How do I set up printer for3-5/8 x 6-1/2 envelopes

how do I set up printer for3-5/8 x 6-1/2 envelopes

Uni52,
I used a different manual for that printer, see pg 136, there I noted an envelope called " No. 6 3/4 Envelope (92.2 mm x 165.1 mm; 3.63 x 6.5 inches)". Seems like a match!!!
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

How do I set my printer to black and white ONLY?

I have an HP Photosmart All-In-One C4480. I don't want to have to buy color cartridges, because I only need black and white, and I have three black and white cartridges already. How do I set the printer to print my documents in black and white only?
Thanks,
TW

Hi,
Follow the steps below to print using Black Ink only:
1. From the application used to print, click the File menu and select Print. The Print window appears.
NOTE: The Print window might be minimized: Click the Show Details button to see all available settings.
2. To access the color options, click the lowest selection box listed as the name of the program (e.g. TextEdit)
Will appear as Copies & Pages within Microsoft Office applications.
3. Select Paper Type/Quality from the drop-down menu.
4. Click the triangle next to Color Options to expend the settings.
5. Set the Color field as Grayscale.
6. Set the Grayscale Mode as Black Ink Cartridge Only.
You may save the settings for future use by clicking Presets > Save Current Settings as Preset...
Any used preset will remain default so simply select teh standard preset to print in color.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

How do i set up "print to iPhoto" from pages

How do i set up "print to iPhoto" from pages

lamen88 wrote:
How do i set up "print to iPhoto" from pages
I wasn't aware that you could do that directly. Did you see that witten somewhere, or are you asking if it is possible?
My approach would be to Print to PDF, use Preview.app to export the PDF to PNG and drag the PNG file into iPhoto.
Regards,
Jerry

How do I set the print area in Numbers?

How do I set the print area in Numbers?

Hi Macuser4ever,
Numbers does not have the 'Set Print Area' feature. Numbers is designed around several tables, each with a purpose. For example, Input Table, Big Database, Intermediate Calculations Table (all of which you may not need to print) and a final Summary (Presentation) Table that you may wish to print. The Summary Table can be on its own Sheet. Arrange objects (Summary Table, Charts [graphs] and whatever) on one Sheet and print only that Sheet.
If you are using Numbers 3.x (Layout View and Print View missing) try this User Tip:
Print Layout Guide for Mac Numbers 3.2
Regards,
Ian.

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

How can I set default printer options on an iMac for an HP pro 8500 printer to print in draft mode?

When you use the Canon driver, the 2 sided printing is set in a different location. There is an entire menu dedicated to it (at least on my mx892). The printer dialog box has a menu selector in the middle of the screen (I think it says "layout" by default). If you click on it, you will see the duplexing options at the bottom. Much more flexibility than the single checkbox available with "airprint". The interface is unusual (at least for me) but you can pre-set up many different configurations (Fast Duplex, Fine Single-sided, B&W, Photo, etc etc.)

In printing from download how do you set your printer to print a pdf file without having to save it

i am using a HP OFFICEJET4500 G510g printer. i am usinmg a program that i am allowled to retrive prepareed documents that are pdf formated. my question is how to set my printer to print these pdf formatted document without having to save the document first

Hi there alpo64,
Could you provide the community with a little more information to help narrow troubleshooting? What operating system and browser are we using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

How can I set up printing to queues on a Windows 2008 server directly from the iPad apps and not from third-party applications without using AppleTalk or Bonjour?

We have a Windows 2003/2008 server-based network with a dedicated print server which we would like to be able to print to over Wi-Fi. How can I set up the printers on the iPad without downloading a third party application such as Print Central or Print N Share? I want to just click the arrow and "Print" then choose the printer, which doesnt show up. I want to be able to use the existing TCP/IP-based network that we have to reach these queues, not having to install Bonjour or AppleTalk to reach them.
Thanks,
KMQ7

This would really be the "Holy Grail" right now. I think this a feature that every large organization requires. AirPrint works on a small scale, but is not really an enterprise class application. In addition it uses the Bonjour discovery process which is difficult in a large LAN WAN environment. For those that would remind me, I am aware of the enhancement link

How do I set the print and paper size in iPhoto 5

Can somebody please help. How do you set up iPhoto 5 so that you define both the the size of the print and the photo paper you use?
For example, I wish to print a 4.5cm x 3.5 cm photo on 6x4 (or 15cm x 10cm to keep all the units the same) paper.
I've seen a post saying how to do it in iPhoto 8, but the drop-downs are different.

I do not remember the locations in iPhoto 5 but there are probably three places to mess with
1 - set the paper size
2 - set the print size
3 - set the paper tray for the printer to use that has the paper size that you set in step 1
these may be in the print sequence or under the file menu as page set up (or similar). If these are not obvious try the Help menu
LN

HT1218 how do I set my printer to print remotely or through wifi?

How do I set up the computer to print on my printer through wifi?

Ok, I am assuming that you have already configured the HP printer to connect to the wireless network provided by your wireless router. Also that you have installed the latest printer drivers from HP for this printer on your iMac. Finally, I am also assuming that you have properly configured your iMac (using System Preferences > Print & Scan) and that this specific printer is recognized by your iMac. If all of these are true, then printing from your iMac should work.
Note that the steps for the Windows PC will be different, but basically the same.
Since this is an issue for multiple network clients I do not believe the issue will be router related, but printer driver, or printer configuration.

How do I set up printer to air print from the iPad

how do I set up my hp deskjet 3054 to air print?

Hi,
I can not find your printer in this list
http://support.apple.com/kb/ht4356
How old id it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Hello, i want to ask how can i set my printer canon mg2200 ? osx 10.9

Hello, i want to ask about setting printer
I use printer Canon Pixma MG2200
How can i set the driver of my printer for my macbook pro with retina display
thank you so much

http://www.usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all _in_one_inkjet_printers/pixma_mg2220_w_pp_201#DriversAndSoftware

How do I set my printer to print in landscape?

When I print what do I do to get it to print in landscape?

Thank you for your reply. However, I could not get Templates to work correctly for me. Following your instructions, I opened my document, opened Page Setup, set the printer, paper size, orientation, and printed a copy to make sure it was right. Then I re-opened Page Setup to verify that the settings were still correct. Then I saved the document as a Template. Then I found my template in Pages, opened the template, and tried to print. The first thing I noticed was that the template did not remember my printer. Then I set the printer, and printed, but I found that the template also did not remember the page size or the document orientation. So, did I miss a step here? Lion 10.7.5 and Mac Mini.

How do I set up printer network with my two macs?

I tried to find an answer to this "newbie" question but didn't seem to find exactly what I am needed to know.
We have a desk top Mac G5 (Tiger) that belongs to my partner (lets call that Jim's Computer) which is connected to an HP 6310 printer via USB. I have a new Macbook (Leopard) that I use exclusively with the Airport terminal. I need to be able to click print on the laptop what ever office I am in, and go to the main office and get my page off the printer. Both computers are on the same connection, the airport is a branch off the main hub.
We have set both computers to "share printers" on all accounts. My Macbook sees "Jim's Computer" and will subset it so I can actually see all three user files on his computer (Jim, mrbarth, B&B guest). I can easily access my folders and files in my accounts from computer to computer via Airport this way. I can not, however, use the printer function. I also need to point out that his computer is password protected for his account(Master) but I have access to both my account and guest account files if this makes any difference.
Here is how I have both computers set up. Please tell me what I am doing wrong or what I need to add to make this work.
On the main Desktop (w/printer attached) I have the printer Info which states its location at "Jim's Computer", its host name with a "lot of numbers plus our Internet service provider's CC.shawcable.net". It is set on the master and other accounts to share printer. On my laptop I have (under options and supplies) Location "Jim's computer" and host name "localhost". I also have the printer configuration to share on my Macbook.
Do I need to somehow change the location of my Macbook configuration to read something like: "Jim's computer/mrbarth" or "Jim's computer.mrbarth"?
Sorry for not understanding this. I am sure it is very easy and I just have one thing in the chain wrong. I am still a newbie on this even though I have been at the keyboards for over 10 years.

First, you need to try logging into his admin account and trying to print. If that works then most likely there's something he must configure for the account you normally log into on his computer to allow a remote user to print.
Second, consult the printer's manual to ascertain what if anything may require configuration to allow wireless printing. It's also likely that if you cannot print wirelessly that it's a problem with the printer driver that was selected when you added the shared printer. If there's a GutenPrint driver for you printer model try using it instead of the manufacturer's proprietary driver. If you don't have these drivers installed you can install them from your OS X Installer Disc's Optional Installs installer or you can download them at VersionTracker or MacUpdate.
Usually troubleshooting this type of issue requires starting from the basics. First be sure you can print when the printer is connected directly to your computer. Then check to be sure you can print with the printer shared from the other computer without any sort of imposed protections, firewalls, etc. Since this is a USB printer be sure you enable Printer Sharing on the computer to which the printer is connected. File Sharing is not a requirement for printing, but Printer Sharing is. Once you determine things are working with the most basic setup, you can start adding in each piece to the final setup checking along the way until either everything works or you find where it stops working. You can then start troubleshooting that issue.

#*$!%! Can't figure out how REALLY to set the printing defaults so they STICK for everything

PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348
On our 6-month old HP OfficeJet Pro 8500 Wireless A909g, we can't seem to figure out how to set the DEFAULT printing parameters so they really apply to all docs (unless we designate otherwise for a particular doc, of course). When we set them, sometimes they work for the next doc, and sometimes they revert back to an earlier setting.
There seem to be three ways to set parameters for the printer: Properties, Printing Preferences or Printing Defaults on the Advanced tab. (We really thought Printing Defaults on the Advanced tab would do it, since it's so hard to find, but ... NOT.)
My partner thinks it's an HP conspiracy to sell more ink because the reversion is to General with Color (the most ink-intensive, as far as I can figure out). We are trying to fix the machine to start always with Fast-Economical/Black Ink Only. Sometimes it's there and sometimes we have to re-jigger first. We still have to check every time.
Also, I want to fix every job to "Print Back to Front" because the printer shoots out the pages face up. Again, sometimes it's there, and sometimes we have to re-set before the job.
Also, whether we get the default we had set or we re-jigger first, the settings don't stick for every worksheet in an Excel workbook. Or sometimes not even every page.
So, who out there has the 100% foolproof guide to NAILING DOWN THOSE SETTINGS FOR EVERYTHING?
PLEASE DON'T REPLY HERE. PLEASE REPLY TO MY IDENTICAL POST AT
http://h30434.www3.hp.com/psg/board/message?board.id=Software&thread.id=5348

Locking this accidental double post and directing people to the linked original thread.
Clicking the "Kudos star" to the left is a great way to say thanks!
When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future!
Rules of Participation

How can I set the printer to continuously print from a roll of paper?

I need to print something continuously from one long piece of paper. I have googled this but all I find are answers on how to do this with an epsom printer! Just got my first HP printer today (J110) and pleased with it so far, but I'm having trouble finding out how to set it to continuously print.
Many thanks for any advice.

Hi,
I can not find your printer in this list
http://support.apple.com/kb/ht4356
How old id it ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I set up printer for3-5/8 x 6-1/2 envelopes

Similar Messages

Maybe you are looking for