How do i set up myhp4500 to run wirelessly

how do i set up my officejet 4500 to run wirelessly

Hi,
You can use the printer control panel to setup:
1. Press the Setup button.
2. Press an arrow button to move to Wireless Menu, and then press OK.
3. Press an arrow button to move to Setup Wizard, and then press OK.
4. Follow the display instructions to complete the setup.
There are few youtube videos, you can use Google to search for "setup hp officejet 4500 wireless" (sorry youtube is blocked on my laptop, I can't show them here).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Using an own function in a select how can i set that the function run once?

Hi
Using an own function in a select how can i set that the function run once, not in every row?
Please help me
Thanks
Viktor

Something like this ?
SQL> select * from dept;
    DEPTNO DNAME                          LOC
        10 ACCOUNTING                     NEW YORK
        20 RESEARCH                       DALLAS
        30 SALES                          CHICAGO
        40 OPERATIONS                     BOSTON
SQL> create or replace function ret_name (deptnum in number) return varchar2
2 is
3     name    varchar2(50);
4 begin
5     select dname into name
6     from dept
7     where deptno=deptnum;
8     return name;
9 exception
10     when no_data_found then
11             return('Not existent deptno');
12* end;
SQL> /
Function created.
SQL> select deptno, decode(rownum,1,ret_name(deptno),null) dname from dept;
    DEPTNO DNAME
        10 ACCOUNTING
        20
        30
        40
SQL>

How can i set print mode at run time in smartforms???

Hi expert,
In smartforms how can I set print mode at run time.
I have one screen.In this screen one check box is there.If user select that check box then print should be come double side otherwise it is coming single side.
If it is possible then plz give me answer asap.

Hi,
Set These settings
While calling smartform, paas control_parameters and output_options as mentioned below and set
user_settings = ' '.
It will send the smartform output to spool.
DATA: wa_output_options TYPE ssfcompop,
wa_ctrl TYPE ssfctrlop.
wa_output_options-tdimmed = 'X'.
wa_output_options-tddelete = 'X'.
wa_output_options-tdimmed = ' '.
wa_output_options-tddest = 'LOCL'.
wa_ctrl-no_dialog = 'X'.
CALL FUNCTION lv_fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
control_parameters = wa_ctrl
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
output_options = wa_output_options
user_settings = ' '
x_adrp = x_adrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF sy-subrc 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Regards,
Kumar(Reward if helpful).

How do I set my computer to accept wireless instructions from only my computer?

How do I set my computer to accept wireless instructions from only my computer?

Please provide the following relevant information so someone can help including:
Printer Model -
Detailed Problem Description -
Operating System of computer (including service pack revision) -
Connection Method - USB, Hardwired LAN, Wireless? -
Make and model of router and modem? -
Error messages - on printer screen and/or computer, any blinking light patterns.
If wireless, status of Blue Wireless light on printer, on, off or blinking? -
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

How do i set my movie to run 4 minutes total? all images are in but it wont let me change time. Goes from 5 seconds straight to 1 minute each?

Imovie how do i set the images so that the entire thing hits 4 minutes in length? Ken Burns wont stay disallow Black either? such a pain in the .....Help!

One way to allow you to set the duration of the pictures to a shorter length is to go to iMovie Menu > Preferences > Check the box titled: Display time as HH:MM:SS:Frames
This usually will free up the Duration slider and let you set the pictures to exact length you need. And I'm sorry but I'm not quite familiar with disallow black for the Ken Burns effect. Are you trying to get a Black background to appear in the course of the video clip.

How do I set up an imac on wireless network?

How do I set up an imac on a wireless network if i don't won't to run an ethernet cable through the floor? I have an airport express and airport extreme. The extreme is used as my home wirless base station.

I have the airport extreme set up as my base station. Is it possible to plug the express into the wall, connect the ethernet cable from the imac to the express and expect it to work?

How do I set a slideshow to run in a loop on an iPad?

I have uploaded images to my iPad. When I run a slideshow of images I cannot find a way to do continuous play of the slieshow.
Is there a waY?
thanks-

You need to go to:
settings then
choose photos,
there is a option that says repeat,
slide it to on.

How do you set up a new APTC wireless network to seamlessly replace an older APExt Base Station wireless network

I have an older Airport Extreme Base Station and it currently generates our existing wireless network. I am interested in setting up a new 2TB Time Capsule. It seems as though the new TC would replace the older AP Ext Base Station in generating a new, higher performing wireless network, with the old AP Ext Base Station repurposed as a network extender out into the backyard where the current Wi Fi signal is weak.
Naturally, we have a lot of devices now using the existing wireless network. Is it possible to set up the new wireless network with the new TC using the same name, password etc, as the existing wireless network, so we are not required to deal with all the devices, not to mention the group of visitors who connect when they are here. If so, how do I step through the process? Can the older AP Ext base Station then be used to extend the new, same-named network? Thank you for your help.

However, the Alert message I'm getting says that the content of the Time Capsules can't be modified. This is where I run into trouble.
Click on the Time Capsule icon to reveal a folder representing the drive. Double click the folder to mount the drive on the desktop.
The first time that you do this, you may see a "Not Connected" message. Click on "Connect As" and enter the device password for the Time Capsule.
Then drag/drop files onto the drive icon on the desktop, or to the open window there.

How do I set up the MX430 for wireless printing

My printer was working but then was turned off. Now I can't get it to print mode. How do I get it out of copy, scan and fax and back to print?

Hi Mbutterfly, (The unit that you are using is part of the MX430 series of printers. Your specific model is either the PIXMA MX432 or PIXMA MX439. In my reply, I use the PIXMA MX432, but the steps are the same for the PIXMA MX439.) Uninstalling the network port and printer driver and reinstalling them will resolve this issue. To do this, please follow these steps:
1. Put the PIXMA MX432's CDROM in the CDROM drive. If the welcome screen appears, exit it.
2. On the Start Menu Screen, place the cursor in the upper right hand corner to expose the Charms Menu.
3. Click on Search.
4. Type RUN. Click on APPS and then click on RUN in the Search Results on the left hand side.
5. Click Browse. In the Browse window, click on "Computer".
6. Double click the CANON_IJ CDROM.
7. Double click the folder named WIN.
8. Double click the folder named Driver.
9. Double click the folder named DrvSetup.
10. Double click the file named DELDRV. If you are using the 64 bit version of Windows 8, please double click DELDRV64.
11. In the Run box click OK and then follow the on-screen prompts to remove the driver.
Once complete, please follow these steps:
1. On the Start Menu Screen again, place the cursor in the upper right hand corner to expose the Charms Menu.
2. Click on Search.
3. Type RUN. Click on APPS and then click on RUN in the Search Results on the left hand side.
4. Click Browse. In the Browse window, click on "Computer".
5. Double click the CANON_IJ CDROM.
6. Double click the folder named WIN.
7. Double click the folder named Driver.
8. Double click the folder named LAN.
9. Double click the file named CNMNPU.exe
10. In the Run box click ok.
11. Follow the prompts to uninstall.
Once complete, restart the computer.
Please follow these steps to download the necessary files to begin installation:
1. Visit Canon's website at: http://www.usa.canon.com/cusa/support/consumer
2. Type PIXMA MX432 in the "Enter Your Model Name" box and click GO.
3. On the Support page for your unit, click the 'Drivers & Software' link in the middle of the page.
4. Under Recommended for You, please click on the MX430 series Mini Master Setup.
5. If you agree, please select the checkbox next to "I have read and agree to the terms of the Disclaimer and wish to continue with the download".
6. Click on the Download button.
7. A File Download box should appear at the bottom of your web browser. Click Save.
8. Once the download is complete, open the Downloads folder.
To install the unit for use over your network wirelessly, please follow these steps when the computer restarts:
1. Press the <Setup> button on your PIXMA MX432.
2. Use the left or right button to select Device Settings and press <OK>.
3. Use the left or right button to select LAN Settings and press <OK>.
4. Use the left or right button to select Wireless LAN Setup and press <OK>.
6. Enter your WEP key and press <OK>. Please verify the WEP, as it is case sensitive and if entered incorrectly, will cause the printer and router to not communicate. To switch between letters and numbers, press the * key.
7. Press <OK> on the confirmation screen. The PIXMA MX432 will search for the access point.
8. When found, press <OK> on the Connected to the access point screen.
9. Back on your computer, double click [mast-win-mx430-1_1-ucd.exe] to begin installation of the drivers.
Follow the prompts and installation will complete.

HT4356 How do I set up iPad to use wireless Kodak printer?

I have iPad 2. looked at air print instructions but Kodak printers are not listed. can I not use iPad with printer that is not listed?

As noted, most Kodak printers are not air print enabled (if not all) but there are work arounds.
First, Kodak has apps that may do what you want done. Search for Kodak in the app store (just make sure they print documents if that's what you need, most of hte ones I saw the last time I looked only printed photos)
Second, Kodak has a partnership with Google Docs that allow some options. Such as the ability to e-mail your document to some models. Or to have a program on a comptuer that's hardwired to the printer, you mail/upload the document from your iPad, then download to the hardwired comptuer that then prints. (I didn't dig too deeply because I just didn't need yet another online account)
Third, third party apps. I use Print n Share, others recomment Printopia or Print Central.
I have a 7250 and use Print n Share and it works just fine with my Kodak printer.
Look on the Kodak site, under the support part and for info specific to your model and see what options you have for your model printer.

How do I set up my SSID to wireless router

Have HP3052A J611g printer that I cannot get to connect to my 'Clear' brnd wireless router. It is a plug in and go to electical outlet, There are no buttons on this unit..
My Mac Air Book does recognize this printer with correct model number in tact, but cannot connect.
I do have a SSID number from my Clear internet connection product. I cannot find a way to get my HP printer network name to match this wireless outer network name (SSID) exactly.
I can get the printer to get the wireless connection to 'on', but goes off on it's own within seconds.
Please advise.

Ensure that the Airport base station is configured to not distribute IP addresses.
On the iMac
System Preferences > Sharing > Printer Sharing
On the PowerBook
Applications > Utilities > Printer Setup Utility
Add Printer
It may work with the HP driver (which you will need to install on the PowerBook)
It may work with a third-party driver such as the HPIJS drivers or the Gimp-Print drivers, but this is not the case with all printers.

HT1751 I need to set up iTunes to run on my local network, independent of the internet because of a bad internet connection.

I have Hughes Net, for internet. Due to this, iTunes in the cloud, does not operate for us. I need to put my music on a local drive, and create a network drive, to use iTunes, while at home. (I'm still not sure about how I'll handle the music on our iPhones). I have a current AirPort Extreme, (802.11ac), and I have a 64gb flash drive, as well as a 1.5TB external SATA drive, that can be used. I'd like to NOT have to keep the MacBook Pro powered on all the time, but would still like to play music, through/on my iPads and iPhones, while at home.
How can I set this up, to run, independent of the cruddy internet service, which won't allow me to stream a single song, without stopping to buffer, for multiple long periods, during one song?

itunes can share music over the network without an internet connection, but you will need a computer running itunes powered on to be able to share it (setup in itunes by going to file (windows) or itunes (mac) > preferences > sharing)
if you just want to setup a network attached storage drive for the network that holds all the music that would be done independently of itunes and you would need a compatible NAS drive (I don't believe the airport is technically a nas drive but you could ask that section of support communities as well https://discussions.apple.com/community/wireless/airport)

Secondary monitor on 20"iMac, How to set portrait orientation when running

How do you set the display rotation in Windows XP?
I have a secondary monitor (wall-mounted at 90 degrees to normal) that OS X handles just fine (the display preference window provides a rotate function). However, when running Windows XP, the secondary monitor is still available, but I can not find a setting that will rotate the display. I downloaded the Apple Boot Camp ATI driver from AMD's site and the driver version went from 8.39 to 8.43. Still no visible way to rotate the secondary display. I then upgraded Boot Camp to 2.1 after which the ATI driver version went to 8.45. Still no rotate functionality.
I have tried using the ALT-OPTION-ARROW key with no success (recommended on some obscure Windows XP forum). I also downloaded the Apple Boot Camp Crystal Control Center from the AMD site, but it would not execute after installation (this upon yet another obscure recommendation).
I also have Windows XP on my MacBook. It uses an NVIDIA driver and it will allow display rotation.
Any help or advice is appreciated.

Updating my original post:
I have resolved the issue. The ATI Catalyst Control Center app (I meant Catalyst, not Crystal in my original post) needs Microsoft's .NET Framework 2.0, which was not included in my original Windows XP installation.
After downloading and installing the .NET Framework 2.0 package and reinstalling the Catalyst Control Center app, I am now able to rotate the secondary monitor display to the portrait orientation.
I use the secondary monitor primarily viewing on-line documentation while working with an application on the primary screen. The portrait orientation provides a much better environment for reading documentation as I can view 2+ pages at the same time.

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

How do i set up flash player to run only the audio files

How do I set up the flash player to run only audio files? Every time i set up I tunes to work,, the flash player takes over all files that it wants and I cannont see my files for work. I want it to only auto run audio files and not my GIF's, & TIFF files.

Well I had a terrible brain burp!,, I ment to say Quick Time. In my business I have to go back at times and view TIFF files. Every since I installed ITunes on my new computer... Quick Time opens the files where MS Photo Viewer used to, and I can only see page 1 in Quick Time. This is a problem for me as the only way I can view my TIFF files is to save them to my desk top and then open them in MS Photo Viewer. Then I have to delete them after viewing.. I view files several times a day and this extra step has become a very larg pain in the fanny.
Thanks

How do i set up myhp4500 to run wirelessly

Similar Messages

Maybe you are looking for