How do I set up my printer so I can print from my ipad

MY printer is X-P 205 and I cannot set it up to print from my iPad. I do have a computer only an iPad

Hi Tyreen,
If you have questions about how to set up AirPrint so that you can print directly from your iPad, you may find the following article and setup assistant helpful:
Apple Support: AirPrint Basics
http://support.apple.com/kb/ht4356
Apple Support: AirPrint Setup and Troubleshooting
http://www.apple.com/support/iphone/assistant/airprint/
Cheers,
- Brenden

Similar Messages

  • I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign?

    I need to create 4 @ A2 boards that print adjacent to one another (all landscape format) with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards? Is it best to use Illustrator(CS3) or Indesign?
    Thanks.

    Re: I need to create 4 A2 boards that print adjacent to one another with a photo image running across all 4 boards.How do I set up the pages so I can see the whole composition together , then print the seperate A2 boards.Do I use illustrator (C3) or Indesign
    If possible, please try Indesign CS 4.

  • How do I set up my 3520 Deskjet to e-print in windows 8

    how do I set up my 3520 Deskjet to e-print in windows 8

    Hi,
    Please download and install drivers first:
       http://ftp.hp.com/pub/softlib/software12/COL42544/​al-108812-3/DJ3520_1315.exe
    then install the following ePrint software:
       http://ftp.hp.com/pub/softlib/software12/COL39376/​lj-96046-6/HP-ePrint-win-4.6.60.12747.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?

    I have justed upgraded CS2 to CS5. How do I set artboard crop or trim marks for printing?  It was under the "OBJECTS" menu in CS2, but I can't find it in CS5.

    it actually works the same way but better you don't see it that way but with perhaps more experience you might catch on and say "oh now I see that' all I have to do.
    Multiple artboards, which you did not have in CS 2 , changes the equation.
    When you open a new document you can set up a gangup in the new document dialog then say for a business card then do one business card in the first one.
    Then copy the art and text of that first one and in one command paste that art in all of the artboards with one command, you can then make another artboard that encompasses all the artboards and you now have a gang up say six up you can now print all a once as a gang up or print a range of the artboards or specific artboards.
    As a matter of fact now that you can paste on all artboards with one command AI CS 5 actually has a step and repeat feature that works verticaly and horizontally at the same time. And an improved version is easily had.
    Also since you probably know how many you need of this first artboard then you can simply make one rectangle for for the first artboard and give it a crop area effect and when you do your copy include the rectangle and then paste on all artboards and there you are
    look at the video, see how cool. less complicated not more complicated. And as other users explore this function I bet they come up with even better ideas.
    http://mysite.verizon.net/wzphoto/Artboards.mov
    I am going to make one adjustment here instead of doing a command c to copy the first artboard it would be better to do a command x to cut the first one since the command paste on all artboard does exactly that. So if you do a command c and a command option shift v then you have two rectangles and art and crop marks pasted on top of each other. Probably won't do any harm but might be confusing in the layers panel.

  • How do i set it to fit to screen to print the entire file?

    How do i set it to fit to screen to print the entire file?  I have a file that is smaller than 8.5x11 but it says it's larger and clipping will occur and when I print it, it does not fit the paper.  Ive even clicked the box that says Scale to Fit Paper Size and it's still giving me that message and cutting info off. 
    I also need to be able to size it by percentage so I can adjust it to fit into a pre made form Im working with.

    First, I am new to this forum and I was told by Adobe that I would get help from Adobe as well as other users here, so that's why I posted.  But nobody asked me for basic info about image dimensions and printing sizes.  I never claimed to be an expert, just a basic user of PS, which is why Im asking for help.  I've used this program for my basic needs which is probably 1/1000th of what PS is capable of, but it's what I've used and I've always had success doing what I needed to do with it. If you can help, I very much appreciate it but if you just want to slam me and say you don't believe what I say, then that's not really helpful. Since nobody else responded to this post with any offers for help, the info you seek is below.  If you have any thoughts on how to help, I greatly appreciate it.
    Im not sure how the image dimensions apply to my question at all but here they are: 3300x2550 with a 300 dpi resolution. 
    Im simply trying to get the program to allow me to fit the image to the paper Im printing and adjust it as necessary to make it fit a partially pre-printed form I need for work and in every PS version I've used that I can recall, it allowed that.  It certainly allowed it, using the same printers Im using now, in CS5.
    Also, you mentioned that the printer driver handles this but I can do this in every other program I have on this computer with the same printers, from Numbers (it's a Mac) to Preview to Mac Mail so why wouldn't it do the same thing in PS? That's what Im trying to find out here and with most software, I can pick up a phone or get on a one-on-one chat and get help, but apparently not with PS and since it's not a cheap program, I expected more.  I never needed to call for help before using this new version, so that's something I need to consider.
    Again, if you are able to help, I appreciate it. Thanks!

  • I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

    I can AirPrint from my ipad but my iPhone does not see printer ? Connected to same network. Is there some setting on the phone I'm overlooking?

    Answered this question with a reply from "how does an iphone forget a network" response

  • My wife has purchased an iphone 6. She has a different id. How do we set it up to share info on icloud with our ipad and my iphone.        use icloud on devises with different ids

    My wife has purchased an iphone 6. She has a different ID. How do we set it up so that she can share photographs, contacts and calender on my iphone, imac and ipad.

    You might see if this addresses any of your concerns ...
    Family Sharing
    ... and here is another discussion thread on it ...
    How to share icalendars, and contacts across users with iphones

  • How do I set up my icloud account to receive emails on my ipad ?

    How do I set up my icloud account to receive emails on my ipad ?

    Try this
    Setting > iCloud > Turn on the iCloud e-m
    iCloud: Set up iCloud Mail on your devices
    Best of Luck

  • How do I set up apple mail to only send messages from my address book to my inbox

    I have uverse internet and use an att.net. I am getting too much junk mail from business, etc. How do I set it up where I only get mail from my contacts in my inbox?

    Hello, not on 10.6 at the moment, but see if Mail>Preferences>Junk>Advanced has these setting choices...

  • How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

    Last night, when I played my playlist songs with iTunes Genius, my iTunes, with one of my playlists selected, and set on "Shuffle On," "Genius Shuffle On, "Genius On," "Match On," and "Play," played selections from all of my songs in my playlist. Today, my iTunes Genius went back to the same problem it was giving me before last night. My iTunes Genius has been playing selections from just a few of my playlist albums. How do I set up my iTunes Genius to play selections from all, not just some, of my songs in my currently playing playlist?

    No backup is a huge mistake.
    You can redownload some itunes purchases in some countries:
    Downloading past purchases from the App Store ... - Apple - Support

  • How do I set up my 3G to send/receive mail from MS exchange?

    How do I set up my 3G to send/receive mail from MS exchange?

    Welcome to the Apple Community.
    If you can't get your mail to work on Snow Leopard after June 30, you might want to try one of these approaches
    1. Configuring Mail in Snow Leopard
    2. Delete your mail account from Mail preferences and set it up again using the Mail Server Information.
    Some users have apparently encountered issues using this information in pre-Lion set ups (I haven't), Roger Wilmut has kindly provided instructions for those who find themselves with this problem.
    Entering iCloud email settings manually in Snow Leopard or Leopard

  • How do I add adobe reader to my printer so I can print a pdf?

    How do I add adobe reader to my printer so I can print a pdf?

    Are you trying to print to a PDF from Adobe Reader?
    If so, you need Acrobat for that. Reader doesn't not install a PDF printer.

  • How do i find out the ip address of my printer so i can print from my cell phone

    My phone asks for an IP address in order to print. How do I find the IP address?

    Re: how do i find out the ip address of my printer so i can print from my cell phone?

  • How do I set pages up so that I can type a script for a radio play

    here we go, that is if I'm not driven mad by the process of trying to work out how to use this help thing.
    how do I set pages up so that I can type a script for a radio play ie the character then as an indented bit what they say

    Here's a sample, using what should be a familiar script to any radio drama buff, and showing a few of the features you'll want to incorporate into your template.
    Features noted by arrows:
    This is the "First line indent" margin stop, in this case, set to produce a 'hanging indent'. This stop sets the starting position of the first line of a Paragraph.
    Left margin stop: This stop sets the starting position of all lines in a paragraph except the first.
    When setting margins, set this one first, as it will drag the First line indent stop with it when moved. After setting this one (by dragging it to the position on the ruler where you want it to be), drag the rectangle (First line stop) left as far as it will go.
    Right margin stop.
    Running Header: This is a combination of text that appears on every page, plus the page number / page count—very useful information when someone drops his script. (Typed here, but a combination of typing and inserting the two number calculators from the Insert menu in the actual template.)
    Tab character. Used to move the first line of the dialogue into alignment with the rest of that paragraph. The Left margin stop also acts as a Tab stop.
    Paragraph break (made by pressing the return key). After a Paragraph break, the next line of the script will start at the left margin of the page. To break a long monologue into smaller blocks, use a 'soft return', made by pressing Shift-return, as I've done twice here...
    ...to produce an empty line without creating a 'new paragraph' (or in this case, a new item on the current list.
    Those are the basics for producing the body of your script.
    Regards,
    Barry
    Sample script is an excerpt from:
    The War of the Worlds
    COLUMBIA BROADCASTING SYSTEM
    ORSON WELLES AND MERCURY THEATRE ON THE AIR
    SUNDAY, OCTOBER 30, 1938
    8:00 TO 9:00 P.M.

  • How do you set password so no one else can acces to you're internet on a wrt54gl?

    Yeah the subject says it all. How do you set password so no one else can acces to you're internet on a wrt54gl?

    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter... Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything... Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
    Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...

Maybe you are looking for