How do I Show date and time when I hover over clip like in iMovie

How do I get FCPX 10.6 to show date and time when I hover over a clip? I can so it in I movie and as I move over my clips the date/time is shown. I need it for that specific point in the clip not just the record start time.

I realize that my needs are outside of the normal editing workflow. I am a private investigator and last week I shot over 6 hours of surveillance video on a Sony video camera. Within this 6 hours of video there is at most 2 minutes of actual footage of my subject. So what I wanted to do was just import the parts of the clip I want, so I can avoid importing the whole 6 hours, and then add a text title of some sort that shows the date/time. My problem is that once I get this clip I have easy way of establising the TOD short of taking the clip capture time and then counting up using the SMTPE Timecode. In this regard iMovie makes it easier because I can just hover over the clip and see the TOD of that specific frame. iMovie on the other hand would force me to import the whole 6 hour video so i'm left moving between both programs which is less than ideal.

Similar Messages

  • How do i show date and time info of videos in Iphone as they appeare before import in iPhoto?

    How do i show date and time info of videos in Iphone as they appeare before import in iPhoto? or even as they appear on the iPhone itself? The selection on tool bar for show info is greyed out.

    Welcome T G Brown to the  iMovie boards..
    the socalled timestamp is within the imports.. if you select a clip in iM and hit the key combo Apple-I, you can see recording time and date.
    unfortunately, this info isn't delivered to any software. Bruce Gee (geethree.com, excellent plug-in maker) told us, there's no 'API' he could use for such a feature...
    same on the pro side, read this discussion at the FinalCutExpress boards:
    http://discussions.apple.com/message.jspa?messageID=7982935
    Forum member Ian offers a solution with a 3rd party app ....
    so: pen&pencil and typing timestamp manually into any 'Title' seems to be your only option...

  • How to check the date and time when a material is blocked

    Hello,
       Please tell me how can i check the date and time when a material is blocked or unblocked.
    Regards,
    Priyanka

    Hi Pryianka,
    Are you speaking about blocked status of material master ('X-plant matl status' > MM03 > Basioc view 1; 'Plant-sp. matl status' > MM03 > MRP 1) or your problem is to find out the date when your material was booked into blocked state (stock category).
    If your problem is about mmr you can use the above mentioned MM04 (or MM03 > menu > Environment > Display changes).
    If your problem is to find out when your goods were posted to blocked stock you have to use MB51 + relevant movement types (e.g. 103, 344) + batch + etc. ()
    BR
    Csaba

  • Showing date and time not in the big sidebar

    in the previous version i could see the date and time in a little window in the left bottom corner (when info was open) in the existing sidebar. i liked that very much.
    now i can see it only in a very wide sidebar on the right when info is open. i don't like this very much.
    that right sidebar takes a lot of place. i see a lot less photo's on the screen..
    is there a option or hack to see the date and time when i hover above, or click a photo, on a existing top or bottom bar? space enough there...
    cheers...

    Afraid not.
    Regards
    TD

  • How to show Date and Time with TimeZone

    Dear All,
    I have to show Date and Time with TimeZone abbreviation,
    for example:
    1) 31 March 2011 2:30 in india standard time - it should show in screen 31 March 2011 2:30 IST.
    2) 31 March 2011 2:30 in Australia/New Zealand - Eastern time zone it should show in screen 31 March 2011 2:30 AEST.
    how can i show *Australia/New Zealand - Eastern time zone to AEST*,
    I tried with format DD MMM YYYY HH:MM zzz, and i looked time zone API too.
    Appreciate your help
    Thanks
    Daya

    Dayananda wrote:
    ok, than i have to use zzzz format, as z won't help in my case, so i have to use zzzz which display descriptive value like, Indian Standard Time i.e. ISTPer the javadocs there is a very specific reason why that is a problem especially if you intend to support many timezones in one application.
    "+For compatibility with JDK 1.1.x, some other three-letter time zone IDs (such as "PST", "CTT", "AST") are also supported. However, their use is deprecated because the same abbreviation is often used for multiple time zones (for example, "CST" could be U.S. "Central Standard Time" and "China Standard Time"), and the Java platform can then only recognize one of them+."
    Thus you have one single case where there can be many and moreover it can change (twice a year I believe.)
    There is a standard source for this information although when I tried it it appears to not work.
    If the app only needs to display one zone then provide a configuration value that allows a user to overload the display value.
    If the app needs to display many values then you MUST inform business users of the problem because there are duplicates and they, not you, need to decide specifically what happens in those cases.

  • Show date and time in menu bar won't stay selected

    Using 10.6.7 with all updates as of the time I am writing this.
    Show date and time in menu bar is unselected and unselectable. When I select it (click it) it will unselect itself. I will see the checkmark for 1/2 a second, but won't stay selected.
    I've reparied permissions in the Disk Utility as described by a similar post (on an older version of the OS) with no luck.
    At a little bit of a loss. Spending the mandatory 30 minutes with various forms of Google searches with no luck.
    Looking for new ideas other than an OS restore.
    David

    Looking for new ideas other than an OS restore.
    Restart?

  • How to pass system date and time with tabular from in Update only Mode.

    Dear Friends,
    i have created tabular form with UPDATE Only .here i am assigning work to another multiple users.i want to insert system date and time when i assign work to multiple users.
    How can i insert system date and time into table using tabular form in Update Only Mode.
    beacuse i have pass in default system date it's working only with add row button.
    How can i pass system date and time in update mode in tabular form.
    Thanks

    Hi,
    You just create a trigger on the table on which you build your tabular form:
    e.g:
    CREATE OR REPLACE TRIGGER  "AUDITING"
    before insert or update on "MYTABLE"
    for each row
    begin
        if inserting then
            :new.created_on := localtimestamp;
            :new.created_by := nvl(v('APP_USER'),user);
        elsif updating then
            :new.updated_on := localtimestamp;
            :new.updated_by := nvl(v('APP_USER'),user);
        end if;
    end;Regards,
    Fateh

  • How to capture the date and time of  a background job

    Hi experts,
    How to capture the date and time of  a background job?
    How to find whether it is runned succesfully or not?
    If it is not successful how to put error message?
    ASAP
    Thanx in advance,
    Sudha

    To Display the STATUS of the JOB which is exectued in background
      CLEAR : wa_jobsteplist.
      REFRESH : i_jobsteplist.
      WRITE:/ 'DISPLAYING JOB STATUS'.
      CALL FUNCTION 'BP_JOB_READ'
        EXPORTING
          job_read_jobcount           = w_jobcount
          job_read_jobname            = w_jobname
          job_read_opcode             = '20'
        JOB_STEP_NUMBER             =
       IMPORTING
         job_read_jobhead            = wa_jobhead
       TABLES
         job_read_steplist           = i_jobsteplist
    CHANGING
       RET                         =
       EXCEPTIONS
         invalid_opcode              = 1
         job_doesnt_exist            = 2
         job_doesnt_have_steps       = 3
         OTHERS                      = 4
      IF sy-subrc <> 0.
        MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
      ENDIF.
    To Display the status text as per the status type
      CASE wa_jobhead-status.
        WHEN 'S'. WRITE: / 'Scheduled'.
        WHEN 'R'. WRITE: / 'Released'.
        WHEN 'F'. WRITE: / 'Completed'.
        WHEN 'A'. WRITE: / 'Cancelled'.
        WHEN OTHERS.
      ENDCASE.

  • How to view current  date and time on SAP screen

    Hi Everybody,
    How to view current  date and time on SAP screen .I have set time zone in T-code STZAC.now iam getting correct date n time in my tranctions but i want to check without any tractions
    Plz repay,Regards,
    Sadik.

    Hi,
    You can check the time by running a report .
    It will show the database and central instance time : Report name :rsdbtime
    Thanks and Regards
    Vijay kumar G
    Edited by: vijay kumar gopal on Mar 4, 2008 1:09 PM

  • How Production Order finish date and time is being comptued by SAP?

    Hello Expert,
    How Production Order finish date and time is being comptued by SAP? for example, we create a Production Order via CO01, the basic start date is 29.09.2008 and time is 04:00 it gives us basic finish date is 29.09.2008 and time is 13:28.
    how does SAP compute the time 13:28 as it finished time
    Please explain me briefly.
    Thanks
    Ryan

    Hello Guys,
    When we create Production Order in R/3 the time is calculated by routing but it is extended at SetUp machine time. It is not correct?. SetUp imachines time used only for first Production Order for the same product and it is plan manually, for others Production Order we need calculate time for production without SetUp machine time being pick up to compute finish time. how could we achieve this? only those Machine time will be check.
    thanks

  • How to get system date and time?

    Can someone show me a code on how to get system date and time.
    Thanks!

    there is one really easy way to get system time, the api gives a great example of code on this. use gregorian calendar, which you'll find in the api under GregorianCalendar. You only need to create one instance of GC, ie Calendar time = new GregorianCalendar();
    you save seconds, minute and hours into int values, so you don't have to access the system time every second, you can create a thread which adds one to the int second value, if oyu see what i mean, for example, i have saved the hours, minutes and seconds as int values;
    int hour, minute, second;
    i can then create a thread (Thread thread = new Thread(this) and run it like:
    Calendar time;
    int hour, minute, second;
    Thread thread = null;
    public MyTime() {
    hour= time.get(Calendar.HOUR_OF_DAY);
    minute = time.get(Calendar.MINUTE);
    second = time.get(Calendar.SECOND);
    if(thread == null) {
    thread = new Thread(this);
    thread.start();
    public void run() {
    Thread t = Thread.currentThread();
    while(thread == t) {
    thread.sleep(1000);
    second++;
    if(second > 59)
    minute++;
    if(minute>59)
    hour++;
    formatTime();
    public void formatTime() {
    second = (second > 59? 0 : second);
    minute = (minute > 59? 0 : minute);
    hour = (hour > 23? 0 : hour);
    System.out.println(hour+":"+minute+":"+second);
    public static void main(String[] args) {
    new MyTime();
    I know this looks like gibberish but it should work. If not, try to fix the problem, i have written from memory really but i guarantee you, this gets the time then every second, simply adds one to the second and then formats time. You can also access the day, month and year then format them using the above code. I don't like giving code since you should really do these things yourself but it is 2:04am, i have nothing better to do and i am not tired so i did you a favour - i have become what i always did not want to, someone ho stays upall night writing code.

  • How do I set date and time on apple tv?

    How do I set date and time on apple tv?

    Fixed the same problem, STEPS
    1. Reset your apple TV
    2.It will again stuck on that setting, ignore it by press menu
    3. Unplug ethernet wire
    4. Try to connect with wifi, it should be work with wifi connection as mine.
    5. Then you can switch back Ethernet wire after get fixed.
    Thanks. Lemme know dude if it's work.

  • How to find the Date and Time of Modification of Column in aTable?

    Hi all,
    Do  you know how to find the Date and Time of Addition of Column to a Particular Table?.
    I know however, How to find the modification time of the Table. Using the below Query :
    Select Object_Name, to_Char(Last_DDL_TIME, 'DD-Mon-YYYY HH24:MI:SS') Last_DDL from User_Objects where Object_Type = 'TABLE';
    Object_Name
    Last_DDL
    Employee
    20-Aug-2013 09:23:03
    I wanted to know the Creation or Modification Date and Timestamp of all columns of Employee Table?. Is it possible at all. If possible, How to get it?.
    Regards,
    Bhaskar M

    I agree with you on that. Since its a development enviornment I can remove the column but that not my point here.
    My whole purpose it to know whether we get the Column's Creation or Modification DateTime.

  • How to get the date and Time?

    Hi,
    I am using Jdev 11.1.2.0.
    I had one database table. In that table one variable as bgnDtm and the datatype as oracle.jbo.domain.Timestamp. In my Impl class I declare one variable as beginDate(DateType as oracle.jbo.domain.Date).
    Now I am using the conversion as beginDate=(Date) SampleVO.getAttribute("bgnDtm ");.If I using this scenario I got the Type cast error. so how can I separate Date and Time value.
    So how to do. Please provide some suggestions.
    Regards,
    Ragu.

    you can get the time value either from oracle.jbo.domain.Timestamp or from oracle.jbo.domain.Date
    oracle.jbo.domain.Timestamp timeStampDate = (oracle.jbo.domain.Timestamp) SampleVO.getAttribute("bgnDtm");
    Time time;
            try {
                time = timeStampDate.timeValue();
                System.out.println(time);
            } catch (SQLException e) {
                e.printStackTrace();
            java.sql.Date sqlDate=timeStampDate.dateValue();
                oracle.jbo.domain.Date jboDate=new oracle.jbo.domain.Date(sqlDate);
            Time timeValue = jboDate.timeValue();
            System.out.println(timeValue);Edited by: M.Jabr on Dec 23, 2011 1:55 PM

  • Camileo S20 - How to display the date and time

    Hi, to all. I have got as Christmas present the Camileo S20 and I am not able to display the date and time at video. In manual is no mention about this, just how to set the correct date and time. But what is intention of setting the date and time into camera, if it is not possible to display them on video ?

    Hi,
    of course, I did it repeatly, it is written in my question above. I am not stupid.
    This question is aimed to owners of camera Camileo S20 and also Camileo S10 - Camileo S20 is derived of Camileo S10, may be any of them discovered the way how to get the date and time into video.

Maybe you are looking for

  • Error in PO Creation with Excise Tax Code

    Dear I am getting the following error while creating a PO (in sandbox) in MM. No posting rules exist for account key Message no. FF714 Diagnosis No posting rules have been defined for the account key in the tax table in table T007B. Procedure Change

  • IOS4 with MS Exchange 2003 issue

    Hi all, Yesterday I've updated my iPhone 3GS to iOS4. After the upgrade, I'm unable to use my email and agenda. With the iOS3, I received my messages, but after the upgrade it won't sync any more. I noticed that my "deleted items" and "send items" do

  • Intra-Controller roaming and AP Groups

    WiSM 2 controllers running 7.3.101.0 All controllers have the same subnets/dynamic interfaces/WLAN All controllers in same mobility group. Controller1 AP1 has APGROUP1 applied APGROUP1 has SSID1 mapped to DynintVLAN1 Controller2 AP2 has APGROUP2 appl

  • Error A READ-ONLY bind variable used in OUT or IN-OUT context (report6i)

    cf_1 cf_2 balance a 1 3 2 b 3 2 1 c 3 3 0 tot=7 8 3 i am using conditional formatting to hide the cf_1 and cf_2 if balance=0 now i want to display tot should be cf_1 cf_2 balance a 1 3 2 b 3 2 1 tot=4 5 3 tot=a+b+c how can i exclude the hided columns

  • Cf inserts wrong date!

    Hi! I want the registered users of my site to send each other messages. I have a database with 2 tables for the messages: the first is for new messages, the second is for saved messages. When a user logs on & goes to their message inbox the page list