How do I set up my phone and iPad to recive messages at the same time?

I would like my messages to come to both my iPad and my iPhone when someone text me.

Welcome to the Apple Support Communities
To set up Messages to receive the same messages on your iPhone and iPad, on both devices, open Settings > Messages > Send & Receive, and only leave ticked one of your email address or phone numbers. You have to tick the email address or phone number where you are receiving your messages now, so the messages you receive will appear on both iPad and iPhone

Similar Messages

  • I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    I dont get sound for videos, games and music but ringtone still works. When i press volume buttons on side of phone i only get the picture of the nell and no little dots underneath. This is on my iphone 4s and ipad. It happened at the same time.

    Recurring theme with the 4s losing alerts except for the phone ringing.  Most complaints seem to center on the 7.1 upgrade.  The fix is dodgy, putting in a charger, playing a you tube video then pulling out the charger and wiggling it until you get the sound back.  When you get the sound back, the volume buttons start to work again.  Alternate solutions involve cleaning the docking port with a toothbrush, running a pick over the electrodes etc.

  • New IPhone and Ipad air are ringing at the same time...

    New IPhone and Ipad air are ringing at the same time, from incoming landline/mobile phones. Help please...

    That's a new feature introduced in iOS 8 called Handoff. You can start something on your iPhone and finish it on your iPad or Mac. You can make the iPad stop ringing by going to Settings>FaceTime on the iPhone and toggling off iPhone Mobile Calls. You can do it on the iPad also.

  • Phone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    Both my iphone and my husbands iphone ring at the same time when only one of us is being called. How can I stop this from happening?

    This post has already been answered. Why are you plugging your own site with an answer that has already been given? Not to mention that the information you are handing out is incorrect. There is no bug, there is no patch, and no one needs to delete any email addresses. If you take the time to read the posts with the correct answers, you will see that the solution is totally different than the erroneous one you have posted.
    GB

  • How to input/output a digital signal and acquire an analog signal at the same time?

    Dasylab, version: 8.0.04
    Acquirement Card: PCI1002L
    When I use DasyLab to acquire the analog signals is no problem without digital inputs and outputs,
    and when I use DasyLab to input or output a digital signal is no problem also, but when I do that at the
     same time, DasyLab tell me the rate is too high and stop.
    so, I searched the manual book1 (user guide) for that, it showed me :
    To internally equalize measurement time and system time in the analog input, digital input and counter
    hardware modules, use the following settings:
       Synchronization: PC Clock
       Sampling rate: <= 5Hz
       Block size: =1
    the problem is, if I set the Sampling rate to 5Hz, the speed of the acquirement datas is not enough for my
    application.
    so, how to improve it? who can give me a example programm for me. thanks!
    by the way, I come from China, my English isn't good, I'm sorry.
    Allen, China.

    Hi,
    Have things changed over the years?
    I need to syncronise a digital output (Modul NI9474) and an analoge input (AI-Modul NI9203) module. I need to measure time intervals from a flank in signal A to a flank in signal B. I would like accuracies of the order of 1 ms. Currently, the signals are not synchronised, with errors of the order of 2 times the block length (block size x sample rate), sometimes much higher. The best I got so far was a block size of around 20 with a sample rate of 1 kHz.
    If I use the master and slave settings on the RTSL settings, my program doesn't run properly.
    If I use digital signals for input and output, I can syncronise them with RTSL settings and everything is good, but I can't always do that.
    Also, if I do anything in the GUI (such as scrollowing something or going to another window), my output gets screwed up properly.
    1. What can be done to synchronise AI with DO?
    2. Is there something that can be done to avoid messing up the output when something happens in the user interface? (I know that I am messing up the outputs as they make some valves switch and that is loud).
    Thanks in advance!

  • HT5848 How do I listen to iTunes Radio and play other game/apps at the same time? On an iPad.

    Just got an iPad air and last night was able to listen to iTunes Radio and play some apps at the same time. Now today a software update, and no go on doing radio and apps at the same time....help!!!

    Anytime you open an app that has a persistant sound stream - a movie, a podcast, some games - it will overide the music app's stream. nothiong you can do to change it.

  • How do I set-up my IPhone and IPad to print wireless to a Epson xp-600 printer

    How do I set-up my iphone and ipad to wireless print using a epson xp-600 wireless printer. Instructions with the epson ask's to load the disc in each computor that you want to use this printer. Do I have to sync each device to the mac for this to happen

    Fortunately, the Epson XP-600 is AirPrint compatible!
    So this guide tells you the simple setup:
    AirPrint basics

  • I was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ?

    i was backing up my iPhone and importing photos onto iPhoto at the same time , then suddenly it says no more space available (i had 48GB before i do this and now i have 18GB) i can't find the back up or the photo anywhere , how can i delete them ? i dont need the pictures or the back ups , i want to delete them but they are not there

    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
    iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then reboot. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown asBackups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Reboot and it should go away.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install ODS in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
    The application window will open, eventually showing all files in all folders, sorted by size with the largest at the top. It may take a few minutes for ODS to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything while running ODS as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with ODS, quit it and also quit Terminal.

  • I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address.

    I installed an Extreme in place of an old Express, the various phones and Ipads seem to work on the WiFi but the Mac itself will not connect.  It says something about the IP address being used by another device.  Second wifi network was also created.  The Mac worked for a few minutes and then gaev up citing eth IP problem......any clues people??

    If you have not already done so, now would be a good time to perform a complete network power cycle.......to give everything a fresh start.
    Power off every device on the network.....computers, printers, hard drives, etc......in any order that you want
    Wait a full minute
    Start the modem, and let it run by itself for 2-3 minutes
    Start the next device connected to the modem and let it run a full minute
    Keep starting devices one at a time about a minute apart until the entire network is back up
    Check the network

  • How to play stereo mix music and sing in my mic at the same time?

    Hi guys, need help regarding Realtek HD audio driver
    I want to play stereo mix music and sing in my mic at the same time.... not for recording purposes but in chatroom let's say.
    I'm using XP...Toshiba Satellite S4747 laptop
    In the Realtek software under " Realtek HD audio input" I have mic and stereo mix both.... but I can only select one at a time.....
    Any solutions plzzz thxxxx
    On a different note.... a friend of mine whose using one non-Toshiba laptop with win XP has an older version of the Realtek audio driver and can select both mic and stereo mix at the same time... I downloaded that version into my laptop but I still can only select one at a time....

    Check the audio settings in Windows and dont forget in Realtek HD audio manager. You can find it in control panel.
    I think your microphone is set to mute so check this.

  • My I Phone 4 keeps putting me on hold or mute or hanging up on me from my face touching the screen. returned one phone and now my replacement is doing the same thing. this is crazy. my iphone 3 didn't do this!

    My I Phone 4 keeps putting me on hold or mute or hanging up on me from my face touching the screen. returned one phone and now my replacement is doing the same thing. this is crazy. my iphone 3 didn't do this! the screen is suppose to turn black when it is near my ear so that you can not do this and then turn on again when you pull it away. This phone is not doing this. 

    Are you using a case around your phone? If yes, did you make sure the proximity sensor is not covered?
    Try without the cover to make sure the sensor is working.
    A protection film on your screen can also cover the sensor and result in a dysfunction of the sensor.

  • HT204389 How do I delete my email messages and also delete my laptop messages at the same time, as I used to do with my Blackberry?

    How do I delete my email messages along with my laptop messages at the same time, as I used to do with my Blackberry?

    You need to configure the mail client to use IMAP instead of POP3 protocol.

  • When in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

    when in i-tunes 11 mac, how do i search for a song as well as a genre at the same time?

    If you mean searching for a song that you already have in your Library, then you can select "Music" first. Then, go across horizontally to Genres and select that; then by using the drop-down menu found under "View" & (of course) select "View Options"-- you will be presented with a limited # of choices to sort by.
    My iTunes 11.0.5 shows 4 parameters to choose from: Title, Artist, Year and Rating. Then you can sort & finally...
    Enjoy,
    mm~

  • It is possible to charge an iPad3 over USB and transmit data over USB at the same time?

    Hello,
    it is possible to charge an iPad3 over USB and transmit data over USB at the same time?
    If yes, how?
    Thanks
    Best regards

    OK!?
    That is right that the USB data oins are not connected to +5V pin.
    But i found a description for a self built power supply for iPad.
    http://timothyb.net/DIY_iPad_2_USB_Charger.html
    and
    https://www.mikrocontroller.net/topic/262610?goto=2726627#2726627
    The description say: data pin D- need a voltage level of 2V and D+ 2,857V
    when the data pins have this special voltage levels and VCC has +5V only then the iPad is charging.
    The voltage "D+/D- coding" is the key for the iPad to charge.
    OK now back to my problem.
    The regular USB data pin voltage level is 0,3 - 3.,0 voltage. When the iPad is charging the data pins have this special voltage level. Now i try to transmit data over the usb data pins with the. Normaly the USB port transmit the data with a voltage level of max. 3V.
    And here my problem. The higher voltage level at the data pins cares therefor that the iPad stop the charging.
    Is that correct?

  • When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    When my most front window is a safari one and I use the shortcut key "Command N", it opens a new finder window and a new safari window at the same time. Why does it happen?

    I just found the solution!
    Niel
    Re: Why is my Finder window popping up when I open my Safari window? 
    Jan 20, 2008 7:58 PM (in response to alak)
    Open the General tab of the Safari preferences and correct the home page; the default page is this one. If it has become set to a folder on an FTP server or a local drive, that request will be sent to the Finder. (28252) 
    iMac Late 2007 Core 2 Duo, Mac OS X (10.5.1)

Maybe you are looking for