How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

We bought a DYMO Label Writer 4XL. We want to print thermal labels from our Mac and PC, wireless. The good thing is that I already have the printer set in the network and added on each of our computers (Mac and Windows 8). For printing regular labels you can use the Dymo software; for printing postage labels from ebay or paypal has been impossible.
From ebay I even tried one label at the time but still did not work. I sent the the print command from the mac-print-window, changing each of the settings (such as paper size) but did not work. Each time (no matter if you want to print one label only) it advances more than one lable.
http://community.ebay.com/t5/Miscellaneous/Using-a-thermal-printer-for-eBay-labe ls-using-a-Mac/qaq-p/3135261 (post by stormshock)
Through Paypal is a different story. It should be easy cause it seems the Zebra Driver in Paypal works with this DYMO. The issue is how to get the system to send the print command to the DYMO printer through the Zebra LP2488? please help! I know some people have succeded making all these work. What am I missing?
http://www.amazon.com/review/R3E73A6ZX39ZZQ/ref=cm_cr_pr_cmt?ie=UTF8&ASIN=B002M1 LGJ4&linkCode=&nodeID=&tag=#wasThisHelpful

To whomever is reading this post I just wanted to let you know I returned the Dymo 4XL. Their customer service is horrible. Technical support does not exist at all. The issue was extremely frustrating and time consuming. I do not recommend this thermal printer at all. Good luck finding one... if you do, please share.

Similar Messages

HT1420 How do I set up parental control on book downloads? My daughter and I use the same Apple ID info.

How do I set up parental controls on my apple account, I want to censor the books that she's dowloading. We use the same account Thanks!

Turning off in-app purchases and the App Store itself would be the best bet for you. You can always unlock these features as needed and lock them again.
Apart from restricting purchases, there are a number of other restrictions you can setup. You can even setup a safe browser with remote parental controls from the App Store, like the one from Mobicip. You may find this tutorial to be helpful: How to setup Parental Controls on the iPad.
Hope this helps.
Disclaimer: This response is posted by a Mobicip representative who may stand to gain indirectly from it.

When I click the launchpad, (I have icons on 2 pages) how do I return to the 1st set when the system seems to automatically shift to 2nd page?

When I click the launchpad, (I have icons on 2 pages) how do I return to the 1st set after the system seems to automatically shift to 2nd page?.
I'm not aware of anything I might have done, but it's annoying to want to use an icon on the 1st page, only to see all the icons on page 1 shift rapidly to the left
and I can't find a way to shift back to page 1.
Is there a way of getting all my Launchpad icons onto 1 page by adjusting their size?

Thanks for that. I think the 2 little white dots were hidden by the white frame round the desktop picture on my screen
As you can see from the pic, there is a broad white frame around the image.

How do I set up the email on the my new MacBook Pro to receive "me" email

how do I set up the email on the my new MacBook Pro to receive "me" email on my Mac. I would like to use Entourage if possible but anything would be good.
I am not sure this is the right place but I could not figure out where else to post an email ( [email protected] ) question.
Thanks!
Martin

Hi Martin,
MobileMe Mail Help: Setting up Mac OS X Mail to receive your MobileMe email
The steps you follow to set up Mac OS X Mail to receive your MobileMe email depend on which version of Mac OS you’re using.
Important: For the instruction below, use the following: MobileMe Mail’s incoming mail server is “mail.me.com” and the outgoing mail server it “smtp.me.com.”
To set up Mac OS X Mail to receive MobileMe mail:
If you’re using Mac OS X version 10.4.11 or later
Open System Preferences (under the Apple icon at the upper-left of your computer screen).
Click MobileMe (if you have Mac OS X version 10.5.3 or later), or .Mac (if using version 10.4.11 to 10.5.2), and enter your MobileMe member name and password.
Open Mac OS X Mail, choose Mail > Preferences, and then click Accounts.
Click the Add button at the lower-left of the Accounts pane. Choose MobileMe from the Account Type pop-up menu, and then enter your account information.
The member name and password you use for SMTP authentication must match the member name and password in the User Name and Password fields.
To switch to POP, delete the existing IMAP account before you create the new POP account. Choose POP Account from the Account Type pop-up menu instead of MobileMe Account.

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer?

I have a new Mac Pro. I want to use my old Mac Pro as a storage drive for photos and old documents, linked to my new Mac Pro. How do I set up the old computer? Both computers have OS X10.9.3. Currently they are connected by a Firewire 800 cable.

You certainly could keep the old Mac Pro in Firewire mode (hold down the T key on its keyboard as you boot) to show its drives on the new MP. This is basically as fast as putting the drives into a Firewire enclosure.
Or you could boot it normally and share its files over the network using the Sharing panel of System Preferences. If you turn on both File and Screen Sharing, you don't even need to have a monitor attached - you can do all administration using screen sharing. However, this method requires that you open all files over the network, which will be slower than the direct-connect method above, and may also not work with all applications.
Matt

How do I set up my system so that I can program in C

How do I set up my system so that I can program in C,C ? Without using Xcode. Just want to write simple "hello, world" stuff. So far, my Mac seem oblivious to my efforts even though it seems that all the files are there.
At first, it could not find gcc. Then I added /Developer/usr/bin to the path and it seemed to find gcc.
Then it didn't find stdio.h. I added /Developer/SDKs/MacOSX10.6.sdk/usr/include/ to the path but it still doesn't find stdio.h
There must be a standard C setup that my Mac is not conformaing to. How can I get set up like a regular Unix system and do C programming like I used to?
Thanks,
JfromG

None of the responses/experiences seems to apply to me. Let me ask the question this way, because it's partly for my education and also I'd like to program in C. Let's say I have a Unix box and I want to program in C. What files need to be where in what directories? And why wouldn't that work on a Mac? My impression is that the Mac OS X 10.8 contains all I need, but it doesn't work. At least I don't think it does. I may be out in left field here. But surely, being a Unix box, I can get this machine to compile C code in something like the usual fashion. I don't need editors or development environments beyond the basic stuff - unless your telling me maybe I do! Anyway, just wondering what files need to go where in order to compile C programs. Thanks for you forbearance. I appreciate it.
JohnfromG

APO - Basic settings for setting up the system landscape

Hi,
I have a, hopefully small, issue regarding setting up the system landscape for our APO - R/3 environment.
In our test system in R/3 I need to specify the APO release, which is not a problem. The issue I have in R/3 is when I try to save the new setting. The system asks for a workbench request even if the test system has been "opened" by the Basis resource.
I would like to avoid creating a workbench request as we are using an external tool ( HP PPM ) for transport management and I believe I will get into trouble since this workbench request should not be transported further into our production environment. As I have understood from our APO experts the settings must be maintained per R/3 system (development - test/quality - production) as it is pointing to corresponding systems in the APO landscape.
The question is, does anyone know how we can maintain these settings without any workbench request being created?
This is perhaps not a APO question, but I'm not sure in what other forum I should post it.
Thanks for any feedback
Br,
Lars

Lars,
I have difficulty envisioning any situation when you would wish to make any transportable change (workbench or otherwise) in a test system. The normal path would be to transport the change from the dev system into the test system. I am unfamiliar with the third party software (HP PPM) about which you speak. However, the standard controls currently used in your transport process (third party or otherwise) should limit which transports do and which transports do not get moved into your prod system.
I can think of several ways to approach this problem. I think you should consult with your supervisor before attempting such changes, to ensure that you are complying with all policies and procedures that exist for your company. In my company, this type of exception would require creation of special change management docs, and appropriate signoffs by management.
You are right this is not an APO question, it is a Basis question. For advice on the technical aspect of your question, try one of the Basis forums. Pick the one that is for the DBM you are using.
http://forums.sdn.sap.com/index.jspa?categoryID=1#34
Best Regards,
DB49

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?!

When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!

hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

After downloading Mozilla Firefox 4.0 Beta to my desktop I restarted the computer, but I do not receive any prompts to create an account with a Secret Password. How do I set up the account if the prompt never show up?

Several months ago I installed the Firefox Home app on my iPhone to sync the bookmarks that I had on my Windows XP home computer. It has worked just fine until a few days ago. Just recently I was notified that the app would no longer work because of changes that have been made. I have tried to follow the instructions that were emailed to me regarding how to setup the new Firefox Sync add-on, but I am having a problem. After downloading Mozilla Firefox 4.0 Beta to my desktop and restarting my computer, I do not receive any prompts to create an account with a password and a secret phrase, as the instructions specify. How do I set up the account if the prompt never shows up?

Click on the Firefox button then select Options to open the Options dialog. Now go to the Sync panel for the option to setup a new account.

How do I set up the "Objects and Attachments"

Hi .... I'm new at WorkFlow (and SAP for that matter) and have inherited a WF that is already built. In several of the steps I can see "Objects and Attachments" on the work item screen where a User can click to be directed to a transaction. For example, on one screen the User can click on "Incoming Invoice: 5105601690" to be directed to the Invoice Display Screen that is populated with information for that particular invoice (5105601690).
I am looking at the WF using TCode SWDD and cannot figure our how the original developer set this up. So my question is ..... for a particular WF step, how do you set up the "Objects and Attachments: area so that the User will be directed to a particular transaction when he/she clicks on it.
Thanks in advance, and sorry for such a "juvenile" question.
Dan A

Thanks for your reply Rajkumar,
I am looking at the screen you have directed me to. Business object is BUS2081 (actually it is ZMMWBS2081 which is a customized version BUS2081) Method is "Display" and Attribute is "InvoiceDocNumber". How do I know by looking at this that "Display" means Display Invoice? What if I wanted to display the PO instead?
Thanks for the "spoon feeding".
Dan A

How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Can I have two icloud emails?? How do I set up the second one??

I want to use @icloud.com for my personal and business emails; but I want them to be 2 separate accounts. I have one for personal. How do I set up the second one?
Thks.

Here are a couple of Apple doucments about email aliases that Csound1 mentioned.
iCloud: Create or change email aliases
iCloud: About email aliases
OT

How do we set up the # button on Verizon fios remote p265?

How do we set up the # or size button on Verizon fios remote p265?
THANK YOU
Solved!
Go to Solution.

Friendly wrote:
I thought there might be a enter button once you set the size you want. That is mainly what I am asking if you have to enter or set the choice we make.
So you are wondering how to make the size change "permanent" for a channel? If so, no, there is no way. If you change the channel the screen size reverts to normal on the new channel, and if you go back to the one where you had set the size it is back to normal there also.
Justin
FiOS TV: Extreme HD, Internet: 50/50, Digital Voice
VMS Enhanced Service: 1 server, 2 clients
Keller, TX 76248 (VHO 1)

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I have two children each with an ipod which has FaceTime - I have the iphone 4s with FaceTime. All of these devices are connected to itunes through the one account. How do I set up the FaceTime on the two ipods so as it doesn't ring both of them?

I started to do that then it said that this will become their apple I.D or similar and then I thought that will disconnect them from the same iTunes? I want them still on my iTunes as they are only young (8 and 10)? Or have I got this all wrong and even if I do set them up with a different e-mail will they still be on my itunes? For example if they want to purchase an App will it still go through my account even if they use their ipod?

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

How do I set up the system to print 4x6 labels via paypal and ebay using a DYMO 4XL Thermal Label Printer (through airport)?

Similar Messages

Maybe you are looking for