How do i set up the outgoing server for charter e-mail?

I can receive but not send e-mail with my charter.com account. What are the smtp settings?

Googled for Charter SMTP settings, took me here-
http://www.myaccount.charter.com/customers/support.aspx?supportarticleid=1417

Similar Messages

TS3899 I can't SEND email from Telus account in Alberta, Canada? Does anyone know how to set up the Outgoing server? Help! And thanks!

Can't SEND email from Telus account in Alberta, Canada, unless I go to web mail. Does anyone know how to set up the Outgoing server? Incoming is fine. Outgoing used to work. We changed it when we went to another location, and can't get it back. Telus support can't fix it. Neither smtp.telus.net NOR mail.telus.net works for Outgoing server to send mail. Please help! Thanks.

iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
 Cheers, Tom

How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
So I'm not really sure what your question is.

HT4864 can I use the icloud smtp server as the outgoing server for all my other imap accounts?

I have several imap accounts. I want to send all my messages using the icloud server. I put the icloud server as the smtp server for each account but mail is not able to send the messages. The configuration is correct for the smtp iclous server, I checked.
Is there anything I'm missing?
Fausto

The only thing you're missing is that you can't do that. You have to use the correct smtp server for the mail accounts. Email providers generally don't like sending some other company's mail. If you want to send from the icloud servers, use your icloud account when composing.

How do I set up the SMTP server on Lion

Hello
I want to use my OS X Lion server to send mail only (I use Rumpus FTP - which needs a SMTP server so that it can send notification emails)
Is this possible to do with OS X Lion Server? If so - how?
Server is set up and running nicely, with DNS etc all running.
Thanks,
Andrew

Hello Camelot
Thank you for your reply.
Is there a way of testing for sure that SMTP is set up and running, using say telnet??
I've turned on mail and entered my server domain name, port 25 into the email settings of my Rumpus client (so that it can send notification emails - it also happens to be running on the same server, so I tried localhost and 127.0.0.1 as well but no sucess.
I have not entered authentication credentials, but turned off authentication using Server Admin.
Thanks again
Andrew

Help, how do i find out the host server for a website i have inherited

hi i inherited responcibilty for a website, simply because
there was noone else avalable. i have dreamweaver cs3, but only
about 2 weeks worth of knowledge and experience. I was given info
ie. ftp address and username etc, so have been able to download the
website to my home computer, and have been making updates, now
however i need to find out more about setting up a test server so i
can use dynamic pages, specifically for collecting form
information, collecting donations and selling art work. i will need
some information from the host server to start with, but am unsure
as how to identify and contact them, can anyone help me please. I
am sure it is rudimentary, but the information is essential.
also as a side note, could anyone tell me how to find out
where the websites domain name is regestered ( other than
contacting the original designer, as that seem quite impossible)
because i get the feeling that if all else fails i may be able to
move the website to another host ( not that i now how yet, or even
how to select or find a host) please let me know if any of my
assumptions are wrong.
Thanking you in advance
J
volunteer.

Hi,
To find out about the host, go to register.com and look up
the domain name.
When it gives you results, it'll say that the name is already
taken, but it
will let you do a 'whois' on it.
Those results can give you some info such as the server DNS.
That may let
you figure out the host.
Sometimes the technical contact in the whois, is the host as
well.
"nsfwebnewbie" <[email protected]> wrote in
message
news:fmo8cf$3l5$[email protected]..
> hi i inherited responcibilty for a website, simply
because there was noone
> else
> avalable. i have dreamweaver cs3, but only about 2 weeks
worth of
> knowledge and
> experience. I was given info ie. ftp address and
username etc, so have
> been
> able to download the website to my home computer, and
have been making
> updates,
> now however i need to find out more about setting up a
test server so i
> can use
> dynamic pages, specifically for collecting form
information, collecting
> donations and selling art work. i will need some
information from the host
> server to start with, but am unsure as how to identify
and contact them,
> can
> anyone help me please. I am sure it is rudimentary, but
the information is
> essential.
> also as a side note, could anyone tell me how to find
out where the
> websites
> domain name is regestered ( other than contacting the
original designer,
> as
> that seem quite impossible) because i get the feeling
that if all else
> fails i
> may be able to move the website to another host ( not
that i now how yet,
> or
> even how to select or find a host) please let me know if
any of my
> assumptions
> are wrong.
>
>
> Thanking you in advance
>
> J
> volunteer.
>
>

TS3899 What is the outgoing server for my ymail account?

I am trying to set up my email (ymail account) on my iPhone 4s but I am unsure what to put as the outgoing mail server...

You would need to contact the email provider for that information.

How do i set up the wireless option for printing rather than using an usb

how do I set up wireless printing function on my hp photosmart C4780

This should help: http://www.hp.com/global/us/en/wireless/reconfiguring-system-help2.html
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

How do you set/find the directory path for /i/

Searching the forum, I found one note that indicated this was set in MARVEL.CONF (since I'm running 2.0, presumably DADS.CONF). However, looking at the DADS file for my install, I don't see anything resembling a directory mapping. What would the syntax be for this?

In a default installation, you are supposed to add the mapping to httpd.conf
But it could be in any file Apache includes.
Seach for a line like
Alias /i/ "/opt/oracle/product/10.1.0/Apache/Apache/images/"

How do I set up a proxy server for webmail services to assist in migrating from NMS 4.15p6 on NT to iMS 5.1 on HP-UX.

I want to have minimal if no downtime at all when moving the message store. iPlanet support hinted at an "unsupported" proxy server solution, and would give no further information. I am running the MMP with 5.1 and that supports IMAP and POP migration, but I need support for webmail services as well to complete the migration from NT to UNIX with minimal distruption of thousands of users. I am using the MoveUser utility to move the message store in hopes that will clear up some store corruption we have been seeing.

To get this in a 'supported' fashion you might want to wait until the iMS 5.2 release. iPlanet has said this release would include a webmail proxy/mmp server to do exactly what you desire.
A proxy server would not be a solution to your problem as it would have to have access and knowledge to the users mailhost attribute to determine to which host to route the webmail connection. The webmail proxy/mmp will have this functionality.
You might want to contact your iPlanet rep about this product and maybe you could get a copy of it as part of a beta program. I know iPlanet is always looking for oppourtunities for feedback like this.
-Chris

How can I set a different proxy server for different networks in user.js

I need to automatically set the proxy configuration depending on the network I am connected to. Can this be done through the user.js?
Simple logic would be:-
if IP=10.20.30.0 use proxy A
if IP=172.18.19.0 use proxy B
else DIRECT
Thanks
Leon

No, you can't do it that way.<br />
You could create a set of files user.js and use a bat or cmd file to copy the file with the proxy setting that you want to use to user.js and then start Firefox.
<pre><nowiki>cd <path to profile folder>
delete user.js
copy user-proxy1.js user.js
start "" "C:\Program Files\Mozilla Firefox\firefox.exe"
</nowiki></pre>
You can also use an extension.
*FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
*QuickProxy: https://addons.mozilla.org/firefox/addon/1557
*SwitchProxy: https://addons.mozilla.org/firefox/addon/125

How do I set up the .exe file for silent (unattended) install?

I'm looking to do multi installs across different platforms with a WPI

Are you printing this yourself, on a network copier for example? If it's going to be printed on an offset press, it will have to be imposed by prepress techs, and it's their job to make sure that the pages are aligned correctly. There will be some part of a cross-spread image that will be lost in the spine, and their imposition method will take into account whether pages need to be moved outward from the spine by small amounts (called creep) to compensate for the wrap-around that is a part of bindery, but perfect binding isn't as bad as saddle stitch as far as that goes. Talk to your printer, but you will likely just need to compose the book in normal facing-page readers spreads and provide a multi-page PDF (not exported as spreads). They will impose the pages into printers spreads, and thank you for not doing that yourself. There will be aspects of their production that you won't or can't know about, and if you impose it, it will just make it harder for them if they have to undo what you have done incorrectly.

How do I set up the rescue email for forgotten security question answers?

I have not been able to make purchases in the Apple Store because it asks for answers to security questions. I have forgotten those answers, therefore unable to access my account. It says to make a rescue email, but does not lead me to the right areas. What should I do?

Click here and request assistance.
(78111)

I have an iMac, and have a Verizon DSL account. Recently, my Mac Mail keeps requesting the passwords on my account every few minutes, and will not allow me to send messages using Mac Mail. I cannot edit the outgoing server; how can I send emails?

I have an iMac, and have a Verizon DSL account (3 email addresses). Recently, my Mac Mail keeps requesting the passwords on my accounts every few minutes, and will not allow me to send messages using Mac Mail (the message says that the outgoing server was rejected. I cannot edit the outgoing server, and the keychain will not save my passwords (the ports are valid). How can I change the outgoing server to send emails, and how can I avoid having Mail request my passwords every 2 minutes? Verizon, as usual, will not provide support to iMacs.

Is there an email saved in your drafts or outbox folder? I suspect that Mail is continually trying to send it, and each time Google is rejecting the email message.
You can open the message and then delete it from your Outbox folder. Then try removing all @gmail email addresses from it and seeing whether you can send to the other folks. I suspect that will work.
With email, if an SMTP server *can* verify email addresses, sometimes it will and it will refuse to send messages. If a message has to be relayed across servers, no verification is done, and you'll get a bounce if an email address is bad.

How do I set up the email on the my new MacBook Pro to receive "me" email

how do I set up the email on the my new MacBook Pro to receive "me" email on my Mac. I would like to use Entourage if possible but anything would be good.
I am not sure this is the right place but I could not figure out where else to post an email ( [email protected] ) question.
Thanks!
Martin

Hi Martin,
MobileMe Mail Help: Setting up Mac OS X Mail to receive your MobileMe email
The steps you follow to set up Mac OS X Mail to receive your MobileMe email depend on which version of Mac OS you’re using.
Important: For the instruction below, use the following: MobileMe Mail’s incoming mail server is “mail.me.com” and the outgoing mail server it “smtp.me.com.”
To set up Mac OS X Mail to receive MobileMe mail:
If you’re using Mac OS X version 10.4.11 or later
Open System Preferences (under the Apple icon at the upper-left of your computer screen).
Click MobileMe (if you have Mac OS X version 10.5.3 or later), or .Mac (if using version 10.4.11 to 10.5.2), and enter your MobileMe member name and password.
Open Mac OS X Mail, choose Mail > Preferences, and then click Accounts.
Click the Add button at the lower-left of the Accounts pane. Choose MobileMe from the Account Type pop-up menu, and then enter your account information.
The member name and password you use for SMTP authentication must match the member name and password in the User Name and Password fields.
To switch to POP, delete the existing IMAP account before you create the new POP account. Choose POP Account from the Account Type pop-up menu instead of MobileMe Account.

How do i set up the outgoing server for charter e-mail?

Similar Messages

Maybe you are looking for