can I set it up from my iPad 2? I plan on using it for traveling, but don't want to lug a laptop along, only take my iPad. It seems that it would be necessary at times to change configurations on the Airport Express at times when traveling. There are always unexpected things to have to account for. Having an Airport Express setup utility app on the iPad would seem to be a necessity. Could someone provided guidance for an iPad only solution? Can someone from Apple please weigh in? Thanks.

    ...Having an Airport Express setup utility app on the iPad would seem to be a necessity. Could someone provided guidance for an iPad only solution? Can someone from Apple please weigh in? Thanks.
    While I am not from Apple, there was a leaked screen shot showing a possible Airport configuration utility in the upcoming iOS5.  As suggested, give feedback to Apple to help ensure that the utility does make it to the final version.
    Until then, or if the utility never makes it, then you can get "travel routers" that use web page based configuration just like the typical home routers from Linksys and others.  I have this model from D-Link, which has been replaced by an 802.11n version.  They're small, although the newer one is larger, but still quite portable.

  • How do I set up my Airport Express and not interrupt my TIme Capsule

    I have ATT UVerse recently installed and have my Time Capsule Router Behind their installed router. I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?

    Hello hbwilli. Welcome to the Apple Discussions!
    I recently purchased Airport Extreme and want to install it as well so I can connect an older Version of a Sony PS3 which doesn't have bluetooth capability via rj45 since the time capsule is no where close to my PS3. Is there a way to install this Airport Express and not mess up the settings of the Time Capsule?
    Yes. You will want to configure the new 802.11n AirPort Express Base Station (AXn) as a ProxySTA. In this configuration, the AXn will join the wireless network created by the Time Capsule and share Internet access through its Ethernet port to the PS3.
    To activate ProxySTA, you must set up the Express to join a wireless network and then enable the Allow Ethernet Clients setting; both settings are located in the Wireless tab of AirPort Utility. The feature should work with any wireless network: a, b, g, or n; and 5GHz or 2.4GHz. (Note that the Express, which ships with firmware 7.3, must also be updated to firmware 7.3.1 for this feature to appear.)

  • How can i use my old airport express with my new imac and wireless hp print

    i just bought my first imac (intel) and a wireless hp printer. i now realize that a wireless connection between my imac and my printer needs a router.
    i have an airport express base station, which is a few years old. I can't find my documentation, so i don't know its specifications.
    how can i find out the specs of the airport express i have and whether i can use it now? it says that it is model a1084 100-240v~ 0.2a 50-60 hz.
    does that tell any knowledgeable people out there about the specs? can i search the apple website by serial number and find the specs?
    thank all of you potential responders ahead of time.

    Hi green jean
    Try this > http://www.apple.com/airportextreme/features/printing.html
    but also see > http://docs.info.apple.com/article.html?artnum=305293
    Dennis

Maybe you are looking for