How do I setup a secondary email held with the same ISP

I have an email account with my ISP, however I have created a secondary address with that same ISP.
I mainly use the secondary address for my email.
I have successfully set up the primary email account but don't know how to add the secondary address for viewing.
Can anyone tell me how I can set this up?
Thanks

Many thanks
Problem is that when I try to setup the second email address, I have to use the same email setup password as the primary address. This is then rejected by the email provider.
Thinking that I will set up a gmail ac and fwd all my secondary address emails to it.
Thanks again for your quick reply

Similar Messages

HT201363 how could i change my secure email to be the same as my apple ID email.

how could i change my secure email to be the same as my apple ID email.

Try to manage your account at https://appleid.apple.com or reset your password.

How to open 2 separate Yahoo email accounts at the same time? I can do this in IE by clicking File | New Session. I dont see how to do this in Firefox.

How to open 2 separate Yahoo email accounts at the same time, without using an add-on or plug-in? I can do this in IE by clicking File | New Session. I dont see how to do this in Firefox.

You need two independent set of cookies to achieve this and only an extension can do this.
* Multifox: http://br.mozdev.org/multifox/
You can get a second set temporarily by switching to Private Browsing mode and keep the current session open, but that still allows you to only one access one account at the time and you need to login again after reverting to the first account by stopping PB mode.
*https://support.mozilla.org/kb/Private+Browsing
* https://wiki.mozilla.org/Firefox3.1/PrivateBrowsing/SecurityReview#Configuration
*browser.privatebrowsing.dont_prompt_on_enter
*browser.privatebrowsing.keep_current_session

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [e.g., with "@gov.ca"; Snow Leopard].

Need to know of a method / process that can be used to send the same msg to all those appearing in my email listings with the same extension after the "@" sign in their address(es) on my macbook [Snow Leopard].

If you simply want to send the exact same message to everyone in your address book with emails ending in "@whatever.com", you can do the following:
Create an email with subject, message and attachments but no addresses
Open Address Book, All Contacts
Search in Address Book for @whatever.com
Select the results and drag them into the To: or Bcc: field of the email. If Bcc: then put your email address in the To: field.
Send the email
This will not personalize the emails (such as with "Dear firstname:" at the top of the message) but it will let you send an idential message to everyone who meets your criteria.

How to import my photos to Photos libray with the same folder name?

how to import my photos to Photos libray with the same folder name?

You can import a folder of photos to the Photos.app by dragging the folder onto the Photos icon in the Dock. That will open an Import panel, and you can select to import all photos from the folder. But the folder name will be lost.
The photos will appear in the "Last Import" album. Select them all in the Last Import and create a new album with the folder name (fFile > New Album).

How can I get "IMAQ Line Fit" stable (with the same points)

How can I get "IMAQ Line Fit" stable (with the same points)
I my vision applications I use a lot off times "IMAQ Line Fit"
some times the results are not Stable.
See vi and word document attached.
When I take the same points but in a other order (sort)
then suddenly all points are used.
In this case I was looking for a edge in vertical direction (Y).
I found the points but "IMAQ Line Fit" did not function well.
I tried changing all settings like pixel radius and minimum score and
also threshold and so on. But no result.
Then I sorted the points reversed and that worked. See vi.
I use labview Labview 8.6.0 and IMAQ machine vision.
Maybe this problem is solved in a newer version.
Please let me know.
Thanks
Attachments:
TEST-imaq-line-fit-86.vi ‏169 KB
IMAQ-Fit-Line-Problem-86.doc ‏230 KB

Thank You for your reaction Hossein,
This "one application" uses "Line fit" about 20 000 000 times a day.
about 200 will go wrong. With your setting the the "Line fit" for this occasion will work but others will go wrong.
A algorithm should be:
1e Stable, when using the same points and settings the result MUST be the same. How the points are sorted should not matter.
2e Accuracy
3e Speed
4e Testing. Is very difficult but al least close points and the same points and sorting ... should be done
NI now as made a " IMAQ Line Fit" Problem CAR (Corrective Action request) 298016.
so in the future there will be a update.
In the mean while a made a line fit which uses Bisquare option from Linear Fit.vi :
from C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\analysis\6fits.llb
This is a temporary fix because "IMAQ Fit Line VI" is not so stable.
Because outliers should be rejected only Bisquare does this reasonable.
This program does NOT USE "Minimum Score" and "Pixel Radius"
Valid fit = When there are enough points within Outlier_Distance.
Algorithm steps:
- Determine if line is more horizontal then vertical, Compare DeltaX with DeltaY
- If DeltaX <= DeltaY then SWAP X Y and later Swap back
- Sort Points at on X value
- First : Bisquare Linear Fit
- Calculate distances to the found line for all points
- Inliers: Points within Outlier_distance
- Outliers: Points outside Outlier_Distance
- Only use Inlier Points
- Check again if DeltaX < DeltaY then SWAP X Y later SWAP back again
- Second : Bisquare Linear Fit only with the Inlier Points
- Results are from the second fit
Warning : This Program is Not so accurate and Not so fast
See attachments it is in labview 8.6
If some has a improvement please let me know.
Thanks
Attachments:
svi_fit_line_Bsquare_and_draw.vi ‏18 KB
Fit_Line_Bisquare_Linear.vi ‏40 KB

HT4865 How can I have multiple icloud email accounts using the same rescue email account.

I have several Iphones for my business for managers to use.
I would like to set them up to send me the recovery emails but it seems only one icloud address can do that.
Is it possible to have multiple icloud email accounts using the same - seperate recovery email address?

Unfortunately, you cannot change your primary @me.com or @icloud.com email address, you could however create an alias or create a completely new account.

How do I set up two email address on the same account?

Using Mail in Mac OS X 10.6.2 and moving to Mac for the first time, I have been unable to set up two email addresses on the same account. Entering them, separated by commas, as advised in the Help does not seem to work. I have tried making them both the same password and have tried separating the passwords with a comma but no luck. Unable to set up another account for the second address because it correctly tells me that the account already exists.
Is there a way?
Thanks for any help.
AllanGlen

After a comprehensive trial and error session, using a new Guest Account each time to be sure of no contamination from the previous trial, I have finally cracked it!
The problem was logging on to the outgoing server.
Setting up the first account was fairly straightforward but if I allow Mail to do it automatically I am unable to send because Mail has defaulted to 'Authentication Required' when my server does not require it. Setting the account manually without authentication enables send and receive to work OK.
If i try to set up the second account automatically, Mail crashes.
If I set it up manually and choose 'No Authentication', Mail crashes.
If I set it up manually and choose 'Authentication Required' and enter the full email address as the User Name together with password, Mail crashes.
If I set it up manually and choose 'Authentication Required' and enter the first part of the email address together with password, Mail crashes.
However, if I set it up manually and choose 'Authentication Required' and enter the first part of the email address as User Name and no password, Mail accepts it and sets up the account.
At this point the account receives mail but cannot send it.
If I go into the Mail preferences and try to edit the outgoing server details, Mail will not accept no Authentication.
I eventually found that if I uncheck the 'Always Use This Server' box, all account then use the server on the first account, which is correctly set up.
Now I have my four email accounts all able send and receive.
One little concern remains. In Outlook Express I could look at the properties of a received email and see what address it had come from, together with many other details. I haven't found out yet whether this can be done in Mail. I just wonder whether if I reply to some email, it will appear to have come from a different address from the one it was sent to.
Thanks again for all the inputs.
Allan

How do you setup a user mobile account, with the home directory stored locally and not synced to the server?

I want to be able to setup a user mobile account, with the home directory stored locally and not synced to the server. What is the best way to do this? I am running Server 10.6 with 10.6 clients. Open Directory will be used to authenticate and manage preferences. Also, this one account will be used simultaneosly in a computer lab setting, so files will be stored locally in the client, hence the need to NOT sync to the server. Any Ideas?

currofelix wrote:
So what does WGM Look like in the Home Tab? afp://servername.domainname/Users? or afp://Users?
The attached screen shots should help you:
You will only have to do this step once. Obviously you want to use the user's shortname here.
Then, you will see this as an option in WGM:

How do i create more than one account in Mail with the same isp?

I am using suddenlink and have set up one account for Mail. It seems to work ok. I want to set up two others with the same provider but can't.
Let's call the first account, account1
It works.
I set up another and call it account2.
It is using the same provider which already has the account set up on their end, but how do I set it up to work on my end? Does it need to use the same username as account1 or can it use the user name for account2? I hope this makes sense.
I just want to use three email addresses from the same provider with mail. I need some help. Please?

Initially you need to configure via the provider's own web based control panel multiple e-mail accounts. If they don't have one, work it out with their customer support to have three distinct mail accounts. Then you can setup multiple logins by adding new accounts to mail. Since mail checks all accounts per Mac OS X user account simultaneously, it probably is best to use different usernames on the same internet provider. If you don't want mail to show all the information from all three mail accounts simultaneously, configure Apple menu -> System Preferences -> Accounts to have multiple users on your computer, and configure each of the internet service provider accounts for each separaet user on Mac OS X.
Message was edited by: a brody

How do I install a new Exchange account with the same address as my old Exchange account and have my bcc mail not go to the old account?

I have an iPhone 5s running iOS8 and an iPad, up to date. I have recently changed my mail server but not my email address. My "old" mail account is an Exchange account and I have also set up a "new" Exchange account with the same address but with the new mail server details. When I receive outside, third party emails they are routed correctly to the "new" Exchange account but when I bcc myself or receive other emails from any account with my domain name the emails are routed to my "old" Exchange account. I have changed the default account settings to the "new" Exchange account. Also, if I send myself an email from my laptop, through the new mail service provider, it is routed correctly on my laptop but incorrectly on my iPhone and iPad. It appears as though the Apple products have cached my email address and routing and won't look to pick up the new mail server details. I don't see anything in the mail account settings or contacts that allows me to refresh or clear the cache. The result is I now have mail in 2 accounts. If I can get the misdirected mail from the odl account to the new one I will then make the old account inactive. Anyone have any ideas on this one?
Thanks in advance for your time and ideas,
DAA

Can you set up a rule in your old account to forward mail to your new account and then delete it from the old account?
(1012)

How do i set up a second ipad with the same apple id

I bought two new iPad 2 's for my office. They are for patient self check-in and I would like to set them both up with the same apple ID. How do I go about setting the second iPad up once I finished setting up the first one?
Thanks!

Just like you did the first one.
How to use multiple iPods, iPads, or iPhones with one computer
http://support.apple.com/kb/HT1495http://support.apple.com/kb/HT1495

HT4436 Can I have more than one iCloud email address with the same Apple ID?

I created an iCloud email account and I was wondering if I could make another one with a different [email protected] using the same Apple ID.
Can anyone help me?
- Alex

You can have 3 aliases (additional addresses) to set them up go to Mail>Preferences>Accounts>Edit Email Aliases

HT202213 How can I authorize more than 5 computers with the same Apple ID?

Somebody knows how to authorize more than 5 computers with the same Apple ID? I have One Apple IMac, Apple TV, I-PAD, 2 HP PC's, One I-Phone and one I-Pod Touch. I would like to have the possibility to use as I wish the same Apple ID on one of those without deauthorizing another one.

"Somebody knows how to authorize more than 5 computers with the same Apple ID? "
You cannot.
Authorization applies ONLY to computers. Ipods/ipads/iphones/Apple TVS are NOT authorized at all.

How can i use Mail on 2 macs with the same mail address?

Hi,
I have two Macs, connected through WLAN. From each Mac I can use Mail (sending and receiving) with the same mail address. This worked well; on each Mac I have separate files storing the mails (input, sent, trash, …).
Some days ago I had to change the provider. (Perhaps this may be the reason for my problem?) Now both mail systems are connected - in the way that if I put on Mac *1 a mail into the trash it is automatically thrown into the trash on Mac *2.
What is to be done to separate the two systems (i. e. make them independent of each other)?
Hans

It looks like you are using a IMAP mail account, a protocol used by most email providers nowadays. Read -> http://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
The main feature of IMAP is the sync of all the changes you do on your mail account. If you want to keep your mails on one Mac, have a look at this site -> http://kb.mit.edu/confluence/pages/viewpage.action?pageId=3908294

How do I setup a secondary email held with the same ISP

Similar Messages

Maybe you are looking for