How do I show ACL hits for ACL's used in policy maps?

Is there a way to display the hit count against ACL entries when the ACL is used for policy maps, QoS classification etc?
The manual shows how to do this for an ACL when its attached to an interface. Also there are options for a location, it doesn't match for any of the presented locations, but does give the option for a `word' to be entered.

Hi Michel,
I have spent some time trying to figure out the syntax for this command, I see how to do it if the ACL is applied to an interface, but not if its used for a policy map or qos policy. Its not clear from the command guide.
What do I use for location assuming this is the way to do it for this type of ACL? I have a read through the configuration guide, its not clear if I can look at these counters or not.
Andy

Similar Messages

How can I show icon Services for Object in PA30 Infotype 0019

Hi guy.
How can I show icon Services for Object in PA30 Infotype 0019 ?
This icon display in some infotype example infotype 0024(Qualifications).But I wanna use in Infotype 0019.
I don't wanna use menu "Assign facsimile".
Best regards.
Chutima.

Sorry - should have said I'm using JDev 10.1.3.0.4 with JSF & ADF BC.

How do you show thumbnail images for the contacts?

How do you show thumbnail images for the contacts on the iPod?
-Thank You

In another thread I posted a suggestion to try when the iPhoto app in the Application folder will not work:
after upgrading the OS, iPhotos (and Aperture for that matter) should still be in the Applications folder...
And running well in 10.10.3.
If it stops running in a next "update" do not throw it away: most apps will continue running as follows:
In the Applications folder "rightclick" (CTL+click) the iPhoto app, then "show package contents", then click the MacOs folder open: you see the real app (dark grey), rightclick this and choose "make alias", an alias is made, move this alias to the Applications folder and use it to run iPhoto.
Same for Aperture.
In older OS this survived several upgrades....
Lex

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_0

How to Assigning the number ranges for Purchase Order using EXIT_SAPMM06E_001 using Functional Module NUMBER_GET_NEXT explain me ?

Hi,
First go thourh the FM import export parameters list.
Try to create an internal table of type INRI-NRRANGENR for number ranges.
We can provide the lower and higher values for this table so that what ever PO is created will be with that range.
Try to create the ncessary ones using this FM.
In the Exit, EXIT_SAPMM06E_001,
the Export parameters are-
EKKO-EBELN- the PO ios created with in that specified range
Range as INRI-NRRANGENR - Here try to assign the Internal table that was populated in the FM.
Try to code this in the Include provded and keep Breakpint and check the PO number generated.
Reply if u need more help on this.
Reward if helpful.
Best Wishes,
Chandralekha

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

Pop Up blocker exceptions are not saved in the browser for use, the next time the PC reboots. How do you save these exceptions for long term use?

In case you are using "Clear history when Firefox closes":
*do not clear the Site Preferences
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
If you have software like Advanced SystemCare (Surfing Protection feature) that might reset some files to older versions to protect these files against changes then check the settings or uninstall this software.

How do i get a colormap for intens graph using basic imaq

This is a follow up to
http://exchange.ni.com/servlet/ProcessRequest?RHIVEID=101&RPAGEID=135&HOID=506500000008000000B58D0000&UCATEGORY_0=_49_%24_6_&UCATEGORY_S=0&USEARCHCONTEXT_TIER_0=0&USEARCHCONTEXT_TIER_S=0&USEARCHCONTEXT_QUESTION_0=how+do+i+get+a+colormap+for+intens+graph+using+basic+imaq&USEARCHCONTEXT_QUESTION_S=0
where I asked for help getting a colormap for saving an image as a jpeg. Now, I have decided that I would like to use an intensity graph for my display of the RGB image that I have captured using my pci-1411 frame grabber board. How do I get the right colormap for the intensity graph display? I do not have vision and do not intend to purchase it. I am using the basic IMAQ package.
jc
Mac 10.4
LV7.1
CLD

Dear Sir, usually the intensity graph will help you with monochrome images, since they have a one color intensity. If you want more colors you will be able to get up to 256, and not true color (24 bit). You might want to use the Picture Control instead or a Child Window approach, please look in your Help menu, 'Search IMAQ Examples...' and then browse for IMAQ examples and choose the ones that are for Picture Control. For the Child Window look in our website for an example called 'IMAQ Display Without IMAQ Vision'.
Good luck!
Nestor.
Nestor
National Instruments

Is there a limit to how many pages i can have for one website using muse/business catalyst?

is there a limit to how many pages i can have for one website using muse/business catalyst?

Thank you. I've been searching everywhere and I couldn't find anything the mentioned it. I appreciate the feedback!

How to find out the script for the table using SQL

Hi,
Could any one tell me that how to find out the script for the table using SQL.
Thanks,
kamal

Kamal,
You can find the SQL query in Advanced tab of Answers
Thanks,
Balaa...

Is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)

function displayMap(e) {
var title = e.data.title,
latlng = e.data.lat + ',' + e.data.lng;
if (typeof device !='undefined' && device.platform.toLowerCase() == 'android') {
window.location = 'http://maps.google.com/maps?z=16&q=' + encodeURIComponent(title) + '@' + latlng;
} else {
$('#map h1').text(title);
$('#map div[data-role=content]').html('<img src="http://maps.google.com/maps/api/staticmap?center=>' + latlng + ' &zoom=16&size=320x420&markers=' + latlng + '&sensor=false">');
$.mobile.changePage('#map', 'fade', false, true);
my phonegap (Adobe press, Powers jQuery with dw 5.5) book (old book (c)2010-11) says for above code: // is this valid for today, is this the right to use or for iOS can use dynamic google maps embeded(can be embedded fo iOS)???
On iOS, calling window.location loads the map directly
into the app. That’s great until you realize that iOS devices
don’t have a Back button, so there’s no way to exit the
map. To get round this problem, I loaded a static map as
an image in the map page block. It’s not interactive, but at
least you can continue using the Travel Notes app after
viewing the map by clicking the Back button generated by
jQuery Mobile.

Well, this took me a while to get solved, but it is indeed solved.
I tried USB Overdrive and it could, and perhaps should work, but apparently it will not. When adding a device, it seems that USB Overdrive is not set up to handle any input device that does not register itself as either a Mouse or a Joystick. The VEC USB Footpedal that I'm using is "Device type: Other".
So, I went for Quickeys. And Quickeys can do it all. It did recognize the device, I was able to assign it to the scope of the particular audio playback app I wanted to use (Amazing Slow Downer OS X - which is truly amazing. Any musicians reading this who are looking for a way to learn pieces by ear, this does it better than anything else I've seen yet).
I created a shortcut in Quickeys for the ASD app; added the middle button of the foot pedal as the trigger; set one step, entering 'space bar' as the step (which toggles playback, similar to many audio players).
It all worked.
Quickeys is very confusing and seemingly featured with an endless array of options. Enter at your own risk. Ask me for help. This was the only way to get it done that I could find. I did write to the author of USB Overdrive asking him to please support additional devices as I did find some traction from gamers who like to use a foot pedal in addition to other input devices. There was a Windows-only management utility for the foot pedal that was intended for custom input, assigning the buttons to any keyboard input or mouse click event. It would be nice to have a simple and easy to use utility like this. But, Quickeys did do the job.
Thanks for your help, you guys!!!

How to make a good UI for channel selection using DAQmx

A lot of my Labview programming was with earlier verisons of labview (pre Labview 7), and there are a ton of new features that I'm trying to digest (currently using Labview 8.2).
My question is (in general terms), how are people programming their UI for selecting channels and such when using DAQmx hardware? What I have in mind is a compacDAQ system with a number of modules. The user would be able to pick and choose which channels to monitor. Using MAX as part of that process seems counter intuative, and somewhat static (yeah I know you can change it there, but it feels more like something you would use for something that really doesn't change much). I'd like all the UI to be within the VI.
Are programmers using the create task VIs for that or something else?
Thanks in advance.
Solved!
Go to Solution.

I wholeheartedly second the motion to keep MAX out of the picture as far as users are concerned.
Setting up UI's for channel selection is a breeze in DAQmx when you create channels on the block diagram. The control you create off the Channels input will populate itself with the inputs that it knows are capable of performing the desired task...
<<< My configuration knows that my Module 5 is capable of doing Analog Input.
So... Just create a panel that waits for the user to select the proper channel. I also run a quick check of the user's selection before creating / starting the task. For example, if they choose ai30 or higher, and I know that the system isn't wired for those inputs, I'll not allow that selection. Also check for using two of the same input, etc.
Richard

OS 10.10 how to hide/show a folder with a password using terminal

In Yosemite 10.10.2 Terminal Can you please tell me how to hide/show with a password then show again on already existing folder created on a system drive and also an external drive. Please provide the path text to folder name "wbfiles". Thank you Winwoodb

You can drag it from one place on a drive to another. If you are moving it from one drive to another then it copies it. If you are moving it on the same drive and are getting that message then not being able to move the folder is the least of your problems. Free up space immediately because your computer is about to crash and probably lose files. Then you'll have lots of space.

How can I set up Lync for my personal use?

How can I set up Lync 2013 for my personal use. I don't have any personal domain (using outlook, hotmail etc) or any server. Is there a way, I can still set up Lync on my PC? Please advise.

You can't use a personal email account (MSN/Gmail/etc..)
to sign into the Lync client. You can purchase an account from Lync Online: http://office.microsoft.com/en-us/lync/lync-online-overview-and-features-online-meetings-and-instant-messaging-FX103789571.aspx

How add new tab after reason for rejection tab using tcode va01

Hello,
How to add new tab after Reason for Rejection tab using tranzaction code VA01.
pls suggest solution.

I don't think you can add a tab after reason for rejection tab. There are custom tab, which you can use for your convenient, given by SAP. You can look into the below details:
Program : SAPMV45A
Screen: 8459(Item) and 8309(Header).
Kuntal.

How to add style(color) info for the color used in ALV tree nodes

I have an object for CL_GUI_ALV_TREE and I have added nodes to the tree and has set color for the nodes using 'STYLE' parameter. Now if I have to add the style info to the style(color) then how do I do it using the object I have?
Edited by: Sujay V Koparde on Feb 20, 2008 4:27 AM

Yes Eshwar, its similar to what you have written but my problem was that the style has already been assigned in the code and now I want to assign the style info(tooltip text) to the style(colour). I have an object of class cl_gui_alv_tree as of now and I am not able to find out as to how do I proceed to assign style information

How do I show more information for result set, I need company name, company address and company phone number to show. Now it is just company name and company address no telephone number, I need the number to show as well in the first result set

The result set I get for a search now only shows the company name and address, if I want the telephone number of the company in the result set, I have to click on the link to go the site information to get the number. I want the company name, address and phone number to show up in the result set without having to click on each hyperlink to get the telephone number...

???
See my profile at the left for information you are missing.
Who, when, why, how, how much, what is the URL

How do I show ACL hits for ACL's used in policy maps?

Similar Messages

Maybe you are looking for