How do I setup my time capsule with wireless internet?

I I have "Clear" so theres no place on the device to plug up an ethernet cord.. PLEASE HELP!!!! Would like to use the time capsule mainly as an external hard drive. PLEASE HELP!!!

For factory reset.. what model do you have??
The Factory Reset Gen1-4.
Unplug your TC. Hold in reset. and power the TC back on.. without releasing reset for about 10sec. When the status light flashes rapidly; release it.
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC will reboot after a couple of minutes with default factory settings and will wipe out previous configurations.
No files are deleted on the hard disk.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Factory reset Gen 5
Hold in reset for about 5sec until the status light flashes quickly.
If your AirPort Time Capsule still doesn’t respond, do a similar reset to the Gen1-4.
Unplug your AirPort Time Capsule .. hold in reset and power the TC back on.. without releasing the reset.. wait until status led flashes rapidly.
To join a wireless network and assuming you are using a Mac with v6 utility..
1. Full reset of the TC. as above.
2. Open the airport utility.. the Mac must have internet connection to the wireless router which is working.
Click on other wi-fi devices which is your reset TC.
3. The utility will choose the wrong item. You are not creating a network.. so click options.
4. Click add to existing network.
5. Make sure you then get the right network.. this is from my main router.
6. The utility will then use join. Fix the name to short, no spaces and pure alphanumeric .. for better networking.
7. The utility should complete the setup.. and you will probably need to fix a few things.. passwords or other errors fix them all up.
8. You can now click edit and go the wireless tab and see the details.
This will give you extremely slow speeds.. it is highly NOT recommended.

Similar Messages

How do I connect my time capsule with a Lynksis wi fi netwotk?

How do I connect my time capsule with a Lynksis wi fi netwotk?

You cannot extend or repeat a non-apple router in an apple router..
You must plug it in via ethernet and then setup roaming network (or if you like a completely separate network.. makes no difference from the TC point of view). TC is in bridge mode. That is router bridge not wireless bridge.. I gave the info on the other thread you are running.. very confusing when you ask in multiple threads.

How do you replace a time capsule with a newer one

How do you replace a time capsule with a newer one?

LOL.. pull the old one out.. put the new one in. Setup the new one.. do not copy setting from the old one.. it is better to start over and never copy configuration files.. although you might get away with it.
Plug the old TC into the new one.. change it to bridge mode.
You can then access and copy old backups to the new TC if you want. Although IMHO just keep the old TC for 6months. .then wipe it and sell it or use in different role. Do start clean fresh backups on the new TC.
If that is all useless. ask the specific question and we can try for a specific answer.

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling?

How do I setup my Time Capsule (3rd Generation) to be accessed from the internet while I'm traveling? It is installed on my home network behind my TWC broadband router.

Ok.. since the TWC modem is also a router.. all configuration takes place on this box.. NONE whatsoever takes place on the TC.
There is no airport utility 7.7.3 but there is a firmware of that number for the latest AC model TC..
Is it tall like this.
Then it is Gen5.
otherwise it will have a firmware.. 7.6.4 or earlier and the airport utility must be 6.3 or earlier.
Open the Airport utility and give us a screenshot of the summary page.
That will also help us determine that you have the TC, which version and how it is setup.
You might want to press the edit and also give us the Internet and Network tab as they should be set correctly as well.
I have created a DDNS through DYN.com although I am not sure how to implement this into the TC.
You do not do anything in the TC.. set it up in the Ubee router.
Port forward 548 to the TC in the Ubee router.
And make sure the TC has a static IP in the Ubee router.
Overall if you find this too hard I strongly recommend you buy a product designed for remote access .. eg WD MyCloud.. they are cheap and easy peasy to setup for remote access.. by PC or Mac and since it is built outside of Apple you not bound up in Apple limitations built into all their equipment to prevent you using it the way you want.. rather than apple want you too.. eg BTMM and iCloud being the only way apple provide for access to the TC and only when it is the main router of the network.
You are fighting hard because Apple made this hard.. not easy.

How can I use my time capsule with windows7

How can I use my time capsule with windows7?

This is asked regularly.
https://discussions.apple.com/message/10978060#10978060
Look at the more like this. On the right column next to the post.
Load airport utility for windows.. which will also load bonjour for windows.
In windows explorer type \\TCname or \\TCipaddress (replacing with the actual values.. names with spaces will give you trouble so change all names in the TC to SMB compatible or actual ip address).

How I can configure my Time Capsule with my mobile me?

Someone know how i can configure my Time Capsule with my mobile me?... Because i need access to my documents remotely, from any place where I find...
(sorry my bad english)

I think you're referring to the Back To My Mac feature?
Follow these three articles. Most important are the second and third.
http://www.apple.com/mobileme/features/mac.html
http://support.apple.com/kb/ht1109
http://support.apple.com/kb/HT3486

How do I access my time capsule over the internet

How do I access my time capsule over the internet. I've already set it up to share over WAN, but I have ATT so my TC is connected to the router provided by ATT can I still access my TC via the internet even though its not directly connected to the Ethernet?

The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
Google search this.. there is huge number of resources available. eg
http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house). How do I connect my Time Capsule to the Internet via the mobile WiFi?

I don't have a DSL or cable modem to access the Internet ... just a mobile WiFi (there is no cable available at our house and the mobile WiFi is our only option). How do I connect my Time Capsule to the Internet via the mobile WiFi?

LOL!!
I am in Australia and the ISP... I think both the main ones would fit your description to a T.. big T in particular.
Your router is really unsuitable.. if it is only wireless and no ethernet.. just buy an ethernet one.
Do a search on ebay.. 3g router.
But you can get the TC to join a wireless network.
It is a non-standard setup that Apple will not support.. the option is hidden.
If you are on Lion download the 5.6 utility. Go to the wireless set up page and hold down the option key whilst selecting wireless mode.. a new option, join will appear. You can then put in the ssid and passkey of the 3g router.
But please note the end result of this setup..
very slow speed. The TC is now a second wireless hop from your clients.. this will halve the speed.
In this mode the ethernet are deactived.. for reasons only Apple know, they decided you should not use ethernet when doing this.

My situation is two separate buildings 100 feet apart. can time capsule provide wireless internet in both?

can time capsule provide wireless internet service between two homes 100 feet apart?

OK.. starting to get the picture..
You should have run ethernet between the two buildings not cable.
Does the cable for the second building start inside your house.. ie do you have a termination for cable or does the second building come in directly from the street.
If you have cable link between the two buildings you can buy ethernet to cable adapters.. plug one it at each end and simply extend by plugging it into the router on the main cable link.. simple and far superior to wireless.
Otherwise you need to work out what kind of budget you want to spend to do this..
You can buy professional or semi-pro stuff from companies like ubiquiti which are far superior to domestic wireless link.. or if you want to do it on the cheap figure out what is the min speed you can live with.
I can give you instructions for using a pair of old airport.. in WDS.. or new ones.. but the new ones will cost far more and no gain.. you can usually pick up the old discus ones for $10 on ebay and they work great.
But don't try to do it without a link.. ie a specific set of AP in one house plus repeater in the other. As anything you do without making a link will just fall down or become unreliable.
You must have a pair of matched items.. You want to do this with WDS.. and you want something with good range. If you want N wireless that is fine.. but buy a pair of N wireless routers that can do WDS with full WPA2 security. eg full N wireless edimax stuff is not bad. TP-Link also not bad.. but if you want to run airplay and bonjour etc.. anything apple network then stick to apple. You will find that non-apple wireless routers will often not work with apple specific protocols.. as they are just that.. non-specified.

Time Capsule Degrades Wireless Internet Connection: Help?

Time Capsule Degrades Wireless Internet Connection: I am in FL using Brighthouse Cable as my internet provider (15MG down). The internet connection speed is slower than a dial up connection when wirelessly connected to my network to my Time Capsule. When I remove the Time Capsule and replace it with Brighthouses Netgear router the internet speed are normal (fast). Additionally, the internet speed is OK when I first hit a website, but the speed degrades rapidly as I access additional web pages. I no longer use my Time Capsule and therefore are not getting my back-up protection. (NOTE: I tried Verizon Fios and had the same problem.) Can anyone help?

Bought the time capsule in Oct 2013. I have a Sagemcom 2864 modem from Bell but used through Teksavvy. The 5 ghz has been flaky until I upgraded to Yosemite 10.10.1 I think. I had a closer look at it and it appears that the wifi is ok. I was thrown off by the wifi symbol being all animated in the menu bar. I was able to ping the time capsule via wifi. All the status lights on the modem looked ok. Next time it happens, I'll see if I can get some more details. Do you know if there's anyway to get some logs from the airport utility?

How to setup apple time capsule with FIOSinternet and VZ router?)

Hello,
I have Apple time capsule and the VZ Router MI424WR. I current set up:
1. VZ router - wireless off, the rest is standard
2. Time capsule: Wireless on in Bridge mode
Result: Internet works but the wireless network is very in-stable. Airtunes is nearly not usable.
I searched in the Internet and there was several comments that is is not a good combination. Therefore it is recommended to convert the VZ router in a modem mode and use only the Time capsule as the router. I tried this several times I do not get it to work. I followed this procedure (http://data.agaric.com/node/2160) but then I need the PPPoE Account number and password. But there do I get this? The Verizon support was not really helpful.
Please, is there a good and complete description to solve that issue?
Thanks in advance
Moebius

Go back to your first setup ...
Verizon router with wireless turned off
Apple Time Casule with wireless turned on
Method 1:
With the Time Capsule in "Bridge Mode", if I remember correctly, you should connect the WAN port to one of the open ports on the Verizon router (I believe bridge mode also turns off the DHCP server on the Time Capsule, if not, find that and turn if off as well).   Change the addressing mode for the Time Capsule to "static" and assign it an address on the LAN which is not in use (choose something you know is out of the way but on the LAN -- I suggest 192.168.1.180 to start -- you can change it once you get everything working).
If it doesn't work this way for you, move the cable from the WAN port on the Time Capsule to Port 1 and try again.
Method 2:
This results in a router behind a router setup, but unless you have devices connected directly to the Verizon router, it shouldn't be a problem.
With the Time Capsule disconnected from the Verizon router, turn on "Connection Sharing" (not bridge mode) and make sure DHCP is enabled on the Time Capsule. You need to change the address range being used by the Time Capsule (which I think defaults to 192.168.1.x to another network -- I suggest, 192.168.2.x with a netmask of 255.255.255.0 and give the router an address of 192.168.2.1 on the LAN side. Now, connection the WAN port to one of the Verizon router LAN ports. If you had anything connected to the Verizon LAN ports, move those over to the LAN ports on the Time Capsule and reboot them.
Method 3:
This is the least desirable of the scenarios because it relies on Verizon's crappy radio in their router (the Time Capsule has a much better radio and support 802.11n as well as b and g) whereas Verizon's only support b/g.    Go back to the configuration for Method 1, but also turn OFF wireless on the Time Capsule and turn on wireless on the Verizon router.   Try both bridge scenarios described -- using the WAN port first and if that didn't work, then moving the connection to port 1.
There is no scenario where you can place the Verizon router behind the Time Capsule -- since I believe Verizon is using all MoCA connections for the WAN side of their connection (you'd have to get Verizon to convert you to ethernet WAN and then they would not support you most likely for any STB issues with your FiOS if the Time Capsule was between the ONT and their router ... so don't even bother wasting time there ... more headaches than it would be worth.
If you're still not sure exactly what each configuration screen on the time capsule should say, post some screen snaps (or the configuration settings/choices which you are unsure about and someone will likely know the answer here).

How can I use my time capsule with Ethernet cable? How is it also possible to use time capsule as a normal external hard drive?

My problem is that I don't know how to use my Time Capsule with Ethernet Cable, as when I use wireless it is really slow.

Make sure that there is an Ethernet cable from one of the LAN <-> ports on your modem/wireless router to the WAN port on the Time Capsule
Click on the Wireless tab at the top of the page
Change the setting for Wireless Mode to Off (I assume that you do not want the Time Capsule to provide a wireless network since you already have a wireless network)
Next, click the Internet icon at the top of the screen, then click the Internet Connection tab
Connect Using = Ethernet
Connection Sharing = Off (Bridge Mode)
Click the Update button at the bottom and wait 30 seconds for the Time Capsule to restart and display a green light
Then, you must power off your entire network...all devices....in any order that you want
Wait a minute
Start your modem/router first and let it run a minute
Start the Time Capsule and let it run a minute
Keep starting devices one at a time until everything is powered up
If you are using Time Machine for backups, you will need to reset the connection because you have changed the way in which the Time Capsule connects to your network
Open System Preferences (gear icon) on the dock
Open Time Machine
Click Select Disk
Click the Time Capsule to highlight it
Click Use for Backup or, it might be Use Disk
Now you can connect your Mac using an Ethernet cable to one of the LAN <-> ports on the Time Capsule to back up using Ethernet. Be sure to turn off the wireless on your Mac before you start the backup.
If you want to backup using wireless, disconnect the Ethernet cable from the Mac to the Time Capsule and turn on the wireless and connect to your wireless network. Your computer will now backup using wireless.

How do I use my Time Capsule with hotel wired internet

How do I use my Time Capsule as a wireless router on my hotel free internet ethernet cable?

It may not be possible..
If they use a web access page, then there is no way you can set the TC to authenticate.. you must use the computer to authenticate and then use the computer to bridge to the TC for wireless clients to access.
Look up instructions on using ICS (internet connection sharing) in the Mac.
eg for 10.6.8 http://support.apple.com/kb/PH6589
eg http://support.apple.com/kb/PH10740
Of course if there is no login then you could just use it.. but I doubt you would be asking if it just worked.

How to set up Time Capsule with no internet or router wirelessly?

Hi, I would like to know if it is at all possible to setup a Time Capsule wireless without the use of Internet or a router altogether. I want to wireless set it up directly to a an Apple MacBook Pro.
Thank you.

If you decide to do this, the simplest way to accomplish your goal would be to download and install AirPort Utility 5.6 for Mac OS X Lion
Perform a Factory Default Reset on the Time Capsule to get it back to default settings using this Apple support document:
Resetting an AirPort Base Station or Time Capsule FAQ
Then open AirPort Utility 5.6 and click Continue to follow the guided setup to "Create a wireless network".
You will need to click "ignore" for messages that you see telling you that you do not have an Ethernet cable connected to the WAN port and also that you do not have an Internet connection.

How do i find my time capsule on the internet?

I use a time capsule (combo wireless router and external hard drive) but I cannot see it on the network. How do I make it visible? I would like to merge all my iPhoto libraries on that drive so I can view them from any computer or device and not have duplicates scattered across multiple hard drives.

The TC should be in bridge mode.. not setup to share over wan.. that will never work. That is assuming you haven't bridged the ATT router.
Once you bridge the TC see if you can setup BTMM using icloud settings in the TC. As per the Apple docos.. here.
You should also be able to directly access the TC since you have a router with dyndns client at a guess.. the setup is simply forward port 548 to the TC.
Google search this.. there is huge number of resources available. eg
http://useranswer.com/answer/how-can-i-access-my-time-capsule-remotely-with-iclo ud/

How do I setup my time capsule with wireless internet?

Similar Messages

Maybe you are looking for