How do I setup a drum track to play a triggered sound

I read somewhere that Logic Pro 9 would allow me to, for instance replace a poor snare drum with a prerecorded sample.
Can someone point me in the right direction?

start2finish wrote:
I read somewhere that Logic Pro 9 would allow me to, for instance replace a poor snare drum with a prerecorded sample.
Can someone point me in the right direction?
It's in the manual... you can't miss it... it's called "Drum Replacement"
pancenter-

Similar Messages

How do you export a drum track to Music XML from Logic Pro

I have a song in Logic Pro with a compound drum track that consists of a Drummer subtract as well as a manually written drum track using the same kit (for specific fills and kicks) as well as a drum line with auxilliary percussion. I kinda figured there was no way to combine the subtracts, so I am OK exporting each to Music XML separately (although if someone knows how to combine, I am all ears). I created a new software instrument using the same drum kit as the Drummer track and options-dragged the Drummer track to the new software instrument to convert it. However, when I view the Score Editor window for ANY of the three drum tracks, it does not come up in drum notation, but in bass cleff. The Style is blank and I don't know how to change it to drums.
I want to export to MusicXML to give my drummer music, so I am exporting this to Musescore.
Does anybody know how to export drum tracks properly? I am using Logic Pro 10.0.7
Thanks in advance!

Thanks for the quick response!
I got the Join part, but when I look at the Score view for the song below I don't get the characteristics editor your screenshot shows (see attachment one). However, I can pull this up if I select on the regions in the track I want and select Window -> Score Editor. However, under Style, I can select the pulldown with a bunch of pre-defined options, non-of which are "#Drums". How does one put #Drums into the Style field (see second attachment)?

How to make a custom drum track

APPLE, you need to LISTEN.
I want to be able to swiftly and intuitively create a new drum track and simply create every drum stroke for a song.
The current method is COUNTER-INTUITIVE.
There should be multiple ways to do this, but here's the basic method I'd prefer:
1. Create new track
2. Choose drums
3. Launch a substitute "keyboard" that gives you a drum kit and drum sticks
4. Record enable the track
5. Using keyboard commands and/or mouse clicks onto the drum kit, create your track
6. At the bottom of the interface, allow the user to see each drum stroke by time in the track, by drum type, and allow us to move notes around, etc.
*A separate piece of hardware should be invented to help create drum tracks within Logic Pro X.
*Maybe something similar to an X-Box's Kinect feature where we can hold drum sticks and hit the air.
If this 6-step method above already exists, it needs to be added as the first method taught with drums.

APPLE, you need to LISTEN.
Then posting here, is a waste of your time....
https://discussions.apple.com/docs/DOC-5671
Use the feedback form to make your suggestions to Apple...
https://www.apple.com/feedback/logic-pro.html
But first I would suggest you take the time to learn how to use Logic Pro...
http://help.apple.com/logicpro/mac/10/
...as what you are asking for is quite possible already...
Hint: Use the Musical Typing Keyboard to play/record sounds from one of the Drum Kits provided...for example.. one of the EXS24 kits... and then watch/edit via the Piano Roll....

How do I copy the drum track from my iphone over to my mac

Hello - I just bought an iphone and downloaded Garageband. I noticed that my iphone version of GB has some really useful drum loops that are not present on my Mac. How can I copy the drum loops from my iphone to my mac, which is where I do most of my recording? I don't want to just send them to itunes because they lose some functionality that way.
Thanks!
Mark

OkieMark wrote:
How can I copy the drum loops from my iphone to my mac
you would need to export the project. these instructions are for iPad, but i believe the steps are very similar, if not the same:
http://www.bulletsandbones.com/GB/GBFAQ.html#exportgbitogbx
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to separate/split different drum tracks from one recorded track

Hi,
Pretty hard to explain my intentions in the title, but i've recorded drums with one mic (so there's only one track), and i was wondering whether or not it's possible to separate the hi-hat, snare, toms, etc. from each other? So basically i want to create separate tracks for each of these sounds. I know it's a tricky and pretty specific question, but this would really come in handy since you can replace the drum sounds.
The biggest problem, if this were possible, is to separate tones that are recorded at the same time.
And yes, i tried the manual, but i couldn't figure this one out.
Thank you very much
Message was edited by: Goossens.Fre

Goossens.Fre wrote:
The biggest problem, if this were possible, is to separate tones that are recorded at the same time.
You are right: This is impossible.
The next best thing is to use Flex Time to find the attack transients and then split the audio at those transients, so you can move the individual snippets to different tracks.

HT204266 If I have a play list of various artists and on this list I have two tracks from the same album how can I combine those two tracks to play as one if I am using the shuffle feature?

An example would be Jackson Browne's "The Load Out" &" Stay".They should play one after the other but in a play
list on shuffle setting they don't. How do I combine two songs so they play as one in a shuffled playlist

Friveros wrote:
When I import my music files to iTunes will I be creating new files for every file I import? If the answer is YES; where are those files going to be stored and how much space will they use?
To begin with you can't manage FLAC in iTunes. The use of iTunes is at this moment limited to WAV, AIFF, Apple Lossless, AAC and MP3. But that's not a problem because if I understand you correctly you want to organize the MP3-files in iTunes.
When you import music files you can let iTunes copy all files and put it in an iTunes-media-Folder. You can make the choice in preferences-->tab advanced.
If you deselect the second blue checkbox (sorry, in Dutch) iTunes won't copy files as you import the files in your library. It will use the files from the place they are on the disk now. So you have a choice. But if you want iTunes to copy them, they will be placed in a folder called iTunesMedia. This is how it placed on your disk.
All files will be put in one music folder well ordered by artist and albums. If you want to make a backup of all your music you just have to copy the iTunes folder to another disk. You can backup all music at once. How much space they will use depends on the bitrate of the MP3 and whether you add more tagging to it. You can have iTunes add album artwork. That means adding gif or jpg files to your library. Are you using bitrate 320 for your MP3?
If you tell me I can give you estimates on the disk-space you will need.

How do I setup Multi Angle tracks to avoid Incompatible GOP?

I've been reading through some of the previous threads in an attempt to figure out how to set up my mult-angle tracks in FCP so I don't get the "Incompatible GOP structure" message in DVD Studio Pro. But nothing I do seems to work. Is there a way to actually do this without getting that error message?
yes, I tried making "self-contained" movie files.
My recent (partial) multi-angle project is showing the video is off by 6 frames when I line it up to the original chapter marker. I am able to slide back the multi angle tracks to line it up to the correct video frame but DVDSP will not Build the file saying that it is "missing marker for angle situation" & I cannot place a marker exactly where the encoded partial multi angle starts.

NO...Here's a rundown:
With multi-angle tracks, all streams must be the same length. With mixed-angle tracks, all alternate streams in each mixed-angle section must be the same length.
All streams must have the same resolution and frame rate.
The length and pattern of GOPs (Group of Pictures) must be the same for all streams (angles). If you are not using the integrated MPEG encoder, use an encoder that allows you to turn scene detection off.
All GOPs should be closed. You will not be able to cleanly switch between the streams if you use open GOPs.
Use a CBR encode
Have Googled all the info a read carefully?
http://www.google.com/#sclient=psy&hl=en&source=hp&q=dvd+studio+pro+multi+angles &pbx=1&oq=dvd+studio+pro+multi+angles&aq=f&aqi=g-v1&aql=&gs_sm=e&gs_upl=1380l725 8l0l7352l27l20l0l4l4l1l966l8441l0.2.0.1.2.3.6l14l0&bav=on.2,or.r_gc.r_pw.&fp=16c 82828e92b6176&biw=1024&bih=578

How to turn a sliced drum track into

midi notes, without losing the groove. The slices are playing exactly like the original audio loop. I also have a list of midi start times for each region.
What's the easiest way of doing this?
tia
Kaiser

I always used Recycle for this. Recycle makes slicing a loop up an easy task, and you can save the results as a REX file, and export a MIDI track to then use within Logic.
Logic's EXS will also import REX files, and create a MIDI region automatically.

How Do I Get My GB tracks to play with volume in logic!!!

i can copy my Gb tracks over to logic, but when i got to play them, they have no sound, the track is there and volume meters display activity, but no sounds comes out, how can i fix this!!!! please help

Hey Wacko, welcome to the forum. I had a similer problem with one of my clients GB tracks. It seemed that when I imported them into LP all of the outputs on the tracks switched to bus 11 and used a master fader that didn't show up in the arrange or mixer windows. To fix it switch the tracks to outputs 1&2 and add the master fader so you have control over it's volume. That's what worked for me. I hope it helps you. Good luck.
Stootka
17" MBP, G4 DP 1.25 Logic Pro 7.2.3 Mac OS X (10.4.8) 2gig ram

How do I setup the mic so I can hear realtime sound ?

Simply trying to setup realtime sound monitoring the bird feeder outside. Not sure how to accomplish this. Do I need some sort of software, or can soundblaster do it's

Does not anyone know how to do this? Very strange.

How do i setup my MacBook Pro to play music from Spotify or Deezer via a separate Airplay enabled speaker? I know my MacBook is Airplay enabled because i can see the icon in iTunes, which works fine, but not when general web browsing.

Airplay music from Spotify on a MacBook Pro

I would sign out again, then update your Mac (latest version, not 10.7.3 as shown in your signature), open "Settings > Mail, Contacts, Calendars" and then choose iCloud and sign in again. I would also do the same on your iOS device (sign out and in). Make sure to confirm the message when you will be asked to merge the contacts with iCloud.

Logic Pro 9 When I open a file which contains a composition of many midi and audio tracks, no sounds play or some tracks are playing the wrong sounds. The project was working perfect when it was saved and closed down.

Does anyone else understand what is happeneing, its like all the tracks and plugins are confused and are playing all the wrong sounds if at all. I've checked the audio setting which seem fine but cant understand where it all goes horribly wrong. Thanks

Is it just a Logic problem; can you for-instance play audio in iTunes trough the Tascam? And what about new projects; you get audio there?

How do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please

how do i use parallel compression for 4 drum tracks in Logic pro 7.2.3 Please. my version is 7.2.3 and my son did his drums on 4 tracks. 2 OH's 1 Kick and 1 Snare. Were confused because we cant figure out how to do parallel compression on the older logic version 7.2.3?

I can't remember when the Aux tracks became the new buss tracks, so I'll spell this out using busses.
The way I do it, is I assign all my drum tracks to a buss, say buss 1.
Then, on buss 2, I assign it's INPUT to buss 1.
So buss 1 (all the drums) are feeding into buss 2 simultaneously.
Put a compressor on buss 2, turn the fader down all the way, then as the track is playing, bring buss 2's fader up slowly, until you hear the effect you're after.
You could also do this using sends on the 4 drum tracks, set to feed the buss with the compressor on it.
I hope I haven't forgotten anything particular to that version of Logic. See if this helps...

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

I am trying to import standard midi file that I created in Band in a Box into Logic Pro 9. I can not get all the track to play with internal instrument sounds... only the piano track. how can I get the others to play... drums, bass etc???? Help

Don't drag the midi into an open Logic project. The tracks won't set up correctly.
'Open' the midi file with Logic as if it were a Logic project. Then all the tracks will be set up so you can start editing them and applying better saved sounds and instruments, but you'll be at a starting place where you can hear what's going on.

I can´t get the drum tracks of my Korg M50 to sound in garageband. Does anyone know how?

I can´t get the drum tracks of my Korg M50 to sound in garageband. Does anyone know how?

If it's actual audio out from the M50, you just need to hook up its audio outs into whatever you're using to get sound into the computer (audio interface, the computer's input jack, whatever it is that you're using), fire up a real audio track, and record.
But if you're having difficult with drum tracks, that's usually this:
Drum tracks on many MIDI devices default to MIDI channel 10. MIDI channel 10 is like the universal MIDI channel for drum tracks. However, GB likes to see MIDI channel 1, regardless of the instrument.
Therefore, if this is a MIDI issue, you'd need to change the MIDI channel on your drum tracks from 10 to 1 to make them GB friendly.

How do I setup a drum track to play a triggered sound

Similar Messages

Maybe you are looking for