How do I shape pictures as in the Bebop template?

How do I shape pictures as in the Bebop template? They are not using the shapes. But if you click edit mask, you get red points on the corners and can move and change the shapes. I want to do this with others. Any body know how?

As far as I could determine, the irregular shapes are not available from the menu anymore.
Copy/paste an existing one and drop an image on it.

Similar Messages

  • How to call a function module from the Web Template?

    Hi all,
    how can I call a function module from a BI 7.x web template and then show the result of the FM on the web template?
    Many thanks for your hints.
    Regards, Nils

    Hi!
    I am too working on a similar issue.
    Probably this helps:
    Re: Calling a function module from a Web Template
    Regards,
    Sri

  • How can I insert a parameter to the layout template?

    How can I insert a parameter defined in report to the layout template? just like insert a field. I wanna display the parameter in the output.

    If its Ebiz, concurrent program.
    Put this in your template in the starting,
    where the P_BUSINESS_GROUP_ID is one of the concurrent program parameters,
    <?param@begin:P_BUSINESS_GROUP_ID?>
    and then you can access the parameter in your rtf like <?$P_BUSINESS_GROUP_ID?>
    Upload the rtf template back into apps.
    and then rerun the conc pgm :)

  • How to change appraiser / reviewer after creating the appraisal template

    Hi All,
    Once the Appraisal template created, if we have changes in appraiser / reviewer, how we can change the new names in the appraisal template in standard (other than T.Code: Phap_admin --> Change header data).
    For eg., we have created a document for PERNR 1 on Apr 1st for 01.04.2014 to 31.03.2015 with appraiser as Mr. XYZ, on 01.05.2014 Mr. XYZ left and Mr. PQR replaced that position. In this case, how we can replace appraiser name for PERNR 1 as Mr. PQR in the appraisal template.
    Please suggest.
    Regards,
    Venkat Nagam

    Koushik,
    Depending on the amount of customizations that you did, it may be easier to use the wizard to re-create the master-detail form & report.
    If you still want to give it a go:
    Assuming that you created the 2-page Master Detail report & form:
    On the first page, you will have to chage the SQL to reflect the new table name. Once you do that, you'll have to re-create the link on the EMPID column.
    On the second page, you'll need to do some more work. You'll have to change both Page Rendering Processes: Fetch Row from EMP and Get Next or Previous Primary Key. You'll then need to change the Page Processing Process: Process Row of EMP. Also, ensure that you have a proper Foreign Key relationship between EMP2 and DEPT (or your detail table).
    Thanks,
    - Scott -

  • How to implement custom lov button without the standard template.fmb?

    hello,
    i am developing a application using oracle forms 10g. i can't use the standard template.fmb because my application does not run in ebs. there comes the problem: i want to implement the lov button function like the template does, such as :
    1. when the text item get focus, lov button display.
    2. when the text item lost focus, lov button disappear.
    3. when scrollbar scrolls, the position of lov button adjust accordingly.
    4. there is only one lov button in one form and the lov button was created dynamicly.
    i found it's so complex to do this.
    anyone can help?

    Try to change the following setting to true
    app.ui.lovButtons=falsein $ORACLE_HOME\forms\java\oracle\forms\registry\registry.dat

  • How to insert application form id into the form template

    Hi,
    Is there a way to set the application form id into a form template designed from the LiveCycle Designer? Here is the detail description of my question:
    (1) I am using LiveCycle Design to design a form template.
    (2) I go to our application to deploy this form template. During the process, a form id will be generated and it will be associated with this form template.
    (3) I would like to insert this generated form id into the form template, so that later when user fills out and submits the form, I will know what's the form id the submitted data belongs to.
    Appreciate you kind help!!!

    Hi Justin,
    Yes. The form ID will be generated by our application during the form deployment process (after the form is designed, it needs to be deployed to our application before it can be used.). So I was hoping there is a way to set the form ID into the form template design at that point. So that later when end user fills out and submits this form, I will know what form ID it is related to.
    If I cannot do this at the deployment point, one way I can think of is to do it at the time when end user is downloading the form. I can return a "rendered" form (instead of opening up the form template directly) with the form ID information in it. But that means for every single form user opened we need to render it at run time to fill in the form ID, which is not performing and what I was trying to avoid.
    Thanks for your help!
    Anita

  • After rotobrush, how to make background picture appear in the video when exporting it to PremierePro

    I seem to have problems saving/using it with premiere pro. it's a 10 second video of myself with 3 pics: 2 that I put in front of the video and one as a background. In after effects, in the bottom left corner box, the 2 pics are above the video file and the background picture is below it. Still in after effects, the background pic is there behind me and the 2 other pictures are in front of my video which is where everything should be, great. When i save it, then export it to premiere pro, the 2 pics in front are there but not the background pic, the background is just my full video as if I didn't rotobrush it.  Help??
    Also, how can i export the project as a file in Avi, mpeg, mp4...?
    Thanks in advance

    Hello Mylenium, i do apologize about my ambiguous question. I'm starting to learn how to use it and in some way, i didn't even know what i was talking about myself. But thanks to your help, i now got it.
    "When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences. Keyframes, effects, and other properties are converted in the same way as when you paste an After Effects layer into an Adobe Premiere Pro sequence."
    so as it says above, it only uses the initial video. What i did was only render using the rotobrush and i didn't "render queue" the whole project afterwards simply because i didn't know i had to do that. I thought rendering it from rotobrushing it and adding the background effects would be enough.
    Again, thank you. and i also learned how to save it in different format, since AVI outputs a huge file size.

  • When i cropped a picture using the crop tool to 9x6" when it was printed everyone was stretched looking tall and thiner how can i crop pictures but keep the people looking as they do in real life?

    oops put the while question in the wrong place!!!  but I'm at a loss on how to do this every picture I took everyone looks stretched when I use the crop tool any help would be much appreciated,
    I have PS6
    thank you

    suzukidi wrote:
    I have been trying so hard to try and get my head round this since your last comment so what I think I know is with my Nikon d80 having 3:2 aspect ratio pictures that I wanted printed can only be the sizes you mentioned above which is fine as the pictures I got printed were 9x6" but it's from now I'm still bit lost when I use the crop tool and pre set the size to 9x6" with a resolution of 240 and crop out all the bits I don't want it comes back from printers stretched so i'm still lost as I don't know the  point where I'm doing something that causes the stretching? thank you for your patience
    Lets separate this into topics  Aspect Ratio,  resolution and size ... etc
    Aspect  Ratio is just the ratio of an image's two sides.    Your camera captures an image with a 3:2 Aspect Ratio.   If you want to print the whole image your camera captures it can be printed and image size that has sides the have a 3:2 ratio without distorting the image.
    Images are re-sized two ways:
    One way is to keep the pixels your camera captures and print them at different resolutions. Resolution is nothing more then pixel size.  Pixels have no size till there is a resolution set. Pixels themselves may have a aspect ratio themselves.  These days most devices use square pixel.  Some video standards use non square pixels. So if you have square pixels and an image with 1800px by 1200px and set the resolution to 300DPI the print size will be 6" by 4"  if you set the  to 200DPI the print size will be 9" by 6".  Its simple math. 300DPI means pixels are 1/300"x1/300" there are 90,000px/inch 200DPI 1/200"x1/200" 40,000px/inch  100DPI 1/100"x1/100" 10,000. Note how quickly the pixel count climes as resolution increase doubling an image resolution requires four times as many pixels not two timas as many.
    The other way is to create a new image using the pixels you camera captures.  Your Camera pixels are resampled(interpolated) into a totally new image not a single camera captured pixel remains intact the new image has a different numbers of pixels it a different image.  There are different interpolation methods some work better then others depending on image content and the direction of the re-size.  Any time you resample an image you loose some image quality.  The pixels are generated they are not captured using optics and a sensor.
    Normally I do not resample when printing I just set the DPI so the image prints the size I want.  In the Image size Dialog I un-check resample and the set the print width or height I want to print.  Photoshop will calculate the DPI and set the other side size.    If you crop without setting a DPI resolution in the crop tool the crop tool will not resample the crop to a particular DPI it should just set the appropriate DPI.
    I resample image for the web Cameras capture more pixels then can be display by displays.  So in the image size dialog I check resample and constrain the width and height to the image current aspect ratio then I set the number of pixels I want the width or height to be. Photoshop will calculate the number of pixels the other side will be. The DPI is meaningless for web images for Web images are displayed on screens at the resolution a displays has.  Your images will display large on a large Low DPI resolution HDTV screen and small on a high resolution cell phone display.
    If you want to print you image a size that does not have a 3:2 aspect ratio without distortion  you need to crop you image to the aspect ratio you want to print at.  You need to discard part of your image.  The Crop Tool does not distort it discards part of you image.  It may or may not resample the crop selected.  I do not use the crop tool but if I did I would not use it to resample the crop I would not set in a DPI resolution in the crop tool.
    Photoshop can also resize an image from one aspect ratio to and other aspect ratio a non constrained resize.  The resulting image will be distorted.  However Photoshop does have have a content aware re-size that tries to maintain recognizable objects perspective during the distortion process.  This process can also be aided by user masking.
    Cropping:
    A 3:2 aspect ratio image can in theory be cropped to an infinite number of smaller images that have any aspect ratios including an infinite number of images that have a 3:2 aspect ratio.  All crops can be resampled to a particular DPI resolution. However digital pixels can not be sliced up so there are a finite numbers of crops you can hack form a digital image

  • How can I take pictures n videos  the same as  the screen?

    How can I make my pictures n videos come
    Out as big as the screen?

    but the problem is Can we make sure the string we get
    from table.getValueAt(r,c).toString
    is the same as the string show on the JTable UI.That probably depends on the TableCellRenderer that is asked to render that particular column. I would assume that the default behavior is what you want, i.e. that the renderer uses toString() on the Object.

  • How to extract any picture (frame) from the video file

    I am writing an application that is going to show the grid of tiles. Each tile should have picture that is frame from some particular video.
    Basically something similar to Photos or Videos - standard Windows Phone app.
    The question is how can i extract any picture from the video to put it as picture of the tile or button?

    I pinged you offline.
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • HT201302 My phone uploaded ALL my pictures from my PC  how do I delete pictures not in the photo stream or camera roll?

    My ios4 uploaded ALL my pictures from my PC, and they aren't in the photo stream or camera roll and I cannot delete them from phone.  Anyone have an idea how I can do that?  Driving me nuts! Thank you!

    If the pictures are synced to the device from iTunes, the only way to remove them is via iTunes.
    Either delete the pictures from the folder selected to sync or stop syncing that folder.
    Why are you incapable of doing this or what about it did not work?
    If help is desired stop being vague in the responses.

  • HT201104 how to access my pictures stored in the cloud on my pc after i have downloaded and installed icloud

    I can't access my over 2,000 photos stored in the cloud on my pc.  I have downloaded icloud for pc. how do I access my pics, I am paying for extra storage

    I spent 40 minutes on the phone yesterday with applecare support trying to get icloud and idrive and iphoto to work on my pc without any success.
    i was cut off and then waited for another 27 minutes to speak with a ''product specialist'' after i called back (apple didn't call me) until i couldn't wait any longer.
    i tried again today and after waiting 53 minutes to speak with a ''product specialist'' i still havent had any success. after 25 minutes they cut me off but called me back and now ive been on hold for 14 minutes waiting to speak with the complaints team.
    my next step is the nsw office of fair trade as the apple website clearly states icloud can be easily installed on a pc and that photos can be accessed from there.
    very disappointing, especially after purchasing extra storage as you did.
    joanne

  • I need to know how to get a picture out of the iphone email

    i guess im a retard but i cant figure it out and i need to get this pic so i need help how do i get it off my iphone email thing

    Page 50, iphone manual:
    "Save a photo attachment to your Camera Roll album: Press and hold the image, then
    tap “Save Image.” "
    http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf

  • How to resize a picture and preserve the ratio ?

    I don't want to fit the image to control, nor fit the control to image.
    George Zou
    http://webspace.webring.com/people/og/gtoolbox
    Solved!
    Go to Solution.

    may be this thread is useful?

  • How to get Bursting file to use the same template as selected by user

    I have created an XML publisher bursting control file for a standard Oracle report Direct Debit letter.
    The user wants to be able to select from a number of different letter templates which is ok except that the bursting control file is fixed to use one template.
    How can I get the bursting control file to use the same letter template as selected by the user when running the report ?
    I am using XML Publisher 5.6.3 with bursting patch.

    Try these following, which come to my mind now as of now.
    In the bursting file, you can do the filtering and apply different template..
    <xapi:template type="rtf" location="/usr/template1" filter=".//DIRECT_DEBIT[./parameter_or_element='first_template']"></xapi:template>
    <xapi:template type="rtf" location="/usr/template2" filter=".//DIRECT_DEBIT[./parameter_or_element='second_template']"></xapi:template>
    second option..
    you can replace the element from the xml in the bursting control file.
    ${ELEMENT_NAME}
    can be used in the template name i guess..
    <xapi:template type="rtf" locale=""
    location="xdo://AR.${SHORT_NAME}.en.US/?getSource=true" translation="" filter="">
    </xapi:template>
    But in this short name has to be in XML file...
    I haven;t tried it...wil try it wheni get time..

Maybe you are looking for