How do I setup a database-based website in Dreamweaver???

I have some experience with Dreamweaver, but I don't
know the first thing about databases. I need to create a website
where users can search for churches by name, location, etc. out of
a list of thousands. Can any one tell me where to start????

http://www.adobe.com/devnet/dreamweaver/articles/develop_web_application.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"cmnolen" <[email protected]> wrote in
message
news:feodk1$edf$[email protected]..
>
I have some experience with Dreamweaver, but I don't
know the
> first
> thing about databases. I need to create a website where
users can search
> for
> churches by name, location, etc. out of a list of
thousands. Can any one
> tell
> me where to start????
>

Similar Messages

How can I pubish SWF interactive magazine to flash based website? It's not working!

I hope someone can help me launch my first interactive magazine (SWF) to our website with ID 5. Okay, my hard copy mag came out great so then I started on the interactive edition. Everything was going swell with adding 3 short videos ( FLV ) and creating 3 slide shows. When I previewed it by exporting to SWF I could preview it in my browser fine. Page curls, fade in words (although the “hide until animated” options only works in two out of about 7 instances. (same settings) file:///C:/Users/lauralaptop/Documents/NEW%20PUBLICATION%20QUARTERLY%20JOURNAL%202011%20se pt%202/LIFE%20apr-may-june%202011%201st%20issue%20INTERACTIVE%20TRYOUT%20Aug%2031%204pm.ht ml
I then followed instructions from another Adobe exercise, exported it to Flash, went to Publish Settings, but of course when I pressed “publish” I didn’t get the same result as the teacher…I got an error message about text. I searched a forum with the same message I got and saw that making sure my text setting was set for Classic, solved someone else’s problem. So I did and was able to “publish”. But now, when I open either the SWF or HTML file, it’ just rapidly repeating the 12 pages in my file in a loop!
file:///C:/Users/lauralaptop/Desktop/LIFE%20apr-may-june%202011%201st%20issue%20INTERACTIV E%20TRYOUT%20Aug%2031%204pm.html
I have spent most of the summer self teaching myself InDesign CS5 (not easy!) and am excited to be able to put out an interactive SWF file that can be opened in a Flash player through our Flash based website. I feel like I’m just inches away for launch but now I’m getting frustrated. Isn’t this going to be possible?
Also, when I publish it in Flash, it creates a SWF file AND an HTML file. But on our website, I have only one option to make a link to a document OR an outside link to open a file. How does that work?
Many thanks for whoever can help me out here. This was supposed to be a spring issue. Had to change it to summer and now I guess it’s a fall launch!

Thank you for your quick reply, Rob. Well, i can't open the link you gave me to mysite (got a 404 error), could you resend it?
Originally, I exported the file to SWF (player) and just tried to link that file from our flash based website. It opens fine, page curls fine, slide shows fine, but when you click on the photos with videos, page 5 (father and baby) and two others, the image disappears and only a white comes up to fill that area.
http://scpres.org/#/media-sermons-online/our-publications. Could you go to this link on our website to see what I mean? Go to the NEWSBREAK TRANSFORMS and click on the Life, Stories of Transformation.
Rob, here is where i have very limited knowledge: As I said we use a flash based (read very user friendly) web hosting company. When I am in the back end to upload the swf file, I have only one option - "attach a video, attach a document, attach a link" so how would I upload a "folder" with more than one item to the server?
I thought it would be considered a video since the SWF file says SWF movie, but when I when i try to upload as a video, it doesn't come up as importable. (am i sounding really stupid?) Maybe I should admit that yes, I'm an ID5 newbie AND yes, I'm no spring chicken but I have been working in CS2,3,4 for several years and now 5 and am quite proficient in the create aspect of Adobe products. It's just now the technical part about how to actually get my in work published to the site.There isn't anyone else in my company able to help me so I have to reach out to this forum!
I love ID and this is just my first effort but I'm looking forward to creating many more interactive magazines for my company.
Thanks for any help.

How to setup the security based on roles in Organization.

Hi,
How to setup the security based on roles in Organization.
For example:Few users are Manager and a few user are Non Manager .Manager should have access to all work data including Non Manager and Non Manager should access based role.How to setup this? How OBI server identify the user role?
kindly let me know.
Regards.,
CHR

Hi,
You need to have Back End support to achieve this. In Back End you need to create two groups . You need to know what joins has to be made for which group (which is more important) and also make session variable for the userrole (with SQL supporting it). In the BMM layer, we need to put the security join conditions in the 'where clause'.
And make a common report. User loggin in with the respective userid will have userrole and joins assigned in the Back end. And they will be viewing the report according to their access.
Hope this will solve your problem.
Regards
MuRam

Database filled fields to a pdf form, how can i setup fields to receive ?

have a database that has a pdf form filler that can send filled fields to a form designed pdf, how can i setup fields to receive the specific fields ?

Hi housesboat,
Welcome!
Please try this to get you started: http://forums.adobe.com/docs/DOC-2412
Let us know if you have other questions.
Kind regards, Stacy

ACI Setup - How to Configure Data Warehouse Database - Partitoning

After reading the ACI Install Guide & Data Warehouse documentation, I have some questions regarding how to setup the database:
- Should database partitioning be setup? If so, what tables should be partitioned and what should they be partitioned by?
- Are there any other best practices or tips for setting up & tuning the database?
We are trying to avoid the (painful) situation of having to add partitioning later on; it is much easier to add it up front (if done correctly up front).
Thanks in advance for any advice!

On the tables recommended for partitioning, the partition key is nullable. If ATG inserts a null value into the timestamp column of one of the partitioned tables, we'll receive an ORA-14300 or ORA-14440 error. Oracle isn't able to figure out what partition to map that record to.
Can the columns be changed to NOT NULL? Or, can the application guarantee a nullable value won't be inserted?
Here are some example columns:
ARF_SITE_VISIT.START_VISIT_TIMESTAMP --> TIMESTAMP(6) null
ARF_REGISTRATION.REGISTRATION_TIMESTAMP --> TIMESTAMP(6) null
ARF_LINE_ITEM.SUBMIT_TIMESTAMP --> TIMESTAMP(6) null
ARF_PROMOTION_USAGE.USAGE_TIMESTAMP --> TIMESTAMP(6) null
ARF_RETURN_ITEM.SUBMIT_TIMESTAMP --> TIMESTAMP(6) null
Thanks

How to view flash based website?

How to view flash based website?

Download an app from the AppStore called iSwifter. It is the best app that brings flash capabilities that I have come across. You can play games or watch live tv on it. Megavideo, Putlocker, etc.
Hope this helps.

How i can open .jsp based website in my iphone 4s

how i can open .jsp based website in my iphone 4s

Sorry, but you can't. JSP pages are Java servlets, and the iPad does not support Java.
Regards.

How can I know the database is using Cost Based or Rule Based?

Hi all expertise,
How can I know the database is using Cost Based or Rule Based?
If cost based it is using, what methods are need to use to minimize the cost when database is running? And which tables I can see the performance of the database?
Thanks
Amy

how to see database setting ?
use this
SQL> sho parameter optimizer
NAME TYPE VALUE
optimizer_dynamic_sampling integer 1
optimizer_features_enable string 9.2.0
optimizer_index_caching integer 0
optimizer_index_cost_adj integer 100
optimizer_max_permutations integer 2000
optimizer_mode string CHOOSE
choose means if table statistics is available then it will use cost
else
use rule based optimizer
for seeing performnace of table use
set autotrace on
and run your query
if it doen't show cost.it means it use rule based
for using cost based
u will calculate table statistics
9i
dbms_stats.gather_table_stats('owner','table');
8i
analyze table <table_name> compute statistics;
hope it will help you
kuljeet pal singh

What is a Database-Driven Websites?

the term Database-Driven Websites?
what is it?
and how does this work?
thanks

> the term Database-Driven Websites?
> what is it?
> and how does this work?
well the data is stored in a database and based on the user's
selection(s), the data is served.
Think of a shopping cart. You click that you want to see info
about shirts, the result is that the database serves up a
list of
shirts. Next, you select long-sleeved and the database serves
up a list of long-sleeved shirts which may include pictures
and
other information.

How to make a value changed based upon values selected in dropdown menu

Hi,
I am making my first Dreamweaver website using Dreamweaver CS6 on a windows 8 PC.
I am trying to make a website where the user selects different criteria; in this example an ipod's model, condition and size from three seperate dropdown selections (similar to www.itrado.co.uk) and then based upon these selections a value for their ipod is shown. However i cannot work out how to display a value which remains on the same page and changes based upon the values which have been selected from the dropdown boxes. I was planning on creating a database and then creating a simple code which retrieves the value from the database which corresponds to the three selected values, however i am not sure how to go about doing this.
Any help would be greatly appreciated.
Many Thanks,
Henry

You need scripts for this. Try this jQuery tutorial
http://anthonygthomas.com/2010/03/14/display-form-fields-based-on-selection-using-jquery/
Nancy O.

How should I setup a SATA HDD on K8N Neo2 Platinum?

I bought a 200Gb SATA hard disk (Maxtor 6V200E0). This is the first time I work with SATA HDDs.
I plugged the HDD as I always did with an IDE HDD, and installed Windows XP -I have configured nothing-. The problem I'm experiencing is that sometimes Windows XP boots fine, and sometimes it doesn't. After the POST, the Windows Logo does never appear. I do not see anything.
Reading the Manual, I believe to understand that no matter if you only have one SATA HDD, I should setup nVRAID in the BIOS. Is that correct?. If I configure the nVRAID in the BIOS and setup RAID 0, should this problem disappear?. How should I setup my SATA HDD?. Is it the same to connect it to SATA1/SATA2/SATA3/SATA4 controller?. Or should it be connected into SATA1 -just because there's only 1 HDD in the system-?.
Thanks a lot!

Yes, unfortunatelly there's a major issue with this kind of HDDs and nForce3&4 chipset based mainboards. I found the following article at the Maxtor web-site -I asked them to send me the firmware upgrade; standing by-:
Question
I have heard or read that Maxtor drives are incompatible with nForce3 or nForce4 chipsets, or that I need a firmware update to make a Maxtor drive compatible with the nForce chipset. Is this true?
Answer
Note: This solution is only to be applied to the listed products and only when used with the nVidia© nForce3© or nForce4© chipsets. If you are unsure as to which chipset you have, please contact your motherboard manufacturer or visit your motherboard manufacturer's website for clarification.
Firmware updates are not upgrades. They offer no performance enhancements and exist only to provide specific compatibility resolutions. If you have a drive that is working properly in a computer, you do not need a firmware update.
Do not use a firmware update that is not authorized directly by Maxtor as there are variations of firmware for different revisions of drives that can render drives inoperable if applied to the wrong drive.
Applying firmware to a drive that is not authorized by Maxtor will void the warranty on the drive as this would be considered an unauthorized modification. Please see Maxtor's Limited Warranty Statement for more information.
If your drive came inside an OEM machine such as a Dell, Apple, Gateway etc., do not apply a firmware update at all as this will void the warranty which is held by that manufacturer. Please contact your OEM vendor directly.
The following issues have been identified with Maxtor SATA II drives and the nVidia nForce4 controller:
Data Corruption: If you are experiencing data corruption issues, the problem is not with the hard drive firmware. Please visit nVidia's website to update to the latest nVidia chipset drivers to resolve this issue. Make sure to be familiar with your motherboard specifications as there are several variations.
NCQ: If you are experiencing problems with NCQ (Native Command Queueing) please see nVidia's Knowledgebase ID 768 for more information with an issue nVidia is having with NCQ and the nForce4 chipset, and a forthcoming resolution. They also offer a solution to temporarily disable NCQ.
No Detection: If you are experiencing a problem with your Maxtor SATA-II drive not being detected by your nForce3 or nForce4 host controllers at bootup:
Note: This does not apply if your drive is connected to a non-nForce3 or nForce4 controller such as SIIG (Silicon Image), HighPoint, Promise etc. Many motherboards have multiple host controllers onboard so make sure you are familiar with your motherboard specifications and schematics.
The drives affected are those listed in the following table:
Model begins with:
Code (Firmware revision)
6B- or 7B-
BANC1980
BANC1B70
BANC1BM0
BANC1BY0
BANC1E00
6L- or 7L-
BANC1G00
BANC1G10
BANC1G20
6H- or 7H-
HA431BW0
6V- or 7V-
VA111610
VA101610
VA131610
VA141610
Example of a drive label:
Image
To check your current firmware revision on the drive without removing it from the system, use the Powermax diagnostic CD. Drive model, Serial and firmware Revision is displayed in the upper right hand corner after selecting the drive to test.
A firmware update to resolve this issue for Maxtor SATA II drives is available by contacting Maxtor Support. Please have the drive serial number and the Code number available, which will be listed on the top label of the drive itself.
Firmware updates will be issued for those drives experiencing this problem only, not for experimental troubleshooting. Due to the nature of a firmware code update, a drive can be potentially rendered inoperable so it is critical that data is backed up first.

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?

How can I setup a mail-specific passcode/restriction on iPad used by multiple family members?
Have an Exchange mail account setup and accessible in my mail on iPad... however my kids use it and i would like to restrict them from accessing this specific portion of the device. I tried viewing restriction options and do not see that i can apply a restriction specifically to Mail. Thanks for your help.

Not a feature of iOS. Check the AppStore to see if there are other
mail apps that allow passcode protection.
Or use Safari to log onto your email via a web-based interface and
enter your credentials each time. A bit slower, but the kids will
not know the details to login.

How do I access the web-based utility

I just purchased a wireless router...WRT300N. I want to access the "web-based utility" in order to update the firmware.
How do I access the web-based utility...help!
Thanks.

Access the router’s web-based setup page.
For instructions, click here.
Linksys Easy Answer 4030, applies to WRT300N
Upgrading the Linksys Router's Firmware
Hope this helps,
Lilla
Westell 6100 modem/router; Linksys WRT54GL v1.1 router firmware 4.30.9; Linksys WPC54G v2 Notebook Card; CenturyTel DSL using PPPoE

Automatically add user to a specific database based on the users title

Is there away to automatically distribute users to a database based on their title? My organization has different quotas depending on your job title, so if you are an Outside sales rep you get a 2 GB mailbox, and if you are a Inside sales rep you
get a 1GB mailbox.

You can do that with cmdlet extension scripting agent. You need to do some custom setup but there are some examples in below articles (specially part 3)
Understanding the Scripting Agent
Cmdlet Extension Agents (Part 1)
Cmdlet Extension Agents (Part 2)
Cmdlet Extension Agents (Part 3)

How to create a logical database?

Hi,
Can anyone tell me how to create a logical database? I am curious about it.
Thanks.
Awards will be provided.
Best regards,
Chris Gu

Transaction code for creating Logical db is se36.
Give the name as <ldbname>..
Specify the table names and the sub nodes according to your heirarchy.The root node used is zxxx_product and child node is zxxx_orders
The heirarchy used is ZXXX_PRODUCT---->ZXXX_ORDERS
write the below code under selections ...
Enable DYNAMIC SELECTIONS for selected nodes :
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE zxxx_product.
SELECTION-SCREEN DYNAMIC SELECTIONS FOR TABLE zxxx_orders.
Enable FIELD SELECTION for selected nodes :
SELECTION-SCREEN FIELD SELECTION FOR TABLE zxxx_product.
SELECTION-SCREEN FIELD SELECTION FOR TABLE zxxx_orders.
***User defined blocks :
****Root node
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001 .
SELECT-OPTIONS :
so_pname FOR zxxx_product-prname ,
so_pdelv FOR zxxx_product-prdeldate .
SELECTION-SCREEN END OF BLOCK b1 .
****Child node
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002 .
SELECT-OPTIONS :
so_odate FOR zxxx_orders-orddate ,
so_oqty FOR zxxx_orders-ordqty .
SELECTION-SCREEN END OF BLOCK b2 .
write the below code under include include DBZXX_PRODUCTTOP
TABLES : ZXXX_product, ZXXX_orders.
DATA : gt_root TYPE table of ZXXX_product ,
gt_chld TYPE table of ZXXX_orders .
write the below code under source code...
Call event GET Zxxx_PRODUCT
FORM put_zxxx_product.
TYPES : BEGIN OF ls_pid ,
prodid TYPE zxxx_product-prodid,
END OF ls_pid .
DATA : lt_pid TYPE ls_pid OCCURS 0 ,
lt_pid_tmp TYPE ls_pid OCCURS 0 .
STATICS lv_first_time VALUE 'X'.
STATICS ls_isroot_fields TYPE rsfs_tab_fields.
STATICS ls_isroot_where TYPE rsds_where.
STATICS ls_ischld_fields TYPE rsfs_tab_fields.
STATICS ls_ischld_where TYPE rsds_where.
IF lv_first_time EQ 'X'.
CLEAR lv_first_time.
          o
                + Declarations for field selection for node Zxxx_PRODUCT ***
" move table name to the corresponding field
MOVE 'Zxxx_PRODUCT' TO ls_isroot_fields-tablename.
" Read values from selection screen
READ TABLE select_fields WITH KEY ls_isroot_fields-tablename
INTO ls_isroot_fields.
" move table name to the corresponding field
MOVE 'Zxxx_PRODUCT' TO ls_isroot_where-tablename.
" Read values from dynamic selection screen
READ TABLE dyn_sel-clauses WITH KEY ls_isroot_where-tablename
INTO ls_isroot_where.
          o
                + Declarations for field selection for child node Zxxx_ORDERS ***
MOVE 'Zxxx_ORDERS' TO ls_ischld_fields-tablename.
READ TABLE select_fields WITH KEY ls_ischld_fields-tablename
INTO ls_ischld_fields.
MOVE 'Zxxx_ORDERS' TO ls_ischld_where-tablename.
READ TABLE dyn_sel-clauses WITH KEY ls_ischld_where-tablename
INTO ls_ischld_where.
"...Check whether entry is made in atleast one selection field:
IF NOT so_pname IS INITIAL OR
NOT so_pdelv IS INITIAL OR
NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_isroot_where-where_tab IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL .
"...Check whether entry is made in atleast one field in root node :
IF NOT so_pname IS INITIAL OR
NOT so_pdelv IS INITIAL OR
NOT ls_isroot_where-where_tab IS INITIAL .
SELECT prodid FROM Zxxx__product
INTO CORRESPONDING FIELDS OF TABLE lt_pid
WHERE prname IN so_pname AND
prdeldate IN so_pdelv AND
(ls_isroot_where-where_tab).
"...Check whether entry is made in atleast one field in child node:
IF NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL AND
NOT lt_pid IS INITIAL.
SELECT prodid FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE lt_pid_tmp
FOR ALL ENTRIES IN lt_pid
WHERE prodid = lt_pid-prodid AND
orddate IN so_odate AND
ordqty IN so_oqty AND
(ls_ischld_where-where_tab).
lt_pid = lt_pid_tmp.
ENDIF.
ELSEIF NOT so_odate IS INITIAL OR
NOT so_oqty IS INITIAL OR
NOT ls_ischld_where-where_tab IS INITIAL.
SELECT prodid FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE lt_pid
WHERE orddate IN so_odate AND
ordqty IN so_oqty AND
(ls_ischld_where-where_tab).
ENDIF.
******lt_pid contains all the selections based product ids
******Now retrieve all the records with the corresponding product ids
CHECK NOT lt_pid IS INITIAL.
IF NOT ls_isroot_fields IS INITIAL.
SELECT (ls_isroot_fields-fields) FROM Zxxx_product
INTO CORRESPONDING FIELDS OF TABLE gt_root
FOR ALL ENTRIES IN lt_pid WHERE prodid = lt_pid-prodid.
ENDIF.
IF NOT ls_ischld_fields IS INITIAL AND
NOT gt_root IS INITIAL.
SELECT (ls_ischld_fields-fields) FROM Zxxx_orders
INTO CORRESPONDING FIELDS OF TABLE gt_chld
FOR ALL ENTRIES IN gt_root WHERE prodid = gt_root-prodid.
ENDIF.
LOOP AT gt_root INTO Zxxx_product.
PUT Zxxx_product.
ENDLOOP.
ENDIF.
ENDIF.
ENDFORM.
write the below code under
include DBZXXX_PRODUCTNXXX -->
include DBZXXX_PRODUCTN002 .
form put_zxxx_orders
LOOP AT gt_chld INTO zxxx_orders WHERE prodid = zxxx_product-prodid.
PUT ZXXX_ORDERS.
ENDLOOP.
endform.
now write a report program and call the ldb by its name using get
get <ldbname>.
Reward if this is useful.
Regards,
devi.
Edited by: Devi Raju on Jul 15, 2008 9:13 AM

How do I setup a database-based website in Dreamweaver???

Similar Messages

Maybe you are looking for