How do i set up my wireless printer to print using the internet from a remote location? 8500 pro

I have two offices and would like to print things off for my staff in different locations from my computer any place I am.  I understood that I should be able to do so with the wireless system.  What setting is not set proper?  

Hi,
The latest printers provide remote printing by the HP ePrint feature,
If your printer is the HP Officejet Pro 8500 (A909) as i can figure from your description, the ePrint feature unfortunately not supported by your printer.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • How can I connect personal hotspot to use the internet from my phone on my laptop?

    I do not have internet at home and want to be able to connect using the personal hotspot on my phone. How do i do this??

    How much would be a month?
           From: Verizon Wireless Customer Support <[email protected]>
    To: kelly johnson <[email protected]>
    Sent: Wednesday, October 8, 2014 12:02 PM
    Subject:  - How can I connect personal hotspot to use the internet from my phone on my laptop?
    #yiv3595356488 img
    |  
    |
      | 
    A message from the Verizon Wireless Community
      |
    |   |
    How can I connect personal hotspot to use the internet from my phone on my laptop?
    created by Verizon Wireless Customer Support in iPhone 4S - View the full discussion                  Hello kmj65
    Thanks for replying. The plan you have it would be an additional charge to add the hotspot feature. It's not free with the Nationwide plan. You would need to add the feature online at www.verizonwireless.com/myverizon
    JoeL_VZW
    Follow us on Twitter @VZWSupport   Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community Start a new discussion in iPhone 4S by email or at Verizon Wireless Community
    | 
    | 
    © 2014 Verizon Wireless
    Verizon Wireless
    One Verizon Way
    Mail Code: 180WVB
    Basking Ridge, NJ 07920
    Not interested in these emails anymore, or want to change how often they come? Update your email preferences by visiting https://community.verizonwireless.com/user-preferences!input.jspa.
      |
    We respect your privacy. Please review our privacy policy for more information
    about click activity with Verizon Wireless and links included in this email.
      |
    | 
    |

  • How do I Set up a LAN with no access to the Internet?

    I have a Solaris 10 (08/07) [No longer can acess the internet]
    full install on one system, and Solaris 10 Developer Edition (09/07) on another system. Each has been auto-configured upon installation, and have reached the Internet, and registered at Sun Microsystems, from behind a router and cable modem.
    I want to create a Local Area Network, using a 4 port Netgear Ethernet Hub, model EN104tp, Each of the Solaris 10 systems, a Windows XP Pro system, and a Windows Media Edition LapTop. +(Which I want to have additional admin control, and access to the Server, from!)+
    My problem is this!
    1) Do I have to change any files to eliminate, the access to the internet from the two Solaris machines via router and cable modem? If so which, and, how do I? +(I intend for the LAN to be isolated from the internet)+
    2) What are the step by step, to set up a LAN?
    I can't seem to find that info anywhere. Maybe I am looking in all the wrong places...
    I appreciate and Thank You in advance for any help...

    The only difference between LAN and Internet is the size.
    Depends on how you define LAN -- it may be multiple subnets glued with routers or just one big or small subnet with bridges, switches and/or hubs or simply a crossed UTP-cable..
    If you don't have routers then you won't need a /etc/defaultrouter (rm -f /etc/defaultrouter; /usr/sbin/route -fn)
    You should use RFC-1918 addresses; i.e. chunks with a suitable mask of your choice as parts or whole of 10./8 (10.0.0.0 - 10.255.255.255), 172.16/12 (172.16.0.0 - 172.31.255.255) and/or 192.168/16 (192.168.0.0 - 192.168.255.255). Example 10.0.0.0/255.255.255.0 for a (256-2=)254-node subnet; 10.20.30.40/255.255.255.252 would suite a crossed-cable subnet perfectly.
    A DHCP-server would be nice for PC's. Solaris can do that (/usr/sadm/admin/bin/dhcpmgr).

  • How do I set up for Wireless printing on a Mac

    Hi Guys,
    I have purchased the HP Laser jet P1102w recently.  I took the printer on a location job and used it for the first time.  It was quite a soimple process of connecting the printer and MAC automatically downloaded and installed the software.
    As we were out of the office, we were not connected to the wireless network and therefore was not able to set up the printer on the netwrok.
    Now that we are back in the office I want to set up the printer so that it can be used wirelessly by all the devices connected to the network.
    I am unable to work out how to do this on MAC OS X 10.6.8.  I removed the printer from the Print & Scan Utility and tried to install it again while connected to the network, however I am still only able to print while connected by USB.
    I understand that I can print via the connected device on the network but would rather have it set up to do so wireless all together.
    Please can you point me in the direction of finding the instructions to set this up?
    All help is most appreciated.
    This question was solved.
    View Solution.

    Hi @EI2014 ,
    Make sure Safari is set as the default browser. Sometimes the Embedded Web Server won't open in other browsers.
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Clear out any old network settings on the printer.
    Turn the printer off, hold down the wireless button and cancel (x button) while turning the printer back on and don't release the two buttons until the printer stops making noise.
    Print out a configuration report and make sure the SSID and IP address are cleared.
    Printing a Configuration Page.
    Connect the USB cable from the printer to the Mac.
    Go to the Apple, system preferences, print and fax.
    Double click on the P1102w.
    Open the utility.
    Click printer setup.
    Click HTML config.
    This should open the Embedded Web Server for the printer.
    Click the Networking tab.
    Click Wireless from the list on the left.
    Under Communication Mode , click Infrastructure.
    Select your network SSID from the Available Network Names (SSID) list and then click the << button so the network name moves over to other box.
    From the Security Mode pop-up menu under Authentication , click WEP, WPA/WPA2 or open . Your selection depends on which Wireless Security Protocol your network uses.
    Make sure you select either hexadecimal or alpha depending on your password. (very important)
    Apply the settings.
    In the confirmation box (changes have been saved), click OK.
    You should get a solid blue light on the printer shortly.
    Then all we have to do is delete the USB driver and add the network driver.
    Click on the Apple.
    Click system preferences.
    Click the print and fax icon.
    Highlight the printer and click on the - sign to delete the printer. (USB driver)
    Disconnect the USB cable.
    Then click the + sign and select the printer from the list and click add. (p1102w bonjour)
    Test the printer.
    If you have any issues with the HTML config opening then do the following steps:
    Close any applications.
    On the Apple menu bar, click Go, computer, MAC harddrive, Library, Printers, HP, LaserJet, click on folder for your printer, click on EWS browser or HTML config, click the Networking tab, click wireless on the left and fill out your information. (make sure infrastructure is selected) Apply settings.
    Then delete the USB driver and add the network printer.
    Test the printer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do i set up my wireless printer to work with my ipad 2

    My ipad will not reconize my lexmark wireless printer what can I do

    In UK BT generally use PPPoA authentication only so you will have to keep using the home hub as the main router. Put the Time Capsule.. TC.. in bridge mode. To do this go to the airport utility, on menu selection go to internet, and make sure it is set to ethernet for method of connection, and in connection sharing, select bridge. Then select update.. it will probably list some issues like password needing changing and access via wan etc .. almost all of which you can simply ignore.. as you are not using it in router mode.
    The TC will save the setting and restart.. it will now exist as a wireless access point and switch on the network. The WAN is swapped to LAN, so there is no WAN port as such but it is still convenient to use WAN port marked <...> ethernet between home hub and the TC. Then setup wireless as you like. You can turn off the wireless in home hub, and just use the TC.. or use both, on different channels. That is no big problem. Set the security for the wireless is important and I would also manually set wireless channels and use different name for the 2.4ghz and 5ghz wireless. But just start and learn what you need to as you go along. Getting the basics working should be fairly easy. Some of the more complex stuff you just need to read carefully the instructions..
    And read this site.
    Carefully and until your eyes bleed. Almost everything you want to know is there already.
    http://web.me.com/pondini/Time_Machine/FAQ.html
    There are many areas he covers.
    http://web.me.com/pondini/Time_Machine/Home.html

  • How can I use a wireless printer and the internet at the same time?

    Hi there, I just installed a wireless printer but to use it I have to click on the Airport icon and select the printer in the 'devices' list. This deselects my connection to my wireless modem. Is there any way I can print and look at the internet at the same time? This does not seem right to me, I print a lot of info from the net and don't want to spend time selecting and waiting for connection back and forth all the time.
    Bo

    I have a Linksys WAG54G2 wireless G router. This router has a Wireless Protected Setup button which I understood would initiate a search for wireless devices and aid setup but it seems to do nothing. I made the mistake of tryig to use the linksys installation disk to access a setup wizard and that just reset my entire network back to factory settings and it took me 4 hours to reconfig my system. Won't be touching that again. It all seems odd, the printer is compatible with the router as far as I can see but I don't know how to get the router to recognise the printer.
    bo

  • I have  20 ipads to hand out to teachers, all of them are using the same apps (purchased), I'm using 1 computer to configure them, I purchased 20 gift cards to purchase apps, how can I set up all 20 on one library using the gift cards to purchase the apps

    My office purchased 20 ipads - and 20 gift cards, I'm setting up all the software on my computer using 1 itunes library.. I need to purchase 20 of the same apps to put on each of the ipads... how can that be done when you purchase the same app..itunes tells you that you the app is already purchased...

    Another member pointed me toward the following site...it contains some great info...it's focus is on the use of iPad's in education....
    http://ipadeducators.ning.com/
    There is some discussion in there of device "cloning"..though I don't see how they can do that and at least not technically violate the iTunes Store EULA....(1 license can be used by 1 person on multiple devices, or by many people on one device).  As I understand it, and as Michael indicated, the only way to do what you want and not violate the EULA is to have 20 different Apple ID's...what the "cloner's"  have chosen to do is use the Educational VPP  www.apple.com/itunes/education
    purchase sufficient licenses for all users, allocate a license to one Apple ID, clone that image to other iOS devices, and simply record the fact internally that the additional  license(s) have been allocated to other Apple ID's....I work in healthcare, and our legal department isn't comfortable with that approach, and I can't see it really being legally viable in education....unless their are different terms for educational institutions....

  • How can I set up different profiles (accounts??) using the credit card?

    Each member of my family would like to have there own itunes profile (or account??), but we'd like to use the same credit card. Is this possible? Does each family member need a unique email address for log in.
    Thanks
    Markoman

    So my sister and I have our own separate iTunes accounts, and she has her set up with her credit card. She let me use her credit card on mine but it keeps saying the security code is invalid. Then the credit card company called about her credit card activity. Are you sure it's not impossible to use the same credit card on our different accounts?

  • How can I set a default save file for scans using the Solution Center?

    Using Windows 7 - 64 bit.   HP Photosmart Premuim C-309a All-In-One Printer.
    Because of a Windows crash, I had to install a new drive and reload Windows. I also reloaded other software like the HP Solution Center & Drivers. My problem is that I can't find how to set a default folder for my scans.  This is NOT mentioned in the user manual but it was originally accomplished by HP Tech Support when the printer was new.  Can anyone relate how to set default folders for my scans?
    Thanks.
    Tango
    This question was solved.
    View Solution.

    Here is a document on how to scan through Windows 7. 
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03476857
    Click either solution center or the icon of the printer on your desktop. Here select "Scanner Actions" (or the analogous selection). When the window pops up from the HP software it should provide you with options for file type (.tiff, .pdf, .jpg) as well as resolution and media size. Here on this page there is also an option for you to go to the advanced options. Using this you can alter the default safe folder. 
    Let me know if that helps you out! 

  • Set Invoice status to printed using the SDK

    Hello Experts,
    Do anybody know if its possible to set the Printed property to "Printed" of a A/R Invoice with the sdk for Sap Business One 2007 And / Or 8.8 and successfully update a document.
    We are still using v2005 and this property is in read-only.
    Thank you!
    Simon

    Hi Simon,
    The printed property is still read-only in 2007A and 8.8. I don't think that's likely to change so the only way to change the value is to print the document via the UI.
    Kind Regards,
    Owen

  • Setting up a hp 6600 wireless printer for the ipad

    How do you set up a wireless printer on an iPad?

    If your printer is AirPrint compatible, then it should pretty much work out of the box after you install the software on your computer and set up the wireless settings for the printer. Sometimes you need to upgrade the firmware on the printer before it will work.
    If your printer is not an AirPrint compatible printer, you need a third party printing app or you need to install an app on your computer that will let you use the computer as your print server.
    AirPrint Basics
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    PrintCentral for iPad on the iTunes App Store
    Collobos - Presto

  • Hi - have lost my Install DVD for my macbook Pro - can I use the one from my husbands Macbook or how do I get a new one??

    Hi
    Have lost my Install DVD for macbook pro and need it because my computer black out all the time - can I use the one from my husbands macbook (not pro) or how do I get a new one???

    10.6 Snow Leopard ?
    You can call Apple and order one.  1-800-275-2273
    You cannot use an install dvd that is shipped with another computer.

  • How do I set up my Epson printer to print wirelessly from my Mac Pro

    How do I set up my Epson printer to print wirelessly from my Mac

    Hello:
    You need to go to Epson for specifics (is your printer set up for Airprint, etc).
    Barry

  • How do I set up a wireless network at home??

    Hi,
    I am new to Mac's. I want to set up a wireless network at home, but I have not got a clue about AirPort, what it is or what it does!?! I am getting a new Mac, but my wife is currently using a Dell Windows laptop and our daughter is using a Windows PC. How do I set up a wireless broadband network at home which works with my Mac and my familys PC's? What do I need to buy and what do I need to do with them? I already have a broadband connection at home. Currently, my wife's PC is connected directly to the broadband modem (via an ethernet cable) that was supplied by the brodband company when I signed up to broadband.
    Thanks for all your help with this.

    scooter has provided links to Apple's pages for the AirPort Express and AirPort Extreme base station (AEBS).
    Both of these devices are IEEE 802.11g wireless routers (also called base stations). If you have an Ethernet connection to the Internet (for example DSL or cable modem), you can connect either of these devices directly to that connection and create a wireless network. Since Ethernet and IEEE 802.11g are worldwide standards you can connect any compatible device (including PCs running Windows).
    Every computer needs a unique IP address. You can think of an IP address as a street address for your house. A unique address guarantees that items addressed to you get to you.
    Typically ISPs provide users with a single (one) public IP address. A public IP address is visible to anyone on the Internet. A router uses the single IP address provided by the ISP and creates multiple local (non-public) IP addresses for you computers. This allows you to use multiple computers.
    If you need to connect both wireless and Ethernet computers you will need the AEBS. The AEBS provides a separate LAN port for Ethernet computers.
    BTW, you can accomplish the same thing with any inexpensive wireless router.
    The advantage of the AEBS over other routers is (a) built-in 56k modem for connecting to a dial-up ISP and (b) USB port for a single compatible printer.
    The advantage of the AirPort Express over other routers is (a) sound output port for streaming music to a stereo and (b) USB port for a single compatible printer.

  • Setting up a wireless print function for a Samsung S5

    Can someone please walk me through setting up the wireless print on the Samsung S5? I have already set up my wifi to find the HP printer however, I can not seem to get anything to print whatsoever. Ready to throw this printer out the window.,

    Hi @
    Thedeb1
    Welcome to the HP Support Forums. I see that you would like to learn how to print from your Samsung S5 to your HP printer.
    To better assist you, would you please supply some additional information:
    What model and product number of HP printer do you have? How Do I Find My Model Number or Product Number?
    How is the printer connected (USB cable, ethernet, or wireless)? I’m just looking for confirmation that the printer is connected to your home wireless network still.
    Was the phone connected to the same wireless network that the printer is connected to?
    What version of operating system are you using on your phone? If you are unsure how to find this information, please follow the steps in wikiHow’s How to Figure out Your Mobile Operating System
    Are you getting any error messages? If yes, what do they say?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for