How do i set up my hp c4360 for wireless if the printer is already installed???

hi
How do I set up my hp c4360 photosmart for wireless, asi tis already installed on my Dell laptp xps,
I put the installation disc in and it says printer already installed, I have a linksys wireless router
 I didnt have the patience to figure this out but its getting to be a pain to drag the laptop to the printer every time I need something printed. I am not real savvy with technical things, the Comcast guy setup my wireless router for me so i am hopin this won't be too complicated
thanks

Verify that you can browse to the printer's internal web page by its IP address.
1. Click "Start" button --> Printers and Faxes.
2. Under Printer Tasks, click "Add Printer".
3. Click "Next" button on the Add Printer Wizard window.
4. Select "Local printer attached to this computer". Deselect "Automatically detect and install My Plug and play printer". Click "Next".
5. Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
6. In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on and connected to same network that your computer is connected to. Click "Next" button.
7. Under "Add Standard TCP/IP Printer Port" enter the printer's IP address. Click "Next" then click "Finish".
8. Now, select HP from the list of manufacturers, select your printer from the list of Printer models and click 'Next' button.
9. If you can't find your printer, you'll need to find the install CD and use the "Have Disk" option to select one of the hp*.ini files. Alternatively, you can select another HP printer model from the same type.
10. Add the print spooler name and click "Next".
11. Click "Next"
12. Click "Next" and then "Finish"
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • How can I set a default save file for scans using the Solution Center?

    Using Windows 7 - 64 bit.   HP Photosmart Premuim C-309a All-In-One Printer.
    Because of a Windows crash, I had to install a new drive and reload Windows. I also reloaded other software like the HP Solution Center & Drivers. My problem is that I can't find how to set a default folder for my scans.  This is NOT mentioned in the user manual but it was originally accomplished by HP Tech Support when the printer was new.  Can anyone relate how to set default folders for my scans?
    Thanks.
    Tango
    This question was solved.
    View Solution.

    Here is a document on how to scan through Windows 7. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03476857
    Click either solution center or the icon of the printer on your desktop. Here select "Scanner Actions" (or the analogous selection). When the window pops up from the HP software it should provide you with options for file type (.tiff, .pdf, .jpg) as well as resolution and media size. Here on this page there is also an option for you to go to the advanced options. Using this you can alter the default safe folder. 
    Let me know if that helps you out! 

  • How do I set up family sharing if all my family members emails are already associated with my iTunes account?

    I want to set up family sharing but it won't let me because all the emails are already associated with the one iTunes account we have.  I am afraid to delete because my children use that email address for text messaging.  How do I set up family sharing if all my family members emails are already associated with my iTunes account?

    Hey Wendaroski,
    I am not quite sure what you mean by "my family members emails are already associated with my iTunes account" but what you need for each family member is an Apple ID. Yours would be the one for your iTunes account.
    If the other members of the family already have an Apple ID you can invite them to join the family group. If not they will need to create one, using their email address. This article shows how -
    Set up an Apple ID in iTunes - Apple Support
    Thanks for using Apple Support Communities.
    Be well,
    Brett L 

  • How do I set up a seperate account for my wife?

    We finally purchased a nice new iPhone for my wife. But she would like her own iTunes account. How do I set up a seperate account for her? She has her own laptop, with an iTunes account on it that I was using. Should I just un-install that iTunes package and have her download a new version? I'd rather have two versions so I don't lose the music on that old iTunes account. It's not huge, but would be a PITA.

    Apple ID
    Go to iTunes > Store > Sign Out (your apple id) and sign your wife apple id in.

  • How do I set Firefox to be usable for all users on one computer?

    How do I set Firefox to be usable for all users on one computer?

    I would think the about:config entries discussed are ex-factory set to values each user has to change individually, after the installation has run its course. The solution could be to have patched files ready to install post factum:
    [https://developer.mozilla.org/en-US/docs/Mozilla/Preferences/A_brief_guide_to_Mozilla_preferences A Brief Guide to Mozilla Preferences - MDN]

  • How do i set up my apple id with itunes and the appstore?

    How do i set up my apple id with itunes and the appstore?

    iTunes 10 for Mac: Set up an Apple ID account for use in the iTunes Store
    http://support.apple.com/kb/PH1726

  • How do i set up a second display for my iMac desktop?  I want to use both displays at the same time.

    how do i set up a second display for my iMac desktop?  I want to use both displays at the same time.  My iMac is the 24" Late 2006 model.  I recall that there is a cord for plugging in a second monitor, but I want to make sure that i can use both monitors side-by-side at the same time.  thank you.

    If the Display supports DVI, then you will need a > Mini-DVI to DVI Adapter and a DVI cable.
    If the Display only supports VGA, then you wiil need a > Mini DVI to VGA Adapter and a VGA cable.
    Noting that the (digital) DVI is far better than the (analog) VGA connection.
    Also see > Using Dual Displays on Mac OS X: The Experience

  • How can i set up multiple user accounts for my new ipad mini?

    How can i set up multiple user accounts for my new ipad mini?

    The iPad mini is basically a one user device. There are no Accounts. You can set up restrictions so that only you can do certain things.

  • HT2731 How do I set up an Apple ID for a child with gift card credit

    How do I set up an Apple ID for a chld with a gift card credit, without credit card details and without using my own account?

    Go to the main iTunes Store page (within iTunes),  click on the "Redeem" link on the right side of the page, click "Create Apple ID", and enter in the code from your card when requested. You should be able to create an iTunes Store account for your child without needing a credit card. You'll just need an email address for him/her to create the ID, though it can be a "temporary" one that you don't intend to really be used. You can change the email address to which receipts are sent to an account you really wish to use.
    Regards.
    Message was edited by: varjak paw

  • How can i set a global error page for all error cod

    how can i set a global error page for all error code?
    i don't want to leave a long list in the web.xml file.could any one help me?
    thanks

    If u have a common Error JSP named as ErrorPage.jsp
    You need to have the following piece of code in the JSP as :
    <%@ page isErrorPage ="true"%>
    This makes it as the Common Error Page for the Application. Now all you need to do is from other JSP's throw the Exception to teh container. The container will redirect to this Page and process accordingly.
    Thanks and regards,
    Pazhanikanthan. P

  • How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

    How do I set up my phone to send a file to print from my iphone 5 to my Samsung CLX-4195FW printer?

    Read the printer manual.

  • How do I set my Ricoh Aficio SP C220N to Default to print only Black and White?

    HI Guys can you help?
      How do I set my Ricoh Aficio SP C220N to Default to print only Black and White? When I check print Grey Scale box it uses the other colours to create the black instead of using the black toner cartridge. doing this from a PC works fine but not of a Mac and I am a newbie at this can you help as I don't want to waste any more colour ink unnecessarily.   

    Hi,
    Follow the steps below to print using Black Ink only:
    1. From the application used to print, click the File menu and select Print. The Print window appears.
    NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
    2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
    Will appear as Copies & Pages within Microsoft Office applications.
    3. Select Paper Type/Quality from the drop-down menu.
    4. Click the triangle next to Color Options to expend the settings.
    5. Set the Color field as Grayscale.
    6. Set the Grayscale Mode as Black Ink Cartridge Only.
    You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
    Any used preset will remain default so simply select teh standard preset to print in color.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I set up my new Macbook Pro without using the annoying Voiceover?

    How do I set up my new MacBook Pro without using the annoying Voiceover?  I cannot get it to work right; it seems to get stuck and repeats the same thing over and over.  It is driving me nuts!  Is there a way to begin the setup process without using the Voiceover system?  I am a new convert from a PC and I thought a Mac was supposed to be "intuitive!" 
    Any help is appreciated.
    Thanks.
    Pamela

    There is no good reason to register your Mac anyway.
    You can opt out of the setup process and registration by pressing Command (Apple key) and the "Q" key.
    The registration process requires you to divulge a lot of unnecessary information.

  • Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Simple/silly question: how do I set/change default font/color for outgoing mail messages?

    Just a suggestion..........
    Download Thunderbird.  Easier to use when it comes to what you want to do w/your emails. 

  • When I send an email the rely comes into another account in my apple email.  How do I set it so that my email comes to the correct address?

    When I send an email the rely comes into another account in my apple email.  How do I set it so that my email comes to the correct address?

    Hi Sunny C,
    Welcome to the Support Communities!  The "From" field should be showing by default, but you can check or change your settings for Mail with the instructions below:
    Mail (Yosemite): Set Mail preferences
    http://support.apple.com/kb/PH19178
    In the Composing pane, you can set the email account that you want to send new messages from.
    Also, check the View command on the Menu bar.  View > Message Attributes should have a checkmark beside the "From" field.
    Cheers,
    Judy

Maybe you are looking for

  • FREE OF COST - Purchase Accounting

    Dear all, I have one serious problem in my project. In purchase the Vendor is giving  some schemes like FREE OF COST. ie If we buy 10 items supplier is giving 1 item as Free of Cost. The issue is our client wants the Accounting Entries for the 10 ite

  • Sccm 2012 multiple language reports from mbam integration

    I installed mbam on my sccm 2012 primary server and all went well with one exception.  The reports have multiple languages.  In the reports folder that houses the mbam reports, there are multiple folders for the four mbam reports, so I have about 10

  • Validation Error: VLD-1111

    I'm trying to Validate a mapping between a source and staging table and recieve the following error message: "VLD-1111: The mapping cannot be generate due to operators requiring different code languages." My source table is in an Oracle 9i DB and so

  • High roll wait time, gui time and processing time

    Hi all, We are having a performance issue with the system at the moment. After running ST03N and STAD, we have determined that we are having abnormally high roll-wait, GUI and processing times. Here are some results from STAD: CPU time: 2956ms Proces

  • Trial and Activation Code

    I did download the trial version and when the trial version is end, i bouth the student plan called " creative cloud" but they keep asking me the serial no again and again.. so what am i support to do? ps. i did uninstall and install lots of time. bu