How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Set up your "main" router to use the OpenDNS servers, and the Time Capsule will automatically pick up those settings. No configuration is needed on the Time Capsule.

Similar Messages

How do I set up a virtual server with a time capsule?

I am trying to set up a wireless camera in my house to be viewed from away from the house.
I cannot seem to figure out port forwarding/virtual serving on the settings of my time capsule. I had no issues doing it with my old router. Does time capsule have that abilty?
I have Macs and PCs,

I figured it out.

How do I set up a guest network on my Time Capsule?

how do I set up a guest network on my Time Capsule?

If that is the case, then......
Open Macintosh HD > Applications > Utiltiies > AirPort Utility
Click Manual Setup
Locate the Guest Network tab located just below the row of icons and click on it
(If you do not see a Guest Network tab....you likely do not have the Time Capsule connected to a simple modem)
Enter a check mark next to "Enable Guest Network"
Type in a name for the Guest Network
Enter the password and confirm
Click Update to save your settings and Time Capsule will restart in 25-30 seconds

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

How can I set up a guest WiFi network using Time Capsule and Airport Express extension?

Sorry, but it is not possible to "extend" the Guest Network using either wireless or an Ethernet connection.

TS1253 I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

I have a printer epson TX210, but it doesn't work with my time-capsule. What need to do?

What have you tried?
You are going to get nowhere quick with the 6.1 utility in Mountain Lion if this is the only OS you have available.
Look up how to install 5.6 utility under ML. At least then you can see printers. That is assuming you are trying to use USB.
Has this worked ever on Mountain Lion? Did you download the drivers for that printer for ML?
Plug it into a computer directly.. does it work? If it doesn't work locally it sure will not work via the network.

Wifi Working With New Time Capsule But Can't See It To Configure Settings?

I had an airport extreme but recenlty purchased an airport time capsule. When I initially plugged it in, by airport utlity saw it and it asked me to set up a password. But then I noticed there was no internet signal getting to the time capsule. We wound up replacing the DSL Router and now the internet is up and running. But now when I open the airport icon, the time capsule doesn't even show up. When I open the airport utility through finder it shows the time capsule but blocks me from accessing anything. So I can't go into any set up configuration for changing passwords, setting up guest network or setting up the back up to the time capsule. I don't see any downloads for a new utility for the time capsule, so I'm assuming it's the same as for the airport extreme? What do I need to do in order to be able access the configuration areas?

Reboot the TC.. it is hard for poor OSX to find it.
No luck.
Just press reset and start again.
Do a new clean setup.. please use all SMB names this time, short, no spaces and pure alphaumeric.
Ensure ipv6 is set to link-local on both the wireless and ethernet if you use it. Wireless is essential even if you use ethernet you cannot do setups without wireless.
Still got trouble??
What is the OS on the computer and therefore version of the airport utility.. you will have huge problems with Mavericks.. as that is its nature.

Photosmart C4780 won't work with new Time Capsule

All of our household machines (2 MacBooks and 1 iMac) worked just fine to print wirelessly to our HP Photosmart C4780 with our time capsule, 1TB. The hard drive on that failed, and we replaced it with a new 2 TB model. Everything runs fine off the new wireless network except for the printer. The printer is not hooked to the Time Capsule, and I don't want it to be as it's in an odd location. The printer worked just fine before, off by itself in a corner, not hooked to any computers or Time Capsule. We are running OS 10.8 on 2 machines and OS 10.6 on another. I've read every troubleshooting article and community post I can find, trying everything, and no luck. I've restarted everything. I've reset the printer network settings. I've deleted all printers from the computers, but in every case, the printer cannot be detected on the wireless network. I run the Print & Scan utility in System Preferences, and the printer is not located. I run the HP Setup Assistant, and it can't find the printer. If I hook it up via USB to any machine it works fine, and I even tried running the HP Setup Assistant to setup wireless via USB, and that can't find the wireless network either. The Time Capsule is on all default settings, exept I changed the name and password. Neither has any special characters. I tried the suggestion of channel 11 and that didn't work. I printed out the wireless network test report, and the Network Name (SSID) Found diagnostic failed. I printed out the HP Network Configuration Page and it says network Offline, URL for embedded web server is http://0.0.0.0, and the 802.11 Wireless status is Disconnected. At the bottom where it lists the Number of 802.11 networks discovered, my home wireless network is at the top of the list. I know wireless is enabled on my printer because I've disabled and enabled it, plus the blue light is on above the wireless icon.
I cannot think of anything else to try and I'm about to launch the printer out the window! Please help in any way.

You're close. After opening Airport Utility/TimeCapsule/Edit, look at the bar at the TOP of the page for Airport Utility, not at the top of the inset box. That Base Station drop down has the WP Printer option. I'm using 6.3.2. Try that.

How do I set up photoshop to work with a touch screen?

Hi,
I just bought a 15.6" Asus Q500A touchscreen laptop with Windows 8. I downloaded photoshop and the 'touch app plug-ins' through the Adobe Application Manager for creative cloud. When I open a file in PS and select the brush(or any other) tool if I use the touch screen to drag it accross the canvas nothing happens. It still works with my mouse though.
How can I get this to work properly?

That does not surprise me. As I wrote Photoshop does not support Touch. It has supports for graphic tablets pens with wintab device drivers. It has support for mice and keyboards. No where do I see touch support documented in Photoshop manual. Here is a link to Photoshop manual search it for touch, http://helpx.adobe.com/pdf/photoshop_reference.pdf The closest thing I found to touch support is the following:
========================================================================================== =======
Use the Rotate View tool
You use the Rotate View tool to rotate the canvas non-destructively; it does not transform the image. Rotating the canvas can be useful for any
number of reasons, including facilitating easier painting or drawing. (OpenGL is required.)
You can also use rotate gestures on MacBook computers with multi-touch trackpads.
1. In the toolbox, select the Rotate View tool . (If the tool isn’t visible, hold down the Hand tool.)
2. Do any of the following:
Drag in the image. A compass will indicate north in the image, regardless of the current canvas angle.
In the options bar, enter degrees in the Rotation Angle field. Click or drag the circular Set Angle of Rotation control.
3. To restore the canvas to the original angle, click Reset View.
For a video on the Rotate View tool and other workspace tips, see www.adobe.com/go/lrvid4001_ps. (Discussion of the Rotate View tool begins at the 5:10 mark.)
Disable trackpad gestures (Mac OS)
If you have a MacBook computer with a multi-touch trackpad, you can use the trackpad to flick, rotate, or zoom images. This functionality can
greatly increase your efficiency, but you can disable it if inadvertent changes occur.
1. Choose Photoshop > Preferences > Interface (Mac OS).
2. In the General section, deselect Enable Gestures
========================================================================================== ===========
My Wacom Intuos 5 Touch device driver has some touch support for some Photoshop features. I do not try to finger paint I use the Wacom pen for that. I also do not get the strange finger paint in Photoshop when I use my finger to move the mouse cursor with the Wacom Intuos 5 touch support. Starting outside an image window or inside one,
However if I add two finger support add tap to click I can finger paint and also use other tools. However I'm not into finger paint so I do not configure Touch support that way for Photoshop.

WiFi no longer working with new Time Capsule-can you help please?

Hi all,
Just received my new Time Capsule (TC). It was a little problematic setting up, but probably due to my now choosing to increase my security from WEP to WPA as the TC set-up assistant suggests. Since then, I have had numerous problems getting my other computers and now my iPhone to connect with WiFi.
The problem is that despite entering all the new settings and WPA passwords for my connection with the TC, the iPhone will either momentarily recognize and go to wifi or simply stay on Edge.
On the former, with wifi active, as soon as I go to iTunes, Safari or check email, it reverts to Edge. On the latter, despite resetting, entering password, or tapping Settings and selecting my wifi connection, it will NOT connect and stays on Edge.
(Now, I'm on Edge! I'm bummed that with new hardware I have new problems that didn't exist before!)
Can someone who had this same problem tell me how they resolved it.
Here's the one clue I have, but would rather not resort to: When I first set up the TC, I had it on WEP with a WDS Network, and everything was working great and FAST! Now that I have increased the security—I will be backing up 3 computers to the TC—my iPhone and other computers seem to have intermittent or no wifi connection as a result.)

Irving Gonzales,
If your computers are 802.11N capable, you might want to try an advanced setup that might help your Time Machine speeds some. I have not personally tested it, so it is just a personal theory at this point.
First, in a mixed environment the 802.11N clients all get slowed down.
First, configure the TC for 802.11N only.
Second, connect the Airport Express via ethernet to the Time Capsule
Third, configure the Airport Express for bridged mode (doesn't give out IP addresses), and for its own wireless network with a different name than the Time Capsule.
Have any 802.11b/g clients like the iPhone join the Airport Express' network.
Thank you,
Nathan C.

Setting up an Airport Express with a Time Capsule

Merry Christmas! I received a new Airport Express for Christmas. My intention is to use it to stream music to my stereo. I have to admit that setting the AE up was not as simple as I had hoped it would be. I do have it working but I would like someone with more experience in this area to validate what I have done.
My wife and I each have MacBooks and we have a Time Capsule as our base station in the den. I would like to use the AE to stream music to my stereo which is in the living room. I would also like the AE to act as a "booster" to my TC, which I think is called "Extending a wireless network".
Here are my questions concerning the settings I have used in Airport Utility:
In TC, under AirPort, and the Wireless tab, I have checked the box for "Allow this network to be extended". Is that necessary?
In AE, under Airport, and the Wireless tab, there are a number of choices in the pulldown for Wireless Mode. I know I do not want to "create a wireless network" since that is what my TC is for. But all three other choices seem valid for what I want to accomplish -- Participate in a WDS network, Join a wireless network, or Extend a wireless network. I chose Extend a wireless network. I also checked the box under Network Name that says, "Allow wireless clients". Are these settings correct?
Here's the problem I'm having with things set up as I described above. AirTunes works fine. But if we close either of the MacBooks (put them to sleep) and open them in the living room which is closer to the AE, we seem to lose internet connectivity. When we open a browser or click on a link, it starts to load but then freezes. If I then walk the MacBook into the den, closer to the TC and restart the Airport or put it to sleep and wake it, its fine. Also, if we work long enough in the living room closer to the AE, it will also loose connectivity. I can sit in the den near the TC without any dropping.
Any suggestions on what the proper Airport Utility settings should be for my TC and AE would be greatly appreciated.

Your biggest mistake is confusing signal strength with signal quality. The signal indicator indicates strength and nothing else. You need to be using iStumblr to look at SNR (Signal to noise ratio).

How do you replace a Virgin wireless router with a time capsule?

Hi Folks
i have just bought a brand new 1tb time capsule yesterday and im trying to connect it too my virgin modem and replace the virgin wireless router i already have.....i thought it would be an easy setup of just plugging in the ethernet cable into the time capsule..but this has not worked??..can this be done?? i have restarted all devices too!...i am now clueless!
the the time capsule has backed up my hard drive (mac book pro) with no problems!
kind regards
kathdol

Are you talking about a separate modem and Virgin router, rather than their wretched 'Superhub' (modem and router combined) - the latter is a whole different can of worms.
Assuming the former, you should be able to remove the Virgin router and plug your Time Capsule into the modem: you will need to power down the modem and leave it for a few minutes (to forget the MAC address of the Virgin router), then plug in the TC and power up the modem. Make sure that the TC is set to 'Share a public IP number', not 'Distribute a range of IP numbers' or 'Bridge mode'. (If the interface is the same as the Airport Express it's 'Manual Setup'>'Internet' (in the toolbar)>Internet settings.

Bt Home Hub (fibre optic) can it work with my Time Capsule & Airport Express?

I have just moved house after having no problems for years with my virgin cable I have now had to switch to Bt because cable is not available at my new address therefore I would like first and foremost to have my Time Capsule available to use as a hard drive, I am not too bothered about wi-fi as that comes from the bt hub, only thing is I am at a loss how the Time Capsule hard drive is not working. Also is there anyway the Bt Hub can connect/link to Time Capsule or even Airport Express.

Your TC can be used bridged to the BTHub.. and plugged in by Ethernet.
It is best to still use the TC wireless for the express to extend and you will find access easier.
Always best to start with a factory reset when you do this.. The TC remembers too much from its last configuration.

How do I set external monitor to work with my G4 iMac?

I just bought a 22" Proview LCD monitor to use with my iMac b/c it's monitor is pretty much gone. It did not work for six months, then came on for 1 day and went out again.
Long story short, since I've hooked up the new monitor when I print in iPhoto the pictures come out too dark and the color is not what it used to be.
How do I fix it so my monitor's calibrations match the original? Or, whatever I need to do to fix it.
I print a lot of pictures and I need this to work correctly.
Thanks.

Snoot, welcome, your new monitor just needs to be calibrated. From the finder under the Apple scroll down to System Preferences, Click the Desktop & Screen Saver icon and set the desktop picture to a Medium Gray.. You can change this back when you are done. Now go back by clicking Show All and click the Displays icon, then choose Display in the upper tabs and set your preferred resolution. Set your monitor brightness at about medium (if there is one) and at Colors choose Millions. Now choose Color from the upper tab and select Calibrate. Choose Expert Mode at the introduction and follow the on screen instructions. After making all of the Hue,Value and Saturation adjustments your must save the setting back to the Display profile.
Also some applications have monitor selection in there preferences, so just make sure that you choose your present Display Profile for that particular application.
Joe
Mac Pro 2.66 Ghz Mac OS X (10.4.10) Users (RAID 0), PM G4 (10.3.9, PM 6500 (10.2.8)

I have a time capsule how do i set it up to work with an AOL router

I have a 2TB time capule and it worked fine for a while. Then it lost conection to the aol router we use. Can you give me instruction on how to set it up again. or give me some idea of the problem.

There are three different levels of reset.
If a basic restart doesn't work, start over with factory reset.
http://support.apple.com/kb/HT3728

How do i set up firefox to work with my adobe

My adobe reader or pdf won't open right it's telling me to set up firefox but i don't know how help Sylv

Hi Sylv
Please refer : https://support.mozilla.org/en-US/kb/use-adobe-reader-plugin-view-or-download-pdf-files

How do I set up OpenDNS to work with my Time Capsule running 7.7.3 in Bridge Mode?

Similar Messages

Maybe you are looking for