How do I set up Mail only for sending? (Don't want to receive messages)

Maybe answer is somewhere on the board but I can't seem to find it...
I think in the past, on older version of Mail, I was able to set up a personal account on my work computer so that I could send from the personal account in Mail. Thing is, I don't want to see or store incoming personal messages (too much distraction at the office!).
Can Mail be set up this way?
If I uncheck "enable account," then I don't see option to send from that account. But if I check it, it shows me incoming mail from the account.
Thanks in advance.

How about Mail -> Preferences -> General: Check for New Messages and select "Manually" from the drop down.
Now Mail won't look for incoming mail unless you tell it to.
Regards
TD

Similar Messages

  • How do I set up a folder for an email I want to save?

    I have set up several folders in Thunderbird. Now when I receive an email and want to move it to one of these folders, I can't figure out how. I don't see a link "Move To." Can anyone help me with this?
    Don

    Right-click the message - Move To
    Alternatively you can also just drag and drop the message to the desired folder.

  • How do I set up Mail service for simple IMAP with SSL?

    This should be easy but something isn't working. I have an Xserve with 10.6. I've enabled the Mail service, and want to add this server as an Account under Entourage. I've put in the IP address, my username/password, etc. but something isn't working. It appears under the Accounts folder tree, but when I try to send an email, I have a window that says "4.7.0 TLS not available due to local problem", Error -17099". I've also seen errors telling me the password is being sent in cleartext and I can't see where I enable the same (SSL, password needed) settings on the client and the server menus. Can someone clue me in - what are the right settings on both ends to have a simple IMAP w/o cleartext passwords? I had this working fine in 10.4 Server... Thanks!
    Mike

    I see dropdown menus for SMTP SSL and IMAP/POP SSL. I have them both set as "Require"
    Do not to this if your server is handling incoming mail from outside your network.
    Few remote mail servers will use SSL, so if your server requires SSL then you will not be able to receive mail from outside your domain.
    'Use', on the other hand, advertises the fact your server supports SSL, so clients and remote servers can use if if they like, but this still allows other mail in.
    What should "Authentication" be - "Login" or "Plain"
    Do not use Plain unless you absolutely trust all your clients (i.e. they're all on a LAN or all using SSL). Plain sends an unencrypted password over the wire, which is susceptible to sniffing.
    what will the client be using?
    Whatever you set it to.
    The client complains about a correct root certificate not being installed).
    Are you using a self-signed certificate? if so, you're going to get that unless you do a lot of extra work. Getting a real certificate from a trusted authority should resolve this.
    As for the slow connections, the use of SSL shouldn't significantly impact connection or delivery/transfer times, so something else is amiss.

  • How to i set up my outbox (for Send Later messages) so that I control when the messages are sent?

    When i compose a message but do not want to send it right away, i click on Send Later and it goes into my Outbox. It remained there until i signed on to my email the next time. Then a message would come up asking me whether i wanted to send unsent messages. This gave me control over when the messages went out.
    Something has changed (computer gremlins at it again) and now the messages go automatically the next time i log on.
    I want my outbox set up as it was before, where i am asked whether i want the messages to go, so that i have that control.
    I have tried to figure out how to do this using this help resource, and going via Tools, Account Settings etc., but haven't been able to find anything indicating how to set my outbox back to asking my permission to send unsent messages.
    Hope someone can help.
    Thank you.

    check these settings:
    Tools > Options > Advanced > Network & Disc Space
    click on 'Offline' button
    When starting up:
    Select: 'always startup online'
    Send unsent messages when going online
    select: 'Ask me'
    Download messages for offline use when going offline?
    suggest 'Ask me'
    click on 'OK' to save offline settings
    click on 'OK' to save changes to Options.
    Create an email addressed to yourself and use the Send Later option to put it in the Outbox.
    Close and reopen Thunderbird.
    You should get the prompt asking to send email.
    If you choose yes then the email in the Outbox will be sent.

  • How do I set my mail folders to keep items saved there indefinitely while only keeping mail in my active mailbox for a specified period of time?

    How do I set my mail folders to keep mail saved there available indefinitely while only keeping active mail in my mailbox for a specified period of time?

    There is no time limit in Firefox 4+ versions for the history.<br />
    Firefox determines automatically how many pages can be kept without affecting the performance.<br />
    You can see the current value via the reads-only pref places.history.expiration.transient_max_pages on the about:config page.
    See:
    * http://blog.bonardo.net/2010/01/20/places-got-async-expiration
    If you lose the history then make sure that you do not use Clear Recent History to clear the browsing history.<br />
    Also make sure that you do not have cleanup software that might clean up files in the Firefox Profile Folder.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *Firefox > Preferences > Privacy : History: [X] Clear history when Firefox closes > Settings
    *https://support.mozilla.org/kb/Clear+Recent+History

  • How do I set up Mail for Exchange on my N97 mini?

    How do I set up Mail for Exchange on my N97 mini? I want to read my work email from outlook to my mobile.

    You can download mail for exchange to a pc or laptop then use nokia pc suite to install it.
    The bug still exists were your email will be show up as being sent from Mail For Exchange and not you name
    Anyone know a way around that?

  • How do I set up mail for iMac with hotmail?

    How do I set up mail for iMac with hotmail?

    Open mail and follow the onscreen directions. If you are trying to set up this as a a second account, select Preferences from the Mail menu and choose the accounts tab. Click the plus button at the bottom of the screen and follow the onscreen directions.

  • Mail how do i set a read receipt for messages I send

    mail how do i set a read receipt for messages I send

    Hi Sunny
    There's no built-in option, and the workaround is rather complex. I would advise against it, since "read receipts" are not a standard part of the email protocol, and most email clients cannot return receipts or have it turned off anyway.
    Matt

  • Apple ID for my 9 year old - How can I set up an ID for my 9 years old. We have bought him an ITouch for his birthday, he also has a $30 iTunes card. To load up the iTunes card he needs an ID. When I try to set him up it says he is below the min age.

    How can I set up anApple ID for my 9 years old. Every time I try it tells me he is bolew the min age. If this is the case how can he download free games and how can he redeem his birthday $30 iTunes card? I dont want him to use my ID as it has my credit card details.
    I'm very fustrated with this as it seems the Apple kit is for 13 years and older only.
    Cheers
    Brad

    That's great your 9-yr-old is responsible enough to handle an iTouch!
    There's no way around the age limit. I suggest a family account that you, an adult, control.

  • How can I set a point size for staticTexts

    Hi everyone
    How can I set a point size for staticTexts?
        staticTexts.add({staticLabel:"Please select a tedious job"});
    thanks
    Teetan

    Thank you Vandy
    Thank you pixxxel schubser
    And thank you Peter Kahrel
    But Ho can call function for this script?
    //======================================================================
    Thank you Vandy
    Thank you pixxxel schubser
    And thank you Peter Kahrel
    But Ho can call function for this script?
    //======================================================================
    var stringList = [  
    "01.  digit at end: superscript",
    "02.  digit at beginning: superscript",
    "03.  notes  applied to italic (table only)",
    "04.  Initial Cap+ markup",
    "05.  Small Cap + markup",
    "06.  del [ ] + markup",
    "07.  add an EM at beginning",
    var win = new Window("dialog","Tedious Jobs_(\"TDJs\")");  
    this.windowRef = win;  
    win.grp = win.add ("group", undefined);  
    win.grp.alignChildren = "top";  
    win.grp.margins = 5;  
    win.grp2 = win.grp.add ("group", undefined);  
    win.grp2.orientation = "Column";  
    win.grp2.alignChildren = "left";  
    win.grp3 = win.grp.add ("group", undefined);  
    win.grp3.orientation = "Column";  
    win.grp3.alignChildren = "fill";  
    win.grp2.Txt1 = win.grp2.add ("statictext", undefined, "Please select a tedious job");  
    win.grp2.Txt1.indent = 0;  
    win.grp2.Ddl1 = win.grp2.add ("dropdownlist", undefined, stringList);  
    win.grp2.Ddl1.selection = 0;  
    win.grp2.sTxt1 = win.grp2.add ("statictext", undefined, "________________________________________");  
    win.grp2.sTxt3 = win.grp2.add ("statictext", undefined, "Be careful and pay attention in what you selected.");  
    win.grp2.sTxt3.graphics.font = ScriptUI.newFont ("Arial", "Regular", 10);  
    win.quitBtn = win.grp3.add("button", undefined, "Ok");  
    win.cancelBtn = win.grp3.add("button", undefined, "Cancel");  
    win.defaultElement = win.quitBtn;  
    win.cancelElement = win.cancelBtn;  
    win.quitBtn.onClick = function() {  
    win.close();  
      if (w.show() == 1) { 
                    var mRes = mStringList.selection.text;
                    mSelection = mStringList.selection.index;
                    app.insertLabel( "mDialog", mSelection.join() );    // to store dropDownList positions (as a string "," delimited)
                    return mRes;
            } else  {  exit();  } 
    app.doScript('main()', ScriptLanguage.JAVASCRIPT, undefined, UndoModes.FAST_ENTIRE_SCRIPT, "TDJs"); 
    function main(){
    var myObject;
    var myCheckSelection = false;
    if(app.documents.length > 0){
      if(app.selection.length > 0){
       switch(app.selection[0].constructor.name){
        case "InsertionPoint":
        case "Character":
        case "Word":
        case "TextStyleRange":
        case "Line":
        case "Paragraph":
        case "TextColumn":
        case "Text":
        case "Cell":
        case "Column":
        case "Row":
        case "Table":
      mySelected = app.insertLabel( "mDialog", String(mySelection.selectedIndex) );     //     to remember selection’s set 
      if(app.selection && app.selection[0].hasOwnProperty ("tedious_works") );
          tedious_works(); 
    else{
      alert("Wrong selection. Please try again.");
    function tedious_works() {  
      app.findGrepPreferences = app.changeGrepPreferences = null; 
      switch (mySelection.selectedIndex){ 
           case 1: {
       app.findGrepPreferences.findWhat = "^\\d";
       app.changeGrepPreferences.position = 1936749411;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
                break; 
           case 2:{
       app.findGrepPreferences.findWhat = "(?i)\\(note.+\\)$";
       app.changeGrepPreferences.appliedCharacterStyle = "Italic";
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "（附[註注].+）$";
       app.changeGrepPreferences.appliedCharacterStyle = "Italic";
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
           break; 
           case 3:{
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<a";
       app.changeGrepPreferences.changeTo = "A";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<b";
       app.changeGrepPreferences.changeTo = "B";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<c";
       app.changeGrepPreferences.changeTo = "C";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<d";
       app.changeGrepPreferences.changeTo = "D";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<e";
       app.changeGrepPreferences.changeTo = "E";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<f";
       app.changeGrepPreferences.changeTo = "F";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<g";
       app.changeGrepPreferences.changeTo = "G";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<h";
       app.changeGrepPreferences.changeTo = "H";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<i";
       app.changeGrepPreferences.changeTo = "I";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<j";
       app.changeGrepPreferences.changeTo = "J";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<k";
       app.changeGrepPreferences.changeTo = "K";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<l";
       app.changeGrepPreferences.changeTo = "L";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<m";
       app.changeGrepPreferences.changeTo = "M";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<n";
       app.changeGrepPreferences.changeTo = "N";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<o";
       app.changeGrepPreferences.changeTo = "O";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<p";
       app.changeGrepPreferences.changeTo = "P";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<q";
       app.changeGrepPreferences.changeTo = "Q";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<r";
       app.changeGrepPreferences.changeTo = "R";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<(?<!’)s";
       app.changeGrepPreferences.changeTo = "S";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<t";
       app.changeGrepPreferences.changeTo = "T";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<u";
       app.changeGrepPreferences.changeTo = "U";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<v";
       app.changeGrepPreferences.changeTo = "V";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<w";
       app.changeGrepPreferences.changeTo = "W";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<x";
       app.changeGrepPreferences.changeTo = "X";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<y";
       app.changeGrepPreferences.changeTo = "Y";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<z";
       app.changeGrepPreferences.changeTo = "Z";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
           break; 
           case 4:{
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<A";
       app.changeGrepPreferences.changeTo = "a";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<B";
       app.changeGrepPreferences.changeTo = "b";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<C";
       app.changeGrepPreferences.changeTo = "c";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<D";
       app.changeGrepPreferences.changeTo = "d";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<E";
       app.changeGrepPreferences.changeTo = "e";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<F";
       app.changeGrepPreferences.changeTo = "f";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<G";
       app.changeGrepPreferences.changeTo = "g";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<H";
       app.changeGrepPreferences.changeTo = "h";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<I";
       app.changeGrepPreferences.changeTo = "i";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<J";
       app.changeGrepPreferences.changeTo = "j";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<K";
       app.changeGrepPreferences.changeTo = "k";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<L";
       app.changeGrepPreferences.changeTo = "l";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<M";
       app.changeGrepPreferences.changeTo = "m";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<N";
       app.changeGrepPreferences.changeTo = "n";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences.findWhat = "\\<O";
       app.changeGrepPreferences.changeTo = "o";
       app.changeGrepPreferences.underline = true;
       app.selection[0].changeGrep();
       app.findGrepPreferences = app.changeGrepPreferences = null;
       app.findGrepPreferences = app.changeGrepPreferences = null;

  • How do I set up my 3G to send/receive mail from MS exchange?

    How do I set up my 3G to send/receive mail from MS exchange?

    Welcome to the Apple Community.
    If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
    1. Configuring Mail in Snow Leopard
    2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • How do you set the font color for a specific entire row inside a JTable?

    How do you set the font color for a specific entire row inside a JTable?
    I want to change the font color for only a couple of rows inside a JTable.
    I've seen some ways to possibly do this with an individual cell.
    Clarification on changing the font color in an individual cell would be helpful too if
    there is no easy way to do this for a row.

    hai,
    Try out with this piece of code.Create your table and assign the renderer to each column in the table.
    CellColorRenderer m_CellColorRenderer = new CellColorRenderer();
    for(int i=0;i<your_JTable.getColumnCount();i++)
    your_JTable.getColumnModel().getColumn(i).setCellRenderer(m_CellColorRenderer);
    class CellColorRenderer extends JLabel implements TableCellRenderer
    CellColorRenderer()     
    setOpaque(true);     
    setHorizontalAlignment(LEFT);
    setVerticalAlignment(CENTER);
    setBackground(Color.white);
    setForeground(Color.black);
    protected void setValue(Object value)
         setText((value == null) ? "" : value.toString());
    public Component getTableCellRendererComponent(JTable table,Object value,boolean isSelected, boolean hasFocus, int row,int column)
         if(isSelected == true)
              setForeground(Color.red);
         else
              setForeground(Color.black);
         setValue(value);
         return this;
    regards,
    bala

  • How can I set up auto respond for email

    How can I set up auto respond for email?

    Hey there jimmac169,
    It sounds like you want to have the Mail app automatically reply to emails that come in. You can do this in the app itself, but in order for the function to work, Mail needs to be open. Take a look at this info from the following article:
    Mail (Yosemite): Reply to, forward, or redirect messages
    Automatically reply to or forward messages
    Mail must be open before it can automatically forward or reply to messages. If you want to send automatic replies when Mail isn’t open—like when you’re on vacation—check with the provider of your email account. 
    Choose Mail > Preferences, then click Rules.
    Click Add Rule, then type a name for the rule.
    Indicate whether any or all of the conditions must be true for the rule to be applied.
    Set the conditions that determine which messages to automatically reply to or forward.
    Choose options from the “Perform the following actions” pop-up menu.
    Forward messages: Choose Forward Message from the first pop-up menu, then enter the email addresses where you want to receive the forwarded messages. Click Message, then enter any text you want to include with the forwarded message. For example, you could explain that you’re automatically forwarding messages. 
    Reply to messages: Choose “Reply to Message” from the first pop-up menu, click “Reply message text,” then enter your reply. Mail includes the full text of the original message in your reply. 
    Click OK.
    Carefully consider the rules you create. If they’re too broad, messages can be sent inadvertently or create loops (replies to replies you sent). If possible, test the rules. 
    Thank you for using Apple Support Communities.
    All the very best,
    Sterling

  • How do you set up nested rules for iTunes smart playlist

    How do you set up nested rules for a iTune smart playlist

    Hello \"alice\",
    It sounds like you want to add additional criteria to your Smart Playlists.  I found an article with steps you can use to refine your Smart Playlist.  Step 2 specifically has what I think you are looking for:
    2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
    For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
    To add additional matching criteria, click the Add button.
    You can find the full article here:
    iTunes: How to create a Smart Playlist
    http://support.apple.com/kb/ht1801
    The article says it is archived.  In the current version of iTunes, in step 1 you will select File>New>Smart Playlist.  Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist. 
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • How do I set individual sound alerts for multiple email accounts?

    How do I set individual sound alerts for multiple email accounts?

    Here: http://www.guidingtech.com/15275/get-different-notifications-per-mail-account-io s-6/
    Long and short of it, the settings can be individually changed under Notifications. Select Mail and then the account you want to change the sound to.

Maybe you are looking for

  • Square Root and Powers Assignement

    Hey guys Ive just started my first year at university, still feeling like ive been thrown in at the deepend. I have a series of assignments to complete for my programming course, and part of one of them is to work out this following: d = (square root

  • After Effects CS4 error during render

    The error appearing is as follows... After Effects: AEGP Plugin Media IO Plugin: Unknown Error! MediaIO2 error: 0x4 Not enough memory to complete this encoding ( 5027 :: 12 ) Now, my computer memory is very poor (1.98 GB RAM), however, I do not belie

  • UIX/XML: sideNav  layout problem

    We're using UIXPages with a sideNav. The page itself contains a number of headers. Whenever a header is rendered below the sidenav the entire header is on the left margin of the screen. However I think it looks better if all the headers are justified

  • How do you uninstall Dreamweaver to fix it

    I am getting errors with my DW8. I am attempting to COMPLETELY remove it from my system to do a completely new install, but apparently I am not. Each time I install a fresh copy, I get the same error. Something to do with date.htm being invalid. I ha

  • 4.2.1 kids apps

    I have an old i-pod touch running 4.2.1 for my 5 year old and I can't find any apps. Any suggestions for finding older apps for him?