How do I set up different hardware controls for different patches in mainstage?

I'm using Mainstage 3.0.4 and a Novation Impulse.
I created a concert, with the drawbar organ as my first and most important patch. I assigned the hardware controls on the Novation exactly how I wanted them, with the sliders controlling the drawbars, and the rotary controls changing the distortion, reverb, etc. It was perfect. I was happy.
Then I added a new instrument (a new patch, not a new channel or anything like that), a Wurlitzer. Once again I assigned my hardware controllers as I wanted them, and was happy with that.
When I saved the concert, and went back to my organ patch, my settings didn't stay the same, but they still work for the Wurli.
My question is this - do I have to have a new concert for each instrument patch I want to use, if I need to assign different controllers for each patch? This would be stupid! If not, what I am doing wrong, that I can only set up one set of hardware controls per concert, instead of per patch?
Thank you in advance for the help!!!

Hi
matthewabennett wrote:
CCTM, thank you! I have a small idea what you mean, but I still can't implement it :-)
You have some fundamental choices:
A) If you want to see Drawbar Controls for organ Patches, and then have other types ( knobs/sliders etc) for other Patches, you could simply make all the screen controls you need, then assign and map them as required.
B) you could simply use drawbar screen controls only and remap them to other parameters for non-organ patches
C) You could use Smart Controls ( which will update their appearance in a 'smart' way
D) You could make your own Drawbar type controls using standard faders
The basic process in a 2 part thing:
Assign incoming MIDI messages from your controller to Screen Controls in Layout mode. This is global for concert. Per patch ( or Set or globally for the Concert) you then map the Screen Controls to parameters for each patch as needed.
Smart Control MIDI assignment is done in the Assignments and Mappings pane
CCT

Similar Messages

How do I set up timed access control for a time past midnight

I would like to set up timed access control for a number of my devices that would stretch past midnight... An open network from 6AM to 2AM - effectively only blocking access from 2AM tp 6AM in the morning....
Any notion on how to do this? the timed factily does not like the setting to enable 6A to 2A, says the times are invalid.
Setting up timed access from 6AM to 11:59P, then doing another from 12A to 2A causes a service "hiccup" of 1 Minute.

Set up each device as follows:
Everyday........Between.......6:00 AM and 11:59 PM
Add a second rule for each device that will state....
Everyday.....Between.......12:00 AM and 2:00 AM
You might think that there would be a one minute break between 11:59 PM and 12:00 AM, but that will not be the case, at least on every AirPort that I have ever programmed.. Reason.....11:59 is really 11:59:59:59 turning off at 12:00 AM. But, you have a second rule to allow access at 12:00 AM, so the AirPort will be "on" at the same time the first rule ends, so there will be no break.
If you really want the second rule to turn the AirPort "off" at 2:00 AM.......then set that time for 1:59 AM. If you set the rule for 2:00 AM, then AirPort will really turn off at 2:01 AM.

HT2500 How do I set up separate and different mail signatures for different email accounts?

How do I set up separate and different mail signatures for different email accounts?

Hi Tom,
In Mail>Preferences>Signatures, highlight the All Signatures icon on the left, drag the sigs you want to he Account on the left...

Hi I have two questions. I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users? How is the session timeout set? Thanks, YS

<i>I am using NAS 4.1 and was wondering is it possible to set a different session timeout for different users?</i>
Um, there is no such thing as NAS4.1.
I'm assuming that you mean NAS4.0 (maybe NAS4.0sp1?). If so, then the session timeouts are specified in the session section of the NTV configuration files.
AFAIK, you can specify session timeouts on a per user basis.

JTree: How to set different cell editor for different tree Nodes.

I have a JTree and I want to set different cell editors for different node depending on some condition. E.g. I want to set ComboBox as editor for leaf node but each leaf node will have its own set of data.
Any help or pointer?
Thanks in advance
Sachin

take there:
http://www.mutualinstrument.com/Easy/FAQ/Tree/tree.html

Access control for different user groups in APEX 4.0

Hi guys,
in Apex 4.0, is there any way to use the access control page to configure access control for different user groups?
The access control page currently only has an access control list by users with 3 privileges namely, Administrator, Edit & View where Administrator has the highest access level & View the lowest. Therefore 1 user cannot have more than 1 different privilege, however if the user belongs to 2 or more different groups then we can control what access he can have in a more fine grained manner. We also want to have more than the 3 privileges given.
Can we assign different groups to different users and let them have different privileges to be configured by page, region, process or item level?
Now Apex will create 2 tables, Apex_Access_Control & Apex_Access_Setup to store the application access control mode & access control list. It will also create 3 authorization schemes "access control - administrator", "access control - edit" & "access control - view" based on the 2 tables.
Does this mean we have to change the table structures & edit the authorization schemes to suit our usage? We are reluctant to do this because if we upgrade to a newer version of Apex then we would have to merge our pl/sql coding with Apex's updated code.
How can we auto-configure more than the 3 authorization schemes in the access control page? Is there any way to achieve a finer grain of access control based on the current access control administration page given by Apex without writing it ourselves?
We are afraid that we may have missed something on Apex access control & do not want to reinvent the wheel.

Hi Errol,
to build your own application authorization scheme around the security model supplied by Apex for administration of the Apex environment would be a bad idea.
This was never intended for authorization scheme management in custom built Apex applications, it was solely intended to control access in the Apex environment overall. The API for it is not published, and making changes to it, such as adding more roles, would run the risk of breaking the overall Apex security model. It would not be supported by Oracle and Oracle would not guarantee the upwards compatibility of any changes you make in future versions of Apex.
In short, you should follow Tyson's advice and build your own structure. As he indicated, there are plenty of examples around and provided your requirements are not too complicated, it will be relatively simple.
Regards
Andre

How do I set up an itunes account for a minor?

How do I set up an itunes account for a minor?

Hello kyleaho0048,
Thanks for using Apple Support Communities.
If you are trying to set up a new Apple ID, please follow the instructions in the following article:
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/HT2731
Since this is for your young son, I also recommend taking a look a the the built-in parental controls in iTunes:
iTunes: Using Parental Controls
http://support.apple.com/kb/ht1904
Take care,
Alex H.

Apply different firewall controls on different adapters

Hi Mac Folks
As Mac Pro got three network adapters (2 x Gigabit Ethernet + 1 x Wi-Fi), and I prefer using the wireless connection to access the Internet and leaving the two wired connections for private file sharing and VM communciation.
Therefore, for the wireless connection, the firewall policy should be to disable all incoming traffic and allowing all outgoing access, while the wired connections should be firewall free or allowing specifc application protocols. But it seems the Firewall options under System Preferences have no such a detailed control.
Is it possible to apply different firewall controls on different adapters?
Any comments are welcome.
Thanks,
B

Bad news on ipfw -- DEPRECATED:
IPFW(8) BSD System Manager's Manual IPFW(8) NAME ipfw -- IP firewall and traffic shaper control program (DEPRECATED) SYNOPSIS
ipfw [-cq] add rule ipfw [-acdefnNStT] {list | show} [rule | first-last ...] ipfw [-f | -q] flush ipfw [-q] {delete | zero | resetlog} [set] [number ...] ipfw enable {firewall | one_pass | debug | verbose | dyn_keepalive} ipfw disable {firewall | one_pass | debug | verbose | dyn_keepalive} ipfw set [disable number ...] [enable number ...] ipfw set move [rule] number to number ipfw set swap number number ipfw set show ipfw {pipe | queue} number config config-options ipfw [-s [field]] {pipe | queue} {delete | list | show} [number ...] ipfw [-cnNqS] [-p preproc [preproc-flags]] pathname
DESCRIPTION Note that use of this utility is DEPRECATED. Please use pfctl(8) instead.

I'm wondering how do i set up a fire wall for mac. is there a program or somthing?

i'm wondering how do i set up a fire wall for mac. is there a program or somthing?

OS X already includes a software firewall. Enable it in System Preferences > Security & Privacy.
If you are using your own wireless network you are already beyond a hardware firewall, so it is unnecessary and redundant to enable it. Its use is justified if you intend to connect to a public network, or are otherwise using a LAN along with others who may not be trusted.

How do I set up a seperate account for my wife?

We finally purchased a nice new iPhone for my wife. But she would like her own iTunes account. How do I set up a seperate account for her? She has her own laptop, with an iTunes account on it that I was using. Should I just un-install that iTunes package and have her download a new version? I'd rather have two versions so I don't lose the music on that old iTunes account. It's not huge, but would be a PITA.

Apple ID
Go to iTunes > Store > Sign Out (your apple id) and sign your wife apple id in.

How do I set Firefox to be usable for all users on one computer?

How do I set Firefox to be usable for all users on one computer?

I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
[https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

How do i set up a second display for my iMac desktop? I want to use both displays at the same time.

how do i set up a second display for my iMac desktop? I want to use both displays at the same time. My iMac is the 24" Late 2006 model. I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time. thank you.

If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
Noting that the (digital) DVI is far better than the (analog) VGA connection.
Also see > Using Dual Displays on Mac OS X: The Experience

How can i set up multiple user accounts for my new ipad mini?

How can i set up multiple user accounts for my new ipad mini?

The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

How do I set the default welcome page for PUBLIC user

gurus,
i'm using -
Oracle 9i Database
Oracle 9ias Portal Release 2
QUESTION => how do I set the default welcome page for the PUBLIC user.
i did the following to achieve this -
1. logged into portal
2. clicked on builder
3. clicked on administer tab
4. selected PUBLIC user in the Portal User Profile portlet
5. went to the preferences tab
6. in the default home page selected a custom page group
7. logged out of portal
8. open a new browsere session
9. type the portal URL and i get the login page ....??
i'm unable to understand this behavior ... shouldn't i be getting the page group that i set for the PUBLIC user in step 6 above ....
the second QUESTION is => when the user logs out he/she should see the PUBLIC page set in step 6 above ... but, instead the user sees a page that is as follows -
Partner Application Name Logout Status [Logout Status]
Oracle Portal (portal) logout status
The SSO Server (orasso) checkmark
buzz.resva.trw.com:7778 checkmark
infrastructure.happy.resva.trw.com checkmark
portal1.buzz.resva.trw.com checkmark
portal2.sylvester.resva.trw.com checkmark
sylvester.resva.trw.com:7778 checkmark
so, how can i set the default page for the PUBLIC user and also a page when he user logs out.
ideas anyone ....?
thanx a bunch.
hero

Hi,
The sequence of operation you are doing to set the home page for public users is correct. You are getting the login screen as the "custom page group" selected as "home page" has not been granted to public.
Also, while logging-out, it is normal behaviour to get the screen where it shows the list of partner applications from where user has been logged-out. When you click on "Return" button, you will get to the "home page" set above.
Hope it clarifies the things.
Regards,
Ved

HT2731 How do I set up an Apple ID for a child with gift card credit

How do I set up an Apple ID for a chld with a gift card credit, without credit card details and without using my own account?

Go to the main iTunes Store page (within iTunes), click on the "Redeem" link on the right side of the page, click "Create Apple ID", and enter in the code from your card when requested. You should be able to create an iTunes Store account for your child without needing a credit card. You'll just need an email address for him/her to create the ID, though it can be a "temporary" one that you don't intend to really be used. You can change the email address to which receipts are sent to an account you really wish to use.
Regards.
Message was edited by: varjak paw

How do I set up different hardware controls for different patches in mainstage?

Similar Messages

Maybe you are looking for