How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

I am trying to be able to print on my Laser Jet Pro 200 color MFP 276nw printer from my Galaxy Note 10.1 and am instructed to set up HP web services. I need some help to know how to do this.

Hi,
Please try a print app such as HP ePint on your Galaxy:
http://www.hp.com/united-states/campaigns/mobility/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Problem setting up the UCP Web Service

I am new to CISCO and my first project is to set up the UCP Web Service. I don't have access to the web interface on ACS but I was told that acs config-web-interface ucp enable was run.
I have in the UCP file on tomcat
C:\Tomcat 7.0\webapps\ROOT\UCP
within the UCP file I have :
META-INF
pythonImport
pythonUCP
WEB-INF
index.jsp
wsdl.xml
With that set up I get to the index.jsp page. When I put the information in I get the following error message:
HTTP Status 404 - /UCP/UcpServlet
type Status report
message /UCP/UcpServlet
description The requested resource (/UCP/UcpServlet) is not available
I am sure I have done some sad and strange things. Can someone point me in the right direction? A simple stupid one at that...
Thank you so much

Hi,
Is there solution for this issue? I also have encounter similar problem:
An error occurred at line: [14] in the generated java file: [C:\Program Files\Apache Software Foundation\Tomcat 7.0\work\Catalina\localhost\_\org\apache\jsp\indexacs_jsp.java]
Only a type can be imported. com.cisco.nm.acs.mgmt.common.version.VersionFileReader resolves to a package
An error occurred at line: 23 in the jsp file: /indexacs.jsp
VersionFileReader cannot be resolved
It's seems there is a missed library (VersionFileReader) for JSP, does anyone can guide me to find it?
Thanks,
Rp

How to Print Envelopes - HP LaserJet Pro 200 color MFP

I can't work out how to print envelopes on my HP LaserJet Pro 200 color MFP.
I put the envelope upright (flap down) in the adjustable tray at the very top of the machine (as I have done in almost every printer I've used) and it prints the address on a sheet of paper!

Hi goodgrandma ,
I see by your post that you would also like to know how to print envelopes.
I will be happy to help you.
Both the Laserjet m251 and M276 have a main tray only.
Above the tray is the jam access door to remove paper jams.
To print on the envelopes, you would need to remove all the paper from the main tray and load the envelopes in the main (bottom) tray, to print to envelopes with these two units.
If you are using Word Application, click on Tools, select Letters and Mailing/Envelopes and labels, the envelope box will open, in the envelope tab enter your address, click on Options, click the Printing Options tab, you will need to change the Feed from to Auto, it is likely set to Manual.
What is the full name and product
number of your printer? How Do I Find My Model Number or Product Number?
Hope this helps.
Thank you for posting on the HP Forums.
Have a great day!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw in windows 7 64 bit

HI
am unable to install the scanner on the HP LaserJet Pro 200 color MFP M276nw Drivers in windows 7 64 bit , after runing the setup ,the printer will finshing the installation process and and it will show that the HP Scan and HP fax failed.

Hi @Chembo ,
I see you're experiencing issues installing the printer software. I will do my best to assist you with this issue.
I would disable all the start up programs and temporarily turn off the Antivirus Software and any Real Time Scanning in the Antivirus Software also, to see if that is causing the issue. How to use MSCONFIG . Click on the Startup tab and click Disable all, Then click the Services tab and check Hide All Microsoft Services.
Restart the computer.
Disconnect the USB cable from the printer.
Run the uninstall from the CD.
Go start, computer, right click on the CD for the printer, left click open in a new window, double click on uninstall.
Make sure that the print spooler service is running.
Right-click Print Spooler, and then click Properties.
If the Startup type is set to Manual or Disabled, click the drop-down list, click Automatic, and then click Apply.
Under Service status, click Stop and then Start, and then click OK.
Run the installation again and don't connect the cable until prompted.
Test the printer.
Then you will have to go back and enable the Startup programs, Microsoft Services and turn the Antivirus Software back on again.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Identifying the scan file for the Laserjet Pro 200 color MFP M276nw on a MacBookPro

In order to scan to a file on my Laserjet Pro 200 Color MFP M276nw, I need to register a file on my MacBookPro that the scan file can be sent. The Mac is using Mac OS 10.10 which is claimed to be supported by HP. But, I am unable to provide the registration information so that the scan file can be sent to the Mac. Can someone help me with this problem?

Hi @NeilPayze ,
I see that you are having issues setting up the scan file. I would like to help you out today.
If you are trying to setup a scan to a network folder, please follow these steps:
Create a folder on the desktop.
Hold down the control button and click on the folder you just created and select Get Info.
Check Share folder.
Under Sharing & Permissions select Read & Write.
Close that window.
Go to the Apple, System Preferences, Sharing.
Check File Sharing, select the folder created, then select Read & Write.
Click on options.
Check Share files and folders using SMB.
Check Share files and folders using AFP.
Below check Account name.
Then click on Done.
On the same windows, with File Sharing highlighted, to the right of that under File Sharing: ON, write down the
IP address.
Then close that window.
Open the Embedded Web Server for the printer.
Click on the Scan tab.
Click on Network Folder Setup.
Delete any old entries.
Then click on New.
Display Name: Type in any display name.
Network Path: \\computer's IP\folder name
Example: \\192.168.22.104\scan
Username:Computers User name.
Password: Computers Password.
Then click on Save and Test at the bottom right corner.
Please let me know the results.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw. The fax forwarding feature no longer will forward a fax.

I am using the HP LaserJet Pro 200 color MFP M276nw. Is it possible to forward the fax as a email instead of printing it out? The current fax forwarding feature only supports forwarding to another fax number but not email. If fax forwarding to email is not support, is there any other solution?
Albert

Hi @Albert1024 , I understand that you aren't able to forward the faxes. I can help you today.
You can only forward that faxes from the printer to the fax number.
Check to make sure the Fax Forwarding didn't get turned off and it is still showing the correct fax number.
1. From the Home screen, touch the Fax button.
2. Touch the Fax Menu button.
3. Touch the Receive Options button.
4. Touch the Forward Fax button, and touch the On button.
5. Use the keypad to enter the fax-forwarding number, and then touch the OK button.
Turn off the Private Receive.
1. From the Home screen, touch the Setup button.
2. Touch the Fax Setup menu.
3. Touch the Advanced Setup menu.
4. Scroll to and touch the Private Receive button, and then touch the Off button.
Clear out the saved faxes, to make sure this isn't causing any issues.
Go to Setup on the printer, Services, Fax Service and select Clear Saved Faxes.
Update the printer's firmware. HP LaserJet Pro 200 color MFP M276nw Drivers.
If you are still having issues, we can try a full reset on the printer.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HP LaserJet Pro 200 color MFP M276nw - No Embedded Web Server (Port 80 not even showing open)

The embedded web server on our LaserJet Pro 200 color MFP M276nw is not responding and a port scan of the printer shows that port 80 is not open. We have power cycled the printer and that did not resolve the issue.
Is there a way to check the status of the embedded web server through the control panel on the printer?
Are there any other steps we can take to restore the embedded web server?
Thanks in advance.

Hello csandrews68,
I see you have an LaserJet Pro 200 color MFP M276nw that the Embedded Web Server will not load, port 80 shows as closed.
I suggest restoring the network defaults on the printer:
From the home screen on the printer push Setup (wrench and gear icon)
Go to and select Network Setup
Push Restore Defaults
With defaults restored, connect the printer back to the network and try to load the EWS.
Let me know if that helped.
Thanks,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro 200 Color MFP M276n issue with the software

Dear Members,
When i'm trying to install the drivers for the printer HP LaserJet Pro 200 Color MFP M276n, on Windows Xp the issue is specific on windows xp only i tried on two machines its the same and its fine when i try to intall on windows 7.
Error Message:
A problem occured while preparing to install software to your system please restart your computer, and run this installer agian.
Please assist me for the above issue and thanks.
Regards
mbsiddiqui

Hi mbsiddiqui,
When a printer is connected by USB, the computer recognizes it and it will show up in the device manager, if it didn't fully install it will still be listed in the device manager and will not find it again when the printer is reconnected. We have to remove the old entry first.
Leave the printer connected by the USB cable.
Check the device manager to see if the printer is listed.
Go to start, right click my computer, left click properties, click on the hardware tab, then device manager.
Look for the printer entry, it might be listed as other devices, unknown device, delete the entry by right clicking it and select uninstall, it might show up under universal serial bus controllers as USB printing support, if USB composite device is listed then also delete it, delete the entry by right clicking it and select uninstall.
Since the software is already installed for the Ethernet connection, from device manager, click on Action and select scan for new hardware.
If it doesn't find the printer then it might have a ghost key in the registry causing the printer not to be detected again.
Let me know the results.
How is the printer listed?
Were you able to find new hardware?
What is the printer entry showing now in the device manager?
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet Pro 200 color MFP M276nw/ a code 79 service error turn off then on, on screen the product

I have an HP LaserJet Pro 200 color MFP M276nw. I keep getting a code 79 service error turn off then on, on screen the product

I have same problem - this doesn't help. Did you did something that worked?

Cannot set up web services on HP Laser Jet CP1025nw

I keep getting a communications error message/check internet connection. I can print over my network just fine. I have an IP assigned to the printer that is outside the DHCP range. I have read lots of posts but nothing has fixed the issue. Please help. I have also tried using Google's DNS addresses. I have tried uninstalling and reinstalling the software.
Network Summary
TCP/IP(v4)
Status: Ready
IP Address: 192.168.1.201
IP Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: Manual
DHCP/BOOTP Server: 0.0.0.0
WINS Server: 192.168.1.1
Preferred DNS Address: 75.75.76.76
Alternate DNS Address: 75.75.75.75
TCP/IP(v6)
Status: Ready
Link-Local: FE80:0:0:0:7AE71FF:FEA6:9E90
Stateless (from Router): Not Configured
Stateful (from DHCPv6): Not Configured
Network Identification
Host Name: NPIA69E90
Domain Name:
Bonjour Service Name: HP LaserJet CP1025nw
Bonjour Domain Name: NPIA69E90.local.
Network Hardware Configuration
Network in Use: Wired
Wired Hardware Address: 78:E71:A6:9E:90
Wireless Hardware Address: 90:00:4E:05:51:69
Firmware Date: 20130212
IO Timeout: 120 Seconds
802.11b/g/n Wireless
Status: Disabled
Communication Mode: Infrastructure
Network Name (SSID):
Authentication: None (Open)
Wireless Direct Setup
Status: Enabled
Wireless Direct Printing Name (SSID): HP-Print-69-LaserJet CP1025
Wireless Direct Printing Channel: 6
IP Address: 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: v1/v2
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 6139
Unicast Packets Received: 4241
Bad Packets Received: 2
Framing Errors Received: 0
Total Packets Transmitted: 6971
Unsendable Packets: 0
Transmit Collisions: 0
Transmit Late Collisions: 0
Enabled Features
IPv4: Enabled
IPv6: Enabled
DHCPv6: Disabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled

DPE65,
If I understand correctly, you are having issues getting web services enabled.
Do you have a static IP address assigned to the printer?
I would recommend assigning one that is in the DHCP range and then also using the Google DNS servers.
8.8.8.8 for the primary and 8.8.4.4 for the secondary or alternate.
Try that and report back to me if it helps.
Best of luck,
Kyle
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

HOW CAN I SET MY FAX SENDING REPORT AS PRINT HP LASER JET COLOURE 2840

sory i want to set my hp laser jet coloure 2840 as fex sending report as a print

Hi
I found a link which may help you
http://h10032.www1.hp.com/ctg/Manual/c00292207.pdf
Go through the Fax part of it.
Hope this helps.
***** Click the KUDOS Thumbs UP (Like) on the left to say 'Thanks'*****
****Make it easier for other people to find solutions, by marking my answer “Accept as Solution”&"Kudos"if it solves your problem.****
-VJ
Although I am an HP Employee, I am speaking for myself and not for HP.

How do i set up the behringer xenyx 1002 audio mixer to mac pro

hello i just received my behringer1002 mixer and want to know how do i connect it to my mac pro. thanks

Either
http://www.behringer.com/EN/Products/UCA222.aspx
or
http://www.behringer.com/EN/Products/FCA202.aspx

How to turn off Manual Feed envelope prompt on printer scrn LaserJet Pro 200 Color MFP M276?

Somehow, in trying to figure out how to get an envelope to print from the feeder tray (which I found out isn't possible), I turned on something that produces a printer screen prompt that says something like 'Manual Feed" then says the size of envelope and waits for response. This is every time I print an envelope & it's really a pain and I'm not finding where/how to turn this off. Can anyone help? Thanks in advance.

Hello miebs, and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having envelope issues. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information we can provide you with accurate information.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, What programs are you printing from? Does it occur from multiple programs?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to call BPEL process from Java Web Service?

Any example/sample/tutorial on this?
TIA.

I've done something similar a few times, specifically using a standalone Java application to invoke a BPEL process (so that it can be called from a cron job, for instance).
The thing to remember is that a BPEL process presents itself to the outside world as a Web service. If your Java Web service can communicate with other Web services (by sending a message of the appropriate format to the URL of the other Web service), then exactly the same technique can be used to call the BPEL process. You know what the input message has to look like, and you know where the process is located on your network, so set up the Java Web service to send the message to that address.

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
Basically the TC is about the hardest device to setup because it is lacking important networking functions.
Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

How do I set up the HP web services on my laser Jet Pro 200 color MFP 276nw?

Similar Messages

Maybe you are looking for