How do I share an iMovie file for use on 1st or 2nd generation Apple TV

How do I share an finished imovie file for use on 1st or 2nd generation apple TV?

I shared my finished movie in I Tunes but it doesnt show up on my Gen 1 apple tv or my gen 2 Apple TV. The sharing process indicates that the movie is compatable with gen 3 Apple TV.
Carl

Similar Messages

  • HT1498 How did I know if I have a 1st or 2nd generation Apple TV

    How do I know if i have a 1st or 2nd generation Apple TV?

    Welcome to the Apple Community.
    The Apple TV 1 is larger and grey/silver
    The Apple TV 2 is smaller and black

  • How do I set up a guest account using the AirPort Express  2nd Generation?

    I Just purchased a new 2nd Generation AirPort Express.  The features list and the set-up guide says that I should be able to set up a guest account, but nowhere have I found how to do this.  I am running AirPort Utility 5.6 on my MacBook Air under Lion and I even get a message that I should not make updates using version 5.6 because it is not the appropriate version for the 2nd generation AirPort Express. Software Update says there's nothing new for me. When I search the Apple support site there is not even a version of AirPort Utility 5.6.1 for Lion though there is one for Snow Leopard.  Even when I installed that version on my Mac Mini running Snow Leopard, I could see no way to create a guest account.
    I came across a YouTube video describing a demonstrating how to set up the guest account on Time Capsule and the AirPort Exteme. There it's quite obvious because in the General section there is a tab for setting up the guest account.  There is no such tab in either version 5.6 of the AirPort Utility I'm running under Lion or version 5.6.1 running under Snow Leopard.
    What am I missing?
    -Bill

    Apple assumes that you are connecting the AirPort Express to a simple modem....not a modem/router or gateway type of device......that provides both modem and router functions in one enclosure.
    If you have the AirPort Express connected to a gateway device, the Express is detecting that another router is present on the network, so the Express operates in Bridge Mode to prevent the conflicts that would normally occur when two routers are on the same network.
    Open AirPort Utility 5.6, select the AirPort Express and click Manual Setup
    Click the Internet icon, then click the Internet Connection tab
    If the Connection Sharing setting is currently configured to "Off (Bridge Mode)", the Guest Network cannot be enabled with the type of "modem" that you have without breaking some basic networking rules.

  • How do I convert Word 2004 files for use with Mavericks?

    I have recently upgraded to Mavericks and now find that my old Word files (2004) can't be opened. (I can still open my Word 2008 files.) I have been a maths teacher for decades and have many old files which are still very useful but they contain more than just text; they contain diagrams, MathType expressions etc. etc. I need to be able to convert these files to files that can be opened with Mavericks. Can anyone tell me how I can do this?

    Helen M. K. wrote:
    I am still using Office 2008! (I know I should have upgraded but haven't yet.)
    Office 2008 should function in Mavericks and it willl open Office 2004 files:
    http://roaringapps.com/app/microsoft-office-2008
    Hence, you do not need to partition and install Snow Leopard into a new partition.  I gave you my previous advice before you indicated you are now using Office 2008.
    Helen M. K. wrote:
    I am still using Office 2008! (I know I should have upgraded but haven't yet.)

  • How can i convert an excel file for use in an ipad mini?

    I have 3 or 4 Excel files on my PC that I would like to keep for reference on my iPad Mini.  I would have to update the files on a weekly basis.  What's the best solution for this?
    Thank you.

    go to the app store on the ipad and in the search area type in Excel and you will get several apps that will alow you to do this

  • How to declare variable in solution file for use in project files.

    Hi Folks,
    Apologies if this is not the right place to ask, but I would like to declare a variable in my solution file that can used by all of the projects (prof files) in that solution.
    More specifically in the project files, references are stored using relative paths which cause issues if they don't exist. I would like to replace the relative paths with a variable set in the solution file that can easily be changed when the solution is
    built in a different location.
    So I would like to replace "../../../SomeProject"  with "$(SomeLocation)/SomeProject"  but set the $(SomeLocation) in the solution file.
    Regards
    Andy

    Hello Andy,
    Here is a common sln file:
    Microsoft Visual Studio Solution File, Format Version 12.00
    # Visual Studio 2013
    VisualStudioVersion = 12.0.30723.0
    MinimumVisualStudioVersion = 10.0.40219.1
    Project("{FAE04EC0-301F-11D3-BF4B-00C04F79EFBC}") = "wpf_EntityFramework", "wpf_EntityFramework\wpf_EntityFramework.csproj", "{A282940A-5F76-4FF8-9568-8B7D14133259}"
    EndProject
    Global
    GlobalSection(SolutionConfigurationPlatforms) = preSolution
    Debug|Any CPU = Debug|Any CPU
    Release|Any CPU = Release|Any CPU
    EndGlobalSection
    GlobalSection(ProjectConfigurationPlatforms) = postSolution
    {A282940A-5F76-4FF8-9568-8B7D14133259}.Debug|Any CPU.ActiveCfg = Debug|Any CPU
    {A282940A-5F76-4FF8-9568-8B7D14133259}.Debug|Any CPU.Build.0 = Debug|Any CPU
    {A282940A-5F76-4FF8-9568-8B7D14133259}.Release|Any CPU.ActiveCfg = Release|Any CPU
    {A282940A-5F76-4FF8-9568-8B7D14133259}.Release|Any CPU.Build.0 = Release|Any CPU
    EndGlobalSection
    GlobalSection(SolutionProperties) = preSolution
    HideSolutionNode = FALSE
    EndGlobalSection
    EndGlobal
    And the Global Interface in the solution file is actually used for Visual Stuido add-ins. To know details, please read the following MSDN article:
    1. Persisting Information in Projects and Solutions
    Here you can find "If the Globals object is associated with the
    Solution2 object, then the value persists in the .sln file. These values are persisted when the solution file is saved."
    2.
    Solution2 Interface
    It's about the solution interface.
    As you can see although they may save something to your solution file, it is not intended for you to use it in your project.
    What's your projec type and can you alter to use some common ways?
    For example:
    1. If it is in project level, set your value public so that all classes can access the value.
    2. Or you can choose to create a xml/text file or any file that you can read by code, and then read the value out from that file.
    It will be much better than thinking about set value in the solution file.
    Best regards,
    Barry
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How do I import an AVI file for use with FInal Cut Express

    How do I import or use an AVI file with Final Cut Express?
    Thank you. Do I need to convert my AVI file and what is the
    easiest way to do that? Thank you.

    You should convert the media to QuickTime. Without knowing any specifics most likely the simplest way is to use MPEG Streamclip.

  • How to resize logo in AI file for use on web page? [was: new with  this program]

    Hola , i got my logo and the online company  sent it in low resolution, I asked for the proper resolution for my web page and the company sent me this :
    The AI (Vector) file(s) in the zip file are to be utilized for all high-res.
    and commercial printing applications.  It is an Adobe Illustrator file and
    can only be opened and/or utilized if you have this professional design
    software.  All commercial printers will have access to utilize these files.
    I got the adobe illustrator and I am trying to fix the logo and just can not get the size , any tip will be apprecite !

    the company is giving you the vector (master) file that you can make use for web (RGB) or print (CMYK)..
    logo for web, there are 2 points in here:
    the size
    1st. check the artwork's unit → (menu) File → Document Setup → Units → Pixels (as for web)
    then resize / scale the artwork to your size needed - you can also use Width & Height value in Transform palette
    the resolution (you asked for)
    Ai is not like photoshop that you need to change the dpi, because the artwork is vector format ('resolution free')..
    only while exporting (saving to raster) there will be dpi selection:
    (menu) File → Export → Save as type (PNG / JPG) → Save → PNG or JPG Options → Resolution

  • How to quickly combine 2GB QT files for use in FCP Multiclip?

    We have 3 Focus FS-4 Pro 80GB HD units that work with 3 Sony DVCAM camcorders. We edit on FCP 5 and 6 on Quad G5s and one Intel G5 with Mac OS 10.4.11 and 10.5. We work in DV primarily.
    Recently, we began to do a large number of multi-cam programs which need multiclip editing on FCP. Being FAT 32, the FS-4 breaks the QuickTime DV files into 2GB chunks. This poses an editing problem. At the present time, after importing all the 2GB files to the computer/FCP, we have to stitch them together in the FCP timeline, export the resulting timeline into a single QT movie and reimport that into FCP for multiclip editing. This takes OVER HALF THE TIME it would take to digitize the three tapes(using a one hour 3-cam show as an example).
    Is there a solution? A speedy Mac utility that combines the 2GB Quicktime files into one large file? Or some other workflow that we have missed?
    I may write to Focus to see if the drive could be reformatted into NTSF without losing a lot of functionality. Have not done this yet. Don’t expect a positive answer. Know they have an FS-5 with 90min clips, but can't replace the FS-4s yet.
    Any help will be very appreciated as we are bogged down with this now.

    If I might offer a little bit of a different perspective.
    Having worked a number times with multi-clips and lots of footage (3 day long one on one interviews as an example) There really isn't any need to concatenate all of the footage from one camera into a single clip. I have never stayed on any clip for 5 minutes (~2GB of DVCPro HD 720/30p).
    The process of the edit just doesn't demand that you work with all the footage at once. Work with the segments you have and then move on to the next. I would assume at some point your going to pull shots from some other time in the shoot to fix a reaction or a camera error as well as any number of other things editing requires, don't get caught up in the tech and end up making more work and files.
    o| TonyTony |o

  • How do you convert .AVI files for using in iMovie without losing the original clip time and date

    Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
    paul

    Hi everyone! does anyone know how to convert .AVI files for using in iMovie without losing the original clip time and date? Handbrake, MPEG Streamclip and Evon all replace the original timecode with the date of modification. This is very frustrating when you are trying to keep the chronology right. I know that if you upload the files to iMovie from one device the chronology isn't a problem, but I'm adding video files from a couple of iPhones and a couple of camcorders. any help much appeciated.
    paul

  • How do I import an iMove file into Toast 7?

    How do I import an iMovie file into Toast 7? I have tried
    the image file copy and the horizontal
    aliasing still is there.

    I am not quite sure what you are trying to do since you mention copying an image file. Let's start with an iMovie project and you now want to encode it. You have a choice of programs to do the encoding, Toast being one of them. If the video is less than 2 hours, iDVD offers more options and does a great job encoding the movie too. I use both programs. If this is the process you are trying to follow, then Toast 7 allows you to drag the iMovie project file directly into the Toast window (after selecting the Video tab)and it will locate the right file to encode. Set the various options for menus, etc. and then go. Usually, it is best to Save As Disc Image, and then burn the DVDs later from the image file again with Toast using the Copy tab (copy image file selection). If I create the image file with iDVD, I still use Toast to burn the DVDs. Toast 7 works great with iMovie 5, but I have not used it with iMovie 6. There could be some incompatibilities.

  • How do you share an iMovie project to DVD now that iDVD not available

    How do you share an iMovie project to DVD now that IDVD not available on iMAC? Thanks.

    Hi
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on Internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and Blu-Ray but without the nice themes.
    Yours Bengt W

  • How can I convert an .m1v file for my MacBook to be able to play it?

    Hi!
    How can I convert an .m1v file for my MacBook to be able to play it?
    I tried numerous apps from the app store, but they failed
    Thanks!

    Hello:
    Rather than try to buy a box, I suggest you take the computer to a FedEx or UPS store.  They will wrap and safely package the device for a reasonable cost (I have shipped two iMacs this way).
    Barry

  • ___ How do I convert an Ai logo to a .dst file for use in embroidery?

    ___ How do I convert an Ai logo to a .dst file for use in embroidery?
    Is there an easy way?
    Thanks,
    Hugh

    Like so perhaps:
    http://www.embroideryi2.com/adobe
    Took 5 seconds to search on Google.
    Mylenium

  • How do I share a large file between accounts on my imac

    How do I share a large file between accounts on my imac?

    Put the file in a folder that both users have access to, such as /Users/Shared or one user's Public folder. You may also need to change its permission settings in the Finder Info window.

Maybe you are looking for