How do I set up my macbook pro to talk to a PC and share a printer

how do I share a printer wirelessly with a PC

Hi there
If you have a 2010 + MacBook Pro, then you will be able to play audio/video via the MiniDisplay Port to HDMI. You can purchase an adapter from here, or a 3rd party adapter from here.
Taylor

Similar Messages

  • How do i set up my macbook pro to use airplay on my apple tv

    How do i set up my macbook pro on airplay to show on my apple tv?

    http://store.apple.com/us/product/MB572Z/A

  • How do I set up my MacBook Pro to print via wi-fi to my printer

    How do I set up my MacBook Pro to print via wi-fi to my printer?

    It is rather hard to know how to help you since, among other things, you didn't tell us what printer you own, what you've tried thus far, and what happened when you tried it. Your printer came with documentation and it may have even come with a disk that takes you through the process step by step. My first two suggestions are that you (1) make sure you know the password and SSID of your wireless router. You'll definitely need the password and you might need to know the router's ID name. (2) read and try to follow the instructions that came with your printer. In general, I've found that Canon and HP instructions and setup software are quite good while Brother wireless printers, at least in the past, have been rather flaky to set up (but work fine once that initial headache is dealt with).

  • How can i set up my macbook pro that the sent emails show up in the sent folder?

    How can i set up my macbook pro that the sent emails show up in the sent folder?

    look at the Preferences and open the "Mailbox Behavior"  maybe the sent mail is being stored on the server?
    I going to have this post moved to the "Mail" forum

  • How do i set up my macbook pro to display on my Vizio flat screen TV

    Just purchased a new MacBook Pro and i was curious about what Components i need to purchase to set it up, thanks!

    http://store.apple.com/us/product/MB572Z/A

  • How can I set up my macbook pro to recognize my new IPad mini?

    My macbook pro doesn't recognize my new IPad mini. Although I'm using Icloud for backup, my apps aren't syncing to the IPad. What setting am I missing.

    Device not recognized
    http://support.apple.com/kb/TS1591

  • How do I set up my MacBook Pro to view on my HDTV?

    I connected my TV to my MacBook Pro with the hdmi cable and changed the display to mirror and changed the source on my TV to PC. What am I missing?
    Thanks!

    Check System Preferences > Sound > Output to see if you have a line for the TV (could be labelled with the brand of the TV or some string with "HDMI" in it). If you have one and it's not selected, select it.
    If you don't have one, the port you are using on your MBP may not support sound output. In that case, you might have to attach a separate audio cable.
    I'm not familiar enough with the model MBP you are using to say which situation is likely to apply to you.

  • How do you set up a MacBook Pro and a PC with one Airport Express?

    I have a MacBook and my roommate has a PC and we're trying to set up my new Airport Express at our college so we can hook up our computers and printers to it. I had it so that my laptop worked fine, but hers would "connect" and not really have any internet connection at all. Class starts on Thursday, so help would be kindly appreciated!

    I'm a great believer in the KISS principle.
    Configuration is simple if you start from a factory default condition.  Connect the Airport to AC power and finally to the Internet modem (or modem/router).  Open Airport Utility on your Mac or other computer and accept all of the recommendations.  After confirming that it works, insert your desired administrative and WiFi passwords.
    Do not expect the Airport to respond instantly to the configuration commands.  BE PATIENT!

  • How do i set up my macbook pro for the software i want to use

    how do i customize the building of my mac?  i want to add the software that i want?

    Most of the factory software-installation options have been dropped recently. This is probably because almost everything that Apple used to offer to preinstall for you can now be obtained very quickly and easily through the App Store.

  • HT1727 How do i set up 2 different apple id's on one PC and share the same music library?

    Hi, I have one PC but 2 apple id's between me and my wife and both of us need access to the music library and need to be able to sync our devices and preferences seperately. How is this possible? Any help would be appreciated...

    - Disable autosyncing: go to iTunes>Preferences>Devices and check the box that says "Prevent iPods ...syncing">
    - Connect the iPod and go to the music, apps and other panes for the iPod and check the boxes that say only sync the checked items.

  • Is it easy to set up a Macbook Pro alongside an existing iMac?

    How do you set up a Macbook Pro alongside an existing iMac please?

    Hi,
    We'd like to do everything, basically - to have the 2 machines completely in synch so that we can access all documents, photos, email, iTunes, between the two. We have Microsoft Office for Mac 2011 on the desktop so under its second user licence, I want to install that on the Pro. We also have Pages on the iMac but would this be shareable with the Pro or is it one App per machine?
    Thank you!

  • How can I restore my new Macbook pro to Factory setting?

    How can I restore my new Macbook pro to Factory setting?

    Install or Reinstall Lion from Scratch
    If possible backup your files to an external drive or second internal drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
    Select Disk Utility from the main menu and click on the Continue button.
    After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Erase tab in the DU main window.
    Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed.
    Quit DU and return to the main menu.
    Reinstall Lion: Select Reinstall Lion and click on the Install button.
    Note: Be sure you have an active internet connection.

  • Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

    Does anyone know how to set up a macbook pro so that other computers can join me and use my internet connection?

    Have you set up any security on the Mac Connection Sharing?
    Sorry but I don't use that so I'm not familiar with the settings.
    But if you haven't setup and security the iPhone might not mind but I know most Windows computers do not like to connect to Open WiFi. and make sure it is WPA or WPA2.
    Then again it may be a setting in the connection sharing like some type of MAC filtering or it may simply be that Mac OS X connection sharing only allows one connection at a time. Try disconnecting your phone and then connect the PC.
    As to Linc's response about Windows.
    Windows basically does care about connecting to open, unsecured, WiFi. But it will normally pop up a windows asking "Are myou sure you want to connect to this open network". And a simple click on yes will get you connected and an IP address.
    So this is clearly a Mac OS X problem.

  • Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over.  Is there a way to have additional users on the same comp have office available without having to re-install it for each user?

    mpr130 wrote:
    Help Please.  I am setting up my macbook pro for a second user but office didn't transfer over. Is there a way to have additional users on the same comp have office available without having to re-install it for each user?
    How did you attemp to transfer Office?
    OS X Lion: Set up a guest account

  • I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

    See below if the search engine setting was changed without your knowledge and you can't change it back.
    You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
    Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
    Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
    Step 1
    In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
    There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
    This step does not completely inactivate Genieo.
    Step 2
    Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
    Triple-click anywhere in the line below on this page to select it:
    /Library/Frameworks/GenieoExtra.framework
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.
    If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
    Move each of these items to the Trash in the same way:
    /Library/LaunchAgents/com.genieo.completer.update.plist
    /Library/LaunchAgents/com.genieo.engine.plist
    /Library/LaunchAgents/com.genieoinnovation.macextension.plist
    /Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
    /Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
    /usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
    /usr/lib/libimckit.dylib
    /usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
    ~/Library/LaunchAgents/com.genieo.completer.update.plist
    If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
    Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
    Step 3
    From the Safari menu bar, select
    Safari ▹ Preferences... ▹ Extensions
    Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
    Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
    Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
    You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
    Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

Maybe you are looking for

  • Oracle Apps R12.1.1 is not working properly with Toad

    Hi, Environment TOAD 7.6.0.11 Oracle Database 11.1.0 Oracle Apps 12.1.1 Q) When I Connect Oracel Application R12.1.1 database through Toad is not showing object definication like Procedures, function and Trigers defination in Toad. But it is working

  • How do I get my signature at the bottom of a letter in Mail?

    I have my signature in the signatures box in Mail as a .jpg. How do I get it to the bottom of any letter that I write? Many thanks forr your help.

  • FBCJ issue

    Hi Gurus, While posting entries of loans & Advances through FBCJ (cash journal) open line item is not activated in system.it shows posted status instead of open line item. if we pass same entry via F-02 then it shows open line item in ledger of loan

  • InDesign CC 2014 + Mavericks Issues?

    I'm running a 3-month old Mac Air with all the upgrades, bells & whistles. I thought I'd demo InDesign and CreativeCloud today and see how they worked for me on this machine.   They both downloaded completely, but InDesign crashes upon opening.  Are

  • How to create campaign Wiki

    Hi, Can anyone help me to understand whats is campaign Wiki and how to use it. Any sort of tutorial will be very much helpful Thanks, Abhijit