How do i set up cytanet mail for ipad

How do i configure my ipdad to get my cytanet.com.cy email?

iPad Mail
http://www.apple.com/support/ipad/mail/
 Cheers, Tom

Similar Messages

How do I set up external monitor for iPad

I purchase an Apple vga adapter to connect my ipad2 to an external monitor. When I try to use it the video dispalys, 'no signal'
Any suggestions?

Have you tried restarting the iPad? (Hold down the power button until you get the red "slide to power off", do so, and then press the power button again to start the iPad back up. ) That often fixes the problem.
Hope this helps.

Mail how do i set a read receipt for messages I send

mail how do i set a read receipt for messages I send

Hi Sunny
There's no built-in option, and the workaround is rather complex. I would advise against it, since "read receipts" are not a standard part of the email protocol, and most email clients cannot return receipts or have it turned off anyway.
Matt

How do I set up my mail to automatically reply that we are on holiday?

How do I set up my mail to automatically reply that we are on holiday?

From Mail Help:
You can create a rule to have Mail automatically reply to incoming messages. For example, you can set up a rule that’s triggered by a specific subject so that Mail replies automatically to all messages with that subject.
This feature is useful if you receive a lot of similar messages from an online form on a website, and you want to reply automatically.
To automatically reply to messages:
Choose Mail > Preferences and click Rules.
Click Add Rule and type a descriptive name for the rule.
Set the conditions necessary for the rule to apply to a message.
From the “Perform the following actions” pop-up menu, choose “Reply to Message.”
Click “Reply message text” and enter the text for your reply message.
Mail will include the text you enter, along with the full text of the original message, in the message that it sends.
Mail must be running to automatically reply to messages, because rules aren’t processed while your computer is shut down or you’re logged out. To set up automatic replies while you’re on vacation, ask your email service provider how to set up an out-of-office reply.
Carefully consider the rules you create for sending automated replies. If they’re too broad, you can send messages inadvertently or create message loops (replies to replies you sent). If possible, test the rule.
After a rule has processed a message, the message’s status icon changes to a gray arrow to indicate a reply was sent.

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

How do I set up a mail server and SMTP server to send messages to other mail servers at mavericks

You need to get the settings for your email from your email provider and enter them in Internet Accounts (System Preferences). Many of the common systems are already available, all you need is a password and an email address to set them up.

How can I set up auto respond for email

How can I set up auto respond for email?

Hey there jimmac169,
It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
Mail (Yosemite): Reply to, forward, or redirect messages
Automatically reply to or forward messages
Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account.
Choose Mail > Preferences, then click Rules.
Click Add Rule, then type a name for the rule.
Indicate whether any or all of the conditions must be true for the rule to be applied.
Set the conditions that determine which messages to automatically reply to or forward.
Choose options from the “Perform the following actions” pop-up menu.
Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages.
Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply.
Click OK.
Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules.
Thank you for using Apple Support Communities.
All the very best,
Sterling

How do I set individual sound alerts for multiple email accounts?

How do I set individual sound alerts for multiple email accounts?

Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

How do I set up additional mail storage folders?

I have installed the cloud and my mail storage folders did not import into the IPAD. How do I set up additional mail storage folders?

did not have a mobile me account.
Copied from your previous post.
Waited for the ICloud to come out installed on both the MAC and the IPad. Started an .me account.
Did you have a MobileMe email account first or not?
And regarding your Mail storage folders that you want available on the iPad, mail storage folders from which email account? Since you just created an iCloud email account, any locally stored mailboxes created for another email account must be transferred to the server for your iCloud account for the mailboxes to be available with the account with the Mail app on your iPad. All server stored mailboxes with an IMAP account will be available automatically when accessing the account with the iPad's Mail app, but you must place any locally stored mailboxes on the server first. If you use the Mail.app on your Mac, select an drag a locally stored mailbox under the iCloud desgination in the Mail.app mailboxes drawer to copy the mailbox to the server with your iCloud account.

HT201320 how do i set up read receipts for emails from the iphone?

how do i set up read receipts for emails from the iphone?

That is not a feature of the Mail app. Check with your email provider to see if it's a service they offer.

How can i set my university mailing platform with my ios7 mail

How can i set my university mailing protocol with ios7 mailing app??

You usually need an SSL certificate for universities. Refer to your universities website or talk to your network administrator.

How do you set up to back up iPad notes in iCloud? I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

How do you set up to back up iPad notes in iCloud? I turned on backing up notes in iCloud settings, and it asked me to create a .me account, which I did, but I don't see my notes anywhere on iCloud, and I never received a password for my .me account.

You'll find your notes under Mail in iCloud. There's a separate folder on the left that's labeled notes so you can access them anywhere. And your me.com account will have the same password as your Apple ID (in fact, you can log into iCloud with just your Apple ID, as the two accounts are permanently linked).

Cannot set up AOL mail for iPhone

How can I set up AOL mail to receive on my iPhone in the "All Inboxes" location. I have deleted my old AOL account and added a new one with same user name and updated password but I receive the message that "wrong username or password for imap.AOL.com"

Contact AOL customer/technical support.

How do you set up Port Forwarding for ARD 2.2 in AEB N?

Help,
I'm a novice at Apple Remote Desktop (ARD) - not an IT guy, so it has to be pretty basic and detailed.
How do you set up Port Forwarding for ARD 2.2 on the Apple Airport Extreme BS router, 802.11 N. I have one at each end of the internet connection. At one end I have an Airport Extreme N router with 2 macs and eventually 1 windows XP machine (if I can) that I would like to be able to connect to over the interenet (the clients) and at the other end, I have a Mac with ARD 2.2 installed also with an Airport Extreme N router. Note: Both routers use Static IP addresses and all computers use static IP's internally not through DHCP. What are the settings or directions to do this.
I have read and printed out the directions for Configuration of ARD 3.0 that are posted many times in the ARD discusion group, but it uses a Linksys router ( http://www.starkpr.com/ard.htm posted by Dave Sawyer). The Mac router is different, particularly with the place to set a Private IP address. I'm not sure about alot of things, but especially about the Private IP address, what number do I set it to, the one that is in my Network connections list? It automatically changes to a different number in AE N setup for Port Forwarding (by one) as if it is not suppose to the same?????
Are there any directions available that are as straight forward for the Airport Extreme N router, as the one's that are listed here for the Linksys Router's? ( http://www.starkpr.com/ard.htm )
Any and All help will be greatly appreciated.
P.S. I know I should have 3.0 but bought 2.2 just weeks before 3.0 came out and they would not give me an upgrade price, so I'm waiting for 4.0 to upgrade.
Thanks,
Jim

Try the following for each AirPort Extreme ...
AEBSn - Port Mapping Setup
To setup port mapping on an 802.11n AirPort Extreme Base Station (AEBSn), either connect to the AEBSn's wireless network or temporarily connect directly, using an Ethernet cable, to one of the LAN port of the AEBSn, and then use the AirPort Utility, in Manual Setup, to make these settings:
1. Reserve a DHCP-provided IP address for the host device.
Internet > DHCP tab
o On the DHCP tab, click the "+" (Add) button to enter DHCP Reservations.
o Description: <enter the desired description of the host device>
o Reserve address by: MAC Address
o Click Continue.
o MAC Address: <enter the MAC (what Apple calls Ethernet ID if you are using wired or AirPort ID if wireless) hardware address of the host computer>
o IPv4 Address: <enter the desired IP address>
o Click Done.
2. Setup Port Mapping on the AEBSn.
Advanced > Port Mapping tab
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s): 3283
o Public TCP Port(s): 3283
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s): 3283
o Private TCP Port(s): 3283
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5900
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5900
o Click "Continue"
o Click the "+" (Add) button
o Service: <choose the appropriate service from the Service pop-up menu>
o Public UDP Port(s):
o Public TCP Port(s): 5988
o Private IP Address: <enter the IP address of the host server>
o Private UDP Port(s):
o Private TCP Port(s): 5988
o Click "Continue"
(ref: "Well Known" TCP and UDP ports used by Apple software products)

How can i set the alternating colors for a table rows

Dear All,
Please any one help me how can i set the Alternating colors for Table Rows.
i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

Hi,
The design property in Table properties should work for your requirement. Select "alternating" value for design.
Please see the API below:
design
Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
alternating - The table rows are displayed alternately in a different color.
standard - The table background has one color. The individual table rows are displayed with grid net lines.
transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
Regards,
Jaya.
Edited by: VJR on Jun 17, 2009 6:43 PM

How can I set up my Mac for two users to share photos, music etc

How can I set up my Mac for two users to share photos, music etc?

On the Mac with the libraries you want to share:
iTunes Preferences click on the Sharing tab and put a tick in 'Share by library on local network'.
iPhoto Preferences click on Sharing and put a tick against 'Share my photos'.
When launching the same apps on other Macs on the network the libraries should be available, listed on the left.

How do i set up cytanet mail for ipad

Similar Messages

Maybe you are looking for