How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

how do I set up my airport to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

I set up my new HP Descjet 3054A . I had a problem becouse Apple give me CD as a driver. The thing was that CD wasn good for this printer becouse it was old software:) I had to go to Apple store so the specialist had to download me he wright driver. Becouse I didnt wannet to screw this up . When he downloaded driver I fired it up at house and thingworks perfect. The thing is when you download all the software from HP side . Then you have to connect your MAC to printer via USB . Fallow the instructions it should works. Worked for me. Good Luck!

Similar Messages

I have always heard that Macs are less likely to get infected with a virus. My computer has been running much slower since I installed Maverick. Just not sure what the problem might be. Is there a way for me to run a diagnosis?

I have always heard that Macs are less likely to get infected with a virus. My computer has been running much slower since I installed Maverick. Just not sure what the problem might be. Is there a way for me to run a diagnosis?

Some have found relief just by reinstalling, but it is more than likely incompatible third-party applications that slow it down.
You will have to investigate to see what it is.
Open Activity Monitor and see if anything is using a lot of CPU% or Memory. If they are, check to see if there is an update for them.
Another place to look is the Console. See if anything is logging repeating messages with throttling and/or respawn in the All Messages list.
Sometimes it is not that easy to root out the problems, but if you have anything that purported to clean, protect, optimize, maintain, or flush your system, then that is likely the cause.

How do I add a used ipod to my itunes, i already have an itunes account for my ipad?

how do I add a used ipod to my itunes, i already have an itunes account for my ipad?

Just set it up using the same Apple ID/iTunes account.

HT201335 Can i use airplay with the apple tv and airport express without an internet connection? Basically Set it up as a closed network?

I was told I could set a local network with the airport express, apple Tv, and my iPad to stream videos or pictures to a TV for a presentation.
No internet connection is available at the location.
Is that possible? Or do I need to access itunes homeshare with an internet connection to make this work?
I've set it up at home where I have an internet connection and it works fine but I want to move the setup to my church for a class. The data I'm using is stored on my ipad.
I know I can do this wired with the HDMI adapter but would like to do it wireless.
Thanks for any help!

Ok so we now have a solution to the problem. A friend of mine came round to work this out with me last night and we were able to get it working, but it is not as easy as I had hoped. Fisrtly we plugged the airport express into my router using the ethernet cable (for this I am using an Airport Express Base Station") and in airport utilities selected the airport express. In edit, we then gave the airport express a new range of IP address which did not conflict with any of the other applications that I have already assigned. We also named the Airport Express with a distinguishable name. We then waited for the changes to be registered then unplugged the Airport Express from the router. I then plugged my AppleTV via HDMI into a tv to test it and selected the new wifi network with the new Airport Express distinguishable name. I was able to watch a video that I have on my ipad directly on my tv without being connected to the internet, and was able to play Airplay presentations.
No the easiest solution, and certainly not something that anyone at Apple has talked me through in my lengthy conversations with them at Applecare.
Hope this helps.

HT1515 How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

How do i get my old AirPort Express (7years old) to work with my new Time Capsule?

Does anyone at Apple have help for this sort of question - I too have an old printer (HP LaserJet 5MP) that I would like to keep using on my Mac. (Mac OSX 10.6.8).
I got it working by getting a USB cord that connects to it - but every once in a while it just stops working for weeks. The mac 'sees' it and it sends the data because the printer lights start blinking but then it just doesn't do anything. Is there no one who can tell me (and raterada) how to get some new life into these old printers. I would rather not add this (and a new toner cart) to the landfill just yet. . .

I have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?

i have the serial number for my mac mini but I do not have the connection cord. Is there a way I can find specs of this mac mini with just the serial number?

Enter the SN here:
Apple - Support - Check Your Service and Support Coverage
Also:
How to identify Mac mini models

Can I use a airport express to get internet connection to a Mac Mini that doesn't have wireless by adding it to my existing wireless network?

I bought a first gen Mac Mini for our daughter and it doesn't have internal airport adapter and was wondering if I got a airport express can I plug it in my daughters room and use it as a local router and just use the eithernet connect from it. Or would a airport extreme work better for this job. I have a wireless cable modem that we connect to. I also have a second question I have a iMac G4 that picks up the wireless signal but will not connect to it does it have to be a Apple airport for it to work or should it be able to connect to any broadcasted signal. Thanks for the help.

I'm not sure I quite understand. Do you wish to use the AEX to provide a wireless connection for a device that has an Ethernet port but no wireless capability of its own? You wish to use it in place of a wireless card that isn't internally installed? If so, the answer is, "Yes." It will work as a wireless access point. But you must have an extant wireless network because the AEX won't have an Internet connection when used in this way.
If you have an existing wireless network with a wireless router connected to your cable/DSL model or your modem is a wireless router as well, then the AEX may connect to it in bridge mode. Note that AEXs don't always play nice with non-Apple routers. Some work; others don't.

Someone gave me a airport express router. it works great with my macbook but when i try to connect to my iphone it says it can't be set up by "this software". Where can I download whatever software my iphone needs so I can get wifi?

Someone gave me a airport express router. it works great with my macbook but when i try to connect via wifi to my iphone it says it can't be set up by "this software". Where can I download whatever software my iphone needs so I can get wifi?

Per chance is your AirPort Express Base Station (AX) an 802.11g model? If so, that is why you are getting this error message from the AirPort Utility running on the iPad. You would need to use either version 5.6 or 5.6.1 running on a Mac or a PC to administer this base station.

ITunes (and Airfoil) can see Airport Express but can't connect in Windows XP (error -15000) - firewall problems?

I am using Windows XP Professional 2002 w/ SP3 on a Dell Latitude E4300 laptop wirelessly connecting to my Airport Express 802.11n (firmware 7.5.2).
I can see my Airport Express in iTunes 10.4.1 and can select it via the Airplay button. iTunes even detects whether or not a speaker is connected to the Airport Express. But when iTunes tries to connect, it comes back after a while saying "An error occurred while connecting to the Airplay device xxx. An unknown error occurred (error -15000)."
A similar problem happens with Airfoil from Rogue Amoeba that I use to stream music from other apps such as VideoLAN to Airport Express on the same laptop. I can see that my Airport Express is available but when Airfoil tries to connect, it comes back saying "It appears that a firewall on this computer is preventing Airfoil from connecting to xxx Airport Express. Please check your firewall settings and try again."
I've set both Airplay and iTunes as exception programs in my Windows Firewall setting, and even added TCP ports 5000 to 5005 and UDP ports 6000 to 6005 to the exceptions as recommended by Airfoil. I've also disabled Symantec Endpoint Protection that Ihave installed. The only thing I can't disable is McAfee Endpoint Encryption, since I also use the laptop at work and I don't have permission to disableMcAfee. I use this laptop to connect wirelessly with other devices such as HP wireless printers, NAS drives and other laptops on my home network and have never had any issues, so i think that this issue is specific to the Airplay software being blocked by some firewall (I am assuming Airfoil also uses Airplay).
I've tried this on different wireless networks and I have the same issue with Windows XP on my Dell Latitude E4300. I've also set up the network with no security, but the problem doesn't go away.
I also tried downgrading iTunes to 10.3.1 but won't work. I think it's an Airplay issue, not a specific iTunes issue, since I'm facing the problem with Airfoil as well.
How do I trace what is going on that is preventing iTunes and Airfoil from streaming to the AirportExpress within Windows XP?
I also have another Dell Inspiron laptop on the same network running on Windows Vista, and have no problems streaming music from iTunes or Airfoil to the Airport Express on the same network, even when the network is WPA-2 Personal (TKIP+AES) protected (I've seen other postings where WPA has been an issue, WEP has not, but in my case, this is not an issue). Ditto with my iPad2.
Thanks for your help!

I have the same problem with Windows 7 64bit. ITune can see AE and stream Music well. Airfoil, TuneBlade (airplay soft) can also see AE but can't connect and stream music. I ' ve already tried to setup firewall Exception list, even turning off firewall off both windows and antivirus but still got the same problem with the message 'Airfoil was unable to connect to the remote speaker " ... 's Airport Express". Please check the firewall on the computer where " ...'s Airport Express" is running and try again'. Any help would be appreciated !.

MBP C2D + Airport Express + WPA frequently loses connection. but WEP OK

many people seem to have wireless connectivity problems with their MBP
-- here is the problem I see with my 2wk old MBP and my wireless setup at home (Airport Express) and at work (Linksys, model# unknown):
1) MBP C2D + Linksys + WEP = no problems
2) MBP C2D + Airport Express + WEP = no problems
3) MBP C2D + Airport Express + WPA = frequent dropped connection, and poor range
for reference, my previous laptop:
4) Pismo + Airport Express + WEP = no problems
5) Pismo + Linksys + WEP = no problems
with WPA (whether WPA or WPA2) and the MBP, I turn on Airport, signal looks strong, but then suddenly disappears. I have to toggle Airport off and on and then (sometimes) I'll successfully re-establish connection - only to possibly lose it again at some random point in time. Or it may work fine for an hour or more - it's hit or miss. no such problem or inconsistency with WEP enabled instead.
both laptops are running OS X 10.4.8. Of course only 802.11b on the Pismo, but results don't change on the MBP whether b, mixed b/g or only g.
The Airport Express is set up as a closed network, it's running firmware v6.3 (though I also reinstalled v6.1 but no change). I've tried many of the various other ideas for fixes - deleted Airport related keychains, etc played with various other Airport config settings - but all evidence points only to WPA as being the differentiating cause.
does this match anyone else's experience?
and more importantly, is there some fix?
thanks in advance for your feedback or suggestions
MacBook Pro 15.4" 2.33GHz C2D Mac OS X (10.4.8)

Hi!
Used to have same problems. But not anymore.
Here's what I did. I have a DLINK 624 router. not the same model but this could help you, I guess
1) Disable Super G mode into router.
2) Choose a 62 character key with a $ in front of it. (go https://www.grc.com/passwords.htm) and use wpa2.
3) Uncheck the Robutesse Interference (sorry, i am french) in the airport menu.
4) Change the advanced performance settings from auto to 11 (Tx rate) into router.
5) Whent into keychains and only kept the one for the active wi-fi. Since I tried almost verything, there where a lot!
Since I did that, no more lost connection for a day now!
Now I am not saying that this is the ultimate fix....but It worked for me.
BTW, did not do the SMC and EFI upgrade, still a little scared after what I read in the forums...I bought my mac book pro last week...how come it did not came with all the upgrade done??!! bizarre.
Good luck!

AirPort Express, only one device connected at a time.

I was setting up my uncles Airport Express yesterdy and got everything set up and the wifi signal broadcasting properly. It was then time to set up his iPad. I used a windows computer to set up the iPad and everything was going fine. After the iPad was running and I connected it to the network, I would lose the signal from the PC. From that point forward I would only be able to access the internet on the PC when the iPad's wifi was turned off.
I have had this problem with other routers before but was never able to figure out the problem. Is there something that I am missing? any help would be appreciated. I set the netork up with the default settings and set up a password to the network that has been entered correctly on both machines. Any help will be appreciated.

How do you have your Airport Express setup?
On the Internet tab, what do you have for "Connection Sharing" ?
Off (Bridge Mode) ?
Share a public IP address ?
Other ?
Is your modem from your Internet provider just a modem, or a router, or a wireless router ????
More info is needed.

From last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but sti

from last 3 days i am trying to my best to use facebook in my i phone 4s but still i am failture to contect,i can able to use my facebook account on my pc or laptop but not in i phone,i remove facebook so manytimes and also reset all setting but still i am fail ,pls do needful

I am very happy to report that my server connection tech, which I called via landline, informed me to : 1. Open Tools 2. Scan down to Clear Recent History 3. Delete All. That was it! Unbelievable! Six hours of searching through the Windows catagories. I checked the results on an internet site, and viola! It was gone! Mozilla Firefox seems to remember the usernames and passwords irregardless of the option window that asks if you if want it to remember the user and password. I finally got in touch with my friend and he said he did not answer yes to the window, even though he was aware of it. No damage. I surely do appreciate everyones' concern in this, now what seems to be, a very simple solution. Cudos to Firefox! Thank-you! P.S. I now have to enter my information at the beginning of any password protected sites...no harm done! My friend is now condemned to the 'user account' site! lol...

Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

Why all of a sudden am I having difficulty sending Gmail emails? I get a send error. When I run diagnostics there is a SMTP and IMAP account for Gmail and I am not sure how to fix this.

Hi jodilynnf,
When using Connection Doctor to see what is could be causing the issue, look for the red dots to let you know what is wrong. Then all you have to do is correct that information. You can double click on the section that is giving you issue and it will take you there. Most issues could be just password being entered incorrectly. Take a look at the article below to walk you through troubleshooting issues with Mail.
OS X Mail: Troubleshooting sending and receiving email messages
http://support.apple.com/en-us/TS3276
Take it easy,
-Norm G.

Airport Express 1084: iTunes stops connecting

Hi Apple Community,
Thanks in advance for any help/assistance anyone can provide. My issue:
I own a really old Airport Express (model 1084). For years, I've only used it to stream music from iTunes on my iMac to speaker in my kitchen. I've never really had an issue with it.
After upgrading to Yosemite (10.1.1) I now have an issue. When I start to stream music to my kitchen speaker via the Airport Express connected to it, it initially works just fine. Then, after roughly a minute, it stops streaming. The status light on the Airport Express remains green. When I go back to my iMac, I see that only my "computer" speaker is checked. When I select "Kitchen Radio" (the name I gave my Airport Express) under the multiple speakers menu, iTunes attempts to re-connect to it, but it never can. Finally it give me an error message:
"An error occurred while connecting to the AirPlay device “Kitchen Radio”. An unknown error occurred (-65568)."
At that point, the only way I can get iTunes to re-connect to my Airport Express is to do a hard reset of the Airport Express (sticking a paperclip into the side of it, then plugging it in and waiting for the status light to flash), then set it up all over again. If I do that, it will connect to iTunes and begin to stream music again. But, after a minute, the music stops and the entire cycle repeats itself.
Any ideas on what I can try to do to rectify this issue?
A few notes:
Since my Airport Express is pretty old and I am running Yosemite, I cannot use the latest Airport Utility (6.3.4) to configure it. I have to use a workaround "launcher". I don't think Apple would like me posting what that is, but I believe it's a common one. In short, the workaround allows me to run Airport Utility 5.6.1 and, after I connect my Airport Express to my iMac via an ethernet cable, I can configure and set it up.
I don't use my Airport Express for anything other than streaming music from iTunes.
The wifi network in my house uses WPA/WPA2 Personal security.
The kitchen speaker I'm connecting to is a basic Tivoli radio (that I've used with my Airport Express for years without issue).
Any other info I can provide anyone, please let me know -- happy to do so!

Had the same problem myself, not with BT specifically, but think the same principal applies...
You currently have 2 wireless networks. One for BT and one for Airport, and the mac can only be connected to one wireless network at a time. The way I got things working was to:
Disconnect the mac from whatever wireless network it's connected to
Switch off the router
Connect the router to the airport express using an ethernet cable (should have got one with the router)
Switch the router back on.
The broadband signal is now being broadcast by the airport express, so if you connect to the airport network you can recieve the broadband signal and transmit to the express on the same network.
You can also set your network setting to connect to the airport network automatically. Think it's somewhere in system preferences / network. Can't remember exactly where and i'm not on a mac at the moment

ITunes sees remote speakers attached to airport express, but can't connect

"An error occurred while connecting to the remote speaker "Airport Express". The network connection failed."
iTunes 9.1(79)
Airport Extreme Base Station
Early model Airport Express connected to remote speakers
iTunes see the speakers in the drop down menu, and the airport express is connected to my network. I restored the airport express to factory defaults and started over. Same thing. Firmware shows as being current. Express has steady green light.
Any ideas? I am getting ready for my iPad, and need to get this fixed.
Thanks in advance.

Same problem for me. Ever since I upgraded to 10.6.3 and iTunes 9.1, about once per week I'll get the error message when trying to get iTunes/Airtunes to connect to my older Airport Express (running firmware 6.3) "An error occurred while connecting to the remote speaker <insert speaker name here>. The network connection failed." (No error codes are given.)
Airport Utility sees the offending Airport Express just fine (and there's a green light on said AE).
Curiously, a newer AE-n, elsewhere in the house (running firmware 7.4.2) does NOT exhibit this problem.
Simply restarting the offending AE does NOT clear the problem. Restarting the main router - a Time Capsule DOES clear the problem. Alternatively, toggling off the Airtunes functionality on the offending AE, restarting it, then toggling Airtunes back on, and finally restarting it DOES clear the problem (as an alternate to restarting the router). No matter how the problem is cleared, it returns within a week. It's frustrating that the problem cannot be recreated immediately.
Probably not relevant, but the computer on which I'm running iTunes (a Mac Mini) is connected to my TC via ethernet, not wirelessly.
I've tried the suggestion of disabling ipv6. No effect.
I fear the only solution will be to scrap my older Airport Express and replace it with a newer n-model. But before I resign myself to the $100 fix, any more ideas?

How do I set up my airport express to make a connection with my Hp? I already have it set up for my mac laptop just not sure how to set it up so that theres also a connection with my Hp

Similar Messages

Maybe you are looking for