How do i show images in full screen mode?

How do i load a jpg or gif and shows it in an application running in fullscreen mode in the best way?
as it is now, its g.drawImage(theImage,100,100,(image observer))
But what object should i use for the image observer?
The application just runs in a while like this...
while(!quit){
render() which gets a graphics from a bufferstrategy to draw on.
}

I would imagine you would use the Window that you passed to setFullScreenWindow, and override the imaegUpdate() method in your Window.

Similar Messages

How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landsca

In Muse: How to auto rotate Images on Full Screen Slideshow if pictures were taken mixed Portrait and Landscape

There is no way that Muse would automatically rotate the images. What you can instruct Muse to do is whether you want to show all image content and leave blank space in either direction OR scale the image to fill the frame resulting in some cropping, but filling the otherwise blank space.
The options are Fit Content Proportionally and Fill Frame Proportionally respectively.
Cheers,
Vikas

How do I show ratings in full-screen preview?

I'm new to Bridge, so I bet this falls into the new-user silly question category rather than a missing feature. How do I show ratings in full-screen preview?I touch the space bar to get the preview. If I touch a number 1-5, it adds that rating and a little oval box shows up in the lower left with the file name and the star rating. All very nice. Then if I scroll through my images, that same oval shows up for each image, with its respective rating. Again, nice. But each time I first enter full-screen preview, the oval is not displayed. How do I get it to show up, short of adding or modifying a rating? Surely there is some keystroke or gesture.

CharleyBC wrote:
--- How very odd. So the only way I can see the ratings in full-screen preview is to take a potentially destructive action. Adding a rating destroys whatever rating might have already been there.
What I have done for a workaround is to re-rate an image to same value. If I start a sequence of full-screen preview display I'll look at the rating of the first image (one star, for instance) then when image is displayed full screen I'll re-rate it one star. Starts display of ratings in full screen without altering rating. Then, as you mention in OP, I can sequence through images in full screen view and rating will be displayed.

How do I get the titles to show when in full screen mode

Hi I'm having a hard with my title showing when in full-screen mode for imovie. It shows up on the edit screen but not in full screen. Why and how to I change it?

yours is showing all the time? mine only shows when my mouse is at the bottom of the screen.
However it also shows for me in non-fullscreen mode after i've switched to a different Space (in Leopard) and back. Have to go into fullscreen and then out of it to make it disappear.

Please help, cannot compare images in full screen mode

I am not able to compare 2 images in full screen mode. I am using a MBP and a ACD 23". The main image will remain in the ACD while the image being compare is being shown in the MBP.
I am able to compare images in the viewer mode.
My main display is the ACD 23 which I selected using the display preferences under 'Arrangement' with the menu bar located on the ACD. In Aperture, Secondary Viewer is set to Blank.
I had also tried different combinations of Main Viewer and Secondary Viewer settings but was not successful.
Am I missing something? Anyone have the solution?Thanks in advance for any help.
norheng

Anyone have any suggestions to using Aperture to edit images using a MBP and ACD so that it best utilize Aperture full screen mode in comparing and narrowing down to the pick.
I am now trying to use the MBP as the main display and ACD as the secondary. This way I am able to compare images with the MBP in the Browser mode and the ACD display the compare images full screen. It work with the secondary display - ACD set to mirror, span and alternate mode.
It would be best if only one screen is use and hence save energy consumption (reducing global warming and bill, if it help).
Thanks in advance for any suggestions or and solutions.
norheng

How to launch firefox 4 in full screen mode

hello, How to launch firefox 4 in full screen mode. I dont want to press SHIFT CMD F each time? thx

There needs to a be a space before -fullscreen and that switch needs to be placed after the quotes
*"C:\Program Files\Mozilla Firefox\firefox.exe" -fullscreen
But I don't think that it will work. Firefox 4 doesn't have that switch by default, so support should be added via an extension.

How do I get out of full screen mode?

How do I get out of full-screen mode? This happened after installing Lion.

Shift-command-F should get you in and out of full-screen.

How do you get out of Full Screen mode in Excel? No red or yellow buttons visible.

How do you get out of Full Screen mode in Excel? No red or yellow buttons visible. Using just installed Yosemite iOS 10.10.2

I Don't think Microsoft updated it for those buttons. Look for a blue button with arrows in it on the right side of the menu bar.
Also try Esc key.

How to show dock in full screen mode

Hello,
I'm wondering how to get the dock to show up temporarily in full screen mode. When I place my cursor near the bottom of the screen in a full screen app, the dock doesn't pop up. Is this normal and if so, how do I switch between full screen apps without using gestures on the mouse? I'm really hoping that this is a bug.
Thanks

Alternatively you can use the same principle anywhere on the screen, you do not have to scroll to the bottom. Simply move the cursor to the screen edge where your dock is then move the cursor the same direction again. You do have to briefly pause between the two movements but you can do this anywhere the dock is located, it does not have to be at one position on the screen. That should speed things up a bit and prevents the dock from appearing by inadvertently scrolling to the side or the bottom.
If you can, get a Magic Trackpad, Lion navigation works very well with one of these, I think that the days of the mouse are numbered. The numbers of gestures available with the Magic Trackpad is extensive in Lion.

How to show controller in full screen mode

During DVD playing, switching to full screen mode the controller disappears and we can use only the bar at bottom with the essential commands. No possibility to use the rallenty, for instance, which is available opening the drawer of the main controller. The function can be activated through the key board but is not so direct. Does some body know if it is possible to have the complete controller visiblealso in full screen mode?
Thanks

Alternatively you can use the same principle anywhere on the screen, you do not have to scroll to the bottom. Simply move the cursor to the screen edge where your dock is then move the cursor the same direction again. You do have to briefly pause between the two movements but you can do this anywhere the dock is located, it does not have to be at one position on the screen. That should speed things up a bit and prevents the dock from appearing by inadvertently scrolling to the side or the bottom.
If you can, get a Magic Trackpad, Lion navigation works very well with one of these, I think that the days of the mouse are numbered. The numbers of gestures available with the Magic Trackpad is extensive in Lion.

When viewing a note in the bridge how do you switch to landscape full screen mode?

When viewing notes in the Bridge, there are two modes after pressing messages. One is portrait where the note being viewed shows in full screen after going to it from the inbox list. The other is in landscape where the inbox list is on the left and notes on the right. I want to zoom to a full screen landscape view of the note. I know that the device is capable of displaying a note this was as this is what you see when you touch the icon in the upper left corner to go directly to a new note or an urgent one, but I can't figure out how to get there from the normal note display.

There are two full screen modes in FCP X when running in MacOS X Lion.
Fullscreen playback:
     Enter using the double arrow on the viewer or with command-shift-F.
     Exit with the Escape key.
Fullscreen editing:
     Enter using the double arrow on the top right of FCP X's windows or control-shift-F.
     Exit using escape or control-shift-F.
This is how it works for me.

How to open a window in full screen mode using lf_fpm_navigation?

Hi Guys
For the following applications
ESS Application: HAP_START_PAGE_POWL_UI_ESS
MSS Application: HAP_START_PAGE_POWL_UI_MSS
When the user clicks on the appraisal document name, a seperate window(not full screen) is generated to display the Appraisal docuemnt.
The code is as follows:
COMP: HAP_START_PAGE_POWL_UI
Object : COMPONENTCONTROLLER
Method: FOLLOWUP_POWL
Generate the URL to be called.
    CALL METHOD cl_wd_utilities=>construct_wd_url
      EXPORTING
        application_name = 'HAP_MAIN_DOCUMENT'
        in_parameters    = lt_parameters
      IMPORTING
        out_local_url    = l_url.
    wd_this->url = l_url.
    wd_this->display_document( ).
In Method: DISPLAY_DOCUMENT
lv_alias = 'EMPLOYEE_DOCUMENT_UI_OBN'.
use FPM navigation
    ls_nav_key-key1 = 'HAP'.
    ls_nav_key-key2 = 'HAP_GENERIC_UI'.
    lr_fpm_navigation ?= lr_fpm->get_navigation( is_key = ls_nav_key iv_instance_sharing = abap_false ).
    CALL METHOD lr_fpm_navigation->get_key_from_alias
      EXPORTING
        iv_alias = lv_alias
      RECEIVING
        rv_key   = lv_key.
    lr_fpm_navigation->modify_parameters(
         EXPORTING
           id_target_key            = lv_key
           it_application_parameter = lt_appl_param
           it_business_parameter    = lt_business_param    ).
    lr_fpm_navigation->navigate( lv_key ).
Any idea how to open this window in full screen?
Highly appreciate your help.
Thank and Regards
Pramod

Hi Pramod,
This FPM navigation is achieved using settings made in Launchapd Customizing ( LPD_CUST ).
a) Execute Tran LPD_CUST
b) Go to Role HAP - Double Click to open it.
c) Open the second folder on the LHS menu - there you will find 2 entries
d) Click on second entry - in the entry setting you can see that it is configured for WD Application - HAP_MAIN_DOCUMENT
e) Click on button Show Advanced Parameters
f) There you will find a input box named as Window Features - here you can specify window features like
height=700,width=1100,position=center,menu=no,status=no,location=no,menubar=no,status=no,toolbar=no
save the settings come out and test ur app again.
change the height and width and other features as per ur req.
Regards
Manas Dua

How to keep content centered in full screen mode

I've searched all over Google and in here but am surprised to
find nobody else with the same problem!
How do you keep all of the items centered inside a Div when
switching to full screen mode in IE? Everything in my "#global" Div
shifts upwards creating a big mess and doesn't stay where it should
in my content box (which is part of the background. There's no
problems when resizing the window by dragging, just when using full
screen mode. Here is my body and #global code:
body {
background-image: url(images/background2.jpg);
background-color:#ECE5C8;
background-repeat:no-repeat;
background-position: 50% 50%;
margin-top: 4%;
margin-bottom:4%;
#global {
margin:auto;
position:relative;
width: 784px;
height:554px;

> background-position: 50% 50%;
> margin-top: 4%;
> margin-bottom:4%;
Why use a percentage margin?
Can we see the rest of the page?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"afriendofcheese" <[email protected]> wrote
in message
news:g8gaha$oh7$[email protected]..
> I've searched all over Google and in here but am
surprised to find nobody
> else
> with the same problem!
>
> How do you keep all of the items centered inside a Div
when switching to
> full
> screen mode in IE? Everything in my "#global" Div shifts
upwards creating
> a
> big mess and doesn't stay where it should in my content
box (which is part
> of
> the background. There's no problems when resizing the
window by dragging,
> just
> when using full screen mode. Here is my body and #global
code:
>
> body {
> background-image: url(images/background2.jpg);
> background-color:#ECE5C8;
> background-repeat:no-repeat;
> background-position: 50% 50%;
> margin-top: 4%;
> margin-bottom:4%;
> }
>
> #global {
> margin:auto;
> position:relative;
> width: 784px;
> height:554px;
> }
>
>
>
>
>

How do I get out of "full screen mode" on my tablet?

I don't know how I got into full screen mode first of all and I can not figure out how to get out of full screen mode. I have a tablet, my toolbar with the menu symbol is missing at the top and the bar at the bottom is missing. I don't have any keys with "F" features, so I can't press F11. Does anyone else have this problem? I have windows 8.

Argh. There aren't many things more frustrating than an app hogging your entire screen.
Do you have a compact keyboard? If so, there should be a key labelled ''fn'' and another key which is labelled ''F11'' (maybe in blue writing). Try holding down fn and press the F11 key.
Alternatively touching or swiping right at the very top of the screen should reveal Firefox's toolbar - you can press the [[Image:New Fx Menu]] at the top right and then select ''full screen'' to shrink Firefox back down to size.
Hope those ideas help! :)

HOW DO I GET OUT OF FULL SCREEN MODE AND BACK TO THE HOME PAGE?

I was at a website and expanded the view to full screen mode. i pressed ESCAPE but it would not return the screen to smaller size. I had to press CONTROL+ALT+DELETE end the session. Now, when I restart Firefox it wants to restore the session. I have no status bar at the top and returning to home page. I hope this information helps.

Thank you very much! I tried that already but did not move the cursor high enough.
Dear Apple designers: please bring back something like a button, to help those who can not find this type of thing. Minimalistic design should be in such way that you find how to do these type of things without going to a forum.

How do i show images in full screen mode?

Similar Messages

Maybe you are looking for