How do I shorten the length of the timeline in Adobe Premiere Pro?

This is my first time using Adobe Premiere Pro. I created a slideshow of images with music. The entire length with all of the images ends up being around 40 minutes. The length of the entire timeline is over 10 hours. I had finished my slideshow and exported it in a .mov format. The exported file ended up being a 10 hour long video with the first 40 minutes being the actual slideshow and the rest of it was blank. That file ended up being about 140 GB in size. All that I want to do is to cut off the rest of the time after the first 40 minutes. PLEASE HELP!!!!

Set In and Out Points or the Work Area Bar to the Head and Tail of your edit.
The when you Export..use either of those as a setting to tell the exporter what to export. There is a Menu for it in AME.

Similar Messages

I have premiere pro cc and i can't put the speech analysis models spanish for adobe premiere pro cc

I have Premiere Pro CC and I can't put the Speech Analysis Models Spanish for Adobe Premiere Pro CC, they're installing on the folder CS6 and when I try to analyze it only appears on english... If anybody can help me

the messsage is for forum housekeeping and is not a message directed to you.

How to export H.264 in a .MOV container in Adobe Premiere Pro CC 2014?

Hi!
I'm editing video on a regular basis, and the broadcasting network I'm working with is asking for an H.264 video in a .MOV file format. I'm using Adobe Premiere Pro CC 2014 and love it, but I cannot seem to find the option to export H.264 in a Quicktime video format. Additionally, they want the video in interlaced format, but there is no 720i option.
Assistance is greatly appreciated!

As the image to the right shows, I have no h.264 option.
Would HandBrake be a good way to encode in h.264 and export to .mov? I'd really like to do it directly from Premiere, but HandBrake is as good a solution as any...

How can I capture video on a dvd disc in Adobe Premiere Pro Cs5?

Hi! I'm an amateur, I'm trying to restore a video on a vhs tape into Premiere Pro Cs5. I have Pinnacle Studio Pro 14 software, Moviebox Plus USB hardware ,Sony dvd player, and a Panasonic vcr player. I captured the vhs video to Pinnacle Studio Pro 14 and burned it on a dvd. I connected the Moviebox Plus to my computer via usb, and connected the input and output to my Sony dvd player. I opened Premiere Pro Cs5 and went to file and clicked on capture. I push play on the dvd player and nothing happened in the capture window. I noticed at the top of the capture window were some info. The info stated, "Capture device is offline". I went into Premiere Pro Cs5 to Edit and Preferences. I changed the Device Brand to Sony and the Device Type to Standard. So far, nothing has been captured. I would like to know how can I fix this problem. I know this is a lot of information, but that's the only way to state my setup and what was done. Thanks.
Gerald Sr.

The easy way is with the DVD in your PC's optic drive use Explorer to navigate into the Video_ts folder and there you will find the VOB file
If you cannot see the file extension highlight the folder and right click, select properties and from the Tools menu select folder options then in View uncheck Hide extensions for known file types.
Then you will see the .VOB file extensions.
Copy the large VOB onto your hard drive then click on it and select re-name.
Rename the .VOB to .mpg and use this file.
There is some free software VOB2MPG which does the same job but far easier.
As for learning PP go to the Creative Cow website and search there for video tutorials, there are plenty from absolute novice to full on expert.
Enjoy PP

Shorten the length of the tabs?

I'm not sure if I pushed something to change this, I need help changing it back.
Now
How it used to be
I know they're different browsers but they're just there to compare.
I want to shorten the length of the tab so that it's not taking up the whole bar. It just annoying me for some strange reason.

I'm not sure if I pushed something to change this, I need help changing it back.
Now
How it used to be
I know they're different browsers but they're just there to compare.
I want to shorten the length of the tab so that it's not taking up the whole bar. It just annoying me for some strange reason.

How do i make a still image (photo) fit the length of the music? I record music and want to put the tracks to a video file with a still image of my business logo in the background. Any help?

How do I make a still image (photo) fit the length of the music? I record music and want to convert the tracks to a video file with a still image of my business logo in the background. On windows movie maker you could just select "fit to music" but this program isnt as easy to figure out! Any help?

Double-click on the still image in the project timeline to open the Inspector. In the Inspector, adjust the duration by typing in a new duration to match the length of your music. I think the limit for a still image is 10 minutes. If you need more than this, simply drag the image into the timeline again then adjust its duration. The two images will play seamlessly (no gap will be visible).
See this iMovie Help topic:
http://help.apple.com/imovie/#mov3a883915
You can achieve more precision when entering durations by changing a preference in the menu item iMovie Preferences. Check (tick) the preference for Show Time As HH:MM:SS:frames. This will enable you to enter the duration of stills down to the frame level, rather than full seconds (NTSC is 30 frames per second; PAL is 25 fps). When entering times, type a colon between each time segment, such as 2:50:15, which represents 2 minutes 50 seconds and 15 frames. For 5 seconds 20 frames you would enter 5:20 and so forth.
Note that the music will only run to the length of the video in the timeline (in your case, the still images). So, after increasing the stills duration you will need to drag the end of the music track as far as required. The stills can be dragged inwards to reduce the duration if necessary.
John
Message was edited by: John Cogdell - added Note

How to increase the length of the subject line in email using FM

Hi
we have maintained 50 characters for the subject line initially, but some subjects are having more than 50 characters. how can we increase the length of the subject line in email.
urgent.
points will be rewarded generousely.

Hi Rana,
In this case, you have to create a user defined field of required length under Journal Transactions Header to fill the data.
Regards,
Vijay Kumar
SAP Business One Forums Team

How to increase the length of the identifier?

I want to create a table with a column name as:
"domainnameregistrationassistance"
oracle 9i does not allow me to do this.
as the identifier length is fixed to 30 characters.
how do i increase the length of the identifier?
any help on this will be great!

Don't forget that there is a comment space for each table
and column, so calling the column DNR_ASSIST doesnt
revent you from doing ...
COMMENT ON TABLE M_SCHEMA.DNR_ASSIST IS '
Domain Name Registration Assistance';

How to restrict the length of the input?

Hi all, could any one tell me how to restrict the length of the input string? My SOA Suite is 10.1.3.1
I tried the following; getting an error.
<element name="RestrictLengthProcessRequest">
<simpleType name="SSN">
<restriction base="string">
<length value="10"/>
</restriction>
</simpleType>
where RestrictLengthProcessRequest is the message name of the corresponding .wsdl and SSN is the input whose length is to be restricted.
The error is : 'Attribute name not defined on element simpleType'
Thanks in advance.
Edited by: user11275112 on Aug 27, 2009 11:44 PM

Hi swathi,
For this you have to create a simple data type. No need of writing a code.
Go to Dictionaries -> Local Dictionary -> Data Type - > Simple Type - > Right click and "Create Simple Type".
Here you should create a Simple type with String as built-in Type. Here you will also see the Length Constraints option.
Set the value of maximum length and minimum length. In your case set the value of maximum length to 10. At runtime this will not allow the user to enter more than 10 characters.
Now create an attribute and bind it to this newly created simple type. Bind the value of the input field with this particular attribute.
Regards
Manohar

How to find the length of the resultset

how to find the length of the resultset

(Doing a select count as somebody suggested is nota
good solution, as the count can change betweenyour
count query and your real query.)And the number of rows can't change between getting
the last one and doing the actual work?I don't think so. Once you've got the ResultSet, I don't think it will change under you, unless you explicitly set it to SCROLL_SENSITIVE.
I could be mistaken though.

How to fix the length of the output file

hi,
I have 1000 records in my source table which need to be inserted into file. But the length of the rows in my file should be only 500 i.e there should be two files getting created for this 1000 records i.e my each output file should contain only 500 rows not more than that.
Depending on the number of records present in the source, the file getting created will be varying as my file should contain only 500 rows each. for ex: if 5000 rows are present then 10 files need to be created.
How this can be achieved in ODI.
Thanks in advance

I believe this can achieved using jython easily .
Here is a sample output code
Command on Source - Select database Technology and required logical schema
Command on Target - Jython
import java.sql as sql
import java.io as io
import string,re
import java.lang as lang
import java.text as text
myCon = odiRef.getJDBCConnection("SRC")
myStmt = myCon.createStatement()
my_query="SELECT * FROM SCHEMA.TABLE_NAME "
file_count=1
i=1
myRs = myStmt.executeQuery(my_query)
writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
md=myRs.getMetaData()
collect=[]
while (i<= md.getColumnCount()):
    collect.append(md.getColumnName(i))
    i+=1
header=','.join(map(string.strip,collect))
#writer.write(header+'\n')
myRs = myStmt.executeQuery(my_query)
md=myRs.getMetaData()
myRs.setFetchSize(5000)
i=0
while (myRs.next()):
    j=1
    col=[]
    while (j<= md.getColumnCount()):
        col_type=md.getColumnTypeName(j)
        col_name = myRs.getString(md.getColumnName(j))
        if col_name is None:
            col_name= ''
        col.append(col_name)
        j+= 1
    data=','.join(map(string.strip,col))
    writer.write(data+'\n')
    #print data+ '\n'
    i +=1
    if (i == 500):
        writer.flush()
        writer.close()
        file_count +=1
        writer=io.BufferedWriter(io.OutputStreamWriter(io.FileOutputStream('c:\\FILE_'+str(file_count)+'.csv')))
        i=0
writer.flush()
writer.close()
myCon.close()Please run this code and let me know if you need any other help or modification to get your desired results.

How can I know the length of the image data section of a PSD file

I'm a C++ programmer developing a project to parse PSD files, and it's necessary to know whether there is a length field indicating the length of the image data in image data section of a PSD file, if not, how can I know the length?
Thank you.

Sorry I can't help, maybe there is some information in the SDK?
http://www.adobe.com/devnet/photoshop/sdk.html
Or someone might be able to help in this forum?
http://forums.adobe.com/community/photoshop/photoshop_sdk

How to increase the length of the Info object

Hi All
Any one have idea about how to increse the length of the Info object Char(beyond 60). Can you please explain me in detail we are using BI7.0.
Thanks
Vani

Hello Vani,
You cannot increase the length of an info-object beyond 60 chars.However if you want to store a characteristics data with more than length 60, then you may create separate info-objects
for example: if you need to store 'notes' which might have length more than 60,
then you may create info-objects like notes 1/3 ---store first 60 chars.
notes 2/3 --- store next 60 characters and so on.
Thanx
Priyanka

How to reduce the length of the info object that's being used?

Hi All,
I have created info objects and used them in a DSO. Now I want to reduce the length of the info objects but i'm unable to do it. When I reduced the length and tried activating the Info object, it's giving me error and the info object is not getting activated. Please guide me how I can reduce the length and activate the Info Object.
Thanks
Hima Bindu

Reducing the length of an infoobject is not that easy
Cleanest way -
Drop all transaction data for that infoobject
Drop all data in the DSO and cubes.
Reduce the length and then activate and transport all the infoobject and there dependence objects.

How to Sort by the length of the returned value from a query.

Hi,
I was wondering if it is possible to sort by the length of the returned value from a query?
For example if I want to get a list of people with the name 'Samuel', I would like to short by how short the length of the whole name is.
Sort by length of the name in SQL
Samuel Syda
Samuel Indranaka
Samuel Johnsons
Samuel Longhenderson
Thank you.

Hi,
Sorting is done by an ORDER BY clause at the end of the main query.
In most cases, you can ORDER BY any expression, even f it is not in the SELECT clause. In this case, it sounds like you just need:
ORDER BY LENGTH (name_column)
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all the tables involved, and the results you want from that data.
Post your query, using an ORDER BY clause like the one above, and point out where that query is producing the wrong results, and explain, using specific examples, how you get the right results from the given data in those places.
Always say what version of Oracle you're using (e.g. 11.2.0.2.0).
See the forum FAQ: https://forums.oracle.com/message/9362002

How do I shorten the length of the timeline in Adobe Premiere Pro?

Similar Messages

Maybe you are looking for