How do I set up my printer to air print

How do I set up my printer to AirPrint

Review this Apple Support page
http://support.apple.com/kb/ht4356
If your printer supports AirPrint you prettyd much just have to turn it on. Your iPad should find it.
Keep in mind though, that not all Wi-Fi printers support AirPrint. Check to see if your printer is listed in the AirPrint support page.

Similar Messages

  • How do i set up my iphone to my printer hp photosmart 5512

    How do I set up my verizon iPhone to printer hp PHOTOSMART 5512

    Hello,
    Thanks for the post.  With this one, you will need to get or access if already loaded, APPLE'S iOS download AirPrint.  I've included several links below with some excellent information regarding this method.  The first link is printing with AirPrint.  A great place to start.  Good Luck!
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&tmp_task=useCategory&cc=us&dlc=en&lang...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02759940&cc=us&dlc=en&lc=en&product=5063611&tmp...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02623193&cc=us&dlc=en&lc=en&product=5063611&tmp...
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02945411&cc=us&dlc=en&lc=en&product=5063611&tmp...
    I worked for HP but my posts and replies are my own....Thank you!
    *Say thanks by clicking the *Kudos!* which is on the left*
    *Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

  • How do I set up my MacBook Pro to print via wi-fi to my printer

    How do I set up my MacBook Pro to print via wi-fi to my printer?

    It is rather hard to know how to help you since, among other things, you didn't tell us what printer you own, what you've tried thus far, and what happened when you tried it. Your printer came with documentation and it may have even come with a disk that takes you through the process step by step. My first two suggestions are that you (1) make sure you know the password and SSID of your wireless router. You'll definitely need the password and you might need to know the router's ID name. (2) read and try to follow the instructions that came with your printer. In general, I've found that Canon and HP instructions and setup software are quite good while Brother wireless printers, at least in the past, have been rather flaky to set up (but work fine once that initial headache is dealt with).

  • How can I connect my printer without air print

    How can I connect my printer without air print to my ipad mini?

    Maybe.
    iOS AirPrint Printers  http://support.apple.com/kb/HT4356
    How to Print from Your iPad: Summary of Printer and Printing Options
    http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
    Print from iPad / iPhone without AirPrint
    http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
    How to Enable AirPrint on a Mac and Use Any Printer
    http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
    iPad Power: How to Print
    http://www.macworld.com/article/1160312/ipad_printing.html
    Check out these print apps for the iPad.
    Print Utility for iPad  ($3.99) http://itunes.apple.com/us/app/print-utility-for-ipad/id422858586?mt=8
    Print Agent Pro for iPad ($5.99)  http://itunes.apple.com/us/app/print-agent-pro-for-ipad/id421782942?mt=8   Print Agent Pro can print to many non-AirPrint and non-wireless printers on your network, even if they are only connected to a Mac or PC via USB.
    FingerPrint turns any printer into an AirPrint printer
    http://reviews.cnet.com/8301-19512_7-57368414-233/fingerprint-turns-any-printer- into-an-airprint-printer/
     Cheers, Tom

  • Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Connect to a network printer for air print, after disconnect from the wifi iphone keep pop up a message saying the printer is offline. How do I disable this annoying message?

    Hey ronniefai,
    Thanks for the question. I understand you are receiving a prompt that your printer is offline. This may be due to a printing job that is currently in the queue. Are you able to see the print summary when following these steps?:
    Viewing the Print Summary
    You can view the Print Summary by double-tapping the Home button and swiping to the right to reveal Printer Center. Then tap Print Center.
    Note: Print Center is available only while printing is in progress.
    via AirPrint Basics
    http://support.apple.com/kb/HT4356
    If so, see if you can cancel the job. If not, what happens when you re-connect to the network that the printer is on?
    Thanks,
    Matt M.

  • My IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    my IPad has stopped printing using air print and my HP Photosmart 5520 but my laptop is printing ok on the same system. any ideas? I have re-booted everything.

    Hi I have an HP printer. I use an APP called print central from APP Store. Used this for the last 2 years on 2 IPhones & 3 iPads with no problems. Cheers Brian

  • HT4356 I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi

    I have cannon mx870 it's not listed as an available printer for air print. Why it's only three years old and it has wi fi.

    Probably because it pre-dates Airprint technology.  The fact that it has wifi doesn't change anything if it isn't an Airprint-supported printer

  • HT4356 How can I set up a Canon MX410 to print from my iPad?

    How can I set up this printer on my iPad?

    If it is not an AirPrint enabled printer
    iOS: AirPrint 101
    you need an app to print via. Search the App store. Start searching for a  cannon printer app and general print app like Print Central

  • How do I set up my HP 7520 to print card stock off Avery 8859 design???

    Trying to print business cards after designing on Avery 8859 card stock design.  HP 7520 All in one will only print a test page of thumbnails of the business cards even though it shows the correct size, etc. for the 8859 paper.
     How do I set the printer for card stock, etc. as Avery describes, and what is going wrong??  I have wasted many hours, and lots of paper, and still NO BUSINESS CARDS!!!

    Hi @klmrazek,
    Welcome to the HP Forums! 
    I noticed that you are wondering how to set up your HP 7520 to print card stock off Avery 8859 design? I am sorry for the frustration, but happy to look into this for you!
    From what I can find, the card size you are using is 2" x 3 1/2". This is an unsupported paper size with this particular printer. According to your printer specifications, here are the supported card stock sizes:
    Card type
    Card size
    3 x 5 in Index
    76.2 x 127 mm (3 x 5 in)
    4 x 6 in Index
    101.6 x 152 mm (4 x 6 in)
    5 x 8 in Index
    127 x 203.2 mm (5 x 8 in)
    However, you might be able to get around this by assigning an alternate driver, by going through this post, How to Assign Alternate Print Drivers in Different Versions of Windows, by @Shane_R. Then try a custom size print by going through this guide, Create Custom Paper Sizes in Windows 7, Windows 8, and Mac OS X.
    Otherwise, I would suggest a different size of paper, within your supported sizes using the chart provided. Or you can also try contacting Avery Support, in case they may have additional software or drivers that you can try.
    Hope this information is helpful, and have a good day!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • How do I set up Sfax on mymphotosmart c310a printer

    How do I set up efax on my Hp photo smart c310a printer

    Hi nlb619,
    Unfortunately eFax is not supported on the C310a printer.
    I was an HP employee.
    Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks.

  • How do i set up the wireless option for printing rather than using an usb

    how do I set up wireless printing function on my hp photosmart C4780

    This should help: http://www.hp.com/global/us/en/wireless/reconfigur​ing-system-help2.html
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • How do I set up printer to air print from the iPad

    how do I set up my hp deskjet 3054 to air print?

    Hi,
    I can not find your printer in this list
       http://support.apple.com/kb/ht4356
    How old id it ?
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I set up pixels and resolution to print out my illustration?

    I want to print my illustration which I'm going to paint on Photoshop 5 to the size of 8x10(inch) at Walgreens.com.  How do I set up the pixels and resolutions in Photoshop to start with?
    There was a guideline at Walgreens Photo site, and it says "Minimum Recommended Image Resolution for 8x10 (inch) is 900x720 pixels."  But when I set up the width and height of pixels to 900x720 and resolution at 360 and then painted there, the print outcome was chopped off at top and bottom (I selected 8x10 print size.)
    How can I set up the right way so I can print right?
    Thank you!
    -Mitama

    OK, it says minimum requirements. Which makes sense, the quality would be horrible below 112 ppi.
    8" x 200ppi = 1600px
    10" x 200ppi = 2000px
    900px / 8" = 112.5ppi
    720px / 10" = 72ppi
    Can you see in the above math why part of the picture would be chopped off.
    Lets do it this way:
    900px / 72ppi = 12.5"
    720px / 72ppi = 10"
    900px / 360ppi = 2.5"
    720px / 360pp = 2"
    10" X 360ppi = 3600px
    8" X 360ppi = 2880px
    If you specify ppi you must specify the physical dimensions (inches) Especially when the printed paper is a known variable. The pixel dimensions they mentioned was a guideline not a requirement. They only wanted to make sure the quality did not fall below that value.

  • Dell 968w..how do I set the IP address for network printing?

    Attempting to connect my Dell 968w to the network for access by my HP and Dell laptops.  Dell said I need an IP address for the printer..how do I set the address??? 

    you need to contact dell printer support for this info...this is usually done by printing a network config page on your printer & you'll see the printer ip address there.
    Note:
    Although I work for HP Imaging & Printing
    Group , I am speaking for myself and not for
    HP.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • How can I set up a Dell AIO 922 printer on my Macbook Pro?

    I'm running OS X 10.9.2, and I've downloaded a lexmark 5200 series driver like others have said to do, but when I try to add a printer, nothing shows up.

    Hi jdmyp6!
    Here is an article that can help you set up this printer in Mavericks:
    OS X Mavericks: Set up a printer
    http://support.apple.com/kb/PH14143
    You can also use this following article to find the correct printer software to download for your printer:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/ht3669
    Thanks for coming to the Apple Support Communities!
    Cheers,
    Braden

Maybe you are looking for