How do I set up my Time capsule now I have BT Home Hub 4?

Has anybody had a similar problem? All I get no matter how I connect up is the flashing orange light on the front of my time capsule

what is the error??
You cannot solve these things without finding out what exactly is the issue.
For hh4 the TC should be in bridge.. and it will work fine.

Similar Messages

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How do I set up the Time Capsule without an internet connection

How do I set up the Time Capsule as a wireless hard drive without an internet connection. I am in a office situation in which I cannot access my work network. I need to be able to share files on the Time Capsule over the wire connection.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

How do I set up my Time Capsule as backup HD only.

How do I set up my Time Capsule to act as back up external Hard Drive only? When I connect to my current network it slows down transfers between my 3 HD Tivos set up on my network to a crawl! I don't want it connected to my network!

Bridge the TC.
First of all download and use the real utility if you haven't already. http://support.apple.com/kb/DL1482
Open utility.. go to manual setup..
In the TC setup go to internet tab..
Down the page find connection sharing.
Select off bridge mode.
Update the TC.
The TC now is a client in the network and will act as a HDD.
Wireless is up to you.. but it should not slow the connection. Certainly you can turn it off completely.

I changed my ISP, how I can Setting up my Time Capsule ?

Recently, I changed my ISP, how I can Setting up my Time Capsule again?

Hello. I jus tbought mine and will be setting up shortly. So I am only guessing here, based on how my airport extreme base station acted when I switched once. When you connect the ethernet to it, it should simply find the signal,a nd prompt you for the password information that you set up with the new ISP.
If not, please report back how it goes..

HT1175 how do you set the airport time capsule as the primary base station rather than as a network client?

how do you set the airport time capsule as the primary base station rather than as a network client?

The Time Capsule needs to connect to a simple modem......not a modem/router or gateway type of device that is often furnished by Internet Service Providers.
So, the first logical question here would be......
What is the make and model number of the device that you call your "modem"?

How do i set up my time capsule wifi for many users

hello ..
i have problem.. as always
my time capsule is connected to dsl modem (off(bridge mode)), in modem we can get only 10 ip adresses and no more. so when there are 10 pc connected to our wifi, no more can connect.... how can i set up my time capsule, so more people can join our wifi...? is it even possible?
P.S.
1) to our wifi is connected printer, so everybody can print...
2) every pc uses time capsule as bacup place in time machine.
tnx

You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
(Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
Then set DHCP for clients that will join.. this can then expand the scope of addresses..
It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

I want to set up the time capsule. I have a D-Link router for WiFi to laptops. Do I connect the time caps to the D-Link or in place of it? thanks

You've posted to the iPhone forum rather than the Time Capsule forum, but to save you some time, you can either replace your D-Link with it since it is a wireless N router, or you can set it up on your LAN as an additional wifi router with its own unique SSID. If you do the latter, be sure to connect your mac to the Time Capsule rather than your D-Link so it will support your Time Machine backups.

How can I set up my time capsule as the primary base station with a centurylink router? I'm trying to extend my coverage, increase signal strength, and be able to connect a printer.

I recently moved and now I'm trying to set up my Time Capsule as the primary base station or router with an existing network that has a Centurylink modem/router. The TC still has the settings for my old network. I also have backups on it. I have the data backed up to another HD so it's not an issue to return it to factory settings if doing so deletes the back ups. Do I need to restore it to the factory settings to set it up? Also, what settings would I select on the TC (and the Centurylink modem/router) in order for the TC to serve as the router, instead of the Centurylink router? I want to be able to use the TC to back up my Mac's, print wirelessly, and improve overall performance. I tried setting the TC up and ended with 2 different networks. Can anyone please help me with this?

The TC has to plug into the existing modem router by ethernet.. you cannot use wireless.
You have a choice of which is router.. only if Centurylink agree to bridge their modem router.. this has to be done by the ISP and often they do not allow it.
Is your broadband cable or adsl or fibre or ???
If it is cable and you are allowed to purchase your own cable modem pick a pure modem version with no router in it.. plug the TC into it by ethernet.
Setup the TC in DHCP and NAT mode.. (depending on broadband type).
You must reset the TC to factory to do the setup.. no files are lost at all.
Here is my current recommended setup.. with Yosemite life has become harder than ever.
Factory reset universal
Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
Setup the TC again.
ie Start from a factory reset. No files are lost on the hard disk doing this.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg TCgen5 and TCwifi for basestation and wireless respectively.
Even better if the issue is more wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking. If the TC is main router it will not be an issue.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
5. Mount the TC disk in the computer manually.
In Finder, Go, Connect to server from the top menu,
Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
You might need to do some more work on the laptop itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
Tell us how you go.
Someone posted a solution.. See this thread.
Macbook can't find Time Capsule anymore
Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
This user has had success and a few others as well.
RáNdÓm GéÉzÁ
Here is why Yosemite has fundamental issues.
http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

How can I set up a time capsule to extend my wifi network from a non-apple Medialink MWN-WAPR300N?

I just purchased a new Medialink MWN-WAPR300N from Amazon to replace my old 2008 500 GB Time Capsule.
I was wondering if it would be possible to use my old Time Capsule to extend the network from the Medialink router to the rooms in the back of my house. Would this be possible? How about if I use the Time Capsule as the primary point, and use the Medialink router to extend the network?
Thanks!

The Time Capsule would not be compatible with a Medialink product if you are thinking of trying to use the Time Capsule to extend the Medialink network using wireless only.
The same would be true if the Time Capsule were the primary router, and you tried to use the Medialink product to extend the Time Capsule network wirelessly.
If you can connect the two devices together using a permanent wired Ethernet connection, then you should be able to accomplish your goal.

I have been storing my music and photos in an external drive how to I transfer them to Time Capsule now that I acquired one?

I have been storing my music and photos in an external drive to save disk space in my computer. Now that I purchased the Time Capsule what do I have to do to transfer such files to my time capsule?

I have been storing my music and photos in an external drive to save disk space in my computer
How have you been backing up the data on your computer and the external drive up until now?
I assume that you want to use the Time Capsule to back up your Mac and the external drive. Is that correct?

How do I set up my new tc to work with my home hub 2?

Hi. This is my first time in this community, so hope I'm doing this right! I have a bt home hub2 and have just purchased a 2tb time capsule to go with my brand new iMac. Please help me to set up the tc to work with the bt home hub. I want to use the tc wireless capability and think I will have to set up a new network and switch off bt wireless, but I'm not sure. Bit of a novice at this kind of thing so any help you can give in nice simple steps would be greatly appreciated. Thanks in advance.

In UK BT generally use PPPoA authentication only so you will have to keep using the home hub as the main router. Put the Time Capsule.. TC.. in bridge mode. To do this go to the airport utility, on menu selection go to internet, and make sure it is set to ethernet for method of connection, and in connection sharing, select bridge. Then select update.. it will probably list some issues like password needing changing and access via wan etc .. almost all of which you can simply ignore.. as you are not using it in router mode.
The TC will save the setting and restart.. it will now exist as a wireless access point and switch on the network. The WAN is swapped to LAN, so there is no WAN port as such but it is still convenient to use WAN port marked <...> ethernet between home hub and the TC. Then setup wireless as you like. You can turn off the wireless in home hub, and just use the TC.. or use both, on different channels. That is no big problem. Set the security for the wireless is important and I would also manually set wireless channels and use different name for the 2.4ghz and 5ghz wireless. But just start and learn what you need to as you go along. Getting the basics working should be fairly easy. Some of the more complex stuff you just need to read carefully the instructions..
And read this site.
Carefully and until your eyes bleed. Almost everything you want to know is there already.
http://web.me.com/pondini/Time_Machine/FAQ.html
There are many areas he covers.
http://web.me.com/pondini/Time_Machine/Home.html

How do I set up my time capsule to multiple computer?

There are two macs in my household and one time capsule which is right now set up only to my computer. How can I set it up for the other computer keeping the privacy for both? Thanks

Do you mean you want to back up two Macs to the TC via Time Machine? If so, Time Machine makes a separate sparse bundle disk image for each Mac's backups on the TC, so they're kept entirely separate.
Normally, when you Enter Time Machine, you see only the backups for the Mac you're on.

How do you set up multiple time capsules in my home?

I have one time capsule for my information and my roommate has another. They are in the same room. How do I set them up so our information doesn't get confused?

I doubt you will have confusion.. if they have different names.. then network wise they will be fine.
ie You set up your TC named TCTom / TCJulia.. and the other person has his/her TCHarry / TCHarriet.. then clearly they are different..
You can have wireless issues though. If they connect via the same network.. then use ethernet and turn off wireless. Or make a pact and share wireless on one. ie the TC can be plugged into each other.. but wireless only working on one.. they will both be equally accessible and work equally well.

How do I set up my Time capsule now I have BT Home Hub 4?

Similar Messages

Maybe you are looking for