How do i set up my e print to print in color

How do I set up my printer to print in color ?

Hi,
On my printer, I set it to print in color then it will print in color. You can do the same for your printer. Millions of them are out there, what is yours anyway ? To help us answer question quicker, please read this:
http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

How do i set up my iphone to my printer hp photosmart 5512

How do I set up my verizon iPhone to printer hp PHOTOSMART 5512

Hello,
Thanks for the post. With this one, you will need to get or access if already loaded, APPLE'S iOS download AirPrint. I've included several links below with some excellent information regarding this method. The first link is printing with AirPrint. A great place to start. Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&tmp_task=useCategory&cc=us&dlc=en&lang...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02759940&cc=us&dlc=en&lc=en&product=5063611&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&product=5063611&tmp...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02945411&cc=us&dlc=en&lc=en&product=5063611&tmp...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

How do I set up my MacBook Pro to print via wi-fi to my printer

How do I set up my MacBook Pro to print via wi-fi to my printer?

It is rather hard to know how to help you since, among other things, you didn't tell us what printer you own, what you've tried thus far, and what happened when you tried it. Your printer came with documentation and it may have even come with a disk that takes you through the process step by step. My first two suggestions are that you (1) make sure you know the password and SSID of your wireless router. You'll definitely need the password and you might need to know the router's ID name. (2) read and try to follow the instructions that came with your printer. In general, I've found that Canon and HP instructions and setup software are quite good while Brother wireless printers, at least in the past, have been rather flaky to set up (but work fine once that initial headache is dealt with).

HT4356 How can I set up a Canon MX410 to print from my iPad?

How can I set up this printer on my iPad?

If it is not an AirPrint enabled printer
iOS: AirPrint 101
you need an app to print via. Search the App store. Start searching for a cannon printer app and general print app like Print Central

HT204135 how do i set my macbook air to only print in black and white

How do I set my MacBook air (mountain lion) to only print in black and white?

Look in the settings for your printer, in System Preferences

How do I set up my HP 7520 to print card stock off Avery 8859 design???

Trying to print business cards after designing on Avery 8859 card stock design. HP 7520 All in one will only print a test page of thumbnails of the business cards even though it shows the correct size, etc. for the 8859 paper.
How do I set the printer for card stock, etc. as Avery describes, and what is going wrong?? I have wasted many hours, and lots of paper, and still NO BUSINESS CARDS!!!

Hi @klmrazek,
Welcome to the HP Forums!
I noticed that you are wondering how to set up your HP 7520 to print card stock off Avery 8859 design? I am sorry for the frustration, but happy to look into this for you!
From what I can find, the card size you are using is 2" x 3 1/2". This is an unsupported paper size with this particular printer. According to your printer specifications, here are the supported card stock sizes:
Card type
Card size
3 x 5 in Index
76.2 x 127 mm (3 x 5 in)
4 x 6 in Index
101.6 x 152 mm (4 x 6 in)
5 x 8 in Index
127 x 203.2 mm (5 x 8 in)
However, you might be able to get around this by assigning an alternate driver, by going through this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R. Then try a custom size print by going through this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
Otherwise, I would suggest a different size of paper, within your supported sizes using the chart provided. Or you can also try contacting Avery Support, in case they may have additional software or drivers that you can try.
Hope this information is helpful, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

How do i set my officejet pro k5400 to print avery business cards

my office jet pro k5400 starts off printing my Avery 8865 business cards correctly, but the image migrates upward on each line of cards.
I printed it on a piece of plain paper and held it and the blank card stock up to a light, and they were lined up. They Avery help desk said I needed to adjust my printer to the Avery card stock. How does one do that. Thanks

Here is the Manual link for your printer. http://h10032.www1.hp.com/ctg/Manual/c00873752.pdf
Go to Page 17
To achieve this margin setting on a computer running Windows, click the
Advanced
tab in the print driver, and select
Minimize Margins.
You might print out the Configuration Page (if your printer has the button) and see what your setups are.
Also, under Devices and Printer, you should be able to right click on your printer, choose printer preferences and look for an option there. I have downloaded template options from Avery at http://www.avery.com/avery/en_us/ that has allowed me to print specific media that I could not normally do on a basic printer.
On some Avery documents, the leading border edge is different than the trailing edge, so they have to go in a specific direction.
I hope this helps.
If I have been helpful, a Kudo is always appreciated.

How do I set up Sfax on mymphotosmart c310a printer

How do I set up efax on my Hp photo smart c310a printer

Hi nlb619,
Unfortunately eFax is not supported on the C310a printer.
I was an HP employee.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

How do i set up the wireless option for printing rather than using an usb

how do I set up wireless printing function on my hp photosmart C4780

This should help: http://www.hp.com/global/us/en/wireless/reconfiguring-system-help2.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do I set up pixels and resolution to print out my illustration?

I want to print my illustration which I'm going to paint on Photoshop 5 to the size of 8x10(inch) at Walgreens.com. How do I set up the pixels and resolutions in Photoshop to start with?
There was a guideline at Walgreens Photo site, and it says "Minimum Recommended Image Resolution for 8x10 (inch) is 900x720 pixels." But when I set up the width and height of pixels to 900x720 and resolution at 360 and then painted there, the print outcome was chopped off at top and bottom (I selected 8x10 print size.)
How can I set up the right way so I can print right?
Thank you!
-Mitama

OK, it says minimum requirements. Which makes sense, the quality would be horrible below 112 ppi.
8" x 200ppi = 1600px
10" x 200ppi = 2000px
900px / 8" = 112.5ppi
720px / 10" = 72ppi
Can you see in the above math why part of the picture would be chopped off.
Lets do it this way:
900px / 72ppi = 12.5"
720px / 72ppi = 10"
900px / 360ppi = 2.5"
720px / 360pp = 2"
10" X 360ppi = 3600px
8" X 360ppi = 2880px
If you specify ppi you must specify the physical dimensions (inches) Especially when the printed paper is a known variable. The pixel dimensions they mentioned was a guideline not a requirement. They only wanted to make sure the quality did not fall below that value.

Dell 968w..how do I set the IP address for network printing?

Attempting to connect my Dell 968w to the network for access by my HP and Dell laptops. Dell said I need an IP address for the printer..how do I set the address???

you need to contact dell printer support for this info...this is usually done by printing a network config page on your printer & you'll see the printer ip address there.
Note:
Although I work for HP Imaging & Printing
Group , I am speaking for myself and not for
HP.
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

How do I set up my HP photosmart premium printer to work with lightroom 3.6

When I try to print from lightroom the above image is what I get. If I print via the HP desktop gadget the print is good and colors are fine. The scan of the image has brightened it up a bit.II have a Acer Aspire X3950 PC running windows 7 Home Premium (64 bit). The printer is a HP Photosmart Premium C310a. I Color profile is managed by printer.
Please help!

When you have your printer do the color management you have to tell Lr that the color is <Managed by printer>.
See screen shot:
Only one of the two can do the color management: either the printer or Lr. If both do it you get bad results. Same goes for Photoshop.

How do I set a landscape mode for my print out with the CNIreport?

I am using CNIReport and I was wondering how to set a landscape mode when printting?

There is a property of the CNiReport object called "Orientation". You just set that property to Landscape using the enumeration provided in the CNiReport class. Here is an example with the full path to the enumeration value:
m_report.SetOrientation(NI::CNiReport::NiReportsPageOrientation::NiReportsLandscape); //m_report is the CNiReport object
Best Regards,
Chris Matthews
National Instruments

How do I set up three home computers to print wirelessly? Officejet 6600

I have three howm computers with three users> I need everyone to print wirelessly but can find no information as to how to set that up...

Hi,
Based on its specs, you've got everything you need to set it ụp It has:
Connectivity
HP ePrint
Yes
Mobile printing capability
HP ePrint, Apple AirPrint™
Connectivity, standard
1 USB 2.0; 1 Wireless 802.11b/g/n; 1 RJ-11 fax
Connectivity, optional
No
You can connect it wirelessly to your home network and install its software & drivers on each computer then all can print. It also supports ePrint and AirPrint that means you can print from mobile devices too.
The following link shows many of its manuals.
http://h20000.www2.hp.com/bizsupport/TechSupport/DocumentIndex.jsp?lang=en&cc=us&contentType=Support...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How can I set up a Dell AIO 922 printer on my Macbook Pro?

I'm running OS X 10.9.2, and I've downloaded a lexmark 5200 series driver like others have said to do, but when I try to add a printer, nothing shows up.

Hi jdmyp6!
Here is an article that can help you set up this printer in Mavericks:
OS X Mavericks: Set up a printer
http://support.apple.com/kb/PH14143
You can also use this following article to find the correct printer software to download for your printer:
OS X: Printer and scanner software available for download
http://support.apple.com/kb/ht3669
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

How does one set the Network Name of the Printer

Hi,
I have two 7525's on my home network. How do I change their names from the default serial number based name to something meaningful so IOS/Android users can easily tell which printer is which?

Hi,
Greetings of the day!
There are many ways of achieving the above and the easiest way is mentioned on the link attached below :-
http://windows.microsoft.com/en-in/windows/rename-printer#1TC=windows-7
The above applies to other windows OS as well as win7.
And to make it meaning ful, you would need to get creative
If you have any queries related to the same OR any other do reply.
Regards,
Mohammed

How do i set up my e print to print in color

Similar Messages

Maybe you are looking for