How do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

how do i set up the time capsule with only a wireless net work? it keeps asking me to plug in a cable and i do not have one.

Are you using a v6 uitlity.. because it is a toy.. ??
Get v5 utility and then you can hold down the option key and select the right mode.
If you have lion, just install it.. For ML follow this.
How to load 5.6 into ML.
1. Download 5.6 for Lion.
http://support.apple.com/kb/DL1482
Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
2. Download and install unpkg.
http://www.timdoug.com/unpkg/
Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

Similar Messages

  • How do I set up the Time Capsule without an internet connection

    How do I set up the Time Capsule as a wireless hard drive without an internet connection.   I am in a office situation in which I cannot access my work network.  I need to be able to share files on the Time Capsule over the wire connection.

    Are you using a v6 uitlity.. because it is a toy.. ??
    Get v5 utility and then you can hold down the option key and select the right mode.
    If you have lion, just install it.. For ML follow this.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.

  • How do I set up my time capsule with my PC and BT home hub

    Hi, I really need help.
    I have a new time machine I am having trouble setting up. I have a BT Home Hub that I have hard wired to the TC to the WAN port. I have Connected my PC to the Ethernet port. The PC will not find the TC.
    I also need to Wi-Fi attach other laptop PCs to it.
    PLEASE CAN SOMEONE HELP?
    Ade.

    You might have an IP collision ..
    unplug the wan connection to the home hub..
    Restart the Time Capsule with a single ethernet connection to a pc plugged into its LAN port.
    Make sure the pc is getting an ip address. Open airport utility and see if you can now access the TC.. !
    When you say PC do you mean windows machine?
    Windows can have some issues accessing the TC.. especially if you have the windows computer on win7 running homegroup.. which is a wretched piece of incestous connection between win7 exclusively.

  • How do i set up my time capsule with actiontec q1000/century link dsl

    how do i port forward, etc

    The Actiontec Q1000 is a modem/router, so it is the Actiontec that would be the device that would need to be setup for port forwarding....not the Time Capsule.
    Please contact your ISP or Actiontec for information on how to set up port forwarding on the Q1000.
    The Time Capsule would be in Bridge Mode, meaning that ports are already open, so it will simply pass the settings that it receives from the Actiontec through to connected devices.

  • How do i set up my time capsule with windows

    How do I set up my airport time capsule using Windows 7 home premium?

    If you have the newest AC model TC.. you might be in trouble. Apple specifically state you need v6 airport utility. They do not provide v6 with windows.. only Mac and iOS. If you happen to have iphone, ipad even itouch, you can download and install the airport utility and use that.. you just cannot do the setup from windows.

  • How to set up the time capsule

    How do I set up the time capsule for just back up

    How do I set up the time capsule for just back up

  • How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.

    The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
    If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network.

  • How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet?  I want to be able to share wirelessly the information on the time capsule. thanks!

    I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated  you are using Lion.
    1. Did you download and install the 5.6 utility..?
    I said to do it.. you never said yes.. I did that.
    Please do it. .. you will get no place before you do.
    2. Did you bridge the TC.. ?
    If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
    3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

  • I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?

    I have two time capsules, one for work and one for home, how do I set up the work time capsule to only back up my work files?  Also, how do I add co-workers to my work time capsule and wife to my home time capsule?  Thank you!

    You cannot have two different TC setups.. at least until Mountain Lion.. it did introduce some changes but I am not sure if you can setup two different configurations for TM.. you can use two different devices to back up to. I doubt this will help you.
    You might be better using a real backup software.. superduper, CCC, chronosync etc.
    The TC by default is available to any Mac in the network to do backups. TM will sort itself out and put each computer on a different backup. These are kept in separate sparsebundles.. so that is all fine.

  • When I start my MacBook Air, I get a problem report on the Time Capsule 802.11n. When I click Continue, it asks for a password. I don't know what the password is because I didn't set this up. How can I find out what the password is?

    When I start my MacBook Air, I get a problem report on the Time Capsule 802.11n. When I click Continue, it asks for a password. I don't know what the password is because I didn't set this up. How can I find out what the password is?

    Who set it up?

  • How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

    How I can set up the DynDns inside the Time capsule, or only with the Time capsule I have external access from a PC for ex.?

    MobileMe service is finished.. to get remote access to the Mac or TC you use iCloud account.. but that is for files.. not to access web cams.
    Without dyndns client in the TC, you can perhaps run dyndns on the computer or video recorder..many of these will have clients built into them.
    Even better get a static Public IP from your ISP.. that is the correct professional way to do it.
    Or you can use whatever broadband modem you have and remove the TC as the main router.. simply bridge it. Use your adsl router for connection. Almost all adsl have built in dyndns.
    Sorry your language is very hard to follow.. and I am sure you are finding my answers similarly difficult.
    Basically the TC is about the hardest device to setup because it is lacking important networking functions.
    Get a vpn router and use vpn connection is far superior to any other method. But you cannot do it with TC.

  • I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    I have an Ipad, I activated the time capsule with no issues. I added the airport Utility application without issue.  However, I do not know how to access the hard drive with either my Windows computer or the Ipad.  Does someone know how?

    On windows load the airport utility .. latest correct version as possible.. there is no windows 8 but win7 works after a fashion.
    Make sure the TC is using SMB compatible names.. short no spaces and pure alphanumeric.
    Type the name directly into windows explorer.
    \\TCname or \\TCIPaddress
    If no luck turn off all the firewalls.. internal windows plus security software plus whatever other gargyoles and other rubbish AV software you have running.
    Ensure windows is able to at least ping the TC by IP address and name..
    Use the utility in windows to set file sharing to guest account on with full read and write access.. and set workgroup to WORKGROUP.

  • How do I set up my Time Capsule as backup HD only.

    How do I set up my Time Capsule to act as back up external Hard Drive only?  When I connect to my current network it slows down transfers between my 3 HD Tivos set up on my network to a crawl!  I don't want it connected to my network!

    Bridge the TC.
    First of all download and use the real utility if you haven't already. http://support.apple.com/kb/DL1482
    Open utility.. go to manual setup..
    In the TC setup go to internet tab..
    Down the page find connection sharing.
    Select off bridge mode.
    Update the TC.
    The TC now is a client in the network and will act as a HDD.
    Wireless is up to you.. but it should not slow the connection. Certainly you can turn it off completely.

  • I changed my ISP, how I can Setting up my Time Capsule ?

    Recently, I changed my ISP, how I can Setting up my Time Capsule again?

    Hello. I jus tbought mine and will be setting up shortly. So I am only guessing here, based on how my airport extreme base station acted when I switched once. When you connect the ethernet to it, it should simply find the signal,a nd prompt you for the password information that you set up with the new ISP.
    If not, please report back how it goes..

  • How do i set up my time capsule wifi for many users

    hello ..
    i have problem.. as always
    my time capsule is connected to dsl modem (off(bridge mode)), in modem we can get only 10 ip adresses and no more. so when there are 10 pc connected to our wifi, no more can connect.... how can i set up my time capsule, so more people can join our wifi...? is it even possible?
    P.S.
    1) to our wifi is connected printer, so everybody can print...
    2) every pc uses time capsule as bacup place in time machine.
    tnx

    You often see this limit of 10 clients in wireless hotspots but I have yet to see it in an adsl modem.. most strange way to pay for a service that is really irrelevant how many clients you use.
    Have a go .. I recently setup a TC to help a guy run his Roku.. and this setup worked well.. I have no idea if it can work in your case.
    Lets say the IP you get is 192.168.2.1-10 .. doesn't matter what it really is. And the adsl modem is 192.168.2.254
    (Assuming they are private addresses.. if they are public IP you can just use the DHCP and NAT. )
    But go to the airport utility.. I think you need to run v5 at least to change DNS.. but you can do the same thing in v6 using static but no dns changes.
    Now you set the IP of the TC manually.. This address might need to be in the dhcp range of the modem to work. You can set the DNS to same IP as the router address.. ie home address of the modem. Or you can use another DNS.. whatever you like.
    Then set DHCP for clients that will join.. this can then expand the scope of addresses..
    It worked without a NAT error.. although I am not sure exactly how.. on paper it should not be able to work but did.. have a go.. otherwise there is perhaps another way.. but it is complicated.
    Give us an example from a computer plugged into the modem of what IP .. subnet mask .. Gateway and DNS you get. Then I can fine tune the values for it.

Maybe you are looking for