How do I set up my WlFi Personal Hotspot?

Apple
How do I set up my WlFi Personal Hotspot?

I don't understand your question. It makes no sense.
If you want to set up your personal hot spot on your iPhone simply call Verizon wireless and have them add the feature. It is $30 for 2 GB of data.
However certain Verizon plans have the hotspot feature included with your cellular plan. Call 1-800-922-0204 or *611 and ask customer service.
If what you wanted was to hook into your home WiFi simply make sure the WiFi toggle is set to on, select the name of your home network and connect. You will need to know your password for your home network to connect.
Good Luck

Similar Messages

How can I download or use my personal hotspot?

I want to use my personal hotspot in this iPad? How?

Your tagline shows that you have an iPad2. You can't use the personal hotspot with the second generation iPad.
http://support.apple.com/kb/ht4517

Cannot set up iPhone 4S personal hotspot with Toshiba 940.

I have connected my Toshiba Tecra 940 Windows 7 to iPhone 4S via USB cable and the laptop recognizes the iPhone. Within the iPhone settings, I turn on personal hotspot (previously I have set up a compliant password for this feature). When I go into the Intel wireless proset connection program on the Toshiba, I do not see my iPhone in the display of network devices to select. even when I go into the Windows network connection and sharing Center. I do not see the iPhone listed. Any article or technical paper on this that you know of would be appreciated. Thank you. Carl

See these documents.
iOS- System requirements for Personal Hotspot
iOS- Understanding Personal Hotspot
iOS- Troubleshooting Personal Hotspot
In addition contact your carrier if they allow Personal Hot Spot in the plan you subscribe to. You need to input APN Settings

How do I get back my missing Personal Hotspot on My ipad mini?

I had t before and I don't know what I did but its missing. I tried resetting Network settings, restoring but nothing works.

You have it turned on in Settings > General > Cellular > Personal Hotspot ? And you haven't switched to a different tariff with your carrier ?

I've got 2 phones an iphone 3gs and i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me add vpn configuration or set up internet tethering/ personal hotspot or portable wi-fi

I've got 2 phones an iphone 3gs i updated it to an ios 6 also an android phone since updating my iphone 3gs to ios 6 it wont let me connect or add vpn configuration or set up internet tethering/ portable hotspot or portable wi-fi but i have no problems connecting or adding my android phone to tethering or portable hotspot

http://support.apple.com/kb/HT4517
http://support.apple.com/kb/TS2756
if those two links don't help then contact your phone carrier.

How do i set password for one folder ?

my mobile is nokia e51 , how do i set password for my personal folder ?
Message Edited by shajeer on 25-Jun-2008 08:21 PM

how do i use Advanced Device Locks to password-protect the gallery, or individual applications. ? thank u ...
Message Edited by shajeer on 26-Jun-2008 08:00 AM

How do I stop someone to use my personal hotspot even thtough they have ised it before

How to stop someone from using your personal hotspot even though they have accessed to it before.

Try going to Settings > General > Reset > Reset Network Settings. Then set up Personal Hotspot again.

How to keep my personal hotspot on always with no changes to off?

HI,i have two devices and i want to keep the personal hotspot on all the time. How do I have to keep the personal hotspot on all the time and not to be changed In case I want to track it? Thank you

If you are using the Music App, it should continue to play the songs while playing solitaire, unless the game app settings prevent it, which I really doubt.
Quit both apps - Music and Solitaire and reboot the iPad.
Go to the home screen first by tapping the home button. Double tap the home button and the recents tray will appear with all of your recent apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button or anywhere above the task bar.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Try again and see if it works properly.

Can no longer connect iPad Mini 2 to iPhone 6 Personal Hotspot (iOS 8.1.2 on both)

I can no longer connect my iPad Mini 2 w/ iOS 8.1.2 to connect to my iPhone 6 (iOS 8.1.2, Verizon Wireless) running Personal Hotspot.The iPad displays the error "Remote Hotspot Failure - Unable to start personal hotspot "iPhone. However, my Windows 8.1 laptop connects to the iPhone just fine. The iPad connection problem occurs with or without the Windows laptop connected or even turned on.
Both the iPhone and iPad have Bluetooth and WiFi on, and the iPhone has Hotspot active. The iPad shows the iPhone Personal Hotspot on the WiFi Settings page, but throws the error each time i attempt to connect. Additionally, the iPhone shows 1 Connection on Personal Hotspot even though I have no devices connected. I have reset my network settings twice on both the iPhone and iPad.
BTW - I used to be able to connect the iPad to the Hotspot prior to updating to iOS 8.1.2 on both devices.

Forgetting the hotspot on the iPad sent me in the right direction. I now have it working correctly, and seem to have diagnosed the cause.
The cause seems to be that I had connected the iPad to the Hotspot via Bluetooth. Once I figured out how to delete that link, I was finally able to connect to the Hotspot. Here is what I had to do:
On the iPhone:
- Turn on WiFi and Bluetooth
- Turn on Personal Hotspot and change the Hotspot password (this may not have been necessary, but things are now working)
On the iPad:
Reset all network settings:
Settings -> General -> Reset (at bottom of page) -> Reset Network Settings (deletes all known networks and their passwords and restarts the iPad)
Turn on WiFi and Bluetooth (I had found that Bluetooth must be on is necessary in some other research)
DO NOT CONNECT TO THE PERSONAL HOTSPOT USING BLUETOOTH - DON'T GO THERE!
Connect to the Hotspot using WiFi
Settings ->WiFi
- Wait until you see "iPhone" under PERSONAL HOTSPOTS (or maybe CHOOSE A NETWORK)
- Select "iPhone"
- Enter the (new) password that you set on for the PERSONAL HOTSPOT on the iPhone
You should now be connected via WiFi
Bottom line: Unless you have some VERY compelling reason to connect to the Hotspot via Bluetooth, NEVER do it. WiFi speed is multiples that of Bluetooth. With WiFi using Broadband Speedtest over Verizon LTE - 2 bars/dots - I am consistently getting between 15 and 20 Mb download and 3-15 Mb upload. With Bluteooth using the same test, I was getting about 1 Mb maximum upload and download.
I hope this solves the problem for all reading this thread. And thank you ManSinha for the helpful clue.

I can't connect my personal hotspot using wifi,I can able to find my iphone4 but it's just showing obtaing ip adress ??wat can I do for this problem??

I can't connect my personal hotspot using wifi,I can able to find my iphone4 but it's just showing obtaing ip adress ??wat can I do for this problem??

Hey there arunvdi,
It sounds like you are unable to connect to the Wi-Fi created by your Personal Hotspot. I recommend these troubleshooting steps from the article named:
iOS: Troubleshooting Personal Hotspot
http://support.apple.com/kb/ts2756
Try disabling and reenabling Personal Hotspot from Settings > Personal Hotspot or Settings > General > Cellular > Personal Hotspot.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Wi-Fi troubleshooting
If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try the following:
Turn Personal Hotspot off.
Verify Wi-Fi is on in Settings > Wi-Fi.
Turn Personal Hotspot back on.
If another device is unable to join your Wi-Fi network, ensure that the user enters the Wi-Fi password correctly. If the device cannot see your Wi-Fi network, verify your device name.
Note: Windows may not properly display a device name that uses non-ASCII characters.
Verify how many devices are currently using your Personal Hotspot. Depending on your wireless carrier and, the maximum number of Wi-Fi connections may be limited to three at one time.
If the other device still cannot connect, try turning Wi-Fi off and on again on the device. Verify that your device can see other Wi-Fi networks.
Note: If you see an "Unable to Join" or timeout error when trying to connect a device using Wi-Fi, ensure that you remain on the Personal Hotspot screen until the first device connects. After a device has connected, you can leave the Personal Hotspot screen and use your phone normally. Your device will automatically stop broadcasting using Wi-Fi if you put your device to sleep or after 90 seconds elapse with no devices connected using Wi-Fi. You can start broadcasting your Wi-Fi network again by tapping Settings > Personal Hotspot.
If none of the previous steps resolves your issue, restore the iPhone.
Thank you for using Apple Support Communities.
Regards,
Sterling

Can't find my Personal Hotspot after upgrading my iPhone 5 32gb to IOS8.1........ Please I need a solution.

I can't find Personal Hotspot after upgrading my iPhone 5 32gb to IOS8.1......I have searched everywhere and still cannot find it .. Please I need a solution.

Hi Rayhiggs,
Welcome to the Apple Support Communities!
To set up and use Personal Hotspot please use the attached article for the process. If Personal Hotspot is not showing as an option in Settings > Cellular, it may be necessary to contact your carrier as described in the article.
iOS: Understanding Personal Hotspot - Apple Support
Cheers,
Joe

How can I set up personal hotspot on iPad 3

How can I set up personal hotspot on iPad 3, I use 3G services from Etisalat SIM

If your carrier supports the personal hotspot on the iPad (and some carriers only support it on the iPhone) then it should appear in Settings > General > Cellular Data > Personal Hotspot - if it doesn't appear then contact your carrier in case they don't support it or it might be an extra fee/subscription with them
Personal hotspot : http://support.apple.com/kb/HT4517

How can I set up a form for someone to fill out on another person's behalf?

I am trying to set up a form in which someone is asked to fill in the form for another person. Basically, we're asking people if they're still our primary contact. If they are, it's a simple blind form confirmation. If they're not, we are asking them to please tell us who is. So it will take them to a form where they can tell us who is the new contact. However, I don't want cookies for the new person to be attributed to the person that filled out the form (as that would then mess with segmentation, lead scoring/nurturing, etc). We also need to see who is the person filling out the form, so we know who the new person is replacing. So we'll need to collect the name and/or email address of the person filling out the form, in addition to the name and email address of the person they're adding.
I know this can be done, as at a previous company we had a form that was used internally to add people who called in sales inquiries, so that we could capture them as "submitting an inquiry" as if they had just filled out a form. For example, I would fill out the form after someone called in asking for product information, but the online behavior of that person would not be attributed to me even though I filled out the form from my computer. Unfortunately, I can't recall how this was set up. Does anyone have any ideas on how this could be set up?

Hi Abby,
The easiest way to do this is to set up two forms:
The first form is for your primary contact, who will submit the email address for the secondary contact and any additional contact data for the secondary contact. You can also include a field (hidden or otherwise) for the primary contact if you wish to record this form submission activity, but functionally this is not required.
A second form which will accept the secondary contact's email address and any other contact info you'd like to capture through this process.
The trick is that once you've got these two forms saved, you add a form processing step to the first form called Post Data to Server. In this processing step, you fill in the details for the second form, including making sure to map the secondary email address field on form 1 to the primary email address field on form 2. The URL will need to be the POST action url for the secondary form, which you can get from the integration details. You'll also need to append your SiteID and Form Name, and also a variable to disable cookies for this submission (elqCookieWrite). The final URL should be something like this:
https://s1886.t.eloqua.com/e/f2?elqSiteID=1886&elqFormName=Alt2&elqCookieWrite=0
My organization is 1886, so you'll have to replace this with your Site ID
My secondary form name is Alt2, so you'll have to replace this with your secondary form name
elqCookieWrite=0 ensures the secondary form will not try to associate the session with the ElqGUID (cookie)
In the secondary form, make sure you have the processing step Update Contacts - With Form Data.
Now when submitting form 1, you'll see a submission to both forms, and the contact info submitted to form 2 creates a new contact (or updates an existing one) with no ties to the current session/cookie used to submit form 1. You can add these contacts to a shared list, enter them into a separate campaign or program, or anything else you could do with a normal form submission.
One caveat to remember though is that since this person did not submit the form, you have not technically collected any permission to contact them, so you'll have to sort that out with whatever rules apply in your area (your use case seems to be for existing customers which is generally OK, but you should still check).
Hope this helps,
Richard

HT204053 How do I set up a second Apple ID? Our office wants to use the iCloud calendar, but I don't want to use my personal Apple ID.

How do I set up a second Apple ID to use iCloud? My office is going to use the iCloud calendar on our PCs and I don't want to use my personal ID. Thanks for any suggestions.

You really don't want to do that, operate an iPad with 2 different ID's.
I'm presuming you have a work iPad and you want to put some non work bought apps on it. You will have issues, like half the iPad not working while the other half does.
Probably not something you want to explain to your IT department.

How do I set up a two or three column schedule in iCal? Looking to have multiple person listing appointment times.

How do I set up a two or three column schedule in iCal? Looking to have multiple person listing appointment times.

How do I set up a two or three column schedule in iCal? Looking to have multiple person listing appointment times.

How do I set up my WlFi Personal Hotspot?

Similar Messages

Maybe you are looking for