How do I setup RFC if Solution Manager and Target system are in same server

Dear Experts,
How do I setup RFC if the Solution Manager and the Target System (SAP ERP 6.0) are sitting in the same server?
Do I really need to setup RFC?
regards,
Abraham

Hello,
An RFC is a Remote Function Call and is used to communicate between computer systems.
A system can be on a server. Multiple systems can be on a single server, a single system can exist on multiple servers.
When you setup the RFC Target it is the Host and not the system that is specified.
You can get the host information when logged into the ERP system by running transaction SM59.
This would then be the target Host in the RFC from Solman to the ERP system.
As Miguel suggested this is rather simple. So I hope this has shone a light for you so you may proceed.
But if you continue to have problems please advise.
Regards,
Paul

Similar Messages

  • Install SAP Solution Manager with DEV instance in the same server (MCOD)

    Hello, i would like to install SAP Solutions Manager together with DEV ECC 6.0 in the same host, DEV is currently installed and working fine.
    I followed note 551915 to convert MS-SQL 2005 to MCOD (change of schema from dbo to dev) and worked fine. But when i am installing the SolMan through the sapinst i don´t see the option MCOD
    The only option i am confussed is
    MS SQL Server
    Database reuse  o - New Database (DBSID = SAPSID)
                             o - Use Existing Database
                                    Database ID (DBSID)
    Witch option should i choose to perform a MCOD installation? new db or use existing db (DEV)?
    Kind Regards

    Hi Merchan, if you want to use MCOD you need to select the option: o - Use Existing Database
    Database ID (DBSID) .
    Regards,
    Darwin C.

  • Mismatch in system number on Solution manager and SMP

    Hi All,
    I found System Id is different in Solution manager and Service Market Place. But where as System number is same in Satellite system and Solution manager. Because system is not same we are unable to send he solution to SAP. Please suggest how to make system id same on SMP and both satellite system and solution manager.
    Regard's
    Sai

    HI,
    Some what similar to thread .. How to change the system no | SCN

  • Solution manager and logfiles

    Hi,
    I want to access the logfiles in solution manager.
    I hope that this logfile contain the messages of different satellite systems, execution of transactions in satellite systems and their inter communication.
    Is it possible to get the above information through log files ? any other alternatives ?
    Can anybody suggest me how can I access these log files.
    What configurations has to be made in solution manager and satellite systems ?
    Regards,
    ksap

    Hello,
    you can request it to SAP or you can download it from http://service.sap.com/swdc (Installations and Upgrades -> SAP Technology Components -> SAP SOLUTION MANAGER -> SAP SOLUTION MANAGER 4.0 -> ....)
    Regards
    Ermanno

  • How to setup CCMS with Solution Manager

    Hi, All
    My question is how to setup or satallite connection with Solution manager 4.0 for CCMS alerts
    Is that RFC connection using both sites, trusted and satellite system ?
    I would like to setup CCMS alerts through Solution manager and R/3 ccms
    please anyone has some guide or URL or any idea send me
    We are using SAP NW 2004 620 4.6C (SLD=DV,QA,PR) and solution manager 4.0
    Thanks in advanced
    J
    Edited by: issue2008 on Sep 19, 2008 12:13 PM

    you need to install CCMS agents(sapccm4x, sapccmsr) on satellite systems & configure them with the central system(solman).

  • How to install both solution manager and ECC Development on same server

    Hi All,
    Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
    Pls let me know.
    Regards,
    Karthik

    Hi Karthik,
    I try to answer you message, my answer may not be sufficient for you.
    Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
    Verify sizing of both systems.
    SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
    Best regards,
    Ruediger Stoecker

  • How to install both solution manager and ECC Development

    Hi All,
    Can anyone help me how to install Solution Manager and ECC Development on same server and also whether SLD is required? if yes, then how to setup.
    Pls let me know.
    Regards,
    Karthik

    Hi Karthik,
    I try to answer you message, my answer may not be sufficient for you.
    Install SAP Solution Manager and ECC development as separate systems sharing the same server. So each system will get it's own system id and installation number.
    Verify sizing of both systems.
    SLD is not mandatory for a SAP Solution Manager. If a SLD already exist in your System Landscape, you can connect SMSY (System Landscape) in transaction SMSY_SETUP with a SLD. Information on System will then be retrieved from SLD, rather via an RFC.
    Best regards,
    Ruediger Stoecker

  • ERROR while CREATING RFC FOR SOLUTION MANAGER DIAGNOSTICS

    Dear all,
    Hi,
    I am configuring solution manager 7.0.
    In SPRO>basic setting >operation>solution manager diagnostics > create RFC for solution manager diagnostics i am getting this error
    program WEBADMIN not registerred.
    can any one tell me how to register this program in sap gateway.
    best regards
    azeem

    Hi Azeem,
    Just before creating the rfc connection do this step.
    Set-Up Solution Manager Connection to Solution Manager Diagn
    Use
    Check the connection to function Solution Manager Diagnostics.
    Default Settings
    The function Solution Manager Diagnostics is installed on the Java instance of the Solution Manager system by default.
    Activities
    If the default values are correct, save the settings.
    To run the Solution Manager Diagnostics in another system, enter the required data and save.
    Also check that your java is active.
    Regards
    Ashok

  • How to monitor BI & PI using Solution Manager 4.0

    Hi, we have installed Netweaver 04S SR2 SP11 BI & PI components. We want to use Solution Manager 4.0 to setup monitoring for these 2 systems. Any guide or documentation will be greatly appreciated.
    Thanks in advance.
    Arshish

    Hi Arshish,
         To setup monitoring you will first have to include these systems in the system landscape of SAP solution Manager 4.0 in transaction SMSY.
    The steps in the order are :
    1. Create Server ( Server name ,IP and Fully qulaified Host name)
    2.Create Database  (Give the database you are using)
    3.Then you have to create the system itself. and give the information as required.You will be able to do it when you will go through it.
    Then you have to generate the RFC's from solution manager to satellite systems and back.These RFC's have to be trusted.Assign role SAP_S_RFCACL or profile S_RFCACL  to the users in SOLMAN as well as satellite system.
    Follow these steps and create a Logical component for the system that you have added.
    Follow these steps first.More information can be found out on
    service.sap.com\solutionmanager
    or you can look for the RKT'S on service marketplace.If you need any furthur assistance do reply back.
    please award points if found helpful
    Best Regards
    Amit

  • How to check the messages in solution manager?

    hai experts !
    how to check the messages in solution manager?
    in which transaction do we see them?

    Hi Kiran,
    From what I gather from your brief question, you are perhaps looking for CRM_DNO_MONITOR that would display all queries created from Satellite/SolMan system itself, as support messages.
    If you are looking for Notifications underlying those messages, please look for DNOTIFWL.
    For more specific answers, please provide more description of what you are looking for.
    Trust this helps.
    Regards,
    Srini

  • Error in RFC & to Solution Manager System

    Hi,
    Error in RFC & to Solution Manager System
    can anyone tells me why this error occurs???
    With regards
    kulwinder

    FYI
    We have just had same issue thaat in certain scenarios with RFC communication BACK to Solution Manager from Satellite system we got the error.  We resolved this by looking at the RFC user used in the BACK connection (i.e. SOLMAN<SID>) on the Solution Manager and changing the user type from communications.
    Hope this helps someone else, I spent ages digging around for an answer to such a simple fix
    Paul

  • How to download support packs from solution manager

    Hi Experts ,
    Please tel me the process for down loading support packages from solution manager.iam very new to this process
    How can get an approval in solution manager to down load support packages in step by step process
    Regards

    Please check: http://service.sap.com/solutionmanager -> SAP Solution Manager in Detail -> Maintenance Optimizer -> Links and Downloads.
    Kind regards,
    Mark

  • How to configuration Maintenance Optimizer in Solution Manager 4.0?

    Hi All,
    Can any tell me How to configuration Maintenance Optimizer in Solution Manager 4.0?
    If any one having the document for same then please give me.
    My mail id is : - <email address removed by moderator>
    Thanks a lot,
    Harshal

    Hello Harshal,
    Please go to service.sap.com/solutionmanager, click on the "maintenance optimizer" link, then a step-by-step guide is available there.
    Another document is attached in Note 990534.
    If you have further issues, Note 1024932 might be a good starting point.
    Best regards,
    Victor

  • Question about setup ewa in solution manager 4.0

    Hi
    I tried to setup ewa in solution manager 4.0, but when I clicked on the "setup EarlyWatch alert", it told me that:
    the Service is not available, Fehlercode:ICF-NF-http-c:000-u:SAPSYS-l:D-i:saptux04_SM4_04-v:0-s:403-r:Forbidden
    HTTP 403 - Forbidden
    any one can help me?
    best regards

    Hello,
    You will have to activate the service first in transaction SICF.
    SAP recommends to do so via the the SAP Solution Manager IMG following the respective IMG path:
    <i>SAP Solution Manager Implementation Guide -> SAP Solution Manager -> Confiugration -> Basic Settings -> Standard Configuration of Basis Settings -> Solution Manager -> Activate Solution Manager Services</i>
    Enhanced configuration of SAP EarlyWatch Alert (Service: /sap/bc/webdynpro/sap/dswp_rating_4_monitoring)
    This application is fairly new and contained in SAP Solution Manager 4.0 SP12 onwards. Information on the respective functionality can be found right here in the SAP Solution Manager SP News:
    http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000538663&_SCENARIO=01100035870000000202&_OBJECT=011000358700000478802007E
    I hope this helps to solve your issue.
    Regards,
    Doreen

  • How to create a "blueprint" using solution manager?!!

    I have been asked to create a 'blueprint" using solution manager!! I have absolutely no clue how this can be achieved using solution manager!! Please guide me on what is to be done.Would appreciate if you donot give me links of help.sap as the same is not making sense to me.
    I have to create a blueprint for 20 countries of SAP reports available for FICO. Some of these reports are country specific while others are generic.

    Hi Suchita,
         You can create blueprint document using SOLAR01 transcation, provided you must have included all the organizational data, business process, master data,,
    Follow the path
    transaction SOLAR01->Business Blueprint-> Generate Blueprint
    You must have created a solution and a project assigned to that solution also.
    further clarifications feel to post the query
    regards
    Naveen
    Edited by: Naveen kumar Palanichamy on Jan 2, 2008 7:16 AM

Maybe you are looking for

  • Replace a string single quote(') with underscore(_)

    I have more than 100 tables in a schema. I have to find out if a string has a single quote in the column and replace it with an underscore. I have 2 columns CREATE_USER and UPDATE_USER in all the tables. Now i want to update the values if the string

  • How can I insert in the table detail of a master/detail form??

    Hello, I have created a master/detail form from the assistant, and with the code generated by APEX I do not manage to insert a row in the table detail, I press the button 'Add Row' and refill information, when I press the button ' to apply changes '

  • Hi by mistake i deleted my viber messages how to get them back

    Hello i deleted my messages by mistake ...is there any way that i get my messages back thankyou

  • Upload Amounts in Profit Center per Period

    Hi all, I want to upload amounts in profit centers for different periods, same as in transaction 7KE1. I found 2 FMs when debugging this transaction, but I'm not sure about them. 1) PCA_PLANDATA_POST 2) PCA_ACTUALS_POST I wanna know if those FMs can

  • Can't associate EA6500 to my Smart Wifi account

    Hi, I have a problem with my EA6500 router. I can't connect to the internet, the connexion works fine. But, everytime i go on the smart wifi login page, i enter my login and password and then i'm asked to download the software for my EA6500 and to as