How do I setup my Time Capsule as a wireless router?

I bougt a Time Capsule and installed on an existing network to run backup for my Mac. I got it to work succesfully, but.
Now I have moved, and need to use it as a wireless router and still keep running backup.
How do I do this?
Thanks

but I need a modem and connect it to the Time Capsule?
Yes. You need to contact an Internet service provider who will set things up for you and provide you with a modem.

Similar Messages

  • How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

    How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

    Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
    There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
    Is it tall like this.
    Then it is Gen5.
    otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
    Open the Airport utility and give us a screenshot of the summary page.
    That will also help us determine that you have the TC, which version and how it is setup.
    You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
    I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
    You do not do anything in the TC.. set it up in the Ubee router.
    Port forward 548 to the TC in the Ubee router.
    And make sure the TC has a static IP in the Ubee router.
    Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
    You are fighting hard because Apple made this hard.. not easy.

  • Setting up Time Capsule as primary wireless router and enabling port forwarding

    I am attempting to setup my Time Capsule as the primary router on my wireless network. I have an Actiontec Verizon FIOS router that I am connecting the TC to using ethernet, and I was then going to turn off the wireless function on the Verizon router so that the TC will be the only wireless router. I am not exactly sure how to go about this, and I also have to connect a wireless device to the TC that requires a static IP address and port forwarding enabled so that I can access from my iPhone. I am completely lost on how to do this, any help will be greatly appreciated.

    Unless Verizon has made a major change in the last few days, you will not be able to use the TC as the primary router......simply because it is not possible to configure the Verizon router to act as a simple modem......which is what it must do if you want to have the TC act as the primary router on your network.
    As LaPastenague has explained. turning off the wireless on the Verizon modem/router will not make it a modem.  It will still be a wired modem/router in charge of the network, not allowing the Time Capsule to take over the role of main router for the network.
    But, let's assume that I am wrong. Please check with Verizon support and ask them........
    1) If it is somehow now possible to configure their modem/router to act as a simple bridge mode modem. If they say that this is not possible (or they will not support this).....
    2) Ask them if they can provide you with a simple, bridge mode modem......instead of the modem/router that you have now. A simple modem will have only one Ethernet port, and it will not offer any type of routing or wireless service at all.)

  • How do I use Time Capsule as a wireless router and turn my current one into modem only

    I have a crappy modem/ router and before I purchase a new modem I want to use the modem (no wireless) feature of my router.
    Question #1
    How do I use my Time Capsule as a router?
    Question #2
    If I do this will I still be able to wirelessly back up to my Time Capsule?
    Question #3
    How do I turn off (wireless) or the router function of my modem/ router?
    Question #4
    I then want to connect all my wireless devices to my Time Capsule making that
    the main WIFi in my house. I am assuming this is possible it is I just dont know how to go about doing this myslef without guidance, and the Airport Installer is confusing to me.
    Thanks!

    Question #1
    How do I use my Time Capsule as a router?
    Connect an Ethernet cable from one of the LAN <-> ports on your modem/router to the WAN port (circle of dots icon) on the Time Capsule.
    Open AirPort Utility and click Continue to follow the guided setup to  configure the Time Capsule to "create a wireless network".  Select the "Bridge Mode" option when it appears during the setup. (AirPort Utility will normally do this for you)
    Question #2
    If I do this will I still be able to wirelessly back up to my Time Capsule?
    Yes
    Question #3
    How do I turn off (wireless) or the router function of my modem/ router?
    We prefer not to guess at things, but since we do not know the make and model number of your modem/router, and this is an Apple support area, we have little choice.
    In general, you would enter the default IP address of the device into your browser to bring up the configuration pages (check your documentatio on the modem/router for this information, or it may be on the back or bottom of the device. An example of a default IP address is something like 192.168.1.254
    There will be a wireless settings page that will allow you turn off the wireless function of the device.
    If you acquired the modem/router from your service provider, they should be able to tell you how to do this as well, or if you check the manufacturer's website, they will likely have a support area for questions like this.
    Question #4
    I then want to connect all my wireless devices to my Time Capsule making that
    the main WIFi in my house.
    You will need to log on to the Time Capsule wireless network from each device and enter the password to connect. Most computers will "remember" the setting so that you do not have to enter the password each time that you connect.

  • Time Capsule and FiOS wireless router

    Can I connect the Time Capsule to my FiOS router and then disable the wifi feature on the FiOS router?

    Are there any known issues with the TC in general, particularly from the wifi perspective?
    TC is much better than it was.. make sure you keep it cool.. place it up from the bench on a couple of pencils.. that stuff about conductive rubber.. ignore it.. rubber in all its forms is an insulator and holds in heat. If it does start running really hot.. it has a fault and you should take it back.. Same with hard disk.. they occasionally go bad.. so backup to it.. fine.. storing files on it.. no don't do it.
    Remember it is covered under your computer applecare.. so if you have any computer with extended applecare it will cover TC with certain conditions.. but that gives the TC effectively 3years warranty.. after that.. dispose of it and buy a new one.. the TC is not going to be reliable as the hard disk has been starting and stopping multiple times every day for 3years.. just don't trust them.
    Wireless is ok.. I don't think it is particularly good range wise. Although Apple said how much better it was than previous Generations.. I have had all 4 now.. and performance in my experience was line ball between all of them. Apple design their routers to work very well with AEBS or AEx so if you want to extend wireless it is simple.. just it doesn't work with any other brand.. apple now reflecting a rather dark empire tendency.. they used to critize in others.
    Clarification question...how do I backup my current files on the Lacie to the TC? Would that simply be connecting the two devices via USB and copying over?
    Backing up TM files?? Not a good idea.. TM works differently on local disks and network disks.. and TC is best left to do its own stuff. If you mean moving actual file storage.. don't. The TC is not a file store.. it is a backup target.. TC has no way to back itself up.. and TM cannot backup a network drive .. so you would have to buy 3rd party software anyway.
    Also USB on the TC is purely for printer and USB connected disk.. but you cannot directly copy from one to the other.. it would have to copy over network to the computer and then back to the TC.. it will be 2x to 4x faster if you do want to copy files to use Lacie plugged into the computer.. and copy to the TC. At least files are only going one way.

  • Setting up time capsule with existing wireless router and another time capsule

    Hello,
    I just bought my first mac (MBP) and a time capsule. We already have a wireless router, and my brother has an imac and his time capsule connected to it. The apple support people said that i couldn't use my new time capsule as a backup for my files because it would have to be in bridge mode and that would cause all sorts of problems and the backup would probably fail. That I would have to use my brother's time capsule to back up my files.
    Is this true?? I find it hard to believe this issue hasn;t come up before.
    Thanks,
    Deborah

    Thanks, Bob! If I may impose on you a little bit more, would you be able to guide me a little bit in terms of the setup?
    Would I need to connect my time capsule directly to the router for first time set up?
    If so, would I have to keep it connected to the router all the time after the first time set up, or can I keep it in another room?
    Our wireless network was created back when we were a Windows household, so we still control it using Network Magic on an old laptop.
    I unlocked the network (using Network Magic) when I tried to set up the Time Capsule (wirelessly, and before calling Apple), and after entering the network password my macbook recognized the TC and I got the good little green light on the TC. As soon as I locked up the network, I got the flashing amber light on the TC and airport utility couldn't find it anymore (using Airport utility version 6.1)... I unlocked the network again, the light turned green. I locked it back up, the light started flashing amber again...
    Thanks, I really appreciate your help!
    Deborah

  • Using Time Capsule with 2nd wireless router

    Hi,
    I have been trying to extend my time capsule and have had limited luck.
    I have my time capsule in my office which is a separate building behind my house. The cable internet service runs to this location. I purchased an airport express and put that in the house so we would have wireless access in the house. I have tried every location available in the house and it is still really slow. (I get a transmit rate of 270 in the office. In the house it ranges from 7 to 20).
    So, I was thinking maybe I could run a 30ft or so ethernet cable from the time capsule to another wireless n router in the house. So when out in the office I would connect to the TC and in the house to the Linksys (or whatever I buy). My question: would this even work? Can I have 2 wireless routers and would the Linksys work if it was connected via ethernet to the timecapsule vs. being connected directly to the cable modem?
    Alternatively, can you connect 2 cable modems to one incoming cable line if I could find another cable modem somewhere?

    Sure, happy to help.
    Temporarily, move the Express close to your computer and connect an ethernet cable from your computer to the Express for the configuration.
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Select your AirPort Express and click Manual Setup
    Click the Wireless tab below the row of icons
    Wireless Mode...set to Create a wireless network
    Wireless Network Name...Exact same name as your Time Capsule network
    Radio Mode....802.11n (802.11b/g compatible) would be a good choice
    Wireless Channel...Automatic
    Wireless Security....Exact same setting as your Time Capsule network
    Wireless Password....Exact same setting as your Time Capsule network
    Wireless
    Click the Internet icon
    Look for the setting for Connection Sharing at the bottom of the page and set this to "Off (Bridge Mode)"
    Click Update at the lower right of the window and close AirPort Utility immediately and disconnect the ethernet cable as soon as you see the message that your settings have been stored.
    You can now move the Express to the location you need and connect the ethernet cable and power it up.

  • Using Time Capsule with existing wireless router

    I am thinking about getting a TC, but I wanted to know if the following configuration would work:
    DSL modem to existing wireless B router. Then have the TC recieve internet from the existing wireless router.
    Basically I want to put the old router in the basement where the only wiring is, but put the TC upstairs on my desk so I can connect the printer to it.
    Thanks!

    Although, you can join an existing network using a Time Capsule as a wireless client, it’s recommended that the existing network is an 802.11n network.

  • We use a time capsule as the wireless router for our house.  We cannot get service to the whole house.  Is there anyway to boost the signal?

    We use a 2TB Time Capsule as our wireless airport for the whole house but we can't get the signal to all rooms.  Is there anyway to boost the signal?

    You to purchase an extreme or express and use it as wrieless extender.. that is the only way Apple provided for boosting the signal.

  • How do I setup my time capsule to be a hard drive for two macs?

    I basically want to be able to use my time capsule as a hard drive for both my imac and macbook pro to save storage on both but obviously to have access to everything on both machines. How do I set this up?
    Thanks.

    I would recommend you use an excellent backup App that is capable of doing what you want, such as "Carbon Copy Cloner" or "Superduper".
                    http://www.bombich.com/download.html
                    http://www.macupdate.com/app/mac/13803/superduper!
    Hope this helps

  • How do I setup my time capsule with wireless internet?

    I I have "Clear" so theres no place on the device to plug up an ethernet cord.. PLEASE HELP!!!! Would like to use the time capsule mainly as an external hard drive. PLEASE HELP!!!

    For factory reset.. what model do you have??
    The Factory Reset Gen1-4.
    Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
    No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    Factory reset Gen 5
    Hold in reset for about 5sec until the status light flashes quickly.
    If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
    Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
    To join a wireless network and assuming you are using a Mac with v6 utility..
    1. Full reset of the TC. as above.
    2. Open the airport utility.. the Mac must have internet connection to the wireless router which is working.
    Click on other wi-fi devices which is your reset TC.
    3. The utility will choose the wrong item. You are not creating a network.. so click options.
    4. Click add to existing network.
    5. Make sure you then get the right network.. this is from my main router.
    6. The utility will then use join. Fix the name to short, no spaces and pure alphanumeric .. for better networking.
    7. The utility should complete the setup.. and you will probably need to fix a few things.. passwords or other errors fix them all up.
    8. You can now click edit and go the wireless tab and see the details.
    This will give you extremely slow speeds.. it is highly NOT recommended.

  • Setup older Time Capsule 1TB for wireless connection via newest Airport Configuration

    Hi guys
    I have a Time Capsule 1TB (first generation I think) which works fine. I don't like to many cables on my desk, and now that I have my new iMac next to my MacBook, I would like to setup the TC as part of a wireless network (so that it doesn't create a new network and I also don't need an Ethernet cable from TC to Computer of from Modem to TC).
    Now, in the 5.6 Airport Configuration, no problem at all to get this fixed, but the new generation makes me a little crazy.
    So: how can I setup the TC as a part of an existing WI-FI network with the newest Airport Configuration and so I don't need Ethernet in any way?
    Thanks!
    Bob    

    BUTT.. if you want to.. there is no reason you cannot use a big UGLY FATT BUTT.. v6 utility has taken away loads of useful things.. !!
    Install 5.6 utility on Mountain Lion.. this is well worth while.. Some stuff is just better done manually.
    Google as there are a number of methods.. here is mine. It has the advantage of using the free utility unpkg. Not pretty but works easy peasy.
    How to load 5.6 into ML.
    1. Download 5.6 for Lion.
    http://support.apple.com/kb/DL1482
    Click to open the dmg but do not attempt to install the pkg.. it won't work anyway.
    2. Download and install unpkg.
    http://www.timdoug.com/unpkg/
    Run unpkg on the desktop.. it is very simple.. drag the AirPortUtility56.pkg file over to unpkg.. and it will create a new directory of the same name on the desktop.. drill down.. applications utilities .. there lo and behold is Airport utility 5.6 .. drag it to your main utilities directory or just run it from current location.
    You cannot uninstall 6.1 (now 6.2 if you updated) so don't try.. and you cannot or should not run them both at the same time.. so just ignore the toyland version.. the plastic hammer.. and start using 5.6.. a real tool.
    For screen shots see this post.
    https://discussions.apple.com/thread/4668746?tstart=0

  • How do i set my time capsule as a wireless external hard drive?

    it is currently doing regular automatic back-ups of our system, but we want to set it as our hard drive as well.

    If Time Machine backups are occurring correctly, then you already have the Time Capsule set up as a hard drive on your network.
    Although not necessarily recommended, that means that you can manually drag/drop or copy/paste data directly to the Time Capsule disk.
    Are you asking how to do this, or how to locate the drive?  Please clarify.

  • How to connect time capsule to existing wireless router

    Hi
    I am struggling to set up my time capsule is it possible to connect it to my existing wireless router or does the time capsule have to replace it as I have tried to do that but I cannot get a connection or signal to the WAN port?
    I have the set up instructions but its not helping I am a complete novice at this.
    Any help or links much appreciated

    Yes you can.
    Just plug the TC into one of the Ethernet ports on your router. WAN port on the TC.
    Before you do that, set the TC up to be in 'bridge mode' in AirPort Utility.

  • Can I use Time Capsule with Broadband wireless router that also feeds a PC?

    I have just bought Time Capsule but am afraid to open it in case it stops the wireless broadband connection to my Mac and a PC in another room. Any advice?

    There is no vpn built into the native firmware of N16 so I presume you are going to use third party.
    Just plug in the TC and bridge it.. ie go to Internet tab of airport utility and select connection sharing off.
    wireless then you will need to figure out.. you can setup roaming on 2.4ghz by using identical wireless name = ssid and security but lock both to different channels.. pick out of 1, 6, 11
    In a PC network make sure you use the TC with a new name.. no spaces no special characters.. same with wireless. TC also restrict wireless on 2.4ghz to only 20mhz.. if you have the N16 set to 40mhz you will have to be extra careful with channels.. 40mhz will use up two channels and only one remains.. so your household will have filled the 2.4ghz.
    Someone suggested you can turn off 2.4ghz in the TC by not naming it.. When I try that it kicks up an error that it has to be named. So perhaps someone else has a suggestion of how to turn off 2.4ghz.
    You can turn off 5ghz by unchecking it. Seems mighty strange that you cannot turn off 2.4ghz but you can turn off 5ghz.

Maybe you are looking for

  • Image Type In Crystal Report

    I am trying to use a  .gif logo in my crystal report but it's give error that crystal report does not support .gif file. Please tell me what type of image file(extension) i can use in Crystal Report?

  • Convert invoice to PDF format and send email automatically

    Hello, We have a requirement weherin when a billing document is created in SD with transaction code VF01, the invoice should automatically get converted to PDF and mail should be sent to the customer's external email id. Please seggest how this can b

  • How-to hide the portal file shares on Windows

    Hi, Does anybody know how to hide the default file shares created by SAP NW 04 in windows? In other words: what I'm trying to accomplish is renaming the sapmnt share and saploc share (both on the E:\usr\sap\ folder) to sapmnt$ and saploc$. I know how

  • Problem with tables -- need help!

    I am having problems with table formatting, when using Preformatted text. The tables look fine in the WYSIWYG editor, but have lots of extra space above and below the text when looking at the output files. I will attach the code from one of the HTML

  • Problem in triggering the correct workflow on  AdobeForm submission for PCR

    Hi All, I am facing a problem involving triggering of workflows through Adobe form submission. I have created a scenario for "Employee seperation" in QISRSCENARIO transaction and assigned it to an approval workflow. I have also activated and assigned