How do I set up my 3G to send/receive mail from MS exchange?

Welcome to the Apple Community.
If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
1. Configuring Mail in Snow Leopard
2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

Similar Messages

HT204053 How do I set up my Mac to auto retrieve mail from icloud?

How do I set up my Mac to auto retrieve mail from icloud?

Welcome to the Apple Community.
If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
1. Configuring Mail in Snow Leopard
2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
Entering iCloud email settings manually in Snow Leopard or Leopard

How do I set up a filter to stop relayed mail?

How do I set up a filter to stop relayed mail?
Unsolicited Bulk E-mail (UBE) is electronic mail sent to large numbers
of recipients without their knowledge or consent, usually advertising commercial
products or services. It is the electronic equivalent of paper "junk
mail", and is commonly referred to as Spam.
UBE is usually just a nuisance, but the volume of UBE received at a
certain site can at times become so onerous that business-critical functions
are affected. This is especially true when UBE is used maliciously
to produce a denial of service attack, where a mail server is inundated
with UBE and crashes because of the load. Another common UBE problem
is when a mail server is used as a relay for UBE, so that a particular
server spends all its time routing e-mail that isn't destined for its
users. Some ISPs have reported that their mail servers have been
hard coded into certain spam programs, so that they are constantly being
used as a relay. Not only does this slow down their mail service
locally, but sometimes other ISP's will identify the afflicted ISP as a
source of spam and begin to block messages, legitimate and spam alike,
coming from that ISP. ISP's often name UBE as their number one problem,
preventing them from providing fast, reliable service.
For a full definition of UBE see http://www.imc.org/uce-def.html
(Unsolicited Bulk Email: Definitions and Problems).
Messaging Server 3.5 Hosting Edition supports powerful filtering capabilities
on messages as they are received by the server. Various criteria
can be applied to incoming messages, including testing on number of recipients,
sender domain or IP address, messages being relayed, and more. Messages
can then be bounced, dropped, or reviewed by an administrator before being
delivered. Providers can filter out unwanted mail at the source or block
a third party from using their messaging server for relaying email.
UBE Filters Functionality Overview
The UBE filter is a plugin for Netscape Messaging Server 3.5. It works
by examining all incoming mail before it is routed throughout the system
(to users mailboxes or to other email servers). The UBE filter uses a set
of rules (also known as filters) to decide what to do with each piece of
mail. The filters are used to trap specified types of mail.
Mail that is trapped can be rejected, forwarded to a specific mailbox (e.g.,
the postmaster), deleted, or altered in some way. Mail that "passes"
all the filters continues on its normal course.
Filters can be set up two ways, either using the straight forward Graphical
User Interface (GUI) or by setting up the filters directly in the filter.cfg
file. Generally, one would use the GUI interface for simple, one
line filters. To set up more complicated, multi-part filters, editing
the filter.cfg file directly would be faster. Both methods
are accessed via the Messaging Server Admin tool, under Plug-ins.
The following discussion gives some high level examples of how to set up
simple filters using the GUI and via the filter.cfg file.
For detailed information on how to set up and configure the UBE Filter
plug-in, see chapter 5 of the online help, or http://home.netscape.com/eng/Messaging/guide35/ch5.htm#Controlling
unsolicited bulk email (UBE).
Setting Up UBE Filters with the GUI
The following screen shot shows a simple UBE filter being set up using
the UBE GUI. What is being set up is a filter to check all incoming
messages to see if they come from a domain that has been a regular source
of UBE. In this case, the name of the offending domain is "spammer.com".
So, each message that comes in has its "From" field checked to see if
it is from "spammer.com". If it is, the action is REJECT, meaning
the message is bounced back to the sender, with the appended message "I
don't accept mail from spammer.com".

 
Any field in the message can be examined, with some of the most popular
including the Subject, To, and Cc fields. Any regular expression
can be placed into the Value field, thus allowing the filter to check for
various conditions, including containment of a particular phrase (e.g.
Subject includes "make money"), or number of recipients (e.g., if greater
than 100, REJECT). For more information on how to write regular expressions,
see http://home.netscape.com/eng/Messaging/guide35/ch5.htm#Controlling
unsolicited bulk email (UBE)
There are a number of actions that can be taken on a trapped message.
The most common are forwarding to a "watchdog" account such as the postmaster,
rejection, and deletion. But, in addition, programs such as virus
checking can be run on a message to trap infected messages.
Setting Up UBE Filters by editing the filter.cfg file
In the above example, the filter that was set up was converted to a
short filter script that looked as follows:
Channel-From ".*@spammer.com" REJECT
"I don't accept mail from spammer.com"
This can also be directly entered into the filter.cfg file by
choosing the option "Edit Config File" from the UBE Page. This becomes
interesting for more complicated filters that require more than one filter
line. The following example shows a set of filters that were set
up to check for various conditions. For example, the fifth
and sixth line down is a filter that checks messages for viruses.

 
Using the UBE Filter for Anti-Relay
 
One of the most requested needs of the new UBE filters supported in
Messaging Server 3.5 is to provide "anti-relay", i.e., to stop UBE which
is from an outside domain and destined for another outside domain.
In these cases, the mail is usually UBE and is relaying to hide the source
of the original spammer.
There are two possible scenarios for anti-relay. One is where
there is a separate machine outside the firewall that checks for e-mail
for its domain. The other scenario is when there is only one machine
handling both internal and external traffic.
Scenario One: Separate machines used for internal and external
mail
Outside of the firewall are mail servers that handle all incoming mail
from the internet. Internal users connect to mail servers inside
of the fire wall. The scenario looks like this:
 
What we want to allow is users 1 and 2 (U1 and U2) to send mail anywhere
but X1 and X2 should only be allowed to send mail to our servers.
Solution:
On the External Mail Server create a filter script that checks the Channel-to
header for domains that are internal to us. Allow these through and
reject all other mail. E.g., the filters would look as follows:
 
<UL># if the mail is bound for domain1 or domain2 then exit the script
(and allow the mail to continue)
 Channel-To "domain1.com" EXIT
 Channel-To "domain2.com" EXIT
 # otherwise reject it outright ($ANY means any header and .* means
it has any text)
 $ANY ".*"
REJECT "This machine only accepts mail bound for domain1.com or domain2.com"</UL>
We don't need to do anything on the internal server since only our users
can get to it (because of the firewall) and we want to allow them to send
and receive any and all mail.
 
Scenario 2: Single machine used for internal and external mail
In this scenario the same machine is used for both internal and external
connections. The problem we face here is that we need to allow the
local users to send mail outside our domains but not allow external users
to do the same. Note: This set up is not generally recommended, since it
makes the Messaging Server open to external attacks.
 
Here, we want to allow U1, U2 and U3 to send anywhere and X1 and X2
to send to domain1 or domain2 only.
Solution:
The solution in this case is to put the same script as scenario 1 on
the server but pre-pend it with lines that check for a connection from
the internal domains. If the connection is from our users it must
be from certain IP addresses, say 128.128.128.* or 128.128.129.*, so we
look for that. If it's not from one of these two IP addresses, then
it must be from outside and we apply the same logic as in scenario 1.
 
<UL>#if the connection is from our internal domains then exit the script
(and allow the mail to continue)
 Host-From "128\.128\.128\." EXIT
 Host-From "128\.128\.129\." EXIT
 # if the mail is bound for domain1 or domain2 then exit the script
(and allow the mail to continue)
 Channel-To "domain1.com" EXIT
 Channel-To "domain2.com" EXIT
 # otherwise reject it outright ($ANY means any header and .* means
has any text)
 $ANY ".*" REJECT "This machine only accepts mail bound for domain1.com
or domain2.com"</UL>

I agree anti-relay can be using UBE feature. However, there is serious problem in reject the spam mail. My nms is using UBE feature to stop spam mail. According to the work flow of the UBE, the mail is received by nms completely and UBE is going to invesgate the mail address. Although UBE can stop the spam mail, the spam mail have a trouble in returning the mail to the sender. The reason is the sender address is usually not existed in the world. That will cause a lot of mail waiting in the mail queue.
In my experience, do not use UBE for anti-relay.

How i can set the selected item of a dropDown component from java code

Hi
Thank you for reading my post
How i can set the slected item of a DropDown component from backing beans java code ?
it is binded with a database , so one field determine its display and one other field determine its value , I want to set the selected item of this combobox
In back code i have both value and display values to use them .
can some one give me some help ?
Thanks ,

See code sample 3 at http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
See also, the selection components row in the table under http://developers.sun.com/prodtech/javatools/jscreator/learning/tutorials/2/helloweb.html
It says
One way to preselect items is to call setSelectedValue(Object[]) or setSelectedValue(Object) from the prerender() method. You pass in the return values of the items that you want preselected. Be sure to verify that getSelected() returns null before setting the default options, or you will overwrite the user's selections on a post-back.

How do I set up my icloud account to receive emails on my ipad ?

How do I set up my icloud account to receive emails on my ipad ?

Try this
Setting > iCloud > Turn on the iCloud e-m
iCloud: Set up iCloud Mail on your devices
Best of Luck

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

Read the printer manual.

How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

Last night, when I played my playlist songs with iTunes Genius, my iTunes, with one of my playlists selected, and set on "Shuffle On," "Genius Shuffle On, "Genius On," "Match On," and "Play," played selections from all of my songs in my playlist. Today, my iTunes Genius went back to the same problem it was giving me before last night. My iTunes Genius has been playing selections from just a few of my playlist albums. How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

No backup is a huge mistake.
You can redownload some itunes purchases in some countries:
Downloading past purchases from the App Store ... - Apple - Support

How do I set up my Epson printer to print wirelessly from my Mac Pro

How do I set up my Epson printer to print wirelessly from my Mac

Hello:
You need to go to Epson for specifics (is your printer set up for Airprint, etc).
Barry

HT4628 How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

How can I set up a standard account to auto disconnect from the wireless network upon logging out (Using Mavericks)? There used to be a setting for this in previous versions of OSX but I can't find it in the new version.

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Simple/silly question: how do I set/change default font/color for outgoing mail messages?

Just a suggestion..........
Download Thunderbird. Easier to use when it comes to what you want to do w/your emails.

How do you set-up a hotmail email address in mail

how do you set-up a hotmail email address in mail?
I cant seem to add it. any ideas why it cant connect to the server? what server address should i be using?
regards
Brendon

Hi bmuur,
I also had the same problem.
I clicked Microsoft Exchange and kept trying to add my hotmail account that way but it kept asking for a server address for it to work.
If you go into Internet Accounts and instead of clicking Microsoft Exchange scroll down to the bottom of the list and click Add Other Account...
It will ask what sort of account you want to be created and I selected Add Mail Account and clicked create.
Enter your full name, hotmail email address and password.
I then clicked create and it worked for me.
Hopefully this solves your problem.

How do I set up Safari to my default e-mail client?

How do I set up Safari to my default e-mail client?

Hello Irvkor,
You can set up your default mail client in Mail.
Open Mail
In the menu bar choose Mail... > Preferences
In the Preferences pane choose General and in the Default email reader menu select your email client
Quit Mail
Now when you click on a link in Safari that email client will open.
Hope this will help.

HT4108 How can I set my i phone to send a video signal to my television?

How can I set my I phone to send a video signal to my television?

iphone's earlier then iphone4s don't support mirror so only apps which support the old tv out works like photo app and youtube and video app
composite being the worst resolution tv output out there does not support airplay mirror even with iphone4s
test with the supported apps

How do I set up email accounts to send emails while travelling overseas using various wifi locations?

How do I set up email accounts to send and receive
emails while travelling overseas using various wifi locations?

Many ISP provided email accounts limit connections to their outgoing SMTP email servers to only connections coming from their own network. So, if you try to send email when not connected to their network (i.e. when not at home), the connection will be rejected.
If you are using an ISP provided email address, in these circumstances, you'll need to ask your ISP if they provide an "authenticated SMTP connection" so that you can send email via their SMTP server when not actually accessing the internet via their network. You'll need to enter your email account username and password in the Outgoing SMTP server settings and possible configure SSL or outgoing port numbers. Your ISP will be able to advise on this though, as the exact setting vary between ISPs.
By far the best solution though, is to use an email account that is not tied to any particular ISP, such as a GMail account, as these can be used from anywhere, on any network and provide authenticated SMTP as standard.

How do I set the Submit button to send the information directly to a specific email address?

How do I set the Submit button to send the information directly to a specific outside email address? It isn't clear to me where or how it says that you can do this.

Is this for a web form or a PDF? If PDF, you would have to use Acrobat to edit the form and replace the submit button action with either a "Submit a form" action using a mailto type URL, or use the doc.submitForm statement to do the same.

How do I set up my 3G to send/receive mail from MS exchange?

Similar Messages

Maybe you are looking for